FREE ENERGY WHEEL ~ Using Ring Magnets ~ EXPOSED!

[@electronicsNmore]

***ATTENTION: The bearings used for this project are BETTER than the bearings shown in the scam videos. My wheel and upper magnets move SMOOTHER than the scam videos on YT. It doesn't matter how smooth, because the wheel will never continue to spin all on it's own. Please click the link below to see my Video Playlists. Thanks! bit.ly/2kEDBXD **For GREAT deals(Usually cheaper than EBAY) on neodymium magnets, Fidget Spinners, electronics, drones, automotive tools, household items, phone accessories, locksmith tools, & much more, please visit the link below and SAVE IT AS A BOOKMARK on your computer or smartphone to Banggood for future purchases. (Your purchase supports my channel!) All Items: bit.ly/2cgYr14 Flash Deals: bit.ly/2cb6CZB **Try these money saving coupon codes: BGAFF7 or affiliate6 or elec or measure or HDWARE2 or WELDTOOL** or ask if other codes are available! Thanks For Watching!

[@arakwar]

It can't works, since this model is clearly a scam. We can see that no effort have been put on the "stabilisation problem" of a full-magnetic dynamo. As soon as your system magnetif fields can find a stable spot to sit in, it will stop working. What I'm trying to figure out is a model that would induce a cycle in the system, where that stable state will be broke so the rotor is pushed to continue on spinning, and where that "break" requires far less energy to create than what the dynamo will produce... I wondoer if you encoundered a design that would be close to achieve this...

[@aufzurwahrheit]

and still comment this ,how much time and energy you puttin in here. its so obviously... so sir ... just one question ? is free energy possible ? is it suppressed by oil and energy companys ?

[@nigelmarlow8939]

electronicsNmore

[@iSimplySunday]

electronicsNmore it seems that the magnet plate is slanted down in the other video. Possible that gravity will help it to spin?

[@dingleburry7919]

the plate in the other video passes 3 or 4 magnets per rotation of the magnet up top. if you gunna "expose" something at least replicate it properly.

[@electronicsNmore]

@Deborah Anne DeMarco Very simple reason. I used ceramic magnets because that is exactly what the scam artist used, and that is exactly what I had access to. You would buy 13 neodymium rings magnets for $75.00 each for a scam? Thanks For watching

[@Frank-ue6eg]

Finally, a person with the brains and courage to call out fake claims on the internet. Thank you - you have loads of potential subject matter to debunk.

[@electronicsNmore]

Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You Other great videos: kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/bqPNXpijiLqZbas kzbin.info/www/bejne/ZqPTkoKnfL5kbq8 kzbin.info/www/bejne/f5u0ppKef9tqi7c

[@mrbrucewayne631]

sure! you guys are geniuses. But I have done these experiments and you can get it to work....but the key is in taking care to get just the right size and distances correct. And that result pruduces very little torque, but it is enough to get it going in the same way that magnets can light a bulb with, again, just the right set up, sizes and distances......also a lifter can be made using high voltage and very careful adjustments to distance and sizes. The only thing you have proven is how much work you went thru to try and disprove something that someone else actually figured out how to make work

[@Frank-ue6eg]

Thanks for the heads up, Bruce. So I guess this guy is yet another KZbin media mogul billionaire racking up revenues by producing evil content geared to do nothing but make himself money. I've unsubscribed and will avoid - not interested in making these people even richer. Besides, his content now features ads for Trump and the GOP - so shame on his scam.

[@mattsadventureswithart5764]

@@mrbrucewayne631 Video. Or it didn't happen. Prove it. Engineers tend to be science minded and will change our minds with proof. Show your *entire* setup. Show the build process. If you can make it work and give proofs, you'll be richer than anyone by licencing the tech... If you can't prove it, with full build shown, then it didn't work. It really is that simple

[@lapisdust]

Sure, Bruce.

[@prakashjugwunth1750]

Thank you for taking the time to expose those pranksters. Such types are too numerous in KZbin. Any presentation that looks too good to be true or has the word 'secret' in its title should always be taken with a pinch of salt.

[@kelennaanyanwu5372]

Wow, am impressed you took the time to analyze the other video and experiment various possible combinations. That is a scientific approach. Love the video

[@electronicsNmore]

Glad you enjoyed it! Please be sure to share the video link with others, and look over my extensive video playlists as well. Thank you

[@stuartoag8159]

If all. The magnets on the wheel are facing up on the same polarity . But the other one set to repel it , it is then set to constantly repel the wheel , or am I missing something

[@stuartoag8159]

You went wrong by putting every third one to attract , thus slow ING the wheel instead of constant repelation

[@bholman7699]

Great video. As a former R&D Engineer, I appreciate the effort you put in making this.

[@electronicsNmore]

Thanks Bill! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/bqPNXpijiLqZbas kzbin.info/www/bejne/ZqPTkoKnfL5kbq8 kzbin.info/www/bejne/f5u0ppKef9tqi7c kzbin.info/www/bejne/e6PThGp5acyIjKM

[@briantunzi2462]

An We Al can do so much more !

[@fr33kSh0w2012]

Yeah, I agree.

[@subductionzone]

Of course it doesn't work. You forgot to include the hidden motor.

[@SayNOtoGreens]

... and a battery to drive it!

[@drnanook.3212]

+SayNOtoGreepns

[@earthclad6833]

+subductionzone 좋은 말 동생

[@rogerd4559]

I think it only works in the country of its origin. the gravity and earths field id different around the pyramids

[@bruceshand8052]

@William Buffington Of course not.

[@alexandermacrae9397]

Thank you. Honest people are very rare these days. You did a valuable public service.

[@electronicsNmore]

Be sure to share my channel with all your friends, and check out my latest video!

[@davidsvarrer8942]

And earned some 4 million views as well. All of these plus the 4 million views of the scam videos are wasted minutes. So, 4 + 4 = 8 million views x 10 minutes = 80 million minutes, or, above 1 million hours wasted. This resembles some 600 man years of time gone down the drain due to the scammer and due to the good person here, trying to teach people a lesson. Well. In 600 man years, if these 1 million hours were spent well, and supplies were available, one can - comfortably - plant some 60 million trees (1 seedling per minute = 60 seedlings per hour)..

