Easy Install for Side Step Lights

[@605LIFE]

Those LEDs are rad!!

[@tailai168]

Hi : I Bought a running boat For My 2019 Toyota Rav4 blue wire I connect to Door light (domes Light ) White wire I connect to fuel Box running signal Red wire I connect to Turn signal Black wire I connect to Ground But only work for turns single When I opened the door They don't have light come out Can you tell me what's wrong Thanks

[@ordinary_arkansan]

Hey, I'm sorry, I can't really help with this. I'm not familiar with the Toyotas.

[@tieuhoc321]

I have 2024 gmc sierra 1500 densli. Try hook up step light. I don’t know with wires to hook up? Did you know with bcm or elm? Please help

[@ordinary_arkansan]

Sorry. I'm sure the 2024 is different. I'm not sure what it would be on those. I'm sure you can find a diagram online.

[@franciscotorres8667]

Hi quick question. So the positive cable goes to the gray cable and negative to battery negative?? Thank you

[@ordinary_arkansan]

Correct.

[@franciscotorres8667]

Thanks you!!!! ​@@ordinary_arkansan

[@shondunn]

Hey I need some help I have a 2022 Gmc 1500 Denali. Brought some Led lights to add to my running board. I tied them into the door sill lights. Every time the lights come on they flicker and then come on. When they go off the flicker then off. What can I do to get full power to the running board lights. I know the dome lights has a dimmer on them. Thanks

[@ordinary_arkansan]

Did you go through the BCM like I did? Mine will sometimes flicker if my truck is off, but other than that they never flicker. What kind of LED lights are they? You may need to get some that don't require as much power, maybe?

[@andrewhassell8982]

instructions unclear, I now have jelly all over my ceiling fan . . . .

[@ordinary_arkansan]

😆 get to work!

[@Joshua3131cc]

Do the lights come on when you hit the lock and/or the unlock button on the key?

[@ordinary_arkansan]

They come on with the unlock and fade off with lock.

[@raymtz4016]

How did you know what BCM and pin connector to go with? Do you have a diagram?

[@ordinary_arkansan]

There's a few links to diagrams in the comments.

[@raymtz4016]

@@ordinary_arkansan Gotcha, yeah I found them in a previous video, not in this current one. Thanks

[@brianperry3215]

Do you know if the articulating running boards are connected to the BCM by chance?

[@ludgerobarbosa8781]

Where did you get led strips

[@ordinary_arkansan]

@@ludgerobarbosa8781 from Magnum steps

[@ludgerobarbosa8781]

@@ordinary_arkansan you have the link to it please thanks

[@markmanning5683]

Why would you leave wiring on the underneath of the truck? Maybe run the wires from inside the passenger compartment thru the grommets for each step area. Run all you wiring along in Wire channel inside the truck. Nothing to see that way.

[@ordinary_arkansan]

The way these lights are setup, there's no way there's enough wire to do that. Besides, if you get underneath my truck no wires are exposed or seen. I've ran them high and tight and inside conduit.

[@alberthornsby8486]

What lights are these?

[@ordinary_arkansan]

Theyre just cheap rock lights from O'Reilly's..

[@alberthornsby8486]

@@ordinary_arkansan thx bro

[@jerryruiz26]

Was this filmed with a potato?

[@ordinary_arkansan]

Get off my channel!! 😆

[@605LIFE]

Haha!!

[@mh-uk4vq]

Too much moving you need to hold the camera steady Dude.

[@ordinary_arkansan]

@@mh-uk4vq just move your head with it. 😆

[@lighthouserevivalcenterupc9887]

@@ordinary_arkansan Uncalled for comment, besides not everyone has a head that is loose 😮