Emerson CQC-8 knife: My Favorite Emerson

[@dirtystrings]

Just a shout out to Nutnfancy enjoy your videos,very informative and entertaining.I just bought this knife in a satin finish.I can't stop buying knives and your not helping! Keep posting reviews,(a fan)

[@Bohica173]

I asked around on another forum, and apparently this isn't unheard of with Emersons, so what I've done is tighten the blade tension just enough to eliminate the blade play, and just work on breaking the knife in and practicing drawing it out. Thanks for the input.

[@jtscustomcutlery317]

Thanks nut'n! adding it to the shopping cart. As always, great video and keep up the good work.

[@hockeyplaya131]

Man, he reminds me of the guys from the knife show on the home shopping channel. Just straight to the point, great explanation and detail. Very good review.

[@jonconsiglio]

The CQC-8 still comes how you got yours... They call it a standard V-Grind, but they're referring to the blade grind, not the edge grind. The edge grind is a chisel grind - ground on one side, then the other side just has the burr knocked off basically. The Emerson CQC-7 is a true Chisel Grind where only one side of the blade is ground and the other side is completely flat, so it lays flat against a table. Still a great knife and easily fixed. Love your reviews! Jonathan

[@nutnfancy]

@ihaterobbie123 See his knife storage video for clarification. Nutn has literally hundreds of knives, and some are in the safe, some are in storage in rubbermade containers and some are hither and yon in the house. The closest blade he has access to is the one he carries..and he almost always has one on him. As far as your comment goes, Nutn would agree..you can't access it if its locked in a safe. -- Veri (forgot to sign the last one, I'm his sister)

[@RedDawnAK74]

just bought this knife from notjustknives can't wait 4 my first emerson , been wanting this knife since this review came out . thks nutnfancy

[@13002066]

Good review. Thanks for your honesty and detail. You address some aspects of the knife that I had concerns about but no longer do. Emerson knives are beautiful and practical knives. I EDC a "7" with the "wave feature". I'll be purchasing this one soon.

[@TacticalCivilian]

I ordered two knives from yourcornerstore I got them a month later, and I even upgraded shiping

[@meuberepic]

@aznpos531 a torx or hex/double box screw gives the driver more contact points so you can apply more force effectively. do you need 100+ pounds of torque on a knife pivot? i sure as hell don't.

[@blacksteel7791]

I purchased this knife because of you:)) thanks Nutn!!

[@jeepnicc]

Ernest Emerson build great blades. I have lusted after his CQC-13 for a while now. Roughly 150 bucks, while very fair/reasonable, is hard to come up with when money is tight. Awesome vid man!!!

[@BlackJacket705]

got one, carry it everyday, wouldnt go anywhere without it. awesome knife

[@MrGebbs]

nice knife. emerson knives are great, im a big fan of the cqc7. got a question tho. iv noticed that u dont have many serrated knives, so why is that? do u not like them? just trying to learn because almost every knife i have carried was partially serrated. so what are your opinions about serrations?

[@fishman80]

SICK knife. got this in stonewash and the new ETAK. insane.

[@gun00b]

Dude, this Knife is my dream knife. It's not just a sturdy, monstrously built tank that's sharp as a razor. It's oozing 2KOC (2nd kind of cool) oozing from it. Look at that blade shape! Look at it! I am turned on, completely. COMPLETELY!

[@BladesAndCounting]

Please review the a-100s!

[@experimentjon]

Interesting thing about that CQC pivot is that you can use a credit card to tighten the pivot in a pinch.

[@sherman614]

I'm looking into this being my first $100+ knife, but I'm curious, How's the factory edge on an Emerson? Cause if I'm going to pay more then $100 for a knife, i want it to be beyond razor sharp lol

[@jbrind00]

Nice review. I encourage you to look into the CQC10, especially since it peaked your interest while you were skimming through the Emerson site. I find the 10 to wave the easiest of the EKI lineup. I don't want my comments to detract from your thorough and excellent review. Enjoy in good health.

[@ReclusiveMountainMan]

Damn, I'm and Emerson addict. Just dropped $487 on two Combat Karambits. I sold my old one just to buy two more. WTF. Also upgraded all my 2012 models with 2013 models with Stand-Offs. The 2013 models have stepped things up. Really impressive.