[@stevenmmays]

alexander macrae there's a lot of honest people just not very many that make these magnet motors

[@jayeshwaghela9509]

Jitesh

[@LEORofYAHWEH]

@@davidsvarrer8942 sir, you are incorrect, this vid is not a waste unless you missed the "exposed" in the title. did exactly what it said and informed otherwise ignorant people. so save yourself the time... why did you even come here if you already knew the info.

[@KipIngram]

THANK. YOU. I have tried to explain to people numerous times online that these things will not work - the claimed behavior violates the most basic principles of physics. All I get for my trouble is attacked - at the very least of being closed minded, at worst of being in the pocket of the energy utilities. It's definitely nice to see that there is someone else out there that "gets it." Great job!

[@electronicsNmore]

You're welcome! I have better "Free Energy" scam exposing videos than this one, so be sure to check out the link below and share. Thanks kzbin.info/www/bejne/fJ7GeZJsbr6SkLs

[@markhill485]

People have been taught physics in a box. Think outside the box. I can’t speak for this video, but Amazon sells small magnetic motors as educational experiments. Magnets installed at a specific angle will give you the maximum amount of push/pull effect to increase horse power. The power cartel in the US will not allow any company to commercialize these motors. Think about it, if adding power to a coil in a motor creates a magnetic field and turns a motor armature, then replacing that coil with a magnet will also turn that Armature.

[@KipIngram]

@@markhill485 The problem, Mark, is that while there do exist configurations of magnets ideally situated to give you an "energy production stroke," that stroke eventually comes to and end - there is a stable potential energy minimum and the apparatus will eventually reach equilibrium there. And once that happens you have to *use* energy to move the apparatus back to the position in which it's ready to give you another energy stroke. This is a no win situation - even completely neglecting losses, it requires just as much energy to restore that energy-laden configuration as you get out of by allowing the system to move out of it. You get energy while "the rock rolls downhill" - then you must supply the same amount of energy back to get it back uphill again. And honoring losses, you don't just come out even - you lose. No one expects that rock to roll back uphill somehow, or for the water that falls through a dam to somehow find its way back behind the dam again (at least not without being evaporated by the sun first). But talk about magnets instead, and people lose their common sense. It's an entirely similar situation - there *is no free energy* and there's simply no way around that. I'm sorry. I really am - I'd love to have such technology too. The bottom line, universally applicable rule in all situations of this type is "there is no shortcut uphill." You can't get up the hill without investing the energy. The type of physics involved makes no difference. In the specific case you mention in your reply, the difference between using a coil and using a magnet is that you can alter the amount of current in the coil, and therefore modulate the amount of force. You can turn the current on when it's time for the thing to make a power stroke, and then turn it off when it's time for you to return the system to its original position. THAT lets you do the position restore without investing that energy. However, changing the current in the coil requires electrical work. What you've done is replaced the need for applying mechanical energy with the need for applying electrical energy. You're CONVERTING energy between electrical and mechanical forms - you're not extracting energy from nothing. That's what "just thinking about it" should lead someone to conclude. By all means - buy the gadget on Amazon and play with it. It's a free country - nothing is stopping you. But you're not going to find success in this endeavor. You may learn a great many things, though, and that is always a good thing.

[@derekyoung9951]

Thanks for saving use time. Plus to realize how many low people get a kick out of wasting our time. I appreciate what you have done .

[@electronicsNmore]

Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/bqPNXpijiLqZbas kzbin.info/www/bejne/jZ68h3mmqLyZeMU kzbin.info/www/bejne/f5u0ppKef9tqi7c

[@brinhaerycammel3467]

I've watched the video you referenced for your build, when I commented about the metal shroud hiding something the "inventor" got real pissed at me, made my day in fact. Funny thing, when you look up "inventor" in the Dictionary it never mentions "Scammers"

[@SweetSpotGuitar]

I clicked on this vid from your channel, thinking that you might be into the Free Energy thing, and I'm so glad that you're debunking this Troll-Science-level nonsense.

[@electronicsNmore]

Another great YT scam exposed: kzbin.info/www/bejne/fJ7GeZJsbr6SkLs Also be sure to check out my bike generator video below and share. Thanks! kzbin.info/www/bejne/bqPNXpijiLqZbas

[@BatMan-qg6yt]

Except for Batman, he uses free energy and obviously Superman.

[@justchecking905]

It's great to see someone who will take the time to debunk crap like this! Thanks.

[@electronicsNmore]

Glad you enjoyed and appreciated the video! Please share. Thanks

[@FrankGraffagnino]

i like the idea of a magnetically coupled gear set... just goes to show, you can learn and get new ideas even from scam videos!

[@vinayakmandrekar7938]

Frank Graffagnino right !! agree

[@AkaMrJay]

Frank Graffagnino I had the same thought :D Magnetic gears, No friction no heat ;)

[@DarkAvatar1313]

AkaMrJay There would still be heat and there would still be stressed points where the magnets are mounted.

[@vinayakmandrekar7938]

nothing touche !! Ideas can be crazy and may not yield expected result and may :)

[@neilmanning584]

DarkAvatar1313 Also there would be a current generated in the magnets due to magnetic flux which would also create more heat loss!

[@tonyshaw7389]

I also enjoyed you correcting the fact that people are out there hoping people to the point of making them look like fools it is comforting to know that there’s someone like you out there to help out the rest of us

[@electronicsNmore]

Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You

[@nikhilpanwar2623]

@@electronicsNmore brother you work can be corrected by arranging all the wheel magnets in a same pole manner and the pair of rotating magnets should be in one South and one North pole manner and this will work definitely

[@citizen1970]

Thank you for taking the time to expose these scammers well done. Robert

[@electronicsNmore]

Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/bqPNXpijiLqZbas kzbin.info/www/bejne/ZqPTkoKnfL5kbq8 kzbin.info/www/bejne/f5u0ppKef9tqi7c

[@rogerd4559]

these debunkers work for the government What if these devices actually work and the government is proving them wrong to save the oil industry from collapsing?

[@JerKur18]

The shaft is extremely smooth. Lubed up real nice.

[@awakenedspirit3686]

Inyourendo

[@brandon9271]

if you spin in backwards a say "Rumpelstiltskin" it will turn straw into gold.

