Emergency Truck Front Axle Repair for Heavy Load Damage

[@peterscheer445]

as an engineer I am blown away how they can reweld the front axle and get it aligned with only a long straight edge.. there are multiple angles involved to get the spindle just right for front end alignment... amazing

[@MI.fckptn]

Pls take a look at 22:53 and 23:05, I am not sure that caster/camber are correct.

[@juliogonzo2718]

I'm thinking quite a few people who would watch this have done some wrenching. You got balls coming on here and telling us you are an engineer 😂

[@earl3334]

right so the whole front end vibrates going down the road and you cant keep tires on the front end but he got it perfectly alligned

[@TheLukasDirector]

Maybe, just maybe, it really is only a temporary fix while they are waiting to get a new axle. Although I have my doubts.

[@mikewilliams2072]

Do you really think the angles are any where close to what they should be?

[@dwansbo]

It always amazes me to see these guys working in the dirt with minimal PPE, yet they manage to look as if they have just returned from the barbers. Hats off!!!!

[@amazingskillsdiscover117]

Thank you for your encouragement.Always Stay connected with us 💫🥂.

[@osmarsantos325]

Vocês que nos incentivam com essa força incrível no trabalho pesado!! Vocês são exemplo para todo o mundo civilizado!!! Que Deus os Abençoe!!!🎉🎉🎉🎉🎉

[@corneliushfc4370]

PPE😂

[@МаксимТаранов-м2м]

Постановка для видео

[@randallhutchcraft5518]

No doubt about it you mechanics are some of the best I've seen, I know I've been a mechanic over 50 years now. Great job. 😊

[@amazingskillsdiscover117]

Thank you for your encouragement.It means a lot to us.Always stay with us and appreciate us.

[@JohnDoe-ft2nh]

These guys are hard-working people, everyone gets involved, no standing around. It's very impressive.

[@amazingskillsdiscover117]

💫🥂

[@bambangdumalang4580]

4

[@PeterAbé-h5q]

ich bewundere das Volk die bekommen das wieder hin ,in Deutschland undenkbar

[@Besserwisser-lk9mo]

Hält hoffentlich mindestens, bis die Rechnung bezahlt ist.

[@ВалерийПлотников-л5г]

​

[@bernardcerou]

Je salue tous ces gens qui méritent un profond respect. Travaillant des conditions quasi médiévales, mais à force de courage et d'abnégation je vous félicite et je vous admire. France. B.

[@amazingskillsdiscover117]

Thank you for your appreciation.Stay with us 💫 and also appreciate us with your words

[@РамильМухлисов-1986]

Судя по ржавчине в месте разлома, давно уже треснутая была деталь

[@ИгорьХоджаев-б6м]

Ребята молодцы!!! Самые простые инструменты- творят чудеса.

[@glennschemitsch8341]

You could see that the axle was cracked for a long time and then it broke all the way through. The weld should have been reinforced with extra plating all around,

[@muhdaliff754]

Damn u right....

[@-NoNameNone-]

It doesn't make any sense. In any case, the repair site will be cut off sooner or later. The beam should be forged, and they welded the metal off. It's basically a ticking time bomb. I feel sorry for these people.

[@cristianmolina8148]

yeah man, I thought the same..but then I realized they are working on the street under a loaded truck with out any safety measurement at all, just flip flops...guys are really tough..

[@MOUTTABIMOHAMED]

Bad Work

[@mussamohamed2722]

They don’t do pre trip and post trip inspections at all. This could’ve gone horribly wrong, luckily nothing bad happened.

[@DaveGreeneramblingcarpenter]

Brilliant workers, these guys work hard, and they will have got this truck driver back on the road,

[@yuribakaroff6258]

Самое печальное, что этот ремонт до первой ямы. Такие важные детали меняются на новые, а не ремонтируются и не свариваются. Слишком большая масса у этого автомобиля, никакой сварной швов не выдержит. Но все равно, молодцы, прям автомеханическая скорая помошь!!! Привет из России, Тольятти!!!

