Egr cooler cleaning with oven cleaner

[@tomhelsby5546]

Great video. I am doing intake manifold cleaning tomorrow on my Mazda skyactiv. so all components will be getting a blast from Mr Muscle

[@kennedysgarage3281]

Once you have the manifold off give it a fast scrape and coat it it Mr Muscle while cleaning the intake ports. Work on 1 cylinder at at time, with both valves closed. Scrape & hoover first, then you will need to use compressed air in by the valves. It works out quite fast & clean like this 👍👍

[@robertboland3923]

The auld durty diesels are a houre for the soot build-up, not really surprising when you think about what comes out the tailpipe. I've used oven cleaner a good few times myself to clear soot up, once there's nothing that can be damaged it's surprising what it does, anything that's left afterwards can usually be removed with little pipe cleaners and painters panelwipe/degreaser, if you needed to get everything off. Bit time consuming but it works. Was surprised to hear a fellow paddy! Cheers and take er handy 👍

[@kennedysgarage3281]

Hi Robert, delighted to have you watching. I don’t have too many local subscribers. But the world can be quite small nowadays. Cheers mate 🙏🙏👍

[@kennedysgarage3281]

Oh and thanks for the tips 😉

[@gavfreeman8797]

I usually use tfr what you put in steam cleaners Then after it has soaked in a buckeye we put the pressure washer on full heat I've used Mr muscle but only on turbos and to be honest it works better when the turbo is hot but everyone has there own method Peter good vids keep them coming

[@kennedysgarage3281]

I was only messing to see if it was worked any bit 🙂👍👍

[@richsmif]

i cant afford to replace mine but willing to give it a deep clean. so thanks for this. will give it go.

[@kennedysgarage3281]

Fingers crossed it will work Richard 🤞

[@cypeman8037]

I used it on my alloy wheels, don’t leave it on more than 5 minutes. It does the job.

[@kennedysgarage3281]

Good advice, thanks mate 🙏🙏

[@isalmankhan1]

Great work Bro👍 Could we use AC-Delco Carburetor Cleaner for this purpose? I've used it intakes, cylinder head's & blocks work's well, but your advice is a must😉 Thanks for sharing, Stay Safe👍

[@kennedysgarage3281]

I just thought it was worth a try just to see if it worked as others have told me. I would also say the AC-Delco carb cleaner would be worth a go too 🤔Cheers Salman 😉👍

[@mikeberry304]

Dont let the missus know you know how to use that stuff Peter , or you will get given a job at home to do 😂, great result 👍👍

[@kennedysgarage3281]

😂😂😂 she will have me power washing the oven too 🤪👍

[@mikeberry304]

@@kennedysgarage3281 brilliant

[@wackey3455]

Them egr coolers cost a arm and a leg I be taken mine out to give it a blast no harm in it I think we call it a service on the egr good experiment perter

[@kennedysgarage3281]

I was going to suggest it needed to be replaced but I was happy enough with the results, sound Wackey 😉👍

[@oliverpickstock4018]

Good video pal! It’s been 8 months, had it come back or did it solve the problem? Was it possible to look in measured values and see the flow rate?

[@kennedysgarage3281]

No comeback yet but wasn’t fixing any issue with the egr cooler, I was changing a turbocharger & cleaned the cooler just as preventative maintenance 😉😉👍

[@rogercollingwood8234]

I believe that EGR cooler is from an Audi. Is it entirely made from stainless steel, rather than aluminium, like some other EGR coolers? That might explain why oven can be used. I also believe that some of the blockage is caused by crystals of AdBlue. These may need some other solvent to remove them or just mechanical cleaning.

[@kennedysgarage3281]

Hey Roger, this cooler is from a 2016 Skoda Octavia 1.6 diesel. It is all stainless steel & yes the blockage mostly happens due to Adblu residue buildup. I was given instruction to refit the cooler after turbo replacement & just thought I’d try oven cleaner just to lessen the chances of being caught with it being blocked 😬😬 Thanks for watching & commenting 🙏🙏

[@careyautorepairs]

Next time you do this I think it would be cool to see the live data before and after. P.S. I wonder if this would clean nice in a good ultrasonic cleaner for 2 hours.

[@kennedysgarage3281]

I would say the ultrasonic cleaner would it perfectly, I was only messing around to see what the outcome would be. I’ll record a bit of live data on the next one 😉👍👍👍

[@careyautorepairs]

@@kennedysgarage3281 Please tag me in it when you do as I would love to see that video and I think the rest of us would love it. Thank you for your time buddy making the videos.

[@kennedysgarage3281]

@@careyautorepairs 🙏🙏🙏

[@rosejuttancroos8081]

Wonderful. Is it a good idea to blowing air into holes after aplying Mr.Muscle or carb cleaner ? Or will blowing air damage the egr cooler ?

[@kennedysgarage3281]

The egr cooler itself is made from steel so in my opinion air pressure or carb cleaner shouldn’t bother it in the least. I would avoid sticking anything hard into the holes though. They are not round all the way through 😉

[@johac7637]

Im messing with a DD15 Daimler engine, am trying several things, steel pistons, useng a crock pot, heating the dip, trying, Simple Green, Berrymans , TSP, and will try yhe def fluid, something will work im sure.