[@quantumleap359]

+brandon9271 Finally! A ray of truth!!! LOL!

[@ravirumplestiltskin598]

+brandon9271 Still won't work. I happen to know!

[@DJW1959Aus]

+brandon9271 Or perhaps gold into straw.

[@MrWadsox]

+brandon9271 I think you have to say: "I buried Paul" while spinning it backward.

[@quantumleap359]

Green Genes LOL good one!

[@davidmiracle398]

Your explanation of this scam is very concise and well organized. Thank you for going to all the time and trouble to expertly explain how the scam was perpetuated.

[@electronicsNmore]

Glad you enjoyed the video! Be sure to check out my other videos, especially the 2 below, rate thumbs and share. Thanks kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/bqPNXpijiLqZbas

[@briantunzi2462]

We Do Have things that Will an do work very well !

[@chuckbelliveau2543]

It’s a shame people got to do shit like that on the shows because you know people are really trying to learn something and you’re always going to have an asshole out there it’s just a real shame that people do things like this thanks for exposing that it was greatly appreciated again great video love the way you explain things in detail where anybody could really understand this thank you

[@TheZooman22]

Nice work. You can prove that magnetism is actually a form of "energy" and it is in fact perpetual, but with a mechanical device energy is always dissipated, and entropy will always beat you up. There are proven devices such as Tom Bearden's MEG , which produce electrical energy without relative motion.

[@surefiremushroomsmicrogreens]

I hear all this talk about it won’t create enough energy to be efficient.... lol we don’t care about efficiency we can about function, when you can function you can improve on efficiency 😂 if it charges your 12 battery system and doesn’t use another power source with minimal moving parts then you have something worthy of charging your phone, led strips even if it only spins 24 hours and I have to give it a push it’s still free what did it cost me to spin it by hand to get it to run another 24 hr cycle except my own physical energy 🤷‍♂️

[@uncannyvalley2350]

Seems like it could have a number of potential applications, it could help improve energy production in turbines, or you could use superconductors and low Temps to create zero friction. 8 had this idea using just 3 magnets back in 2005, using 2 positives and one negative, that's why I looked this up

[@ananthropomorphictalkinggo6641]

@@uncannyvalley2350 and how much power does it take to continuously cool something to superconducting temperature?

[@the_undead]

@@ananthropomorphictalkinggo6641 too much to make this kind of a set up worthwhile

[@ananthropomorphictalkinggo6641]

@@the_undead exactly.

[@WilliamWHaywood]

So glad to hear that the laws of physics hold true. Dear old entropy keeps throwing a hammer in the best laid plans.

[@christopherfrost9614]

Yes the laws of physics such as the basic law that perpetual motion is physically impossible and the scammers playing on the part of the human mind that really wants what is'nt possible to actually be possible . So energy is'nt either created nor destroyed just changed forms so it takes another form of energy(mechanical) to produce(convert) to electricity. The only "free" energy I'm aware of is absorbing electricity that surrounds high tension electrical lines and transformers but They will bust You for stealing that and the sun which at least presently nobody is charging any fees for . I suppose that will come about same time as when air starts costing money.

[@justmefolks1863]

Glad I ran across your video, now I can watch the rest of them. We lose power a lot in the winter so trying to come up with something I can use to keep us at least some power.... being broke sucks...LOL. Thank you for helping others to not waste their money.

[@joshnabours9102]

A battery backup + inverter would be the cheapest and easiest way. You can use wall chargers to charge the batteries and connect the inverter to your heater, a fridge and some lights at minimum to stay comfy through the outage. Used car batteries are a cheap way to make a battery bank. Lithium iron phosphate batteries are a better, but more expensive alternative. Just make sure the chargers you charge the batteries with are designed for whatever chemistry you pick. You would need enough batteries for the average time your outages are too.

[@theskyhunter7901]

Well done. Well presented, clear and concise. Keep up the good work.

[@whiterabbit7224]

What you have made could be used as a gearbox with no metal to metal contact. No wear and tear or lubricant needed...

[@TimothyMichaels]

You forgot to plug it in. 😏

[@danielleking3024]

You a nut!

[@margareteast5670]

Tim Michaels 😂

[@ProdxLooneyManSlayedIt]

😭😭😭😭😭 I’m cryin!

[@OzzieWozzieOriginal]

kkk, he is being funny

[@DuctTapedGoat]

Its the truth though. The lower magnet installation should be on generator motor, powering an electromagnet to preserve the polarity of the larger wheel, and the energy also should be powering a drive motor and electromagnet on the upper magnet. If you use "loose" magnets that are not electromagnets, the polarity will settle and freeze the installation, as the passing magnet changes the polarity if it not preserved by an electromagnet. Ultimately, there is 1 peak RPM that could drive this system to generate the highest amount of power, and more or less RPM would be inefficient. Essentially it is a "Digital Gearing System", with friction free cogs, and even if 100% energy was reused to power the motor and electromagnet this design is AT LEAST an electronic perpetual motion machine and at best, could power a lightbulb wirelessly. Please, try harder. Because without electromagnets you arent doing a debunking service. All free energy "Digital Gearing Systems" must be wired with electromagnets and hand cranked to optimal RPM to actually benefit the results of the quest for perpetual motion engines and electrical systems. If you do more tests on the device you made and tested the polarity of each magnet you will find the polarity to be continually reversed when the magnets are left stationary or when passing over other magnets beyond 1 full rotation. This changes the polarity - considering each lower magnet should be alternating polarity, futher tests will expose that you have failed to engage the driven gear, which is the upper magnet that would be powered by the lower gear system.

[@Trident023]

And here we can see the first law of thermodynamics in its natural habitat, aka the real world! ;)

[@thatdude3977]

The solar system would like a word with you.

[@mike80411]

Thank you for sharing this video. You did a great job explaining the project. Thank you for exposing the scammers. Do not see no need for people to do a evil deed as scamming people.

[@electronicsNmore]

mike80411 Glad you enjoyed my video! Be sure to share my channel with others, rate thumbs up, and check out my video playlists. Thanks

[@jeremytravis360]

I always laugh when people post stuff implying perpetual motion. Most people know it does not exist. Thank you for clarifying this basic fact of physics.