[@amazingskillsdiscover117]

Welcome to our world Amazing skill discover.And Thank you for your response.Always stay connected with us and encourage us.

[@Виктор-т1д2ш]

Что не выдержит? Сварной шов? Если провар качественный то балка лопнет где угодно но только не по шву, вы явно у золотарей не работали, там (Тяжёлая) техника работает и постоянно что-то ломается рвётся и лопается, сварщики там далеко не последние специальности.

[@MaheshPatel-nk9fg]

Awe inspiring. Very hardy people making a living to support family ,community and country.

[@amazingskillsdiscover117]

Thank you for your compliment

[@akkordeonistpavel]

Починили до первой ямы! Такую деталь не восстанавливают а меняют. Метал уже потерял свою изначальную структуру, если он треснул. Можно найти старую деталь, но хорошую, не восстановленную.

[@arlankarahan51]

У этого парня груз. Думаю довезет груз до места а потом уже будет менять балку не торопясь.

[@Talla2XXL]

​@@arlankarahan51охотно верим😂

[@fsdreegf]

@@arlankarahan51 ага. это же пакистан. там ничего не меняется. меня больше волнует вопрос. нахрена они электроды гнут? лучше варит?

[@arlankarahan51]

@@fsdreegf спроси у сварщиков, они все это делают.

[@ОмарХаим-ф5г]

​@@fsdreegfМожет электроды такие с завода?😊

[@pablomonterorodriguez2410]

Verdaderos mecánicos de la automoción. Esto en cualquier lugar del mundo sería un desastre para los circulación. Reparado "un situ" sin problemas y sin entorpecer a los demás usuarios de la vía. Enhorabuena!!!

[@amazingskillsdiscover117]

Thank you.Stay connected with us 💫 and appreciate us

[@ИгорьВоробьев-н5м]

Я думаю сварка долго не подержит ,и грузят они там в два раза допустимой массы😀

[@videosjoseruben]

предприятия - это предприятия, которые они взимают плату, если оно снова сломается, чтобы снова взимать плату, ремонтируют бизнес без переговоров

[@ФасовкаРафинация]

грузят столько сколько влезет, на массу никто не смотрит.

[@EmRaida-in7hv]

No power tools but they troubleshoot the defect,simply amazing

[@amazingskillsdiscover117]

Thank you

[@ДмитрийМакаров-ь6ю]

неужели сварка будет ходить?кажется это не на долго🤨

[@Илья-щ7м5д]

Вы правы)

[@СерикОлло]

Надо было по бокам балки усилить листом

[@TooinsAZ]

The delivery was still delivered on time, great job guys..

[@D...Charger]

Crazy how they don't pull it off the road backwards,than risk there lives doing the job in the middle of what looks like a very busy junction.Pull it backwards 100 yards and safety is much better.Amazing work with what they have.

[@Sam-ob4of]

*91,44m

[@D...Charger]

@@Sam-ob4of ?

[@amazingskillsdiscover117]

Thank you for showing your concern.Stay with us 💫 and always appreciate us with your words.again Thank you

[@davidh4514]

, with what?

[@pabloromano4746]

Sobra gente en ese Pais les importa muy quienes viven o quienes mueren . Vida de perros abandonados .

[@ЛехаИванов-к2э]

Интересно насколько далеко он уехал после такого ремонта?

[@sever8182]

до первой хорошей колдобины. Судя по тому как у них все быстро разбирается гайки не успевают прикипать-капитальный ремонт после каждого рейса, да и в пути пару раз на ремонт встанут

[@АлишерУмурзаков-е4г]

Да не говори , да это ерунда я не давно видел как эти пакистанцы заварили обломанный каленвал😂

[@opatopat1865]

Mungkin 100 meter 😂

[@Talla2XXL]

​@@АлишерУмурзаков-е4гколенвал норм, всегда так делаю 😂

[@fsdreegf]

ну работает же!@@АлишерУмурзаков-е4г

[@evertderuiter9300]

I admire the skills and level of expertise. Never will ai be able to be like these guys. Humans are special!!!

