How to Install a Carbon Fiber Spoiler

[@Methereaper]

Shout out to the neighbors fighting in the background

[@poop_guy]

Time stamp?

[@KevinMartinez-kb5uq]

@@poop_guy 8:55😂 listen closely

[@christianmagallon7040]

So what’s the half of 22? Lol

[@enzodh5419]

Meth reaper

[@GHannel]

Are you sure? YES / You’re positive? YES / You’re pregnant? NO / Okay... 😂😂😂

[@Impiano]

That’s part 😂😂

[@jasonworthen2871]

Killed me 😂

[@slayerofgoats0228]

Oath

[@trusaint8748]

lmaooo for realll caught me off guard

[@Saurixy]

LMFAOOO

[@ShaunSportTeach]

Was about to fit the exact same spoiler, all measured up but started to rain so came indoors to wait it out,.. found this video and boom! I've now ordered a pack of 100mm M6 bolts. Thanks for the info, you saved me a trip to the hardware store and all the inconvenience of finding out the hard way. Many thanks

[@bricklayerlzdp9825]

Measure the width of the trunk. Find the middle and mark it. Measure the distance between the two mounts. Cut that amount in half and the measure that half from the center of the trunk. Mark it left of center and right of center. You now know how to install it evenly.

[@rscustoms8264]

Appreciate it, didn't understand fully🙏

[@flgssekmg]

Good idea, thanks

[@TimSter15]

Can't do maths. Basic requirement of DIY.

[@Torquenstine]

Your bolt were long enough cause your suppose to drill a bigger hole on the inside so you do end up crushing the supports

[@hmm_opto5618]

Damn, great idea man that looks great!

[@Rrocksstar]

Nice video. Did your internal trunk support frame bended from inside because of those longer bolts that you used to fix the spoiler? Also is it the correct way to install it on the trunk support frame from inside or does the holes on that support frame has to made wide and tighten the bolts all the way to the top metal later of the trunk? And does the spoiler makes your trunk warp or bend after a few months or years?

[@ptproductions3582]

14:20 to not be bored to death

[@James-ti3vl]

Any trunk bending/deformation issues now that you've had the wing on for awhile? I didn't see any reinforcements on the bottom side i.e. fender washers or sheet metal bracing, etc. Thanks!!

[@chrisespinal6606]

This video really helped and I might do it to my GT-R. BTW your lancer looks AMAZING

[@EFFEKTRecords]

thx bro!

[@hjibuloibgiol987]

GOLDBayside14 You have a GT-R? What model year is it?

[@chrisespinal6606]

hjibuloibgiol987 2017 premium

[@hjibuloibgiol987]

GOLDBayside14 Lol whatever you say. Wink Wink. You "certainly" do own a GT-R 😂😂

[@hjibuloibgiol987]

PANCAKE I know lol, sarcasm. Kids are kids though, dumb. Most of the time.

[@Axxetto]

I'm soon going to do this on my gtr just because it looks cool I know I'm a ricer idk I just like the look

[@NathansLife]

same for my fwd hatch but ya know what its time we stop caring about what other lads think and do what makes us happy eh?

[@ContentByNapz]

Sinfulnes fuck what people think, it’s your car bro

[@biohazardlnfS]

It's your car. Do what you will with it. Anyone else can fuck off

[@samnelson5104]

That is to much wing for that type of car.

[@jvsky1140]

YeAhbOi ahE garh

[@itsTotalAmbiance]

I have mine but I’m to scared to install it 😢 should I just go to a shop

[@MeditateWithNature365]

Is there any way to prevent people from unscrewing and stealing the spoiler wing? I don’t want that to happen if im in a bad neighborhood

[@ryangretlein656]

Generally it’s best not to so that you can still remove it yourself later. But if you’re ok with that risk, you could always sand and wield metal parts together, solder in the guides on the screwheads, or use headless screws.

[@MeditateWithNature365]

Thank you! Makes sense!

[@KiroVencenzo]

That’s what worries me as well

[@rozikhan2744]

Universal and adjustable and mult-piece spoilers will have that problem, most spoilers made specifically for your car will only require bolts from inside the trunk.

