EASY FIX: Blinkers or Flashers Not Working

[@kaechup]

This just happened on my car and I thought, “Great, another expensive repair!” I can TOTALLY do this myself. Thanks so much for taking the time to make this.

[@TightWadDIY]

Yes! This is super simple!

[@aaliahfuller1609]

Right !

[@oddpeople8733]

Oh my goodness thankyou 😭😭😭 i just moved to a new state alone by myself and its such a small town its one of those it takes 2 months to get your vehicle fixed kind of thing and they charge like 500$ to do anything, im a cna with no mechanical experience yet i managed to find my box and the fuse and all i needed to do was take it out and put it back in. You're a life saver honey im too broke to get my truck fixed

[@usaman7358]

Believe it or not your video is helping someone 7 years later! Thanks

[@TightWadDIY]

Glad it helped!

[@GregGantt-t8o]

Same here. 🤙🏻

[@Cars4theLo48]

Wow! Life saver. My fuse was still connected didn’t show blown. Put a new fuse in and bam! Flashing green arrows again. Thanks man!

[@TightWadDIY]

That’s great!

[@davekalu8458]

Hey man was that the end of your problems or did the fuse blow again for you?

[@Cars4theLo48]

@@davekalu8458 it worked just fine. Ended up selling the car.

[@emersonhernandez7215]

Thank you so much, I am non native speaker and it is kind of difficult try to understand what the manual says but you explained perfectly thanks!!

[@davida6146]

Did it work?

[@TightWadDIY]

Great! I’m glad you found it helpful.

[@felipeamayun7155]

Sir I just to know where s the location of flasher relay for 2017 model toyota hiace commuter. Thanks

[@GregGantt-t8o]

I have a 2010 Tundra and need to change a broken drivers side door check. My first thought was door panel removal, you clearly explained it and instead of getting started, I decided to watch more of your videos. lol your videos are awesome!! Straight to the point and very well demonstrated. Thank you.

[@TightWadDIY]

I’m glad you found them helpful

[@irl8796]

Seems like 95% of people in New Jersey have this problem.

[@TightWadDIY]

Haha. It does seem to be more and more common that people don’t use their blinkers.

[@joedevitto6113]

What was the problem with it ?? was it a major fix or something simple.. i cant seem to figure mine out at all. and i keep spending money

[@g.r.o1665]

I need help my right blinker its not working left one worls fine

[@titosantana5678]

@@TightWadDIY dřt4Rtŕrra4fat⁵rß

[@fffvuk4085]

Walk through

[@justdoandrun7549]

Very helpful...I simply used your technique and I saved over $80 ...the mechanic was ready to reap me off.thank you so much

[@TightWadDIY]

Glad it helped

[@kuinflushingchinatown9759]

It works!!!. Now my Blinkers are working again. If I did not watched your video I would buy totally unnecessary parts and would waisted my money. Thank you for your VIDEO.

[@TightWadDIY]

That’s great! I’m glad they are working again!

[@Swgrup094]

Dude u r a beast all day yesterday I was freaking out looking at my fuse box little did I know i had to check my fuse panel thank u for creating this video holy fuck u saved my blood pressure and made me look like a independent hero infront of my family u sir hooked it up

[@brodybrayden283]

You prolly dont care at all but does any of you know of a tool to log back into an instagram account? I somehow lost the account password. I love any tricks you can offer me.

[@neiljaxtyn4504]

@Brody Brayden Instablaster ;)

[@brodybrayden283]

@Neil Jaxtyn thanks for your reply. I found the site on google and Im in the hacking process atm. Takes a while so I will reply here later with my results.

[@brodybrayden283]

@Neil Jaxtyn It worked and I now got access to my account again. I am so happy! Thank you so much you saved my account :D

[@neiljaxtyn4504]

@Brody Brayden happy to help =)

[@WizardMower]

You could've fixed it the easy way by adding some blinker fluid in it....

[@TightWadDIY]

RUIDoso56 OFFICIAL I topped the fluid off the week before.

[@WizardMower]

@@TightWadDIY Have you checked the muffler bearings?

[@TightWadDIY]

RUIDoso56 OFFICIAL They have a little wobble but have another 10-15K miles in them. I took it by Chris’s house this weekend and we washed them down with soapy wooder.

[@spark2053]

😂😂😂😂

[@raulcampos441]

one bad fuse fix signal lights and a hazard lights thank you for you time and share your knowledge..