[@XTXT555]

I never leave home without it.

[@applevalleyjoe]

Have you ever compared it to the Mini (Horseman)? It seems to be that it may be more useful than the big CQC-8.

[@riddick2798]

@nutnfancy Hey I would just like to ask why you dislike the karambit style knives?i got sad when you said that lol

[@RabidSpatulaPaul]

Looking to get a Mini CQC-7. Would make a heck of a pocket knife.

[@KiloJuliet28]

How about the Emerson Horse man?

[@GenKraid]

@simplyslender11 If you take a frame lock and put a G10 scale on the outside it IS a linerlock. Shouldn't the thickness of the lock be the important part?

[@aznpos531]

Interesting how the CQC-8 employs philips and flathead screws. Which raises the question...why do most blades use torx/hex screws when philips and and flathead screwdrivers are so much more common?

[@thevic]

i love all knives and most of them are made by SOG ive had a Mini X-ray Vision for a few months now and its amazing you should review one!! lately ive been gettin in to Emerson knives and im planning to get the Mini CQC-7B another reviewable suggestion! keep up the good work!

[@darvidk]

I noticed that your CQC-8 has an additional screw on the handle compared to mine. On the non-pocket-clip side. I have a 2008 model, so that might be why. His newer blades also have just two screws and the pivot screw holding the G10 scales. You may have a collectable! Your G10 scales also looked courser than mine. Very interesting. Awesome knife though! Thanks for all the reviews. Keep up the great work!

[@444cchampion444]

Hey man love ur vids. Ur a great resource for knife users. I was wondering if you've ever had the Teflon on any of your Emersons rub or flake off. I'm sure they will if you use them for real work, but I was wondering how well it holds up as opposed to your standard "baked on" finish. Thanks, C

[@jeepnicc]

Also, if you practice w/ that wave feature, it's way faster than any auto could ever hope to be, plus, it's easier to close one handed!

[@LEADitOUT]

I see alot of people whining about the 154cm instead of s30v or d2. Why? 154cm has worked and proven itself in there aplications time and time again, it sharpens well and holds a good edge, why change what already works. new fancy blade steels come and go.

[@sherman614]

I just ordered the newer Horseman with the standoffs, really looking forward to it!

[@nls8520]

Great review as always. But how can you tell the difference between 4 to 5 ounces in your pocket?

[@robinsonelizabeth]

@nutnfancy thanks anyway veri but nutn should think about it pros.small light easy to carry good sheath 440c blade tactical finish cons.doesn't have allot of reach

[@richwatson6203]

Try out the horseman mini cqc 8

[@matthias66]

Hey Nutnfancy, Does this Emerson CQC-8 have any under pocket clip issues, you know, like Cold Steel, with their aggressive texturing under the pocket clip?

[@TheseusTheDestroyer]

This knife looks like a scimitar! From the geometry I see I can see that it would be excellent for stabbing and cutting! You should review some Karambits Nutn!

[@Stessler30]

I know you have mentioned this in other videos but I forgot. Can you send a knife to Razors Edge for sharpening and if so how do you contact them?

[@PaulTannahill]

I like my CQC-7, and want to regrind the edge. Got info on how to do that?

[@PatrioticSlaughter]

Got my CQC 8 in the mail today. I am very impressed with the quality of my first and definitely not last Emerson. For some reason I still think I prefer to carry the Spyderco Military as my self defense blade though.

[@razor12516]

@vrsca89 I am debating a CQC 8 or CQC 15 for my first emerson too.

[@mgusty]

The CQC-8 should go on the nutnfancy specials page Bladehq.

[@pietrogiovanna]

Good video, thanks. Good luck using a file to grind that 154CM steel bro, I tried that on a Horseman (mini CQC8) and had to use a Dremel tool, yeah I know, you were just making a point, a good one by the way: the jimping sucks (on both). The spacer in the back is made of G10. The liners are Titanium. The pivot screw is easily adjusted in the field without wrenches, I use the rim on a 5.56 case, or any other, it works; just saying. Thanks for reviewing this Nutnfancy, I love Emerson knives.