[@danii8168]

I’d rather get my spoiler stolen rather than the catalytic converter if I’m in a bad neighborhood otherwise…

[@anthonymalfino1]

I'll comment at 53 seconds in. I have a 2017, and my wing comes tomorrow. Same one.maybe I send a pic. I'm sure the rest of the vid is awesome!!!

[@anthonymalfino1]

I will say that I did buy the very same wing as well. I appreciate the knowledge you've offered. Thank you

[@tallerthanyo]

Relationship Goals!

[@dpcnreactions7062]

He did a great job installing it and he could a socket set for those tight spots! However, A spoiler on that style car just looks wrong! Maybe if the car was black or maybe it is because I am not a spoiler person!

[@boyusun8720]

Is this wing have vibration during high speed or bad road conditions? I have a taller wing, and it have noticeable vibration.

[@554drago]

Boyu Sun tighten it and the problem should fix

[@jeylaw3893]

I installed the same spoiler on my car and after I hit 50-60 mph starts shaking like a Mofo. ... Does yours too?

[@hiddenkard3101]

JEY Law adjust the level of attack. Or its not adjustable? Maybe you just bought a cheap ebay spoiler that doesn't do anything but create drag.

[@LightspeedGaming]

Cheers for this dude, it's pretty much the same spoiler fitting I've got and I need to drill it in really helpful!

[@fusion4life585]

Where did you get your rear spoiler wing fom?

[@FanoxHD]

great video bro :)

[@bluemanscoops9980]

When he said are you pregnant and she said no I was dead

[@nonosnow5570]

Quick tip for Alan keys if you use the other end of the Allen key you can tighten bolts faster but I understand you have less leverage but more motion

[@Izoguri]

2019.03.29. That clip helps me :)

[@pocketrocket45]

kudos to the helpful girlfriend lol. Looks good

[@JohnDoe-ot8le]

Your wife is awesome, congrats

[@mrrace7971]

Im going to do this with my audi☺️

[@TheCdM1981]

Wow........just wow.....

[@claudespeed80]

The Lancer reminds me of the Armored Kuruma in gta online

[@kaydec55]

The Kuruma is based mostly on the Lancer/Evo. Along with inspiration from say a Wrx or SRI loosely

[@ameerdaniel7041]

plz tell me the guy knew what half of 22 was

[@xtheroosterx6141]

11

[@Axxetto]

12

[@issackaiser]

13

[@ambuyat69]

14

[@ItsBoogeyman]

17

[@abc.garage]

Wing looks really good

[@enriqueduran19]

So new trunk if I already have a stock spoiler and trying to add this one?

[@confessionsofthedoodle]

Nice wing, but when I saw the car I got disappointed. I thought you'd have a EVO or at least RA, but that looks like the base cheap version that you drive to the grocery store for. That car does not worth that wing.

[@EFFEKTRecords]

Kevin Chen I do have a EVO tho

[@EFFEKTRecords]

just nt at that time ha

[@avilgeorgescu5535]

good job

[@innovativeentertainment4412]

Why aren't you using loctite? The wing could fly apart. At least if you had loctite, you secure it a lot better.

[@aaronaaron6348]

I'm about to put a spoiler on my 98 Corolla black thanks for the heads up

[@Turbo_The_Femboy_Fox]

I’m putting a massive AR Performance wing on my Accord!

[@Turbo_The_Femboy_Fox]

I meant APR, I didn’t notice the typi

[@LordFrostyOnPc]

Is it actually a good quality wing? like im not gonna use those mounts im going to build custom chassis mounted ones but did the wing actually end up holding up? and was it actually real carbon?

[@griddfromthe713]

I just thought I'd put some super glue on the bottom and I'll be ready to go 🤷🏻‍♂️ but I didn't expect a 15 minute video 💀

[@dwaynelobo6725]

When it rains does it cause leakage from the drill side ??

[@Michael_knight1981]

Good job that was tight work

[@greg0716]

How did u keep it from leaking around the drill holes?

[@EFFEKTRecords]

It has a gasket on the spoiler

[@dexterandal9152]

I just saw this, but where did you order that spoiler?

