Electric Bike component tester - the perfect troubleshooting tool!

[@Oldmanlearns718]

Yo dude how bout showing us where to get that adapter from the hub motor to the tester. you nonchalantly said i have a cable adapter. whered u get it man ?

[@richardburguillos3118]

Great little tester. I agree, much easier than trying to stare at a multimeter. Take it a step further and show something failing and how one might fix it and then see how now it passes. Thanks

[@DAJones-nm8qp]

Where did you get the Hub Motor adapter?

[@renobikeproject]

has he responded to any of these comments? WE all need to know about the adapter! this unit is no good without an adapter

[@richardminogue6451]

Kyle having such a diagnostic device, make perfect sense. I have a Rad City that only has 162 miles on it. A month ago, I went for a ride on a very hot day, and parked the bike in the sun for 10 minutes. When I went to start out again, the PAS, nor the throttle worked . Rad was good with their response, sent me a controller and a wire harness, but still not working. Now waiting for a new motor and wheel. Cars have an OBD 2 diagnostic device, and it make perfect sense to have a bike diagnostic device. Thank you.

[@FSK1138]

that is a very useful tool please stock it . my ebike was in the shop for repair or 2 weeks for something i could have fixed my self . i got my ebike in may 2018 from a Montreal dealer ,your channel has demystified the building repair and every thing i should have known before i bought it.

[@laplantemichel709]

Ok if i understand correctly this tester is not plug n play with the connector's on the bike you need to make another cable with more basic connector's? Thank you

[@jstar1000]

So I can't find the adaptor cable, where does one get that, to me without that this thing is almost useless.

[@ckwidmer]

Came here to ask the same question!

[@machfarayoub]

Hello did you find adapters

[@billchin4318]

@@machfarayoub I would build my own adapter cable using a motor cable from Amazon with the correct mating connector to the tester.

[@Repair5700]

Where can you order this adapter cable?

[@Jacobmainchannel]

Where do I get the adapter you are using I have a triumph ebike and I don't know what adapter I would need but I definitely need one could you get back to me and help me out a bit here.

[@tedmallen3139]

Do you need to buy a. motor adaptor like you used to go with this tester?

[@curtisbrownelectric]

Hello and good day, any link to finding a adapter cable for my juiced hyperscramber gen 1 with the 11 pin julet connector ? Id love to diagnose my non working bike, i have two 1100w motors that are probably fine but dont spin.

[@Jacobmainchannel]

I bought one recently and I noticed the plugs aren't like mine do I need an adapter plus I'm not sure what to do with the red and black wires on the plugs.

[@Tonedog88]

Outstanding video, but and the tester looks great. However, you only briefly mentioned the adapter cable. That, so far, has been my main problem in testing my broken ebike. I have a Cyclamatic that won't start. I have a meter but I can't figure how to make the connections, which, on the ebike, are extremely small. Know where to get that adapter cable?

[@brnorman33]

Did you ever find this cable? I have similar problem with my Addmotor Ebike

[@renobikeproject]

i need an adapter too. where in the world can i find an adapter for the ebike tester??

[@Abz_007]

@@renobikeprojecthave you found one?

[@Me_ThatsWho]

yes, i would be interested in buying this. also, kindly make a video on how to test and troubleshoot one's Lithium Ion battery (stupid, yes, but there be more to it than i currently know).

[@willescalante7922]

I'm a big believer in using the right tool for the job. I would definetely be interested in this tool. Thanks for all the great videos. Please keep them comming.

[@Area13ebikes]

Sure thing! You can get your Bolton Ebikes Electric Bike Tester now! :)

[@mahinuddinkhan1110]

@@Area13ebikes sir digram plz tester open the part name plz plz

[@360-vision]

Do you know of an adapter for the controller? My controller is a 5 pin …. I got one like yours on order for the Bafang motor … Im UK based

[@truhunk1]

My ebike has a round 9 pin connector, so I guess I need to buy an adapter somewhere ? It takes over a month to receive one from Amazon. Also, why is there 9 pins, most ebikes only have 5 wires going to the motor ?

[@davidrossmiller8349]

Where did you buy the extinction adapter please.

[@MrBrent3323]

Great device for us to have on hand! Very interested in having one!

[@brucepiper5447]

Where can I buy the connectors to plug in the tester?

