How to wire a float switch to a well pump

A float switch is a device that is used to detect the level of water in a tank. Based on the water level, it will open or close an electrical circuit generally used to pump water in or out of the tank.
The float switch moves with the water level up and down. An internal mechanical switch opens or closes an electrical circuit with gravity. The electrical circuit can then be used to turn on/off equipment, like a water pump.
The float switch monitors the level of water in a tank. It then opens or closes an electrical circuit based on the water level and wiring to control external components.
The float switch is installed in a water tank. First, a pre-set level needs to be made and can be done with a counterweight. Then, based on a normally open or closed wiring configuration, the float switch will open or close the electrical circuit based on its movement up or down with the liquid level.
A float switch can be wired in the normally open or normally closed position. A normally open position is open when down (low water level) and a normally closed position is closed when down. The open or closed position refers to the electrical circuit.
ALL FLOAT SWITCH VIDEOS
How to use a float switch • How to use float switc...
Float switch selector switch connection • Float Switch Selector ...
Float switch high and low connection • FLOAT SWITCH|flaot swi...
Inside a float switch • inside float switch|el...
Other videos to watch
STAR DELTA STARTER VIDEO • star delta starter con...
TIMER VIDEO • How on delay and off d...
FORWARD REVERSE WIRING DIAGRAM VIDEO • forward reverse switch...
FORWARD REVERSE WIRING VIDEO • forward reverse motor ...
CONTACTOR SELFHOLDING VIDEO • contactor self holding...
contact me here
[e-mail]
follow me on Twitter / davidssengendo
like my Facebook page / electerca
Visit my blog electrecasolutions.com/blog/
Buy contactors here amzn.to/39iW0p2
Push buttons amzn.to/3qN2DpN
AI Digital Multimeter amzn.to/2R1Q2mp
Need float switch amzn.to/34TZStI
Disclaimer: ELECTRECA is a participant in the Amazon Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to www.amazon.com

[@PaulTheghaplumber]

You are really expert sir much appreciate ,I'm from Malawi

[@sammyboit-ko6id]

Sir Eric am a practising plumber as well as an electrician am impressed by your insightful tutorial.kindly help me understand how to employ TWO float switches in a well and a raised tank

[@CptJera]

Glad that I found your video. I had not considered a second float switch in my lower supply bulk tank, only in my upper house supply tank. Smart to protect the pump if the lower bulk tank level drops too low to refill the house supply tank.

[@electreca1]

Glad I could help

[@alexeysmart3737]

Useful for my case! And I have unused wires between the storage A and the house, where the storage B is installed! Thanks a lot.

[@electreca1]

Thanks for watching.

[@Mahdiabdallah7]

Thank you very much for this information

[@danielteyehuago1633]

Thanks for sharing it with us... Very educative

[@Alice-ri7gd]

Much to learn here. Thanks for the teachings, they are helpful to me.

[@electreca1]

Glad you like them!

[@alainnya6132]

Thank you sir for your lovely video.I really appreciate it

[@juliusngosa4328]

Thanks for the video it was helpful

[@motionsick]

Another great video. Thanks mang.

[@judyreyjumamoy]

thank you very much for your effort

[@ruralsolutions825]

Hi brother, i must be candid to you, you are doing a wonderful job to many people out here. Keep up the good work.

[@electreca1]

Thank you, I will

[@zakariaabdi2316]

Thanks Teacher 🙏

[@danielteyehuago1633]

This is very educative, thanks for sharing it with us...