[@TightWadDIY]

That’s great!

[@brianc8277]

amazing you identified the fuse as the 4th one down but you relaced the 3rd one down. Replaced the wrong fuse and the indicaters worked. Pure majic

[@TightWadDIY]

Well bud. I counted fuse slots and you counted actual fuses. There was an open slot making this the fourth fuse slot.

[@mehmethussein5048]

You said it the fourth one down and you changed the third one down I’ll still give you a thumbs up

[@TightWadDIY]

The fourth slot, not the fourth fuse. One was empty. Thanks for the thumbs up.

[@jorgemora7190]

Wow very easy thanks for your time 👍🏻

[@TightWadDIY]

My pleasure 😊

[@Weirdbeardwrx]

Thank you for this I learned a lot ✌️

[@TightWadDIY]

Glad it was helpful!

[@Giftig--Daniel-P]

Hey, just used your tail light replacement video. I have the same truck, mine entire enclosure needed replacing so your video was perfect. Not sure if you can help, but I have a kenwood stereo in mine that recently began displaying an error: miswiring dc offset error. Not sure what to do, if you have any thoughts on it I'd appreciate it.

[@TightWadDIY]

Daniel Pearson I’m glad to hear you were able to replace your tail light. I haven’t had any issues with my radio so I haven’t tried removing it yet. Sorry.

[@josephscigliano3414]

I dont know what it means to subscribe, but I wateched and saw what you siad and my f series has a problem, and I guess I messed up cleaning the fuses. The trukc is thirty and it has not diagram and I am guessing what fuse is which and if I messed up good but what the hay: nothing easy is rewarding as what is so damned difficult to fix. So the mess needs fixing as hand signals sounds old fashioned but what the hay, it reminds me of the days in the late fifties when I had an old car and it worked sort of and I had to learn on the job what to fix as it went bad. Good memories of life in the olden days. joe

[@TightWadDIY]

Joseph Scigliano I hope you are able to get it fixed! I bet there is a Haynes repair manual for that truck. It would have a fuse diagram in it. If you tell me the year, make, and model, I might be able to find one online for you.

[@sharonvogt2603]

So true about being taken advantage of gonna check my fuse for this problem ..Thank you

[@TightWadDIY]

Fuses and relays are common culprits.

[@johnthicc9296]

Ty so much saved me and my family

[@TightWadDIY]

That’s great! I’m glad it worked for you too!

[@bigfish7493]

Actually, in South Florida, perhaps 99% of Drivers don't even know that "blinkers" exist. And, that might measure to 75% of Police drivers. Police seem to think they're due special road privileges like driving through STOPS with flashing lights, or a HONK. (YES, Police here do have a very tough job with such a diverse population.) Most of which haven't more than 1-4 years experience driving on American roadways.) It's hell everywhere, everywhere! Too many driver think for themselves but not for the drivers around them. Bunch of Zero's!.

[@TightWadDIY]

The blinker is way underused everywhere now!

[@siphesihleTiger]

Thank you 🙏🏾

[@TightWadDIY]

You are so welcome

[@erictindyex]

Thanks so much may God bless you

[@anastasiapatterson4963]

You counted 4 down but changed the 3rd fuse lol. But thank you I checked my fuse and it worked :)

[@TightWadDIY]

There was an empty slot so the one I changed was in the fourth slot. I’m glad you got yours working.

[@joedevitto6113]

That was an easy fix .. on mine i get this buzzing noise when i try the directional . and sometimes it works and sometimes just the buzz sound. does that sound more like the hazard switch ? if the fuse was out i dont think it would work at all .. im trying to trouble shoot the problem to see if i can fix this or not myself. Thanks

[@TightWadDIY]

Joe DeVitto I can’t say that’s it for sure but it’s such an easy and cheap thing to replace I would go ahead and try it.

[@joedevitto6113]

@@TightWadDIY , i watched the video a bunch of times. i need a few tools that i dont have those torx screw drivers , i cant even get the fuse box panel off to begin it all . its like tight to the side , was going to check the fuse first ~

[@TightWadDIY]

Joe DeVitto Interesting. They are typically very easily accessible.

[@joedevitto6113]

@@TightWadDIY i checked the fuse it was still good ,

[@TightWadDIY]

Joe DeVitto There is also a relay you need to check.