[@electronicsNmore]

Thanks for watching Jeremy! Be sure to look over my "Free Energy" scam exposing video playlist below for many other entertaining "Free Energy" videos. kzbin.info/www/bejne/fJ7GeZJsbr6SkLs

[@mattwaters9008]

why couldny it be possible? A magnet us unlimited magnetic energy and if magnetic fields relate with electric fields then why would it be impossible to get unlimited electrical energy from it?

[@jeremytravis360]

@@mattwaters9008 Because there is no such thing as perpetual motion.

[@mattwaters9008]

@@jeremytravis360 Your answer doesnt answer anything. Magnets produce a perpetual magnetic field without any energetic input. Magnetic fields induce electric fields and vice versa. Therefore it makes logical sense there exists a way to harness unlimited electrical energy from magnets because magnets provide unlimited magnetic fields. Can anyone explain to me why it is absolutely impossible for there to exist a way to get unlimited electricity from magnets somehow?

[@thatdude3977]

@@jeremytravis360 the solar system would like to speak to you

[@robertdouville74]

Good, video, true scientists are skeptics, you have a scientific mind. Congratulations for your objectivity and inventiveness!

[@electronicsNmore]

Glad you enjoyed the video! Be sure to look over my extensive video playlists below for many other videos of interest to you, and share my channel with many others. Thank you kzbin.infoplaylists

[@charleyzabarinsky4257]

Here I am watching this video in March, 2019. Timeless information. Very enjoyable. Thank you.

[@electronicsNmore]

Glad you enjoyed the video Charley! Be sure to watch my other great "Free Energy" scam exposing videos below, rate thumbs up, subscribe, and share my channel with many others. Thank you! kzbin.info/www/bejne/bnjOiZ9uoqapf7M kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/a53Zd4aHZ8Rnqsk kzbin.info/www/bejne/eITHhHechLyVhNU

[@acidnidirbyh1105]

Nothing is free, The parts generally cost money and "Time is Money" but it is really awesome that people try to find useful ways to re-purpose previously used stuff instead of letting it kill the land :) Great Job, keep it up :)

[@electronicsNmore]

Please be sure to check out my extensive video playlists and most importantly share. Thanks!

[@charleyzabarinsky4257]

Hey, maybe we are related.

[@bzakie2]

A lot of trouble to go to knowing it’s not going to work.

[@vijaybhat7619]

You have done a great job for the fools like me who spend their precious time seeing these nonsense bogus free energy videos on utube nothing is free

[@riloariichoariicho884]

That's great you exposed those fools who are fooling the fools.why would they do things that cheats or fakes

[@wolfsden3]

Subscribed because I love how you called bullshit on the other vids! Great work!

[@electronicsNmore]

Great to hear! Be sure to watch my "Free Energy" scam exposing video playlist below and share. Thanks! kzbin.info/www/bejne/fJ7GeZJsbr6SkLs

[@eugenemorrill7009]

An excellent video exposing a scam. Your expose is greatly appreciated. You make it easy to understand the way the magnets interact for someone who has a hard time telling the difference between up and down..

[@electronicsNmore]

thesecret2 Sure it will spin endlessly, and you have a video that you made proving this on your channel? I thought so. More talk from people with zero proof of their claims.

[@zee339]

electronicsNmore ...was he supposed to reply in the middle of your statement?

[@electronicsNmore]

zee339 I checked his video list before posting my comment, so I was able to answer my own question. :-)

[@zee339]

electronicsNmore indeed!

[@robinsss]

electronicsNmore but I have seen a magnet powered device that works on youtubeso it is possible to keep a device moving using nothing but magnets

[@electronicsNmore]

Have you seen the device in person, and carefully inspect it? No. These supposed devices have no torque even if you could get them to spin.

[@kevinabel2370]

Gravity and magnetism share so many properties. I can see why physicists are always looking for a formula that ties the two forces. Also the strong and weak nuclear forces.

[@Dobranican]

Proof of concept is there, materials used are inefficient, airgap is extensive and drag on driver is visibly extensive but awesome job trying to replicate loved watching the video!

[@electronicsNmore]

Glad you enjoyed it. Be sure to look over my "Free Energy" scam exposing video playlist below and share. Thanks! kzbin.info/www/bejne/fJ7GeZJsbr6SkLs

[@perryfrohlich5126]

Great job! I got reeled in on a few scams myself but slowly figured out that what I was doing wasn’t making any sense. What’s the joy for a person to fill the world with such lies!??? Keep up the great work Thank you. Santa Barbara, Ca.

[@justindamirgian5977]

I dint see how we can't make this work. Sadly it's really simple in my mind I just don't have the resources to make it work

[@DcaCo123]

So True, there is just no such thing as FREE ENERGY. Thanks for sharing,

[@electronicsNmore]

Please share. Thanks!

[@thegirlsilove]

that's not what Tesla implied

[@GimmeMyHandleBack]

Solar is as close to free energy as we can get right now. And even then, the sun is nuclear powered

[@augustvonmackensen9785]

If that were an Apple product, they would claim that you are not using it right !

[@augustvonmackensen9785]

S P Absolutely !

[@JulesStoop]

"We should've taught them about physics. All of them. Now it's too late: they all have the right to vote yet too many chose to vote for perpatuated stupidity."

[@patrickmulholland1840]

HI IM AMAZED THE NICE NEAT WORK THAT WAS PUT INTO THIS DEMONSTRATION THANKYOU

[@jritchie777]

I love exposing the scams, keep up the great work!!!

[@electronicsNmore]

Great to hear. You can support my work by sharing the video link on social networking sites. Thank you!

[@markwilliams6375]

This is a honest, man, God bless.

[@plejaren1]

or a government paid one to make sure that it doesn't work in order to put people off the track.

[@silverwiskers7371]

It needs be said that the fake videos is all about the views, it a way to make a buck and most people know free energy is impossible right now, mabe in the future someone somewhere will find zero point but thats 50 or 100 years from now

[@tonyrobertson6328]

Very simple as to why it doesn't work: there is no free lunch.

[@sakethgupta2885]

My man, Mr.beast still exists in this world

[@RedDogForge]

T.A.N.S.T.A.A.F.L. one of my favorite sayings

[@SiriusSphynx]

Thanks genius

[@RobertJohnson-ec2uq]

Great Vid. One can actually learn a lot by watching a vid like this. I liked it a lot.

