Electric Drill Concrete Mixer Restoration | Hitachi Mixer Drill

Electric Drill Concrete Mixer Restoration Video
I found this mixer from Japan recycle shop only 15$. It is Hitachi mixer drill, but I don't know which model it is. It comes with really poor condition and it doesn't work. After the restoration It works very well, I really love this mixer. This video will show you the way I fixed and restored it back to alive again.
I hope you find something useful & enjoy from this video!
I am happy to receive your feedbacks, advices, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
--------------Thank you so much for Likes & Comments--------------

[@billb.2673]

The one thing that always runs through my mind watching these is how tools used to be constructed of such high quality as opposed to the junk sold today. I don't see anyone bothering to restore anything sold today 35 years from now.

[@axi0matic]

These look like professional tools though, designed for a hard life, day in day out - all metal, with simple, utilitarian styling. They're not the typical £25 Black and Decker from Argos.

[@rzerizrz]

@@axi0matic also cuz today Why should i bother with repairing junk, when for the same amount of money put into replacement parts, i cant get brand new tool? And without work :) :)

[@jedidaddychris]

This was one of those superb quality restoration videos when I get to the end and unconsciously say "ah, very nice" out loud.

[@markharris5771]

Another great restoration, this is becoming a 'must watch' channel.

[@gear_show]

Wow I am so happy to see your comment.

[@hectorlao8604]

Master restorer! And i like your workshop cuz it's clean and the tools and equipments are well-arranged

[@itself227]

You are the best at removing fasteners without damaging them. Great video.

[@Nickword1]

Imagine having all these new restored old tools this guy has been repairing for months? id be able to do any project i wanted! lol

[@jedidaddychris]

Or sell them for mucho dinero

[@getyourkicksagain]

Ahh. Beautiful restoration. And the water was very well mixed, such a uniform color and consistency! I honestly could not see any unmixed hydrogen or oxygen 😂

[@AJRestoration]

Small tip, With the bolts or anything that has thread, use a paste called copper slip, or copper grease, Its the best for anti seize.

[@AJRestoration]

its like they say, "If it’s meant to move, grease (bearings etc). If it’s not meant to move, copperslip."

[@tristantorres9235]

The snaps of the screws was so satisfying

[@tomlee7966]

another great job! love to see these old tools come back to life

[@bronxcheer031]

Oh that satisfying * snap * when a locked-in screw finally releases!

[@yyfreak1637]

I thought the same thing 😂 stripped screws make me want to die

[@jedidaddychris]

Mmm yes. I cringed until each popped...then the fourth one went, "meh".

[@xl000]

@@jedidaddychris just listen to a dry wall screw being driven into wood... It makes that sound ever time the screw overcomes the static friction

[@HepauDK]

Unless the * snap * is the sound of the head seperating from the thread, then it's an outright nightmare.

[@barthanes1]

This looked like your most ambitious project yet. Great work.

[@adylbek352]

У тебя золотые руки!!!

[@defender_of_wonder]

Brilliant craftsmanship! Great video!👍🏻❤️😊🛠

[@psedach]

Amazing. Better than new.

[@user-ib7qr7gg6t]

запас прочности у старого инструмента - на века

[@user-hu5lc7ts5k]

Согласен, этот миксер будет ещё работать очень долго

[@andreykldjian]

Beautifully restored. Well done.

[@brahimworld1829]

Very satisfying to watch, great work!

[@blasalmodovar1148]

Autentico, un experto.

[@veraluciafaria8968]

FICOU MUITO LINDO PARABÉNS

[@elysotna79]

Muy bonito quedó

[@jrand2631]

Great job! 👍👍👍

[@sparesorrepair9118]

Very nice, I like how you painted it in the Hitachi colours to match your other tool restorations

[@claudiomoreto4562]

SHOW DE BOLA !!👏👏👏👏

[@sfcarp9418]

Well done ! Excellent restoration ! 👍

[@ludoviclebreton1217]

Well Done ! Bravo

[@tonoalvarado1436]

¡Excelente...!👍👍👍👍

[@yeagerxp]

It's ALIVE!!!!! LOL. Very good restoration 👍👍👍

[@user-bt9he1qt3k]

Beautiful

[@m60mgman]

Great job!

[@humayunsheriff8208]

Really awesome mechanic u r . I'm leaning very useful to you. Thanks teacher........

[@mftmachining]

top-job.....excellent

[@julio27706]

Parabéns 👏 bom trabalho

[@TRGRESTORATIONS]

Nice one, looks brand new! 😎

[@eslam6688]

since you like this kind of work, have you considered doing the same with vehicles? i think it's not about money mainly but it's more profitable

[@alexalexx6469]

SUPER !

[@jayk1464]

Wow, I think this is one of the most challenging work in your channel. Great!!

[@user-nv7nu9wn2e]

Good .Good .Good .👍

[@saidbensghir6284]

Good job 👏👏

[@geraldspratley4637]

Very nice job!

[@zoisbasis7791]

Excellent 💯💯💯work👏👏👏

[@deltanovember1672]

Very nice.

[@peterright5464]

Well done chief

[@jmyyer]

Try this kind of electric cord: H07RN-F, you'll see immediately the difference compared to regular cords, much easier to move and manage

[@gear_show]

Thank you for your suggestion!

[@COOKWOW]

Better than new

[@nurmadinata8436]

Good job mr

[@kitsurubami]

beautiful

[@Khanji743]

Very nice...