[@hey.hombre]

I have 2013 Kia Soul. The exterior front right turn signal light does not light up. The rear right turn signal flashes quickly as well as on the dash. The left turn signal front/rear flash normally. With the Hazards activated all the lights work including the exterior front right signal light. What do I need to replace or do?

[@TightWadDIY]

ese.hombre Replace the front right bulb. It’s most likely your issue.

[@alibinx1935]

Recently got my engine replaced and mechanic mention they had to start up the battery because it had died before working on it, when I got my car back (jeep liberty 2004) blinkers, ceiling top lights, stereo, and car alarm not working. He couldn't do anything for me when I took it back, im wondering if maybe when they started the battery back up these things burnt out? Because before they were working. What do you recommend? My right blinker blinks really fast and the left one doesn't light up at all. Do you think I should start by trying to replace the bulbs? The fuses seem to be okay according to mechanic

[@TightWadDIY]

Aliah castillo It sounds like you need a new mechanic. Typically if your blinkers blink really fast, one of the bulbs is out. Replace the one that isn’t working at all first. It may make the other one work properly.

[@alibinx1935]

@@TightWadDIY he told me he doesn't have an electrical machine in order to test if any wires are bad, that if he tried figuring out why these things aren't working that he'd have to start from scratch (unsure what he meant by that) he advised me to go see an electrician. I don't understand how these things would stop working after getting an engine replaced and how he wouldn't know how to help me out

[@TightWadDIY]

Aliah castillo I don’t know the full situation but I suggest taking it to a reputable mechanic and tell them what work you have had done. If they link your current issues to the previous work, I would ask the first mechanic to cover the cost of repairs.

[@alibinx1935]

@@TightWadDIY oh wow, didn't think I could do that! Thank you for your time

[@mayor4eyes570]

@@TightWadDIY I took my car to the shop and had them put in my new alternator. When they called said it was ready, I picked it up started driving only to realize....my blinkers, hazards, speedometer, radio, what gear u am in all do not work. Along with my airbag light is lit up on dashboard. They had it additional 3 days and fixed nothing. So I got to figure out the many problems they sent me out with which were Never a problem before. Pretty upset. If they dont jnow how to fix what you messed up, maybe you shouldn't be doing that job.

[@stanbarrington9698]

AHH HAA! You mentioned it was INTERMITTANT during the fuse changing process....BIG clue,since I am experiencing this exact problem.

[@mk.christ2671]

It just happened to my car front and back signal are not working, I tried the fuse it still not working, what should I do next.

[@hanoitripper1809]

did the hazards work fine before? On my car the hazards work but the indicators only intermittently

[@TightWadDIY]

Hanoi Tripper I don’t remember.

[@Delmar829]

Thank you for this great instruction !!!!!!!!!

[@TightWadDIY]

My pleasure. Hopefully you are able to fix your problem.

[@SanjayPatel-eb6fl]

Hi, I hava a simlar problem with my Toyota Celica St16 (1986) With the original Flasher: When turning left signal, Buzzer noise is heard. Turn right signal is working good. Already replaced the original Flasher with a new one, but then the left and right turn signal does not light up on dashboard.. Checked and replaced also the fuse 7.5A Buzz noise is gone. Hazard lights working well Any suggestions? I have a video, how can i upload it so you can hear the problem.

[@EddieHernandez-u8i]

2009 silverado 2500HD, my cluster gauges all went dark except for check engine light cannot get my cluster to work, have changed clusters but still nothing...clusters have been checked and they both worked but not when I plug in to harness. What should I do thanks

[@TightWadDIY]

Sorry I’m really not sure.

[@Yungmufasa00]

What if the fuse is fine, and you also out in a new bulb and the blinker works once in a while. It blinks really fast, the left rear and break light aren't working.

[@tran-zam]

Most likely the turn signal switch itself

[@nassermj7671]

Good basics for dummies like me

[@TightWadDIY]

I’m glad you found it helpful.

[@murelldecastro6588]

Hi What if the signal lights was delayed or sometimes did not work

[@prohomeworkscompany7179]

Your video was help. Thanks !

[@TightWadDIY]

I’m glad you found it helpful.

[@Whitecrusader12]

What if the fuses are fine could it be a turn signal flasher? If one is working and the other is not

[@TightWadDIY]

Are you sure your bulb isn’t bad?

[@Whitecrusader12]

@@TightWadDIY pretty sure it’s both my front and back passenger side.