[@ReclusiveMountainMan]

You're right. My coworkers call my Emerson Karambit the "bear claw." Wicked fast and compact. You can also throw punches while holding the thing. great for self defense.

[@bosborn1]

Would any custom knife maker be able to correct the grind on this knife. BTW the Chisel grind is what keeps me from buying Microtech.Right now I am considering this knife or a Microtech SOCOM Elite. The thing that also kills the SOCOM for me is the darn tip down only clip.

[@osprey308]

What a great blade! If there was a model with half titanium handle,like the cqc-12-csfs, that would make it a near perfect knife.

[@mongomondomongo]

I think Emerson should upgrade the blade steel for their asking prices. 154cm is great, but most other companies offer D2 or S30v when you're paying over $100.

[@Bohica173]

I've had a few issues with this knife straight out of the box. The blade is pretty difficult to flick out, and when flicked out firmly, the liner lock locks up very tightly and is very difficult to disengage. I was wondering if some lubrication is required. Has anyone else experienced these problems?

[@Tux3d0]

How come in some of your videos your voice is deeper than others? Just backround noise or the mic on camera?

[@nutnfancy]

@mongomondomongo I forgot to tell him! LOL I'll try to remember... - Veri

[@bluedogguy]

Hey Nutn - love your videos. Keep making them. But you have to mention the titainium liner! There's your strength on your liner lock! Otherwise, nice job.

[@Kappi011]

i just bought this knife for my first emerson and the loner lock is rediculously stiff to the poin where i can barely diengage the lock my thumb is raw i was just wondering if anyone else hashad this problem and if so how did they fix it... should i send it in to see of they can do anything or is it just a break in period?

[@aaron5544]

i have the mini and its alright but to my liking doesnt cut as well as the large and more structured version

[@robinsonelizabeth]

hey veri could you ask nutn what he thinks about the boker ma2

[@marcusonlife4074]

Hey Nutn you said in this review that this knife couldn't be considered high value because of the price (although there's more considerations than price when it comes to "value") but what do you think about hooking into one of these nowadays at around $260, should I even consider it?

[@GenKraid]

@Falsitive Hello, I am Kraid on USN, JD, EDCF, CPF, and BF. I've owned 3 dozen Emersons (approx). Now that I have established that I have a degree of knowledge, let me say that the pivot is intended to be "thumbnail tight" (stop before you hurt yourself). If you tighten it beyond that, the knife will have a hard time opening. Less than that and you'll have blade play. It was designed this way so that military members (such as myself) can adjust it in the field with no need for tools.

[@atlgentlegiant]

Nutn, you really should update this video with any new views you have after talking to Mr. Emerson at SHOT show. This knife is on my wish list.

[@Gandalfcosity]

Why didn't you mention the Emerson wave feature?

[@GenKraid]

@applevalleyjoe You should check out the SUPER CQC-8. Opposite direction, but you just might like it!

[@mongomondomongo]

@nutnfancy He's still using "show stopper" as if it has a negative connotation in his newer videos :(

[@nmr405]

you should review a Strider knife. maybe the PT, PT CC, SNG, or SNG CC

[@commando25101]

im torn between this and Eikhorn POHL ONE with wood inserts.

[@KBar666]

Do you have a review of a CQC 7?

[@xcofcd]

which emerson should i get first the CQC 8, CQC 15 or a commander?

[@Iamthedudeman00]

You didn't mention the tight pivot it just comes out the factory.

[@guusdejong2523]

If I buy an emerson it'll be a cqc-7. Not sure if waved or not. Maybe a waved cqc-7 and a non waved mini

[@barehandedbearhunter]

Any thoughts on the spyderco endura emerson?

[@Kylef7735]

@aznpos531 My guess is that they are more secure and strong in the tiny sized screws used in the knives.

[@rafterrs]

I am getting a Super CQC 8, oh yes! Take care and have a nice day man!

[@nutnfancy]

@robinsonelizabeth Sorry, I asked but Nutn says he is unfamiliar with that blade. -- Veri

[@albi131]

@locosway Blades and handles are good but I've heard really bad things about Emerson's liner locks.

