Arch Linux ARM on an M1 Mac with Parallels Desktop

[@tobiaspowalowski9846]

Thanks for reviewing my software :)

[@spooders8943]

if anyone is wondering, it does work with UTM also. I enabled openGL experimental graphics

[@dlanelux]

Thank you - I've just installed Arch on Parallels 18. Even with a different ISO, your instructions still work and they saved me a lot of time .

[@smyrtgyz]

Thank you for all you do!

[@Smile_Pleaseeeee]

how to install it in 2024, i didnt find the same options

[@smyrtgyz]

THANK YOU, must take a moment to thank you for your time! Step by step Simply put it works, a must have for MAC M1, Arch Linux users. Enjoyed it all and learned a lot in the process. LINUX FOR LIFE!

[@eric_eagle]

This is great, thanks so much for the tutorial. Worked perfectly. I'm not sure how much I'll be in Arch, but as a learning experience it was quite easy and it's nice to have an all-purpose stripped down Linux VM for random testing. The only thing I had to do differently was to manually disconnect the mounted ISO from the Parallels CD bay before reboot (otherwise would not dump me out at grub screen).

[@Tetex]

I would be very tempted to buy a Mac if I could run Linux natively with no issues. I know Asahi is trying to accomplish this but it would be nice if Apple made it somewhat official and added bootcamp back. They could also release documentation to help people create drivers for their silicon.

[@kbaeve]

Yea I'm following Asahi closely too. If it still cant run the M1 at nearly 100% when my savings acccount say its ok to go buy it lol, it's literally gonna be the 2019 macbook pro instead (last intel afaik), just to run linux. Say what you want about Apple, but their hardware, well specifically the keyboard, touchpad and screen, is by far superior everything else i seen still.

[@Kintah]

@@kbaeve LMAO

[@fnkcgxgkgcfu]

just make a hackintoch

[@JoshuaWalker-cd4hb]

after I followed your exact instructions I keep getting a kernal panic unable to mount fs unknown-block (0,1) I'm not sure what to do from here since I'm trying to install on parallels

[@gerds.9956]

Oh that Video is very helpfull for me! Thank you Ermanno 👍🏻👍🏻

[@arijitkumarhaldar3197]

Hi Mr. Ermanno...hope you are in great health and spirit. I was inspired to get into Arch primarily because of you, LearnLinuxTV and DistroTube...its been a really pleasant experience ever since. Lots of thanks for your unending support to the Linux community in particular and Open Source initiative in general. I particularly like your way of making videos where it is 95% general instructions and just a little bit of personal choice. It leave a huge field for us to explore and choose from..yet have the instruction video relevant to whatever choice we make. Hope I am not asking too much...but would it be possible to do a new Artix installation using OpenRC? I am sure I can do it myself...but its informative to see your take in it. You don't have to show us any repeatations that you already covered before, just anything new and updated that we have to keep in mind.

[@eflinux]

Thanks! Will look into it :)

[@primeix]

How come I get (X86 emulated VM has incompatible configuration. (From Parrellels)) When I try and do it?

[@szneka12]

I tried installing but got stuck at the Wi-Fi part (connection just doesn't work) 😕

[@MichaelBanditt]

Hello Ermanno, thank you for the great insight of Archlinux ARM. Could you tell me, why the content of the /etc/fstab File is commented out with a '#', please?

[@_notmexd_]

Also 1 tip don't try to change settings before the installation with parallels if you do it breaks the iso

[@gmcenroe]

How would one delete the ArchLinux from parallels? When this is done does that also remove the grub boot menu?

[@andr3970]

How do you exit when you enter in terminal codes? I'm stuck because I don’t know what buttons you press to exit from those parts.

[@gabrielbastos1854]

press 'esc' then type ':wq'

[@Zoolookuk]

I followed this, but consistently get package failed to install on the boot loader, regardless of which.I choose, so I am stumped.

[@gmcenroe]

I had been running Arch Linux with KDE Plasma for many months after using your install process. With latest update I get the black screen of death when booting up. Are you having any problems with latest Plasma release? I also did a complete reinstall and it worked for about a day, then the same problem occurred. I will give it one last try and if that fails, will try another desktop besides plasma.

[@R1D3R_]

Please make and upgrade. I managed to install it yesterday in the tty after 6 hours because the GUI installer didn’t work.

[@szneka12]

Any tips on extending battery life on my Macbook running Linux in Parallels?

[@komi_maru]

use ASAHI instead.

[@maynnemillares]

This can be achieved for free using UTM instead of the expensive Parallel. I use Arch Linux ARM64 everyday on my M1 Mac Mini under UTM.