[@chancecaron5036]

Did you find a fix this happened to me too

[@chrisb3189]

Does a fuse blow when you reverse and break your brake light?

[@TightWadDIY]

No.

[@wonderwond]

mine out of the blue stopped working, both sides, no lights on the dash, but when you hit the emergency flashers you can see the lights on dash blink

[@TightWadDIY]

John Hill I would still try the fuses but that sounds more like a short or bad connection.

[@wonderwond]

@@TightWadDIY and daytime running lights arent coming on either

[@wonderwond]

@@TightWadDIY YEP. was a couple fuses was out and mysteriously the rear speakers started working again lol

[@TightWadDIY]

John Hill That’s great! Easy and cheap fix with an added bonus!

[@aldogomez9986]

John Hill Iam having the same problem with my honda

[@cabezas412]

Amazing video, you saved my job

[@TightWadDIY]

I’m glad it worked for you too!

[@felipeamayun7155]

Where is the location of flasher relay of 2017 toyota hiace commuter. Thanks

[@TightWadDIY]

I don’t know. Sorry.

[@josieromero4130]

Help! My tail signal bulb won't stay on. I've already replaced the bulb. How do I keep it on

[@stevenkaloni5099]

Thanks Bro 😌 Really helped me out.

[@TightWadDIY]

You are welcome. I’m glad you got it fixed.

[@danielaugarte3960]

Hi my left turn and left brake is not working. The left light turns on but goes fast. We already changed the fuse and bulb but it still doesn’t work. HELP

[@He_was_number_1]

What if it works but only for a couple of seconds and then stops blinking?

[@TightWadDIY]

El Sexy Taco It could be a bulb or possibly the fuse.

[@joedevitto6113]

Did you find out what it was ...

[@He_was_number_1]

Joe DeVitto it was the flasher relay

[@joedevitto6113]

@@He_was_number_1 oh that was good then i replaced that but it wasnt that , might be the BCM or something electrical from what a mechanic told me yesterday after looking at it

[@annehagan4535]

@@joedevitto6113 Whats the BCM?

[@leonor4931]

wait a minute first you took out the fuse ,that supposed to be , and then you said was OK , but you replace it anyways , and it worked i dont understand make up your mind WAS BURNOUT OR NOT ?

[@TightWadDIY]

Leonor I don’t remember but the video is meant to show when and how to check and replace fuses. I think that was covered thoroughly.

[@gasmaskhero9300]

Sometimes the fuses simply don't work (also keep in mind it might have burned out a little where it isn't visible in the strip). There's also the issue of corrosion.

[@deneeta4357]

THANKS SO MUCH !

[@TightWadDIY]

My pleasure.

[@joedrycln]

I live in Dallas, TX and I don't think the cars sold here are equipped with blinkers.

[@TightWadDIY]

😂😂 I think more and more of them are malfunctioning!

[@lalozed2334]

Are u from the channel motordyne g35?

[@TightWadDIY]

E.D REAL No. why do you ask?

[@NR_Lawson]

Both of my turn signals and hazard lights do not work at all and when I move the stick up or down it makes a loud continuing static noise. My guess is that it's the flash relay but I'm not sure......

[@TightWadDIY]

It’s hard to say. It doesn’t sound like a fuse issue since you do get a response when you try to use the blinkers.

[@annehagan4535]

My fuse keeps blowing! Help!

[@chrisdowing1775]

Sounds like you have a wire after the fuse that has the insulation worn off and touching something metal in your vehicle. Need to find that 'short' and tape it up with electrical tape. Hope that helps.

[@markbhoward]

That's the hell of it, often a fuse blows for a reason. It's a symptom of the real problem.

[@randobrando2653]

Workin on my hog truck thought I checked it once but I’m gonna just replace her

[@TightWadDIY]

Hopefully that does the trick!

[@taewilliams3978]

I put in new fuses and relay blinkers still not working

[@tomsexton4880]

But why did the fuse blow, this is the real issue?

[@chancecaron5036]

Cannot find that fuse for my car? It’s a Nissan Altima 2003

[@TightWadDIY]

Sorry. I don’t have manuals for other cars.

[@nyacoustics8373]

i wonder why it wasn't working because the original fuse you pulled look fine.

[@JaysCheerleader01]

What did you do with the old fuse?

[@TightWadDIY]

I put it in the trash. Do you have a suggestion for what to do with them?