[@amazingskillsdiscover117]

Thank you brother for your appreciation 💫🥂

[@benhadouchenadir4370]

❤❤❤❤❤ماشاء الله تبارك يعطيهم الصحه رمضان كريم

[@kevinmoore342]

Great men doing a great job

[@amazingskillsdiscover117]

Yes, thanks

[@YOUNGFUJI]

Good job,,,,,,, thank you for sharing👍👍👍👍👍👍👍👍👍👍👍👌👌👌👌

[@amazingskillsdiscover117]

Thanks for visiting

[@josemanoelxmarcondes9239]

Parabéns pelo trabalho de vocês, um salve aqui do Brasil 🇧🇷🇧🇷🇧🇷🇧🇷

[@amazingskillsdiscover117]

Thank you 🇧🇷🇵🇰

[@gary9674]

These guys can weld anything from broken axle to the crack of dawn ! Amazing

[@СтроюсьСам]

Отличный ремонт. На неделю хватит 😂

[@КонрадКарлович-й2щ]

Три условия хорошей сварки: гнутый электрод,шлепки на сварщике,маска из канистры. И успех обеспечен!

[@amazingskillsdiscover117]

Thank you for your tip's

[@nikmaison3953]

У него дорогие шлепки.

[@fsdreegf]

на какой угол надо гнуть электроды?

[@КарабасБарабасов-и6з]

@@fsdreegf Надо сесть на корточки, взять в руку держак с вставленным электродом, опереть локоть о колено и станет ясно, на какой угол следует гнуть электрод, чтобы локоть остался на колене, а кончик электрода попал в сварочную ванну.

[@ТатьнаИглинская]

@@КарабасБарабасов-и6з Та шо ВЫ им за то рассказываете Народ задающий про то вопросы сварку видел только в подобных роликах Причем варят моджахеды дай бог каждому образованному с бородатым разрядом

[@rajeshwari3817]

Fantastic work. Good. All workers are good machine. I like it.

[@amazingskillsdiscover117]

Thank you very much!

[@aleksandrskrilkovs3230]

Артисты! Такое ответственное место и на сварку. Понимаю не от хорошей жизни,но безопасность.

[@amazingskillsdiscover117]

Thank you for your response 💫

[@halfpound8oz]

No towing fee no storage fee and no waiting it's a win win win

[@kevinmoore342]

You men are the best. Truly blessed by god.

[@amazingskillsdiscover117]

Wow, thank you

[@МаксимТаранов-м2м]

Просто волшебники тяп ляп и готово палец вверх это гарантия сто лет проходит а может и больше

[@lazer5582]

These guys are amazing,i,d never fear any mechanical breakdown if they were part of my team.

[@amazingskillsdiscover117]

Thank you for appreciation 🤗

[@leonizadllumayag5108]

Its not axle that is broken, its the I-beam, replace the I-beam is the solution as weld repair creates stress in the welded joints and likely breaks again, thats my experience as an autpmotive welder

[@Александр-н3к5п]

Сварщик от Бога.😊

[@amazingskillsdiscover117]

Thank you

[@Ahmad_gamer46]

Videographer is a great person

[@mantapakabu74]

22:19 the moment where the guy dusting the windshield proves the brilliant service they provide. lol

[@Besserwisser-lk9mo]

Yeah, the driver himself! Some others would use the windscreen washer system as available.

[@amazingskillsdiscover117]

Thank you

[@MrEric2cu]

No power tools, just a wrench, hammer, and piece of gum. In flip flops! Mad respect.

[@chrisnelson2705]

If you can't give them credit for what they achieved don't say anything. I'd like to see this done at the side of the road in the uk. No chance. Well done guys. Honest graft for honest pay.