[@kennedysgarage3281]

Nothing like a little bit of experimentation 😂😂😂 Good luck with it 🤞🤞

[@johac7637]

@@kennedysgarage3281 what I did find is, Simple Green all purpose, and Goo Gone Oven Cleaner, SG in a crock pot, full strength, GG straight undiluted in a cut off milk jug, cut the carbon very well, except when it was grey, burnt yo pure charcoal/carbon, then i needed to scrap it off, came off in powder form. The Daimler pistons are steel, and the skirts below the oil rings are coated with a paint? probably a Teflon type for extra friction reduction if they slap, the SG and the GG both eat that costing, experimented on a garbage piston first, so when I dipped I put the piston in and carefully filled the container. Then I also cleaned the EGR Cooler, it was gross, even after pressure washing it, it is stainless steel so I wasn't concerned using it, But people reading this, if cleaning aluminum, be very cautious as the acid will etch/dissolve the soft metals, The carb, mystery oil, EGR, valve carbon cleaners are garbage, snake oil, they do cut the soft stuff, but not the Semi hard stuff.

[@the_retired_mechanic]

I've seen people use that stuff to free up the turbo vains on ford mondeo. Drilled a small hole in casing, sprayed it in and then just screwed small bolt in to hole. Appeared to work there so why not here I guess

[@kennedysgarage3281]

I also tried it before on a turbo & it took some time but it did work too. Oven cleaner all the way Chris 💪💪😂😂

[@the_retired_mechanic]

@@kennedysgarage3281 it's not kind to your hands and face. It's no fairy liquid

[@kennedysgarage3281]

@@the_retired_mechanic no 😂 You would have to be careful 😬

[@sebastiankita]

it looks like it is lekaing coolant in the first place, or there are some major issues in the engine because this amount of sooth is not normal. i have changed mine after 160kkm due to the coolant lekkage, but it was in much better state than this one. the valve itself was competely clean.

[@kennedysgarage3281]

My one was burning oil 👍👍

[@kevinpalmer7452]

A win for mr 💪😂

[@kennedysgarage3281]

It seems to be reasonable strong stuff & worth a go before replacing the cooler, go Mr. Muscle 🤪🤪👍

[@user-jh5pz3uf8l]

U have some tips for dpf? what can i use to clean the oil out of it?

[@kennedysgarage3281]

Launch Dpf cleaner seems to be the best from what I have heard 😉🤞🤞🤞

[@Johnnyfive55]

Audi a6 c7 has this part in a position the it's an engine out job. Watched a guy do this on KZbin without removing engine and it looked a complete pig, just as hard, . 3k main dealer. 1k for a local by the looks. I would be interested in your opinion. Car's fault light has gone back off now. It has only has 100k km should I drive the ring out it and use some additive?

[@kennedysgarage3281]

The egr cooler on those block very regularly & driving it hard or additive’s won’t help. It can be changed with the engine in place but will take all day to do it & isn’t for the faint hearted. Dealers can be very expensive to do it. Watch this it might help 🤞🤞 Audi A6 EGR cooler replacement kzbin.info/www/bejne/lXi1c4Wol7CdetU

[@zeeshanshaikh5239]

Based in longford was thinking to bring to your garage but i done my self without Dismantling egr cooler, follow the jimmy instructions 🤣 first pour the oven clear throw into adblue point audi a6 then start the car on 2000rpm after pour deionized water to clean all inside then after pour dpf cleaner wynns about 4liter 3 into adblue point and 1liter by pressure gun leave about 5 hours and regen , all good 50000km no p200200 but i know it will be back again as all new audis have this shit so common

[@kennedysgarage3281]

It actually is a very common issue & quite expensive to do. I haven’t ever tried that on the car but have been talking to Jimmy Riley about it and he said that it does work, so I must try the next one. Well done on the repair mate 💪💪💪

[@islanderstalents8342]

Bro which oven clear throw you’ve used ? I have done all Jimmy stuff ,loads of crap comes out of my exhaust,but can clear the engine management light with my Otofix D1 kite scanner .Few videos talking about adblue cristallisation.Will change the dpf pressure sensor to come tomorrow and see how it goes .As my car doesn’t seems to regen after a 100 miles trip to Brighton

[@MrDaylew]

should have blocked the bottom hole so the foam fills up and stays in soaking

[@kennedysgarage3281]

Thanks mate 🙏🙏

[@redpig1120]

Can you blank it off??

[@kennedysgarage3281]

The cooler is too integrated to blank of on this model, you could possibly do an egr delete but not something that I like doing myself 😉👍👍

[@zenon407]

See how these tubes are stamped at the factory.I cut open the exhaust coolers to find out what these tubes look like, mechanical cleaning is eliminated only by chemicals.

[@kennedysgarage3281]

Ooh, very interesting. I might cut one open myself just to see. Thanks Zenon 🙏🙏👍

[@zenon407]

@@kennedysgarage3281 kzbin.info/www/bejne/iZerhZhpmayka9U

[@kennedysgarage3281]

@@zenon407 interesting, the A6 cooler is hard to clean 💪💪

[@robbettison1438]

Did it work on the car after?

[@kennedysgarage3281]

Yes, it worked out perfect Rob. And I have used this method several times since 😉👍