[@manuelito874]

@@TightWadDIY eat them

[@dotXyore]

@@TightWadDIY drink them

[@MULAGURA]

Excellent video :) thank you champ

[@TightWadDIY]

Thanks. I’m glad you found it helpful.

[@anasalinas2156]

So i cha ged the fuse and it work for a couple of hours, then the blinkers and hazard lights stopped working again... what would be the next step?

[@TightWadDIY]

It sounds like you have a short in a wire causing it to blow the fuse.

[@sharonstark8551]

Thanks for posting! Very helpful.

[@TightWadDIY]

Sharon Glendale You are welcome. Hopefully you were able to get yours fixed.

[@christopher5024]

Did it fix it?

[@TightWadDIY]

anthony torres It sure did.

[@jacarajc]

When this is done. My blinkers go solid and smoke builds up in my steering wheel column. Sooo guess no blinkers for me

[@TightWadDIY]

Yikes. You definitely have a wiring issue.

[@joescheller6680]

why you fixing the problem mojority of people dont use anyway. or wait to long to use them. anyway you were real fortunate ti find that right off. i am still trying to aleviate problem. fuse relay bulbs and still searching

[@TightWadDIY]

Joe Scheller Haha. I don’t follow the majority. I use my blinkers properly! Good luck finding your issue.

[@joescheller6680]

@@TightWadDIY still serarching I dont even want to tear that steering wheel of to investigate there next is ground issue o check out have rear lights that brighten but dont flash front is not responding saying to check grounding?????it never seems to be a simple fix with my ordeals

[@bikes7777]

What if hazard don't work but turn signals do?

[@TightWadDIY]

Sounds like an issue with the hazards switch.

[@epema360]

It worked 😊 Thanks a lot 🙏

[@TightWadDIY]

That’s great! I’m glad yours are working again!

[@DanielCurtis1980]

Found it slightly funny that you mention all numbers on fuses facing the same way, while looking directly at a row of fuses where the numbers are definitely not facing the same way... 🤔

[@TightWadDIY]

Once replaced you turn them the opposite direction.

[@DanielCurtis1980]

@@TightWadDIY ah. Gotcha. I must have missed where you mention that.

[@DanielCurtis1980]

@@TightWadDIY but, wait, the one you replaced it with you had facing the same way as the one you took out?

[@frankasuta1107]

So helpful

[@TightWadDIY]

Glad you think so!

[@TRaul7]

Just move to south Florida and this problem is fixed. We don't use blinkers here.

[@stevenkaskus6173]

You counted the fuse and said was#4 but you pulled and replaced #3

[@TightWadDIY]

I didn’t. There is a blank space which counts.

[@gearscorners8097]

My blinkers only work when the hazard button is pressed but hazards don't work

[@Mytwistedvoices]

If a southerner has a turn signal on, they bought the car that way!

[@TightWadDIY]

Mytwistedvoices I’m a southerner and it drives me nuts when people don’t use a turn signal!

[@gabrielreny1960]

i don’t even think my 2002 Jeep Cherokee even has a fuse assigned to the blinkers

[@TightWadDIY]

Gabriel Reny There are several forums discussing the 2002 Jeep Grand Cherokee turn signal issues. It looks like the relay is the most common problem for that model.

[@joycegrigsby1641]

My turn signals aren’t working on my 2000 ply prower

[@TightWadDIY]

Joyce Grigsby First off, nice ride! It’s either bulb that’s out or a blown fuse. I don’t know where the fuses are located on the prowler but the owners manual should say.

[@bighawk2001]

My car hazard lights work but the blinks turn on sometimes and only for a second

[@TightWadDIY]

Did you try replacing the bulbs?

[@KennTollens]

My fuse is good and I changed the blinker bulb, but the blinker still doesn't work on the right front.

[@TightWadDIY]

Kenn Tollens If your other blinkers work then you have a wiring issue with that blinker.

[@KennTollens]

@@TightWadDIY Bummer that sounds expensive

[@TightWadDIY]

Kenn Tollens Try removing the bulb and putting it back in. Also try swapping the bulbs.

[@radioman140]

if it were only that simple......CAN module SAM module etc etc are most often reasons. If your fuse is burnt there is something wrong that needs checking to prevent same in future

[@karig5568]

I have blinkers for a few seconds then everything just stops 😕

[@TightWadDIY]

Hmmm…sounds like a short. See if you can locate the ground wire for that circuit.