[@me3333]

That is such a ridiculous thing to say. I'm not a safety nazi by any stretch of the imagination but what they are doing terrifies me. Full credit where credit is due. In a country where life is completely meaningless and safety is just as frowned upon as eating a bacon cheeseburger, what they are able to accomplish with what they have to work with is nothing short of amazing. But in a developed country this is criminally insane. I cant speak for the UK as I am a yank but there is a reason you will never see not only this type of repair but also this repair done in this type of location in the US. Even overlooking the legal aspect, there is not a true mechanic I know that would ever risk putting this type of repair on the road much less repairing it in the middle of a road that the traffic direction seems to be gender fluid. What a lot of people don't realize is that not only does the mechanic have to worry that the front beam (that usually has the words "Do not heat or weld" casted right into it) might break where the weld crystallized and got brittle then hurt/killed the driver, but also sent the truck into the oncoming suv that his wife just picked up his kids in and hurt/killed them as well. Look, I am a huge fan of "make it work with what you've got" and I fully admire how everybody has a job to do and they do it without any of the drama that seems to be a requirement here. However they should at least pretend that welding a front beam without any pre or post heat and putting it on a truck that is overloaded by an order of magnitude, is probably not a wise thing to try if you can avoid it. I am not against people pointing out the fact that if you tried this in "blank country" you would be prosecuted and also if it prevents only one farm boy from doing this to his grain truck and putting it in "Send It" mode then I'm not worried about the Pakistanis failing to get a pat on the back. Yes they are hard workers. Yes they made it work with practically nothing. Yes they are brave/insane for "fixing" it in the middle of that road. NO you should NEVER try this at home. Sorry the post is so long

[@mrmeaner3917]

@@me3333how can you say their lives are meaningless, that attitude is more disturbing than their limited regard for safe working practices, they got it done & nobody was hurt. In a world of snowflakes you’re a snowman!

[@me3333]

@@mrmeaner3917 OK troll

[@MujoNovak]

Yep 100% @@me3333

[@amazingskillsdiscover117]

Thank you

[@screwsnutsandbolts]

Excellent job ! 👍

[@KingsleyThomson-j1w]

I have done suspension work on trucks and trailers and am impressed when I see bush mechanics like these do their craft with minimal equipment!!! However these trucks are equipment are flogged in Australia we would replace the axle and steering components and king pins and bearings and do a professional wheel wheel alignment,,,,but hats off to these guys 👍

[@michaelpetrov7821]

These guys are great at these things! 👍😊

[@javierhernandezgarcia4479]

Que peligro...ponen en riesgo al conductor y a las demas personas...esa soldadura del eje en cualquier momento se tronara otravez😮

[@vadimjcb3cxmurmansk]

👍

[@simonmannell9809]

It’s good to see they all wear their safety sandals

[@KonstantinUdakov]

😂 thanks for pictures. Very interesting to see your country regular life, good people

[@gordonsummerill]

Excellent work enjoyed video ❤❤

[@amazingskillsdiscover117]

💫🥂

[@eastcoastrifraf9101]

Wow. Scary in so many ways.

[@roachcoachhelis6387]

I'm amazed that they work around as heavy equipment and welders with no shoes or no gloves at all

[@thecountrybumba6454]

Техника безопасности отсутствует напрочь.

[@Владимир-и4т9р]

Ещё и под машиной 😮

[@КонрадМихельсон-л1ь]

Их там 240 млн. Труд обесценен ввиду большого количества необразованных людей.

[@wiwiwi110]

Пипец) они на коленках грузовик ремонтируют 😊

[@ДимаХодаковский-т3в]

Чего удивляться делаю примерно тоже иногда и минус 30 наулице в основном сам

[@Илья-щ7м5д]

Ну что за красавцы! Есть же

[@amazingskillsdiscover117]

Thank you

[@Abhishek-C92]

They should have replaced the rod. Welding will not last. It is weak already

[@johnready630]

It might hold till the next time they overload it.

[@jesstill7833]

Well done it makes me so sad ,the conditions they work in but they seem happy ,,they know their jobs God bless them 🙏🙏❤️💪👍🦘

[@amazingskillsdiscover117]

Thank you for your encouragement.Always stay with us and appreciate us with your words.