[@renobikeproject]

im looking for that answer myself. did you find anything?

[@rhoemberg1969]

Always good to have the right tool for the job.

[@lowerastral1963]

Yes, please get in stock! Thanks!

[@Area13ebikes]

It's available if you haven't gotten yours yet!

[@devildriverkoln1967]

@@Area13ebikes continuous motor phase on the yellow wire and on the green wire

[@louisatu-tetuh3244]

Will like to see the review of the 2019 Radrover. Do include in the problem you had with the bike.

[@henrikjonsson4340]

Where do you find tha adapater cable?

[@kazhankazhanovych6895]

for me it is the first video about that matter, I never thought that kind of device existence

[@rondomon7020]

Hi can you tell me where you got the adapter at? Website please thxs

[@rickc2222]

Where did you get the adapter for the round julet style plug? make your own?

[@johnbolster9807]

Kyle, I think that would be a great thing to have especially if you don't have a lot experience working on your ebike. If the cost is expensive maybe 2 or more friends could chip in together to purchase it.

[@johnrisley3320]

Where did you get the adapter from?

[@HammerHed13]

Thing is worthless without adapter cables, and those evidently are top secret and un available.

[@renobikeproject]

@@HammerHed13 shhh its secret..lol. im bummed too. i wonder if its something you have to make yourself

[@adolphaguiar2226]

Hell yes I would like to have one Adolph thanks you were can I buy one

[@kenpatel9728]

I like video, I have quick questions,For break switch test which cable connector wire using colour of wire?

[@Nigel-vq3ih]

need one of those for my evokes , I live in Australia and have to checkout the item.

[@Dave-YellowDogWelding]

Very cool. Glad there is more and more about ebikes out there. A very good time in catching up to what is going on in other parts of the world. Any comments on ways to get around speed limiters on ebikes? I have a Badass Box 4 mounted on a E6000 shimano set up just waiting for a couple feet of snow to melt so I can test it out. Ha!

[@theebikeguy3852]

Hello Kyle. I will be glad when they make one of these for Hygo/Juliet conecters. For now I'm going to buy a couple of Hygo conecters and cut them in half to plug up and test them. Have a good day.

[@MovieThirstDotCom]

my hull plug doesn't fit the one on the tester! what do i do?

[@robertmotion]

Great video. Question. I get the lights coming up on the controller tester. Phase wires are not connected, same as yours. Instead of rotating my wheel counter clockwise to get the 1-2 light pattern, I have to rotate wheel clockwise. I think that’s what you’re doing as well. Lights come on. Am I okay? Great tutorial. /Bklyn👑

[@curtwuollet2912]

Old post I know but, would this thing help you matching a motor to a new controller rather than the guessing game?

[@spacefightertzz]

Thanks for this tutorial video. I have a "ebike testing device" device and wasn't sure how to use it. I bought an escooter and it broke down within the 1st week at 110 kilometer odometer.

[@ken46120]

Yes I’m interested in the component tester. On a budget of course but interested.

[@Area13ebikes]

Great! Here it is: boltonebikes.com/collections/tools/products/ebike-tester

[@georgewheeler-brownlee987]

Thank you for the video. I ordered a tester a couple of weeks ago not knowing it was going to be coming on a slow boat from China. Strongly suspect that stocking would result in some profit.

[@Area13ebikes]

Thanks for the suggestion.

[@icedave2004]

Nice handy little tool I would buy one

[@Area13ebikes]

We offer them at boltonebikes.com

[@orlatris96]

Hi, my name is Orlando, I'm from Portugal and I don't speak English. I want to thank you for the video, very simple but excellently explained. I would like to ask you to help me with a question I have. To test the different components, engine, module and accelerator, none of them need to be powered? Just be connected to the scanner? Thank you and may you always continue to share your wonderful work. a hug

[@shutupdog11]

I love your shirt ! Very cool ...

[@Area13ebikes]

Thanks! We have cool ebike shirts at boltonebikes.com

[@arrowspellets2728]

It would be a big help, looks easy enough to use.

[@Area13ebikes]

It really is an awesome tool!

[@davidconey3665]

Good informative video....BUT....where do we get the adaptor cable from ??

[@henrikjonsson4340]

Hi thanks! A Q about the throttle we dont use in EU or some parts not. We speed up with the use of 1-5 voltage regulater and a switch from the pedals. and when you stop pedalling it stops. Will it fit for us that device you had there?