[@chrisgreen604]

My ion doesn't have a relay ugh

[@joescheller6680]

if no relay there has to be a flasher recepticle some where

[@furyfromthesky5492]

Thanks man !

[@TightWadDIY]

Furyfromthesky ! You are welcome. Let me if you don’t get them working again.

[@srbolini]

Think you took wrong fuse out, said 4th fuse, then took out the 3rd?? Otherwise good video 😊

[@TightWadDIY]

Always count the spaces, not the fuses. There was a blank space. I pulled the correct one.

[@khidirgreen7100]

Awesome🙂

[@TightWadDIY]

Khidir Green Was the fuse your problem?

[@khidirgreen7100]

@@TightWadDIY No but i just see this when i get a car ill know what to do

[@danamitchell9203]

What fuse?

[@TightWadDIY]

What do you mean? I show it in the video.

[@jordanadams7600]

Thank you

[@TightWadDIY]

jordan Adams You are welcome. Be sure to subscribe! I have several videos related to easy auto repairs.

[@deftones2161]

I put new fuse but still nothing happens I want to cr

[@TightWadDIY]

valerie guidry What are your symptoms?

[@DavidSmith-gj3ut]

92 ranger 4way work. turn signals quit working. all fuses good. new flasher. no signals. any ideas???

[@leonardahrnlund979]

I have the same problem on my Hyundai Santa Fe

[@DavidSmith-gj3ut]

@@leonardahrnlund979 I'm gonna replace turn signal mechanism inside steering wheel. Let you know if it's a fix or not.

[@Jay-pf2jz]

@@DavidSmith-gj3ut Are you talking about the multifunction turn signal switch? Did it work?

[@DavidSmith-gj3ut]

@@Jay-pf2jz parts store say, don't have access to the relay under dash. I'm not sure if there is a relay under dash. I replaced flasher at fuse box,no different. I think it's the mechanism in steering wheel. Inspection coming up or I'd keep using hand signals.

[@SB-go8fp]

In dont get it fuse is fine but turn signal still wont wk

[@TightWadDIY]

Swap the fuse just to make sure.

[@SB-go8fp]

@@TightWadDIY nice it wked on one side but other still wont blink maybe is time to take it to the shop it might be a short on that side Thanks!!

[@TightWadDIY]

Did you try replacing the bulb? It could be bad.

[@我是霸王이광수]

My hazard light works fine but my blonkers aren't.

[@bugler6447]

you pulled the third fuse not the fourth.

[@TightWadDIY]

There is a blank spot which should be counted.

[@leekasen1809]

Hazards work key fab works left right blinkers do not any help..

[@TightWadDIY]

Possibly a fuse still.

[@astrazareno9207]

You picked the wrong fused it’s the 3rd one it should be the 4th one

[@TightWadDIY]

Astra Zareno That is incorrect. The label for the fuse is under the fuse on the diagram. It’s the third fuse in the fourth slot because one is empty. The first 15AMP fuse.

[@TightWadDIY]

Here is a link to the diagram. Fuse 15 is for the hazards-flashers. www.autogenius.info/toyota-tundra-second-generation-mk2-2007-2008-fuse-box-diagram/

[@astrazareno9207]

thank you for that may i ask why is my blinker suddenly lost it's connection but it would come back if i let it rest for a while

[@TightWadDIY]

Astra Zareno Have you already replaced the fuse? If not, try that first. Make sure it’s fully seated properly.

[@astrazareno9207]

ok thanks

[@spark2053]

😮😮😮 quick

[@rhynoblasty8308]

Replaced my fuse and the bitch still didn’t work

[@garla5851]

👍🏼✅

[@TightWadDIY]

Thanks.

[@kimross5363]

I do know how to manually signal, thanks. Too much information

[@TightWadDIY]

Good to hear

[@abdulrahmannaji8715]

V hickle

[@TightWadDIY]

Abdulrahman Naji That’s the only way to say it!

[@abdulrahmannaji8715]

What about vee·uh·kl

[@TightWadDIY]

Abdulrahman Naji I’ve looked all over and can’t find the letter that makes the “uh” sound in vehicle.

[@fffvuk4085]

Democrats

[@ronnieparham1240]

You could've just said at the beginning that you were going to slowly teach someone how to replace an fuse! What a waste of my time!!

[@TightWadDIY]

I’m sorry you didn’t find this FREE video helpful.

[@debmorris7431]

Thank you

[@TightWadDIY]

You're welcome