EBC Brake Pads install

[@shay.m7351]

Perfect, big help - also please feel free to post every possible maintenance that exists on the Z900 cause I will watch every one

[@SimpleSimon]

Thanks for watching don't forget to subscribe

[@kzijen]

Have the same pads on my Z900 too..on front and rears...paired with ebc bf307+ brake fluid (but stock hoses)...that combo is absolutely amazing

[@SimpleSimon]

Thanks for watching, Don't forget to Subscribe

[@wakaoeh]

does a good brake fluid make a difference to the braking power?

[@kzijen]

@@wakaoeh no...but it helps to maintain braking power under heavy use like in the tracks

[@jhantushankar]

Plz Make a video on full brake caliper cleaning

[@SimpleSimon]

I will definitely do one, but till then Dave Moss has a pretty good one on his KZbin channel. Thanks for watching Mayank and for being a subscriber.

[@Gtknoob]

Very informative 👌🏻

[@SimpleSimon]

Thanks for watching

[@christianalvarez1188]

Thank you!!

[@SimpleSimon]

Thanks for watching

[@8OneOfTheNobodies8]

If you want to clean the pistons you have to press Them out a little wirh the break.. Then push Them back in when they are clean 👍🏻

[@SimpleSimon]

Usually I hit them with break clean before I push them back in. Just be careful when applying brakes to extend the pistons, its best not to pop them out of the caliper lol. Thanks for the comment and watching.

[@lamotojz]

Hi, I have a question you don't have to bleed the brake fluid after installing the pads?

[@SimpleSimon]

No you only have to bleed the system if you open a bleeder or have a soft lever. I recommend flushing the fluid when changing the pads. Thanks for watching!!

[@lamotojz]

@SimpleSimon thanks. I replaced the pads EBC brake pads front and rear I can feel the difference. Not sure it's just because new or better brake pads but definitely more early bite than stock ones.

[@HonderdtachtigCC]

dont you have to put chopper grease ?

[@SimpleSimon]

You can use Copper grease a great product.

[@dg8062]

Replace the half-assed stock '18 mt10 pads with these. What a night and day difference! Makes me not want to have to "improve" these brakes. Changing to good sintered pads will do WAY more on a mt than spending all the $$$ to do ss braided lines, rotors, etc.

[@kz900r4]

More bite than stock pads?

[@SimpleSimon]

Yes after the heat up a little.

[@ruinunes3233]

Where did you get that radial master cylinder?

[@SimpleSimon]

I have a setup and install video if I can find time to put it together makes a world of difference. Thanks for watching.

[@kz900r4]

Sweeet thanks

[@SimpleSimon]

Thanks Andrew g don't forget to subscribe.

[@jhantushankar]

which levers do you have?

[@SimpleSimon]

They were some amazon cheapys I will try and find a link for them. Thanks for watching.

[@jhantushankar]

@@SimpleSimon Thanks man, appreciate it