[@electreca1]

Thanks for watching

[@fernandoagapitojr6361]

Thanks for the tutorial sir bless you ❤

[@venenareligioest410]

Thank you 👍

[@hamishamis8848]

Nice lesson.....good and clear

[@linossinkala7840]

Super ,thankyou sir for every contributions you have made inthe electrical arena

[@electreca1]

Thanks and welcome👍

[@devonsalmon7554]

Respect again for these videos

[@electreca1]

Thank you

[@kimj6806]

Did this one following the same format and it was excellent.Shukran

[@electreca1]

👏🙏

[@emmadanso7066]

Thanks for the video, could you kindly add a practical video whilst installing both in an upper tank and a water well

[@user-ok1sr6xd5p]

Nice job man

[@musasuso6056]

Thanks so much brother

[@waheedabiola7382]

Thanks a lot bro

[@lameckokongo6406]

Thanks brother. Now I know what's a floater

[@DavidMbewe-mm9rg]

Thanks alot!

[@demukaconceptelectric]

Thanks for that lecture,I really appreciate.Can you kindly do a video on voltage drop, how to calculate it and how size the right cable for various installations

[@electreca1]

Noted

[@demukaconceptelectric]

Thanks

[@erickngala3945]

For real this staff you are doing inanihelp kwanzo ile ya star delta🤝🤝🤝🤝7

[@alijuma1815]

It is good man thanks

[@IKEAJAYI]

Really good content

[@yannicedward6447]

Wonderful keep it up

[@user-fx9is6yo7v]

Thanks sir you are good

[@knightjohannesaas2065]

Thanks, this is very educative,.. I would love to ask regarding the floats switches that are connected in series, I understand that it's for a reason that all pump should pump at the same time.. But here is my question... WHAT HAPPENS IF I CONNECT THOSE FLOAT SWITCHES IN PARALLEL?

[@jimahinsene4683]

Thank you very much, what, if it is a narrow fellow(submersible pump)?

[@electreca1]

It still works.

[@CollinsUkpomah]

Thank you.but what if is one pump for the two tank

[@sangotrees]

Nice one fellow Engineer

[@tendayimichaelchikava3685]

This is great

[@kingso8589]

Please can one float switch use for this operation, I mean only in tank B to make the system work perfectly?

[@sohailjanjua123]

Hi, I like your video. Thanks

[@electreca1]

Thank you too

[@veporelijah2533]

Kudos to you bro

[@veporelijah2533]

Sir if the wires of the floating switch is brown blue and yellow which one at of them is live or source sir

[@edgarbanuelos2660]

Nice Brother

[@theskyline1425]

Could you please elaborate more about the (Normally Closed) NC and Normally Open (NO) wires of the float switch. Why does tank B need its switch to be NC and why does tank A need its switch to be NO? What happens to the ball inside the switch in the NC and NO operations

[@BrianChilongo-id4ph]

Would mind to help me with a blue print control and power circuit on how to conect the float switches for a ground tank and overhead tunk

[@milkyway808]

This is a good teacher 👏🙏👏! I wanna learn more sir!!Do you have a video How to wire a contactor or sensors

[@electreca1]

This may help kzbin.info/www/bejne/apyokoisq6aaqqc

[@katendeabbey7908]

If I want install one float switch to the above tank do I do.

[@kiptookelvin6029]

Thanks for the video but i am still asking on how to identify the common wire...please help me and many others

[@fahdhelmi4453]

Thanks for video ❤️, but I have a question, can you actually connect the floater to the pump itself, or do you need to connect it to something else first?

[@BS-ls2og]

Great video ,many thanks Have you got the wiring diagram of the dual tank system?

[@electreca1]

You mean the circuit for this two float switch wiring?

[@BS-ls2og]

@@electreca1 Managed to find it your videos. Many thanks once again.

[@abubakershafik8645]

I would like to know how to connect the two switches with a contactor

[@254wakilongo]

More videos bro tunaenjoy sana

[@electreca1]

More video are coming and thanks for watching.

[@pradeepmahendrasemage4043]

Hi, Dave , How are you sir ,thank for the video episode .

[@pisabelinho5200]

If you conect the two comun wires (blacks) how can you end up with two remaining wires blue and black???