[@VikingOlberg-NymoenOfNorway]

Thanks mate, people like you helps other not to waste time on bullcrap👌

[@electronicsNmore]

Glad you enjoyed the video! Be sure to check out my other great videos below and share. Thanks kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/ZqPTkoKnfL5kbq8 kzbin.info/www/bejne/bqPNXpijiLqZbas kzbin.info/www/bejne/jZ68h3mmqLyZeMU

[@stevewilliams5004]

Very well done mate, good explanation, enjoyed it 😀

[@electronicsNmore]

Glad you enjoyed the video Steve! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/bqPNXpijiLqZbas kzbin.info/www/bejne/ZqPTkoKnfL5kbq8 kzbin.info/www/bejne/jZ68h3mmqLyZeMU

[@donh4750]

Finally a real person tells the truth. Thank you!

[@electronicsNmore]

Glad you enjoyed the video! Be sure to check out my extensive video playlists for other great videos of interest to you, rate thumbs up, and share my channel. 3 more great videos: kzbin.info/www/bejne/sKjHqpeOrqhgoZI kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/bqPNXpijiLqZbas Thanks for watching

[@Helpfulharry4306]

Any person/company that sells plans, but doesn’t sell completed devices, is a scammer. If you discovered how to make free energy, wouldn’t you sell complete, patented devices?

[@gavincurtis]

You did a big no no. You are using an asymmetrical block of wood as your base. Never NEVER use asymmetrical wood (in particular grooved lengthwise) on any free energy device.... unless your intent is to render it useless. Thumbed up and subscribed. Thank you for exposing these frauds.

[@yeayeahchino8898]

I'd buy that for a dollar!

[@alainlareau1733]

Do you recommend polypropylene ?

[@ekeneosuagwu6919]

Thanks for this, science vigilante. Get'em all!

[@electronicsNmore]

Other videos that you'll greatly enjoy! Please share. Thank you kzbin.info/www/bejne/fJ7GeZJsbr6SkLs

[@billyeast6819]

If this motor worked production of it would be prolific. Thanks for this video.

[@electronicsNmore]

You're welcome Billy! Be sure to share the video link with others. Thanks

[@chentepacololo5759]

Did a fantastic job. I have found myself that their are definitely FRAUDS out their. Don't understand why people's want to deceive. INSTEAD of ENLIGHTENED HIS FELLOW MAN. YOU SURE DID!! THANKS FOR SHARING

[@cuervo1003]

Honest man, thank you. Please keep it up, we need honest people in the tube, we have thousands of honest people showing how to, videos and I thank them but we always have a few that get a, I do not know what and BS the video, games for little brains. Thank you to all the people in u-tube that put good info on how to do or fix something in the car or home or special projects that someone may want to do. Thank you all, I know it has helped me many,many times, Lol. Many times😁😁😁😁

[@worldoftankblitz6743]

nice

[@edelahaye]

Thanks for the debunking. I'm tired of these fake videos ...

[@electronicsNmore]

Emmanuel Delahaye Glad you enjoyed the video. Please be sure to share my channel/videos. Thank You!

[@robbyddurham1624]

I watched thinking you were going to make a generator using wind or some other type of energy. I'm still glad I watched. Of course you have to have some kind of force to rotate one or the other. anyway, Thanks. I enjoyed it.

[@electronicsNmore]

Glad you enjoyed the video! Be sure to watch my "Free Energy" scam exposing video playlist below, and most importantly share my videos with many others. Thank you kzbin.info/www/bejne/fJ7GeZJsbr6SkLs

[@rogerd4559]

Is a solar wind machine a perpetual motion machine? I remember in my fifth grade class the teacher had one in the window which I assumed was a perpetual motion machine that worked

[@Keifer-D]

you can still use this technology to make a wind turbine with it.

[@paulvella1589]

@@Keifer-D you can give me

[@dannyandrose]

Love it when science with " Proof " busts KZbin content provided science ! Thanks for creating content showing why someone's scam is a scam . We have tried many things these content creators have created which failed grossly , so Thank You !

[@gumenski]

Have you made sure the power cable is connected securely.. ?

[@zederrickleak7103]

Thank you......... because I was so puzzled seeing that other guys video .I builder one like you have and it did not work

[@electronicsNmore]

You're welcome! I have many great "Free Energy" scam exposing videos, so be sure to look over the playlist below. Thank you kzbin.info/www/bejne/fJ7GeZJsbr6SkLs

[@100canadianmaplestirup8]

This is a pathetic design and there are much more advanced examples from 1800 let alone modern examples! Look it up- this is a shill video to hide simple fact and logical thought.

[@hogarthheathan]

@@100canadianmaplestirup8 Send a link to a decent one, I'm sure there are ones that work.

[@kona702]

Thanks for the informative video dude!!!!!!!!!!!!!!!!!!!! So.......I know you dont want to hear unqualified people commenting on issues they found with the setup. I'm not an expert and have no clue...but I will absolutely point out areas that I found kind of flawed and that I need explanation on. That is the whole point of KZbin....video formatted information on some sort of material, and the social interactive discussion regarding said material. No hard feelings dude...just my observation.That being said....the magnet that spins in the wooden housing didn't seem to spin as freely as you stated. Your plate with the ball bearing is GREAT!!! But the "oiled" axle of the free spinning magnet has a very very sufficient amount of friction, creating enough drag for me to discredit this test. I DO NOT believe in free energy...but the control was compromised with this minor oversight. Put a bearing in the wooden housing to better control the experiment and re-run it.Just my novice opinion and comment. Cheers!! Kona

[@w.patpeters4643]

I lived in Kona for close to 30 years. It was very cool..

[@mikeweber5456]

agreement

[@pauperparent8750]

guess we never got a reply on this? 2019

[@ichoppabroccoli3670]

Nice video! It's cool when just plain science wins! You put a lot of extra work into it just to prove it too! If this worked wouldn't a bunch of us be doing it to get off the unreliable grid?