[@Ducky-oo7]

where do i get a connector from the pin plug to the clips on the tester?

[@pietypereira8239]

Great video. How can I check a pedal assist sensor.

[@edwardswitalski9292]

Would be inerested in obtaining one of these component testers.

[@plummjk]

How do you interface it to your specific bike cables?

[@THENEWWRANGLER]

Relly like your videos learning a lot. Soon I am adding a second battery to my bike I’m going to set it up so that I can use it on both my bikes switch it back-and-forth so they’re both set up to except it quickly it is a triangle battery I am buying from Ali express. 52 V 20 amp hour I plan to use it on my hyper scrambler from Juiced bikes, And also hopefully swap it over to my lithium cycle super 73 Rose Ave. I would love to to see videos about adding new 2nd batteries and how to from you

[@RidingLightning]

Where can we buy that adapter and what is it called?

[@Doggeslife]

I wish I knew how to use this on a EBO hub (Electric bike outfitters). Their rear wheel has a 7-9 pin DIN connector, and I have no pin-out guide to tell when what each pin leads to.

[@paulshutts6412]

I purchased a motor kit, 48v, 1000 w battery and connect but bike has a julet harness. Can this tool test wires inside the julet harness. Bike worked one day. Second day twisted throttle and front hub motor jutters back and forward. Wheel not fully spinning forward.

[@evewilliams5017]

Love the channel..question..when testing the hall sensors my blue green yellow lights flicker but all 3 stay lit up after the wheel stops spinning..is that faulty?

[@user-tofu4356]

CAN I HOOK UP 2 48 VOLT MOTORS WITH 2 BATTERYS WITH A BLENDER THAT HOOK UP 2 BATTERYS TO ONE MOTOR. THE CENTER PORT ON THE BLENDER WILL HAVE A 3 WAY Y SPLITER TO GO TO THE TWO CONTROLERS FOR THE TWO MOTORS. SOME ONE TOLD ME THAT IT WOULD BLOW UP MY TRIKE IF I DO THAT. COULD YOU ANSWER IF THAT IS TRUE. THANKS ERROL

[@patrickgaerdelen]

Hey, where did you buy the cable ? I found just the one with a round plug , mine is square ( for qvick E-bike )

[@Abz_007]

Hi have u found one

[@grahamgrant8848]

Can anyone detail the adapter cables I need to test the motor?

[@renobikeproject]

damn i was hoping there would be an answer here.

[@wildncrazyguytv]

Hi. I just got a Lectric Xp about a week ago and the back tire is locking up. I loosened my brake calipers and it will move about 2 feet freely and lock up again!

[@Timo-Epis]

Does the motor still need to be connected to the controller or not?

[@gabrielsalsedo]

Where did you get the adapter to test the motor?

[@MrBossman605]

I have a Sohoo ebike 3 months old, the display comes on briefly then goes off, error code 006. I purchased one of these units still waiting for it it arrive, do you think it might prove helpful diagnosing my problem?

[@H4N5O1O]

where did you get the adapter cable ?

[@machfarayoub]

I have a surron l1e can i use it ? And where to find adapters please

[@jameshenrie5841]

I want to buy one,!, how much do they cost and where?

[@dixter1652]

did you get some of these in to sell ??

[@Area13ebikes]

Yep! They are in stock! boltonebikes.com/collections/tools/products/ebike-tester

[@livinglifemyway7349]

so it can test a motor controller .. any voltages or wattage specs needed to use the tester?

[@Area13ebikes]

Nope! It should be able to test most ebike kits.

[@HarlanJette]

Sounds Great! How much and how can I purchase one?

[@frederico_flores]

can this test sensorless (no hall) motors and controlers ?

[@melvinbelcher7606]

Will the ebiketester work on a lectric xp

[@mikerennie507]

Dude why did you not show testing the controller?

[@colorfulsimplelife_art974]

Yes, I would be interested if it works with a 2018 Radrover and the price was within reason : )

[@Area13ebikes]

You're the random winner of the t-shirt! Please email [e-mail] with your contact info and size.

[@colorfulsimplelife_art974]

Awesome!! I just sent an email from shiitakebeats with my info : ) @@Area13ebikes

[@1972wesley]

I'm interested. A connector for g510 controller would be good for me.

