Electrical substation; Process of bus transfer / Electrical Power generation to distribution

[@gauravpatel561]

KZbin ka sbse axa video substation ke liye👍👍👍👍👍

[@prasantkumarverma7523]

Your videos are simply awesome bro!

[@mahaveerjain4412]

Your videos are simple n informative.. thanks n keep it up.waiting for more videos

[@SushSuryawanshi]

Awesome video with very well explained sir, Agar is tarahse college mai padh pate, to aaj IES jarur hote... Thanks a tonn..🙏🙏

[@purujitchakravorty3554]

Very well explained.

[@DOOG001]

Thanks for this series 😊 Aap es series me capacitor bank ka bhi viedo bana k upload kigiye🙏🙏

[@prabhatkerketta2194]

Superb video sir. Thank you very much

[@ashutoshkaiwart279]

Awesome knowledge sir

[@jackbhatt9402]

Mja a gya sir ❤️❤️

[@MUKESHKUMAR-od1wy]

Super 👍🏻

[@RKCONCEPTCLASSES]

Nice video sir👍

[@irapashunnur8237]

I am watching your Electrical substation series. It’s really very good and thanks to you for that. Wanted to ask you that on Aux Bus, can we close the isolator without CB ? There will be large arcing when we close the isolator ?

[@Rajeshkumar-cz9uq]

Good video and use full

[@gurudevkumar3241]

Very nice vedio thanks sir

[@Aarumasram]

😊

[@shaharukhtyagi4179]

Super super super 👏

[@sudheermane]

Excellent concepts sir I am searching lot of KZbin videos but no one shares this kind of depth knowledge I would like to thank you and appreciate your hard work sir . can you tell me the software name which you used in this video for explanation

[@pixie502]

saurabh ji all correct only probl;em is that the aux bus is only used for maintenance of one circuit breaker without disturbing load and its protection will remain available through auxiliary bus coupler .and it is not possible to transfer alll loads to auxiliary BUS as as per logic only one transfer DS can be closed on auxiliary BUS

[@pratibhagupta5276]

400 kv grid substation me hard coupling kerna safe hai ya nhi, pls elaborate

[@garimachaudhary8294]

Nice, thanks

[@Pencilart435]

Please also upload single line diagram of this system as like you uploaded for 1 and half breaker bus scheme.

[@kailash.kumarpandit3416]

Nice sir jee

[@tanz03124]

Can you pls share video from transmission upto distribution level mentioning all necessary equipments

[@deepalidevpareek9508]

Thanks sir ji

[@timewaste4642]

Thanks a lot for this video. If possible please let me know the software that you use to draw this layout. TIA

[@ShalimarKhan-n8w]

Change over karne k baad, jis bus ko hamne free kiya uske PT fuse ko hum kyo nikalte he? before opening of bus-coupler

[@irapashunnur8237]

Pl also share the SLD for the above system. Thanks.

[@usmaniftikhar4711]

Sir can u plz tell me why we use buses in distribution system

[@MAHESHKUMAR-ec5ny]

Sr agr buscoupler open hoga...to chang over kyo ni kr skte...i m not sure abouth it..sr plzz btay

[@sourabhsharmahindichannel3000]

Dono bus ek potential pr nahi hogi or jis line ko change over karege us line me heavy sparking hogi circuit breaker pr

[@simplenima4060]

Dear Sir Please record a video for R.V.T .it will be great

[@PurnanandSuyal]

Sir kya aap relay wala kam bhi samjha sakte ho

[@Laltu-g4q]

3D animation kaise bnaye ?

[@manishchaurasia692]

SIR is model ka file mil skti hai kya jo computer me 3d me dekh sakte hai

[@amanmehta2100]

How much arcing produced during line isolater sift to another bus .is it dangerous please explain

[@tejinder6329]

Sir plz ek video scada system pe ..plzzz sir

[@rajvaghadiya8814]

Which software is used to design the substation

[@RohanJohnDSouza]

sir which software it is?

[@sourabhsharmahindichannel3000]

Used 4 softwares for making this video 1- Adobe Photo Shop - Image Editing 2- Blender - 3D Modeling 3- Adobe After Effect - Compositing and Video Editing 4- Active Presenter - Screen Recording

[@er.jagdeepkumar9983]

Please make video on working of SF6 breaker and VCB breaker with animation.

[@shubhamroy9438]

Sir is there any case in which we keep both main buses active at same time?

[@sourabhsharmahindichannel3000]

All the main bus remain active all the time. all the outgoing lines are generally distributed on all the man buses.

[@udairegar2304]

Sir please explain ac cuf&Dc cuf

[@RKCONCEPTCLASSES]

can-we-replace-a-110-220-turns-transformer-with-10-20-turn-ratio. Then what happens ?