[@Pete112169]

this is def. not free energy but it might make one hell of a torque converter for a honda ;)

[@1Howdy1]

It would be a gearless drivetrain, no transmission needed. Have a magnet ring in place of the ring gear of the differential. Have another magnet ring coupled to the crankshaft with a linear bearing linkage connected to the accelerator. Instead of the accelerator pedal operating engine rpms, it would control magnet spacing. The engine could have a simple air flow governor like a lawn mower - set to always maintain optimum rpm. The engine could be designed to have a very narrow power band - producing unbelievable fuel efficiency. Of course, you would run the risk of mass destruction any time driving over a manhole cover or across railroad tracks, but there would never be stray nails on the road to puncture a tire. Gears are so old fashioned and quaint.

[@d4rk0v3]

@@1Howdy1 Just put the assembly in a magnetic yoke to contain the magnetic fields.

[@airtakusa]

thanks alot for saving us from waste of our time and our money .

[@electronicsNmore]

+M Ray You're welcome! Please share my videos with others and rate thumbs up. Thanks

[@thenoobletlego]

+M Ray Was gonna say the same thing. Those God Damned Chinese hoax videos..

[@enriquecaballero5637]

subtitles in spanish please freen..¡

[@andaros2106]

Have you tried fixing the upper magnets, and starting the wheel or table spinning to see what happens? Just interested in knowing what occurs.

[@JohnDoe-pl4fn]

I have a home-made Tesla car with 7 of these on the roof! I only need to let my car go down the hill of my garage and the wind makes the thing start! Two people in my block are also having claims from the energy company for how low their bills are at the end of the month, and all thanks to this tutorial. Thank you electronicsNmore! You the man! Bring it on!

[@lupydupy1]

How ANYONE can give this demonstration a "thumbs down" shows that some idiots just can't be taught anything or worse yet, don't WANT to learn !!!

[@SGTMARSHALL1]

I made mine back in 2012, it was interesting seeing the contrast as I used smaller magnets with more spacing and only 1 magnet to drive the wheel, I did enjoy your presentation

[@electronicsNmore]

Thanks for watching Marshall! Be sure to look over my "Free Energy" scam exposing video playlist below, you'll be amused. :-) Please share. kzbin.info/www/bejne/fJ7GeZJsbr6SkLs

[@leviemaehilario]

Thumbs up to this guy. Nextime put a hidden motor and a powersupply to make it identical to that scam videos. Thanks for making such a very informative video. Now i was right that those video in yt are hoax and scams because there was a clip that the wood flatform changes if you memorize the markings of the wood.

[@electronicsNmore]

Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/sKjHqpeOrqhgoZI kzbin.info/www/bejne/ZqPTkoKnfL5kbq8 kzbin.info/www/bejne/f5u0ppKef9tqi7c kzbin.info/www/bejne/eHukd6WuaLuKa6M

[@rogerd4559]

or just move to Rajakastan in the foothills of afgahnastan its a different set of physics there

[@robertackinson834]

Thank you sir for exposing another fine example of deception in our society by being truthful thank you again

[@electronicsNmore]

You're welcome Rob! For a big laugh, be sure to watch my "Free Energy" video playlist below, and share my channel with many others. Thanks kzbin.info/www/bejne/fJ7GeZJsbr6SkLs

[@dcesano1]

Thank you for this design info! Brilliant..

[@electronicsNmore]

You're welcome Denis. Be sure to watch my other "Free Energy" scam related videos below, and most importantly share my channel with others. Thanks! kzbin.info/www/bejne/fJ7GeZJsbr6SkLs

[@DronePath]

Denis Cesano u stupid or something

[@kamranetemad4968]

Thank you for your honesty and taking time to show the truth.

[@electronicsNmore]

Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You Other great videos: kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/bqPNXpijiLqZbas kzbin.info/www/bejne/ZqPTkoKnfL5kbq8 kzbin.info/www/bejne/f5u0ppKef9tqi7c kzbin.info/www/bejne/e6PThGp5acyIjKM

[@jesscline2766]

Thanks for being honest.GOD BLESS YOU.many many many times over.

[@electronicsNmore]

You're welcome! Please return the favor by sharing my channel with all your friends. Thank You Other great videos: kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/bqPNXpijiLqZbas kzbin.info/www/bejne/ZqPTkoKnfL5kbq8 kzbin.info/www/bejne/f5u0ppKef9tqi7c kzbin.info/www/bejne/e6PThGp5acyIjKM

[@forrestodell4322]

Great job sir. There is no free lunch when it comes to producing energy.

[@trinitydraco1]

Holy shit! This comment section is like the KZbin special Olympics! XD

[@electronicsNmore]

"Free Energy" videos attract the best. :-)

[@x-tremevidpro]

Love yur comment!

[@bettykrocker9088]

Great job. Tried to watch to the end but started getting dizzy. Rock on!

[@electronicsNmore]

Glad you enjoyed the video! Please share. Thanks

[@rogerd4559]

do you use magnets in your cakes? Betty?

[@jimyblanc993]

Uuuu my friend to spend time on your video takes a lot of wats

[@hvyledmark]

Great Post Man! To all of you out there, magnets are no joke, and will do damage if not handled in a controlled environment, in a proper manner!

[@electronicsNmore]

Glad you enjoyed it! Be sure to share the video link. Thanks!

[@WeirdOne19142]

Magnets are dangerous????? ?????

[@WeirdOne19142]

You know the earth itself is a giant magnet, right?

[@hvyledmark]

@@WeirdOne19142 well, yea, have you ever tried to use a compass with a magnet in your pocket? Very Dangerous indeed! :)

[@elected0nes741]

Thanks for the heads up on this. I hate it when people are so dishonest!😒

[@electronicsNmore]

You're welcome! For a really good laugh, watch my "Free Energy" video playlist below and share. Thank you! kzbin.info/aero/PLQ6IOhUBblU2GIBgWOYhrw0TyYGkyEAWE

[@michaelpowell135]

thank for saving me a lot of wasted time and effort good work !

[@electronicsNmore]

You're welcome! Be sure to check out my wide range of videos below, and most importantly share. Thank you kzbin.infoplaylists

[@jjwarner9419]

Without watching I'm going to say it doesn't work. Edit: Yep, it doesn't work. What a surprise.

[@williamhalford6691]

+JJ Warner I felt the same way. There really is no such thing as free power.

[@jjwarner9419]

Gentel Noober It's physically impossible.