[@user-jl6yw7hc3l]

Is the float switch will be set in the tank please

[@suleimanislam7777]

Thank you eng devid

[@electreca1]

You are welcome

[@user-my9gc3ls9t]

Wow, am really impress bro, but u Don't finished the video sir, and question go like this if it's only one house how to do connect it?

[@heshanshibry6575]

How far can this float switch work from the pump. Can it pump from 20 km away from the tank.

[@jacobafor5966]

How can one build panel controlling 3 pump

[@yigaumar6640]

Talk about how to connect a float switch to a submissive pump

[@Xxxcappie23]

Good video. Question : was there there only one pump used to fill for both tanks? And secondly the tanks are independent ?

[@electreca1]

The pump only fill one tank, and the second tank is filled by gravity or by well in case its sump.

[@ekiabonny5388]

This is great! In most cases people think of only overhead tank forgetting to protect the pump from incident where by supply won't be there when needed to feel the overhead tank. Otherwise I think if you're getting supply direct from the swamp or River directly, then there won't be need for float switch in the side of underground tank. ❤

[@mathiasphiri722]

So this works to break and make both DC and AC circuits right?

[@electreca1]

Thats correct

[@wonagoliinnocent3264]

What causes decrease in pressure of water in wash basin

[@user-kc5kh1hl6t]

How to connect those two floating switch to contactor

[@abomad.6961]

Interesting

[@neilluyt3737]

Can you connect a float switch directly to a pump. For instance I have a simple garden pump connected to a tank that that I fill with greywater. Can I connect a float directly to the pump or should I rather use a relay switch?

[@electreca1]

You cant use float switch directly, use a contactor or relay.

[@neilluyt3737]

@@electreca1 Can I ask why?

[@hamidabadi8368]

Do you offer online training

[@jacobafor5966]

Good morning sir

[@user-bw7sf3tn1u]

Please do we have 3phase float switch?

[@electreca1]

No, you don't need 3phase float switch because is just a control switch

[@user-bw7sf3tn1u]

Which wire is the best to use to connect it

[@electreca1]

2.5mm minmum, the size can increase depending on the length of the wire.

[@ayomidesamuel6540]

Pls how can we get the real connection diagram

[@wilsonjudy9515]

please talk about rotary switches......

[@sammyboit-ko6id]

Kindly talk about a float switch attached to pump deep down a well.thanks

[@electreca1]

Kindly watch this video here will help kzbin.info/www/bejne/fHzdg4ttqrqmrbs

[@dominicmuli3826]

Kindly share the circuit diagram of the two float switch connection

[@bamutangeronald4474]

Indeed a winding data of 3 HP motor

[@veporelijah2533]

Can a one float switch controls two tanks of water at the same level of the water

[@electreca1]

Yes, if the tanks are interconnected and served by one source.

[@veporelijah2533]

Yes they re connecting together, thank sir

[@veporelijah2533]

Happy last Sunday of the month sir, the black wire stand for supply right why the brown or blue stand for neutral sir.

[@veporelijah2533]

Sir I want you to teach me how to connect one floating switch with a two tanks of water at the same levels sir

[@electreca1]

@@veporelijah2533 There is no neutral on the float switch. Black wire is common/supply, brown wire supply the contactor if you want to fill the tank, blue wire supply the contactor if you want to empty the tank. Watch that same video carefully and you will get the concept.

[@Azemeraw.Electro-Mechanical]

Hello i need books too

[@ebrimajarjue4374]

I still don't understand the connection

[@JerryDoe]

yeah that is not the way to do it ! if the float switch has any leakage you can create dangerous currents traveling up to the showerhead or tap. you need to wire it through a contactor especially with higher amps, float switches are not designed to run a motor directly. This is why we have electricians !

[@bamzigyzaga5077]

Draw a diagram

[@user-dg4zq6hw1h]

❤ he

[@scottiemurdaugh]

You never connected the float to the pump

[@mgangackazagata6484]

Where are men