[@hayoubfark2321]

Verry good réparation 👏👏👍👍 succès très bon travaille100/100

[@eddimorra2151]

Top Job

[@iyusrusmana9845]

Mantap djiwa Lanjutkan 👍

[@deseral]

Good job

[@ianvicedomini2648]

Great restoration of a quality tool there. Superb video mate

[@AlexAlexOmsk]

Красота!

[@AlphaMachina]

Haha, love your wall of hammers. That's epic.

[@IR-nq4qv]

Just the cleaning part alone, I found was satisfying, good job on the restoration. I would have liked to see the motor rewound, but with new brushes and bearings, its seems to be working fine. Very presentable, you added a few years life back into that old drill. Well done.

[@gordbaker896]

Rewind a motor??? I don't think so....

[@simply13able]

bravo gear show

[@romualdgor3910]

Молодец !!! КЛАСС ! :-)

[@blackobsidian2618]

... perfect job everytime 👍

[@gear_show]

Thank you!

[@blackobsidian2618]

@@gear_show your welcome

[@robertonicolosipiva2646]

Muito bonito

[@brendonsill1461]

Finally, something to beat my egg whites with!

[@AZone-xn3mj]

Good work 🤙🏻

[@gear_show]

Thank you!

[@restorationtothemax7669]

nice

[@thetiem2145]

Toàn hitachi đẹp wa

[@marekj.c8289]

Exelent job. :)

[@gear_show]

Thank you!

[@saharut4513]

Nice !

[@gear_show]

Thanks!

[@chandarussell]

Well done. Now you should work on that orange expandable wrench of yours. It’s getting rusty too. 😉

[@fatehlaib3076]

Good job men

[@gear_show]

Thanks!

[@mahdidz9354]

bon travail 👍👍👍

[@gear_show]

Merci beaucoup!

[@mazinalhadi]

How I enjoyed watching the careful and professional work. Done well

[@user-cj9mj9qr8l]

👍👍

[@InventorChannel2023]

India 🤩🤩

[@jasonhull2163]

Wonderful work. If that mixer ever binded up, it would rip off your arm sockets. They don't make tools like this anymore.

[@gayle525]

Try dawn dishwashing soap. It cuts grease and oil better than laundry soap.

[@truongngo3418]

👌 good

[@gear_show]

Thanks!

[@user-dx6pt9oo6h]

Hi bro 👋👋👋 very good restoration mixer drill 👍👍👍👍

[@gear_show]

Thank you!

[@gchavsg1905]

Excelente trabajo amigo ,gran canal !! Saludos 👍

[@oanHoangDung]

Good video bro!!

[@gear_show]

Thank you bro!

[@yeyeyeye8342]

now thats a drill that been given some fuckin hot suppers lemme tell ya absolute workhorse

[@galimalaiac6676]

What's the attachment you're using on the angle grinder? Looks like you're cleaning, sanding and polishing in one pass !

[@alekseysurname]

👍👍👍

[@TheGaao]

편안~

[@James-lo5ne]

very enjoyable, I can't wait to visit japan and check out these recycle shops next september. Would you ever do a video on how to select old tools for restoration, Are there things to avoid when looking at them?

[@carguy1717]

James Moore if it works don’t buy it 😂

[@timehunter9467]

I imagined myself with this hooked up to a car battery, using it as a prop for an inflatable boat...

[@kasimmostafa1204]

same here, but i imagined it with a kayak

[@leviwoodring6101]

Should do a challenge build. No power tools or specialty tools.

[@user-lb5pl7ev4r]

Excellent work... I notice that what is being manufactured in Japan can be repaired and renovated, unlike Chinese products You can't fix it if she stops working.

[@ahmeterdemir9097]

Great video as usual, what grease are you using for the gears?

[@cristianore6169]

This is my job every day,we need love,patience and parts, we have the same technics , Nice job saludos de Perú.

[@dxcc213]

The gearbox is almost new.

[@gear_show]

Yes it is.

[@kenmahendra2076]

0:52 you have to restore it too

[@farouq1983]

02:13 Bloody hell! I thought the goddamn predator was behind my back!

[@blackknightcustom]

LOL I thought that also!

[@farouq1983]

@@blackknightcustom So I wasn't the only one to get a damn scare lol

[@songnuoccamau6791]

Việt Nam like

[@Godzilla2k69]

Who in Hell does your camera work ? It changes the videos from pretty darn good to A+ Excellent

[@EddieMcgilvray]

Looks like you need to do a video on your rusty shifting wrench anyone notice that

[@emilionavarrete9530]

I think Japaneses can only make perfect things.

[@yves3560]

I´d redone the collector at least. Nice job anyway.

[@hardyanpajero69]

👍👍😎☕🍩

[@KenshinUshiroda]

Use a press when installing bearings, you savage.

[@kimchi2780]

Presses ha! Hammer fixes everything!

[@FuglyFatt]

If anyone needs a shop press, it is a guy like this. Yet, I'm still seeing him hammer in bearings like a caveman. The worst part is he has all the right pullers to take them out but uses a giant mallet to bash them back in. I'm telling you, bro, DO A HYDRAULIC SHOP PRESS AS A RESTORATION VIDEO.

[@FuglyFatt]

I didn't know they had power tools on the Titanic.

[@rzerizrz]

i just wonder why we never see you, using the tools you already restored.... the mounted drill, grinder or anything

[@Charlie6969]

He might have them displayed in a home museum