[@sureshkalhapure1260]

ये है असली फीटर सलाम आप लोग को

[@amazingskillsdiscover117]

Thank you for your compliment

[@മലയാളി-ഡാ]

Will it be an accident again?god bless u

[@amazingskillsdiscover117]

Thank you.

[@HanmixTires]

Great work💪💪👍👍

[@amazingskillsdiscover117]

Thank you 🙌

[@Илья-щ7м5д]

Хоть усилили бы балку

[@fsdreegf]

второй балкой

[@МегафонМегафон-ч3з]

Красавчики мужики работают. 👍💪🤝

[@harshabiliangady3211]

Great job gentlemen. Very impressed with your work.

[@clauditube12]

This weld won’t hold for long considering how much load they put on these trucks. I thought for a minute they were going to replace that part.

[@glennschemitsch8341]

Replace with another broken/ repaired axel.

[@abdulmutaliebdaniels3531]

This is Pakistan OK, 3rd world. Some in the Americas

[@federalpi34]

Povo inteligente e trabalhador parabéns.Estou no Brasil.🇧🇷🇧🇷🇧🇷

[@sergiovargas6041]

Dios bendiga a estos hombres. Trabajo rudo y minucioso. Por supuesto que la calidad de la soldadura no es la mejor, y como bien sugieren algunos comentarios, es deseable cambiar el eje por uno nuevo o usado, pero sin fracturas. Solo que aquí es muy difícil. Eso no opaca su gran esfuerzo. Saludos

[@amazingskillsdiscover117]

Thank you for your amazing reply .It means a lot to us

[@oleg1701]

Балку заварить!!! Это что то из разряда фантастики или дЭбилизма полного!!!

[@sever8182]

работа ради работы

[@oleg1701]

@@sever8182 точно

[@forest8074]

Видать не от хорошей жизни.. хотя так рисковать я думаю не стоит...

[@dustyroads5811]

I would be replacing that beam a.s.a.p.

[@гусьлапчетый-с6л]

трудолюбивые люди! ремонты эти не от хорошей жизни что-то новое купить не каждый может

[@KonstantinUdakov]

Fast and cheap, but HORRIBLE weld)

[@grasub1]

There is nothing wrong with that weld. Perfect. Drive on.

[@324atleD]

@@grasub1 You have no clue. It is very difficult to weld cast iron. Even more so without any preheat, which did not happen here. Lucky if it held a day.

[@Sam-ob4of]

​@@324atleDforged steel most likely, I think making that out of cast iron would be a terrible idea because of the brittleness

[@buddylouis8348]

​@@324atleDthere forged steel, not cast iron

[@luismenezes1627]

​@@324atleD19:43

[@Marylou-g3e]

Very good and professional work

[@amazingskillsdiscover117]

Thank you very much

[@giovannifinievoli8825]

good job! Let's hope it works

[@amazingskillsdiscover117]

Thank you for your response

[@bruceallen2736]

I love these guys. Get her dun! With a Merican accent! With much love 🇨🇦

[@amazingskillsdiscover117]

Thank you so much for your response 💫💫

[@loaimuaz7599]

ماشاء الله عليكم يا باكستان .. الله يحفظكم .. دقة و سرعة ..🎉

[@amazingskillsdiscover117]

Thank you for your appreciation.Stay with us 💫🥂 and always support us with your words again thank you

[@AhmadYani-yn1ue]

Very hard and dangerous work, always be careful, guys

[@amazingskillsdiscover117]

Thank you for showing your concern

[@raomsr8576]

Good job. Hardwork people. Well done.

[@ferriesoftasmania]

Unfortunately the beam will break again. They are massively overloading it, which is why it broke in the first place. Now it is also brittle in that area. But they got it mobile again.

[@amazingskillsdiscover117]

Thank you for your response 💫 We need to address overloading issues to prevent further damage.