[@aikidokamks]

I wonder if that would look good on my Kia optima 🤔

[@janicesanderson3310]

Real question . I really reall need to know if it held up from the nuts going on the 2nd layer of steel metal . I have a spoiler for my wrx n it’s similar and I have layers as well but most ppl Iv seen put bolts directly on the other side of the trunk . Wouldn’t that wear down after a while . No thread lock and it could just weaken . I duno . My first time. Lemme know how it’s been after how much time if it got loose . Details pls dude . Cheers

[@bricklayerlzdp9825]

Rubber gasket and tighten it hard. Shouldn't wear or loosen

[@prototypeAleks]

Might be a dumb question but when it rains, dose the water get inside / do you get rust because of the spoiler?

[@ELJ666]

Unless you race a wing will waste your fuel economy instead get a duckbill or ducktale style

[@iancowiejr1195]

Can you send the link to this product, I kept clicking on it and nothing comes up but that is niceee

[@ELJ666]

Okay nothing wrong with rice it's fun it looks cool besides race cars are cool

[@Rx330lexuslover]

Looks nice!! People that say rice car, fuck them. If you like it show it off!!

[@derekmarshall4600]

i just ordered a active aero wing from victorracing and i really needed some heads up

[@zycninjaz4657]

it wobble? mine will start wobble when reach 80mph and above

[@elliotcohen438]

beautiful!

[@aarontian968]

Hi man! How’s the quality of the spoiler so far?

[@NateBrahh]

wouldn't the spoiler hit the top when you open the trunk? new to car things

[@arvintology]

Does it wobble?

[@MrM4NG4]

so are you having any leaks when it rains? also arent you crushing the support?

[@narelehlohonolopapo9299]

Think applying some cilicon should be mandatory.

[@slumpyt336]

Got the same exact one, helped a lot

[@jadencofield4433]

Really need your help if you can I have the same spoiler but none of it is making sense to me if you could please answer back to this it would be greatly appreciated!

[@christianevans5747]

Make sure you guys realize it’s a 2008 Mitsubishi Lancer cause if u don’t realize he has a 2008 Mitsubishi Lancer , your gonna not realize he has a 2008 Mitsubishi Lancer- the entire video

[@EFFEKTRecords]

Ya, just in case you missed it! I Needed to double check, then re checked what I just double checked to be sure that my audience knew that I re checked what I double checked...

[@brown6796]

It looks slick on your lancer bro! I do have a question regarding the spoiler. So i will be putting it on my 11 IS350 FSPORTS, but is it gonna damage the trunk or something like that? Cause some people said that after a while it starts to bend the trunk. I dont wanna mess up with the car while its in good shape. I mean i really want to get this spoiler but at the same time it makes me little bit worry about the quality and after effect. Any advice or suggestion would be really appreciated! Thanks.

[@AGENTWOLF]

It bends then trunk but all u gotta do it hit it with u hand and good as new the bend like when u sit on ur hood and leave a dent just hit it

[@scottkievning9297]

THAT'S A REAL NICE SPOILER..CAN IT BE INSTALLED ON A ,,92 CAMARO RS CONVERTIBLE,, LIKE THE SIZE AND HEIGHT..

[@kityip1317]

Rice to the max

[@EFFEKTRecords]

Thank u :)

[@2boliviano]

Dont do it. Thank me later

[@azaelgonzalez2237]

You pregnant “no” 😂😂😂

[@Umn911]

need that hard downforce for that 160hp

[@EFFEKTRecords]

Yup, gotta make sure I get the best traction possible, keep my feet on the ground so to speak

[@Porsche-Ninja]

>>> that big serving of RICE!!! Im full. - ill b back here again if i need more rice or if i run out.

[@EFFEKTRecords]

+Ray B thank you, come again :)

[@damionbates5463]

EFFEKT Record's lol. Curved him. Looks good tho

[@boredUser2]

Imagine making fun of somebody for wanting their car to look nice without caring about the actual functionality...

[@JonSomers666]

The bolting process is incorrect for sure, thers a reason why it comes with shorter bolts! Drill out the inner trunk structure hole wider so the nut can go all the way up flush with the trunk lid, I'm sure using long bolts and securing to the very flimsy inner metals will cause it possibly bend the trunk lid, especially in due time. Also you MUST use silicone sealer and or make up a gaskets to go under the mounts to prevent water leaks, there is another KZbin video showing the destruction water will do to your car from an incorrectly installed spoiler similar to this.