[@MegaFoobar]

Tell us more about that adapter at 1:12. Where did you get it?

[@samuelparra9712]

Rad Power uses a Z916 connector for the stock bafang motor, google that and find one with bare wires on the other end.

[@張點點-s6o]

*Works great, nice height.*

[@kingfergus55]

There seems to be quite a lot of misinformation about ebike motors. For example, the Rad Mini 4 in the USA has a 750W motor but they have 250W in the EU. On a forum I heard they are actually the same 750W motor but there is a "software limit" on the EU models. Is there a way to use this tester to confirm the actual Wattage of the motor?

[@jerseyguy-hq8wv]

Whatsup Kyle? I would definitely purchase one if you were selling them . You're the Guru.

[@Area13ebikes]

Hey Jerseyguy 9087 - boltonebikes.com/collections/tools/products/ebike-tester

[@davehumphreys1725]

Thanks for the video. Just one thing though, I'm currently having trouble with my pas sensor. My problem is that I dont know if the trouble is in the sensor or the controller. I didn't notice if your tester had an input to test the pas sensor itself, of the sensor circuit in the controller. Does it? Many thanks

[@julirichmond3]

Yes for the USA. WE want the tester. Yes please

[@suepaquette42]

My pas only works in mode 3 and the walk mode doesn't work at all. Will this detect the problem

[@melvinbelcher7606]

I am very interested in the led bike tester. I also will eventually get a statiator charger. Being an aircraft mechanic and a master auto mechanic for the last 30 years,I will buying many tools.

[@thegee-tahguy4877]

Okay, I'll take it! How much and where do I get it? I got a similar one for my 48v elec scooter, but I don't know how it works and I don't have the adaptor cables.

[@Area13ebikes]

boltonebikes.com/collections/tools/products/ebike-tester

[@renobikeproject]

@@Area13ebikes yes but what about the adapter cables?

[@kimtreadaway3470]

Yah Kyle sounds good

[@cellistpilot]

What is the price of this tester? I would be interested in purchasing one if it's not too expensive.

[@Area13ebikes]

They won't be!

[@cellistpilot]

@@Area13ebikes What is the approximate price, the price range, etc. and sign me up!

[@Area13ebikes]

Inexpensive, and working on it!

[@myscreen2urs]

can I diagnose a bad controller with this?

[@monkcheetah8203]

Looks to be a handy tool to have in your box of tricks. 👍

[@Area13ebikes]

Hi Monk Cheetah, It absolutely is a very handy item to have.

[@lol-we8os]

Hello my friend, can I install EVE 280AH 3.2V LİFEPO4 batteries to my electric bike

[@gregeastman8609]

It's been a while- did you get them for sale yet?

[@jrelliott1015]

Did you get this?

[@mattm6178]

whats that adapter cable called?

[@HoogenboezemTweewielers]

what is the price of the tester?

[@フォグマシン]

Great idea, but it's not a universal tester. The plugs won't work on my bike.

[@devildriverkoln1967]

continuous motor phase on the yellow wire and on the green wire

[@cocoliso1946]

I would like to purchase that tester, thank you

[@gctw2341]

Seems like you need an adapter at times to hook up to the meter though...

[@renobikeproject]

any luck finding an adapter? i need one too

[@tomsan7742]

I saw a vid where the U2br put conected two ebikes w/ a seat between for a parapplegic friend. JerryRigEverything - Homemade Off Road Electric Wheelchair then I saw this vid ElectricBikeRevie - Sun Seeker Fat Tad Electric Trike among the list of required items - i would believe - reverse should be included. just an idea for you ( or anyone else ) as a crazy, over the top, but still totally cool future build. luv your channel for the impressive instruction vids you put out. ty

[@Area13ebikes]

Reverse is very possible and not that difficult... stay tuned.

[@dixter1652]

please put me down for one... thanks

[@elvisridelbikes5406]

I have an error 30 popping up on my ebike. Any ideas on how I can resolve this issue?

[@parastools]

Thanks sir for this video ,have you made it for your own or it is available in market?

[@ChrisBFerguson]

I have one and must be doing something wrong because I connected a brake level that works with it and nothing. I know it works because I disconnected from a bike and connected it to the tester and nothing.