[@LycansInc]

I have solar panel and a sun to provide me a free energy, still did not get any bills from the sun. its the same thing from the magnets but the difference is we as a people did not experiment enough with the magnetic free energy because we have people like you who only believe in electric company.

[@jjwarner9419]

LycansInc The sun is NOT free energy. It generates light through nuclear fusion. It will eventually burn out. Energy cannot be created or destroyed. So anything with magnets is useless.

[@cjames2925]

We don't pay shit for the sun

[@baztaylor5672]

A very interesting video,tried similar magnetic gadgets years ago ,no success.

[@electronicsNmore]

baz Taylor Thank You For Watching! Be sure to share my videos with others, and rate Thumbs Up.

[@iMan7210]

electronicsNmore The world needs more saints like you.Thanks! May God Be With You Always!

[@electronicsNmore]

Thank You. Unfortunately the world has an abundance of people that like to deceive others.

[@theultimateslugger1469]

Loh K.S. If the world had more people like him, the world would be even dumber! The average IQ is 100, his is probably around that. If the average IQ was 150, then FailArmy would go out of business!

[@electronicsNmore]

TheUltimateSlugger I forgot more than you will ever learn. By the way, my IQ is 132. I had it tested years ago by a psychologist. Learn to speak kindly to and about others, or keep your mouth shut. People like you are not welcome on this channel.

[@airruler8711]

The difficult part in designing this machine is hiding the motor

[@theupscriber65]

Im a mechanical engineer and LOVE the idea of a motor that runs just from the geometry of permanent magnets. Unfortunately I don't think it can be done because of the laws of magnetism and physics. I've tried, even using shielding that moves into place as one magnet gets close to the other to allow other magnets to propel the wheel.

[@justindamirgian5977]

Are you a real engineer cause I don't see how you can't make this work. Not this but something similar wit a really crude method

[@johntinti5301]

Very interesting! Thank you!

[@electronicsNmore]

Glad you enjoyed the video John! I have MANY videos that cover a wide range of subjects, so be sure to look over my video playlist below and most importantly share. Thank you

[@chrismathachan9547]

Thank you.. you are a life saver.... Believe me ... You are!

[@electronicsNmore]

Hi Chris. Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You

[@vsaitta]

Thank you for all of your hard work!

[@bubblgumjonesy]

Thank you. Well done Sir.

[@electronicsNmore]

Glad you enjoyed the video Paul! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You

[@Jizzlewobbwtfcus]

Fascinating. Gj exposing the charlatans.

[@electronicsNmore]

Thank you! Be sure to look over my "Free Energy" video playlist below for a good laugh. :-) kzbin.info/www/bejne/fJ7GeZJsbr6SkLs

[@rogerd4559]

are they all from Charlatan North Carolina?

[@rodrigorusso5612]

Thanks my friend. I say hellow from argentina. I was going to loose toó much time with that sheet.

[@electronicsNmore]

You're welcome! Be sure to watch my other "Free Energy" scam exposing videos below, and share. Thanks kzbin.info/www/bejne/fJ7GeZJsbr6SkLs

[@pbiopit.4852]

ist no Free Energy........ its your finger energy !!!!!! lol hahahaha !

[@catkeys6911]

So, yes, the conservation of energy law is correct. This video is great for those who won't believe that until they actually see it for themselves. Your work and effort is definitely appreciated.

[@electronicsNmore]

Glad you appreciated all the hard work that went into making this video! Please be sure to share my YT channel with others, and watch my other great "Free Energy" scam exposing videos below. Thank you kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/a53Zd4aHZ8Rnqsk kzbin.info/www/bejne/eITHhHechLyVhNU kzbin.info/www/bejne/f5u0ppKef9tqi7c

[@nikhilpanwar2623]

@@electronicsNmore read comments again

[@longhoffer]

Very good and detailed explanation. Big THUMBS UP.

[@electronicsNmore]

Thanks Russell! Be sure to check out my other great videos below and share. kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/bqPNXpijiLqZbas kzbin.info/www/bejne/jZ68h3mmqLyZeMU kzbin.info/www/bejne/ZqPTkoKnfL5kbq8 kzbin.info/www/bejne/eHukd6WuaLuKa6M

[@closeup7861]

I'm writing this comment from Mars on my self-made spacecraft...can someone debunk me pls!

[@magneticpizzasr]

Close Up highly probable btw did u see our message, yknow the biggest prime number we know of ????

[@chapbloom7807]

Jetson you got to abandon that early 60's technology. I'm using all neodymium magnets and friction less bearings I done past every Uranus trying to leave the milky way. I left Shortly after the Apprentice president got elected. I hear he is trying to get the coal powered plant out of mothballs and back on line.

[@mooglg8663]

verizon doesn't support Mars Internet ;-;

[@chapbloom7807]