[@devinjohnstone7694]

You look like you could use a ratchet set.

[@centripetal25]

Good vid. But thats pretty drastic for a wing!

[@Skuhunter-sx8vz]

I got a very similar spoiler, but the problem im having is that the mounting brackets to mount to the spoiler are just barely 1cm shy from fitting. Any ideas on fixing this or where to get a replacement?

[@fitzaustin9159]

Just wanted to ask what is the name and type of your spoiler? Thank you. :)

[@leonardofigueira1208]

The spoiler shake with wind

[@alphaone321]

Could this work on a nissan altima 2015? Looking for a friend.

[@nasrinlipi2238]

Did he said pregnant?

[@HotNHorny]

Is the wing made of carbon fiber or just wrapped plastic?

[@EFFEKTRecords]

Carbon Fiber

[@asem-nascier.k342]

EFFEKT Record's it’s a wing not a spoiler

[@EFFEKTRecords]

@@asem-nascier.k342 Thanks....

[@i.denisa4729]

Is this legal? It looks awsome dude

[@shawncouture5541]

Great Job!!!! looks nice

[@goldfamily6852]

Will this spoiler fit on 2008 Pontiac G6? Amazon says it doesn’t on my car. But this spoiler looks compatible to any car.

[@Cory989]

Fast and Bi-curios

[@highspeedenthusiast6628]

Way way way too big that downforce will ruin the performance of your car, especially on a front-wheel drive... there seems to be a culture of looking fast and not being able to go fast

[@losg90]

Didn’t know you were an aerodynamic engineer what y’all make a year? I want to make stupid easy money making dumbass assumptions

[@owenhenry2605]

What size drill bit did you use?

[@rohanlo-a-njoe5092]

do you even know jow much times you said lets go ahead... please dont do say it to much...

[@ianjohnson5543]

How long did this take you install wise?

[@enegmatixerebro]

What sucks is anyone can stright up dismantle that thing. Like taking a seat from a bike

[@DarkTahmi21]

Paint the holes.... because... Rust !

[@jvsky1140]

Yeah he will have a lot of problems cause of that

[@liamtutorials1690]

I'm pretty sure that's a wing, not a spoiler Edit: kzbin.info/www/bejne/rXiWgKqAnL2ojtE

[@lightinthedark2596]

Nice installation. What is the link to the Shark fin vortex generator?

[@Espodoesit84]

U didn’t show what screws to put brackets too wing thanks alot

[@EFFEKTRecords]

Im sorry :(

[@AutoBabe]

yeah does anyone know

[@nunopereira975]

where did you buy it?

[@seanpuello]

That's the exact one I just bought. Glad I got to see a video of how it looks

[@seanpuello]

@Alek Wolf I put it on a Nissan Altima coupe. It looks great! Easy to install. Doesn't obscure the side mirrors. Obviously it obscures the rear view. But I love how it looks. And so does everyone else

[@marklejano5888]

do u think the 4 inch mount bracket is high already how long is the mount bracket tht you have to ur car just asking

[@jeffreyng8051]

how much did you buy this spoiler? i got it for $800 Hong Kong dollars/$110 usd not including shipping.

[@31acruz]

Can you tell the difference in downward force only at high speeds, or also driving around town?

[@andyrulz2626]

Hey bro what are the dimensions of the base plates that you mounted to your car trunk? I like those for my S2000 because they look sturdy.

[@benjaminreed6652]

Andy Seewdat I actually have a wing like this one on my s2000. The mounting holes are 5.5 inches apart front to back on each plate.

[@wesambkc2114]

How much is the price of this suite and where can I buy it

[@TrainsForever]

He really made sure half of 22 was 11 😂

[@G83tv]

You do know that you are using a ratcheting wrench?

[@EFFEKTRecords]

Gary Bonner yes, but i could only use it so far because of the trunks bump line thing wouldnt allow me to get the ratcheting part on the nut...

[@Halsafe]

Then just use a regular ratchet...

[@Turbo_The_Femboy_Fox]

He can’t use that on the carbon fiber, he can strip the fabric.

[@louisgroenewald9927]

so how do you prevent it from rusting ? you surely had to add some type of coating to the exposed metal where you drilled the holes