[@gabrielbastos1854]

Did you install arch with UTM just like he did in the video or did you installed it in another way? I'm asking this because I tried to install arch with UTM doing exactly what he does but it doesn't work. When I finish the installation, everything starts again, nothing changes. I'm clueless since I have no experience with Arch or Linux in general

[@khalilassefchettaoui9249]

@@gabrielbastos1854 you have to eject the iso

[@highbread817]

I can use Parallels for free over and over if you uninstall and reinstall with a new account, was able to play Fallout New Vegas all I want that way 🤣

[@Piola73]

I would like to know if is it possible to "upgrade" Linux Arch" into "Black Arch"....

[@LuisClement]

Great work but cannot enter my password when it boots seems not to recognize any mouse or keyboard input, any clues? Thanks. It worked after a couple of restarts! Thanks

[@craigrohn9938]

The issue I'm encountering with this method is that when rebooting post-install, grub or systemd-boot simply reboots into the install ISO with no option to run the new installed system. Installing from the ISO on a removable drive and then removing the drive post install throws the system into the GRUB shell (or its systemd equivalent) either way, the system cannot boot the new install.

[@craigrohn9938]

Or it installs and then selecting the install causes a kernel panic....

[@armaanlala6828]

@@craigrohn9938 This is the exact same issue I was getting. Were you able to fix it?

[@gulenadam8259]

Can we install games and play it? like games in protondb

[@MiguelPerez-hw2ll]

Can I do this with vmware fusion tech preview??

[@maynnemillares]

You can achieve the same result for free using UTM instead of Parallels. It also provides an ARM-based hypervisor.

[@peterjansen4826]

To swap or not to swap, that is the question. Does any of you think that it is useful to swap if you have 32 GB of RAM and don't do insane vidoe-editing or compiling?

[@eflinux]

I honestly don't think so, but it still considered good practice...

[@peterjansen4826]

@@eflinux So far I never noticed any problem while not having used swap in the last 2.5 years.

[@JMX246]

Stuck on "Generating container in /archboot" - stalls at 40%

[@bakieral]

Never used macintosh with linux. Can someone explain more about this parallel desktop feature? So if i boot up the mac will there be a question to chose which operating system to run or arch will only run if i use parallel application?

[@eflinux]

Think of Parallels Dekstop like Virtualbox, only it is not free.

[@bakieral]

@@eflinux Hmm ok i got it. Thank you.

[@maynnemillares]

@@bakieral You can achieve the same result for free using UTM instead of Parallels. It also provides an ARM-based hypervisor.

[@Sergio-oz5xk]

Hi! what version of parallels are you using? Because i have a mac m1 and paralles desktop 16,5 and it doesnt work. is version 17 necessary? Thank you so much

[@eflinux]

It’s version 17.

[@Sergio-oz5xk]

​@@eflinux Oh okay, thanks! If someone asks you about version 16.5 I confirm that it does not work nice video boss Greetings

[@zubiarfan]

Isch es au möglich zum da mit UTM installiere anstatt Parallels?

[@eflinux]

Ja schon, wollte auch ein Video mit UTM machen, bin nicht dazu gekommen.

[@UrRealestCritic]

hello does this still works

[@jirkadolezal8127]

👍👍👍👍👍👍👍👍👍

[@Appalling68]

Interesting video, Ermanno. Thank you. I'm just sorta wondering out loud WHY anyone would want to do this? I've seen posts in various forums that you will lose at least some of the functionality of the Macbook/Air when installing the Linux kernel (irregardless of DE) to it. Now, I'm NOT a Mac user so I don't know, but I'd sure like to know why people would want to do this. I'm not trolling here, I'm just super curious. Thank you! 😃

[@eflinux]

Hi! This is actually installed as a virtual machine, so for the functionality of the machine everything still depends on macos, as on x86 a virtual machine in VirtualBox. At the moment only Asahi Linux is running on metal, but it is still in alpha and not everything is fully working yet. However, since Macs with T security chips it is true that some features are not available on Linux. That started around 2016.

[@Appalling68]

@@eflinux Geez, I'm sorry to waste your time, Ermanno. It didn't clic in my head that Parallels was a hypervisor. 🤷‍♂

[@eflinux]

No worries 😊

[@taninota70]

don't work in my macbook Pro M1 Max

[@eflinux]

I’m not sure if there are any changes by the Max, but that’s possible.

[@ravenstone01]

My M1 Max didn't work either. I can login, but before login I get a message "failed to load reglatory.db". I managed to move forward but after getting everything started I rebooted and got that same message with Login prompt but no ssdm. I logged in and ran ssdm, but that only locked up the system. Not sure what's going on yet.

[@eXsoR65]

@@ravenstone01 I’m facing the same issue on a MacBook Air M1 😢

[@eflinux]

Yep, it doesn’t work for me anymore neither

[@wildermiranda3576]

.. .. and.. how to install Parallels Tools?

[@balramchatria]

W r u now

[@ceciliadixon3767]

PЯӨMӨƧM

[@HectorRodriguez-sd3rl]

Finally! 🫣♥️

[@DaveFlash]

tried to start this, but the keuboard does not work, i can't hit enter at all to continue the setup