[@sourabhsharmahindichannel3000]

Amazing question! Turn ration is not only the parameter which is considered for selection of transformer for a particular application, other parameters are also important like; rated voltage and rated current, or rated kVA. a pocket size transformer can have same turn ratio compared to gigantic transformer installed at large power stations, but their should be a great difference in power handling capacity.

[@sukhvinderkumar2252]

Sir substation 3d k liye Kon sa software h ye

[@EasyElectraEE]

Maya

[@pradeepgiri5340]

PLEASE MAKE A VIDEO ON SCADA . ITS URGENT

[@wasimjahangir9652]

Mr surabh ji namaskar Mera ek question hai. Kya phase line me aane wali sine wave ko ham ek dusre ke saamne kar sakte hai. Kya yeh possible hai.

[@sourabhsharmahindichannel3000]

Maaf kijiye me question samjha nahi. Per ek bus pr jitni bhi line connect hoti hai sabhi same phase me hona chiye

[@hiteshvasava1795]

👍⚡

[@sandipsandal]

bus baar me 2conductor ko ek ct ke o/p se kyon connect karte h means bus bar me 2 conductor wire kyon hote h

[@sourabhsharmahindichannel3000]

Mote wire ko cut karna, bend karna muskil hota hai is liye ek mota wire ki jagah 2 patle wire use karte hai. kyuki conductor ka crossection area is per depend karta hai ki hame kina current carry karna hai

[@sandipsandal]

@@sourabhsharmahindichannel3000 THANK u sir for answering me

[@hasanmusanadaf9686]

During transfer condition what about load condition.

[@sourabhsharmahindichannel3000]

Must be light load condition

[@hasanmusanadaf9686]

@@sourabhsharmahindichannel3000 one more thing, 2 main bus bar and 2main line a can be coupled with bus coupler?

[@NikhilKumar-dq5xp]

Sir this type of bus system is called as..........?

[@sourabhsharmahindichannel3000]

At 220 KV side it is Double Main Bus Auxiliary bus arrangement and at 132 kv side it is one main and one auxiliary bus arrangement.

[@rahulahirwar7329]

Bhai thode samaye ke liye kisi v line ko bina protection ke kaise shift kr sakte ho......Bus coupler se kewal kisi 1 line ko hi connect krte he taki fault ki condition me bus coupler ka circuit breaker off ho sake.

[@sourabhsharmahindichannel3000]

Bus coupler to bus ko couple karta hai, us se direct kisi line ko to connet nahi kara jata

[@rahulahirwar7329]

@@sourabhsharmahindichannel3000 bhai bus ko connect krne ke liye bus tie ka use krte he.....Or bus coupler ka use tab krte he jab koi feeder ka breaker kharab ho jaye....

[@vipinkumar-rp9tx]

CVT Kya hai, iska bhi video Dale

[@udairegar2304]

Sir iss tarah ka 3d drawing mil dkta he

[@vinaydrm9953]

400kv substation k upar video banaye

[@aussieboy77]

Any chance you can do an English translation for this video?

[@GulshanKumar-kb5gi]

Mere dear sir , apse request hai ki , 11 kv relay panne (feedar) pr koi video banayen, please sir

[@sourabhsharmahindichannel3000]

Thoda samay lagega pr jaroor banaayege

[@deepakbhatt7885]

Boss main bus 2 ko charge Karene ke liye isolator on condition me close Kara hai, aur main bus 1 ko maintainance plan ke liye isolator ko on condition me open Kara hai.isolator kis condition me open close kar sakte hai without dangours plz make a video for helpful

[@sourabhsharmahindichannel3000]

Bus 1 ka maintenance karna hai to to sari connected lines ko bus 2 pr shift karna hoga. During shifting isolator on rehna chaiye or jab sari lines bus 2 pr shift ho jaye tab isolator ko open kar sakte hain.

[@deepakbhatt7885]

But isolator is off load device hai yaha load both bus me flow ho Raha hai.

[@haseebali9591]

Which software do you use for presentation...??

[@sanawazhaque7866]

Apne ne jo AutoCAD se design banya hai is design ko banane ko lekar video banao please.

[@sourabhsharmahindichannel3000]

Ye autocad nahi hai, Ye Maya software hai or maya ke 3d modeling ke bhout sare videos available hai youtube pr, In future shayad me banau

[@sanawazhaque7866]

Thanks for the information.

[@sanawazhaque7866]

I will wait for your Maya software tutorial.

[@himanshu5948]

This video has confused me thoroughly. How can u ever operate an isolator on load? This is the basis of your changeover of buses. Please share SLD for better explaination.

[@shaharukhtyagi4179]

Bas aap ki video me awaj Kam hai please is Ka samadhan Karo 👍