I don't have Verizon I'm so Past ^(!)#@8$. Verizon is the only signal that reaches out here in the void of space due to the NEODYMIUM MAGNETS. strength interference with the bars !!::,,.. I quit paying Verizon $300 amonth for 2 phones in 2008. I will leave the sarcasm speculation and miss information behind us. . I been interested in magnetism since the early 80's when a man by the name of Joseph Newman from Lucedale MS. MR Newman was looking for investors on a magnetic machine that amplifies power. He new at the time that the technology was not available at the time . The problem with magnetism is that they have to be staged like a a radial engine on a airplane and timing is very critical to gnats ass . I will find a chart of a magnets performance It is critical to the" .0001 " This is a $152.00 magnet with a 3oo lb pull strenght the loss is less dramatict the stronger the magnet Model RY0www.kjmagnetics.com/largergraph.asp?CI=1&pName=RY04Y04y0 the last 0.250 1/4 inch of travel is 200 lbs of force. !!This magnet will hurt or break your fingers $7.00 dollar magnet 31.5 lbs pull RX054 N52 www.kjmagnetics.com/largergraph.asp?CI=1&pName=RX054-N52 the bottom is the distance look at the pull force in the last 0.150 labout 3/16 in its over 25 lbs of force www.kjmagnetics.com/largergraph.asp?CI=1&pName=R8201 A ..43 cent magnet loses most of its 1.1 lbl pull if not very close to another magnet or metal atractionat less than 0.100 one tenth loss of almost 100 % of its force This is not the complete motor, it is only one of the rotor with commutator of tenth to one 15th of what h proposed back in early to mid 80's the motor was supposed to weigh over a 1000 lbs. kzbin.info/www/bejne/eamQdnaEbZt3Z7s The more cylinder they have the more complicated they get. All the best airplane radial engines by design have a odd number of cylinders. Not only do they run smother that way ,but they eliminate a inherited cooling problem when the cylinders are lined up behind one another that became a problem as the engines became more powerful. The Pratt & Whitney WASP Major R4360 four rows of seven cylinder. for a total of 28 cylinders per engine the biggest planes of the time having four engines, e,g American military aircraft, including the Boeing C-97, Douglas C-124, and Fairchild C-119 transports and the Boeing B-50 and Consolidated B-36 bombers. each had 112 cylinders under their wings, the early models putting out 3000 HP each the later models 4300 hp that was a lot of pistons putting out the lift required. The B29 had a similar engine . The Wright R-3350 Duplex-Cyclone was one of the most powerful radial aircraft engines produced in the United States. It was a twin-row, of 9 cylinders a total of 18 cyliders per engine supercharged, air-cooled, radial engine. Power ranged from 2,200 to over 3,700 hp (1,640 to 2,760 kW), depending on the model. Very similar I believe from reading that was the most complex piston cylinder design. ever. Hers two links with some clear images. airandspace.si.edu/collection-objects/pratt-whitney-wasp-major-r-4360-59b-cutaway-radial-engine en.wikipedia.org/wiki/Wright_R-3350_Duplex-Cyclone If you know the complexity of that engine it is amazing how long those planes had to stay up in the air with so many moving parts.www.aviation-history.com/engines/r3350.htm I tried to look up the moving parts of the two engines something I never run across. I do believe the SATURN V5 had less moving parts than two of those engines. . Any how back to magnetism on a Machine like Mr Newman Proposed It was not considered perpetual, it needs more rows of stators/ rotors/ armatures . instead of four rows of stators it requires eight to ten stators at the very minimum, each stator requiring probably ten times the poles of a regular alternator. The pictures that I seen have staggered stators The complexity of the whole thing Is that it requires I'm going to guess 1,500 excitation per revolution. on top of that the output is a/c and it had to be rectified back to dc then ass it was supposed to run of a bank of batteries. I have not heard or read what ever became of that project but I'm sure some of the technology of fast switching to that critical of degree that it required back. is available today. The machine needs timing mechanisms and super fast switching and a computer to run. I my opinion of what I read and understand on the very few technical write ups and schematics. a patent was never awarded , even though the patent office said if had it merits and challenges. The same challenges that fuel injection and port fuel injection lacked in the very beginning in the late 80's before they started using cam, crank position sensors in addition to the distributor. Back then they had to get rid of the old single distributors. and started to use 1 coil per pair of cylinder. some GM 6 cyls Had spark going from one coil to two cyls at the same time one of the cyls was on at the end of the exhaust stroke. Others had to go all out and use one coil per cylinder . It had to do with timing and/or the saturation of the coil something that they had never encountered when distributors had points that had to be replaced every 3000 to 5000 miles, that affected a lot of those engines especially the ford V10 I worked for a company that had many of those, they always had tune ups that ranged from $400.00 to $1000.00 dollars. They never got more than one normally they started getting rid other after 200k depending on the history of the truck and the driver. www.ford-trucks.com/forums/21417-triton-v10-the-good-the-bad-and-the-ugly.html End note, today with the multi processor computer computers. Like this Quad Processor Windows 7 home premium that I Bought used in 2010 , it does well as long as the ram stays clean. I not sure how much longer it going to run for, the new Firefox Quantum just bought it a little more time about 2-3 week ago. There is no free lunch, free any thing some one some where at some time has payed. If you think you know magnets you will not have to look this up. Pyrolytic Graphite. www.kjmagnetics.com/proddetail.asp?prod=LEV2 Happy reading and traveling . I will send you a short list of things that got released before their time another day.

[@scotttovey]

I don't debunk space cadets. They tend to blow up when they realize that they have been debunked. Besides, it's quite painful to fall off the top bunk!

[@rc-huina8221]

Good job 👌

[@stephenkingsdale2411]

Use a magnet buffer after each second repelling curve... To buffer the rejection, allowing a short period to allow the repelling force to have more energy output. Did like your through video

[@gavinlauder4020]

you have put forth an interesting idea. can you walk me thought that a little more?

[@chrisehmke1651]

No matter how you arrange the magnets, there will be no energy output. There is no free energy, it's an illusion.

[@burtrandom]

thanks man saved me some time. move on .

[@electronicsNmore]

Be sure to check out my other great videos below and share. thanks! kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/jZ68h3mmqLyZeMU kzbin.info/www/bejne/bqPNXpijiLqZbas kzbin.info/www/bejne/f5u0ppKef9tqi7c

[@briantunzi2462]

Right ! Time to Move on UP !

[@danmalaca3246]

Thanks mate!! Its really explain that there is no such free energy !!!..hello to all from philippines 🇵🇭

[@electronicsNmore]

Glad you enjoyed the video! I have a lot of excellent videos on my channel that cover many different subjects, so be sure to check out my extensive video playlists for other videos of interest to you, rate thumbs up, and share my channel with others. Thank You kzbin.info/www/bejne/fJ7GeZJsbr6SkLs kzbin.info/www/bejne/bqPNXpijiLqZbas kzbin.info/www/bejne/ZqPTkoKnfL5kbq8 kzbin.info/www/bejne/f5u0ppKef9tqi7c

[@criticallook1352]

+electronicsNmore Can you please provide a link to the video which caused you to go through all the trouble to replicate and test in this video you created here? :

[@electronicsNmore]

I never supply links to "Free Energy" scam artist videos. Supplying links only helps them make money by being a scam artist. Thanks for watching!

[@criticallook1352]

+electronicsNmore How then can we see for ourselves what you are attempting to do, and if you are doing it correctly? You make many references to some video which you lambast, yet refuse to share with us a link to it?!! You are then no different than those whom you claim intentionally leave out crucial elements of its operation and construction. If you do not provide this vital piece to the puzzle, then you are no better a person than the scammer

[@electronicsNmore]

@@criticallook1352 If I made a video, you can be assured it was done right. LOL You sound like a "Free Energy" defender.....Sad.