[@SpydieFan]

One great Blade, I am up in the air on this knife or the CQC-13 for my favorite Emerson

[@deathfromabove555]

I really want some Emerson knives but i just don't have that much money to spend on that kind of stuff.

[@nutnfancy]

I'll tell him, ken, thanks!! -- Veri

[@bikesgunsandknives]

Sweet I've been waiting for this one.

[@jonconsiglio]

sixteen34 & Bohica173 The stiffness and lockup is exactly how you want them to come. All of my Emersons and Striders are/have been like this. Don't do anything to it until you've opened and closed it a few hundred times or more to break it in.....kind of like a nice 1911. Don't lube or do anything until it's completely broken in, then correct if there's still a problem. Check the forums about this and Strider (I know we're talking Emerson) has info on this in their FAQ. Jonathan

[@EnfinityTech]

@nutnfancy Who reground your edge?

[@razor12516]

@aznpos531 Torx and hex screws discourage disassembly and look cool.

[@pharmakon11]

Do the SOG seal Knife! I love mine.

[@GregRyman]

While the Emerson knives are expensive, they will last forever. So instead of buying a $10, $15 or even $20 knife every year or two, you can purchase one Emerson and be done with it. I've EDC'd my CQC7 for 13 years, and it still works perfectly.

[@PatrioticSlaughter]

@Kylef7735 It can be done with the zip tie mod

[@mongomondomongo]

I finally got a reply from him. He apologized and fixed my problem. It's really annoying having to wait so long, but I don't think he was trying to cheat me. Just don't expect quick service when you order.

[@Tactical_Fatty]

Number One Video on my TNP Trail Blazing Video Adventure!

[@Verilioness]

@robinsonelizabeth I think just the question peaked his interest. You know Nutn..he'll probably check it out now. =)

[@GenKraid]

The pivot screw is designed so that you can tighten it with your thumbnail. Or a coin. You do not need a special screw driver.

[@evankoeve]

Great vid sweet knife

[@poolplayer2093]

anyone know where i can buy one of these?

[@GregRyman]

@albi131 I've heard people worry about the liner lock, but I've never heard of one failing. I trust mine 100% and it's never given me any reason to think it would fail. I've some really bad things to my knife and it just works. I've seen Kershaw blades bend really badly and not go back to normal, but my Emerson just is solid.

[@SuperRip7]

I really like the choil.

[@robinsonelizabeth]

@Verilioness thank yah for asking

[@triplez300]

for the price I would go for CS Large Espada ! and will get duracoated by up armoured knives ! ;)

[@BlkREPR]

Review the A 100 good sir

[@robinsonelizabeth]

hey veri could you ask nutn what he thinks about the boker ma2 its 20 bucks at true swords.com

[@hunterdka]

MORE EMERSONS PLEASE

[@6leafdom]

do i understand why some ppl hate liner locks....but a properly made liner lock will never fail u lol....unless u are fighting ironman or soemthing....otherwise i don't see why u can't stab through stuff with it =P

[@mongomondomongo]

I've been trying to call them the last 3 days with no answer. They don't reply to emails either. As an experiment, buy something cheap and then try call them to cancel the order or get a refund. He doesn't answer his damn mails!

[@SwagginPenguin]

Yeah I wana see him review a karambit

[@ImageLoX]

Oh man. You sharpened the clip side of the knife...yes it's a conventional V grind but it's still a chisel edge. When you sharpen the clip side it voids the warranty(so I've heard). The knife is chisel edge so that it's easier to field sharpen (on a rock if need be) in less time. The brute history with "the father of tactical knives" Emerson is crazy. These knives are made to hunt the top of the food chain. True warriors knives as proven by special forces units all over the world. British SAS still carries this knife. Emerson was approached in the 1980s by Seal Team 6 with a request for a knife(CQC-6). The seals are the ones that asked for the wave feature that was originally designed as a "blade catch" for knife fighting to protect the top of the hand and only later did they find out the wave made it deployable from the pocket. The seals requested the chisel grind and the flat head pivot so it can be taken apart with almost anything, coin, flat piece of metal, another knife...