[@sunilphalakdhari3869]

Great skills. Really amazing what hard work and teamwork can achieve with the minimal resources. Others can learn instead of complaining all the time. BUT personally, I would have braced with plating around welded area

[@GFSwinger1693]

0:20. It is obvious this axel has been cracked for some time and a routine inspection of the undercarriage could have likely spotted pending trouble before a complete failure occurred. Look at the rusted area vs. the shiny area. That metal was already half broken for a long time.

[@jeffjackson8381]

These guys are a different breed 🧐😁👍🏼

[@pintanmanalu8965]

Mantaaaap...!

[@derekpaton2775]

we need you in the UK. amazing skills

[@amazingskillsdiscover117]

Thank you for your appreciation 💫🥂

[@robertook]

They could at least clean the bearing and add some grease.... so much effort and low quality

[@olddave4833]

love his welding hood.. not even repacking the wheel bearings, this is the fastest pit stop that i have seen, just get it back on the road as cheap as possible.. wonder how much they got fort that job ?. maybe 15 dollars

[@sptomcat866]

真厲害，👍👍👍

[@amazingskillsdiscover117]

Thank you 🙏🙏

[@michaelszczys8316]

" let's overload that super strong grade 8 bolt till it snaps then replace it with a new grade 0 bolt." Basically

[@samuelsufia5428]

Tremenda de uma gambiarra perigosa.

[@santiagoberjon8945]

Me encanta como trabajan una brigada de estos trabajadores y yo cerraría la mitad de los talleres de España

[@adailton969]

*Um serviço fantástico!*

[@amazingskillsdiscover117]

Thank you.Stay connected with us 💫

[@mrmeaner3917]

It wasn’t pretty but absolutely fucking incredible what these guys can do with very little.

[@Alimran31315]

Nice work

[@amazingskillsdiscover117]

Thanks for the visit

[@apo9117]

احترافيه وإبداع تحيه لهؤلاء،الرجال

[@shahrulnizam1390]

This happens because over loaded..but the mechanics fixed very Nice the best skill ❤

[@titosmuvirimi6096]

Why not stop overloading,it's not worth it.all the profit is going to the mechanics

[@awdrifter3394]

Labor is cheap in these third world countries. They can afford to hire these mechanics to fix the truck, but they can't afford to buy a second truck so they don't overload.

[@Skyflyers]

It’s like the the paramedic crew comes to a serious accident scene and treat injuries on the road

[@RijaraEka]

Nice bro

[@mandynazco1566]

Saludos amigos y muy buenos todos sus trabajos y seguimos sus videos 🙋

[@SkillMasters-vy2lo]

Good work 👍🏻

[@qoobeeykaliilcawad8027]

Make extremely handwork symbol, no towing expensive no westing off time, driver is so happy dusting of and go, wow job well done 👍,

[@JorgeEnriqueZambranotinjaca]

Felicitaciones ah todos los mecánicos del mundo que deben aser las cosas bien

[@Be-Respected]

I m satisfied with the wilder ❤& in there everyone is experienced people

[@amazingskillsdiscover117]

Thank you dear for your appreciation Stay connected with us💫🥂

[@Igor.Zubarev]

золотые руки

[@montanawhite5699]

You guys are too good. America got nothing on you guys but safety. We replace, you repair.

[@dannym5865]

Tell me your not a mechanic or welder without telling me

[@montanawhite5699]

@@dannym5865 I’m actually maintenance on a farm so I do both. Of course I don’t weld like this. I’m American, so I replace parts.

[@trofi-master]

Странно что она сломалась. Он же полупустой, там всего 50 тонн загрузили 😂😂😂

[@fonkanzler5612]

Меня удивило то, что 4 домкрата и несколько брусков привезли в кузове большого самосвала. Хотя, помню, в армии на склад за 5 автоматами ездили на КамАЗ-53501 (10-тонный). В кузове небольшой ящик лежал, на нем сидел боец, охранял.

[@vano3123]

Надежность 1000%😮