Engraving TIPS and TRICKS | How to ENGRAVE Stainless Steel TUMBLER

[@TriadoCustomEngraving]

Thank you guys for watching. Are you new to rotary tool engraving, if so what questions do you have and what would you like to learn?

[@alanparadis5061]

Im using a small Dremel 2050 with fair results, I'm able to upgrade but not sure what to get... do u recommend the Dremel 4000? What are you using? I hear you say in the video but I can't make out the name exactly... thanks for the vids and keep up the great work!

[@TriadoMax]

@@alanparadis5061 Hey Alan, Merry Christmas! I own two Dremels, 3000 and 4000. I started out with 3000 and it did great. I upgraded to 4000 because it has a bigger motor. If you want to upgrade I’d go with 4000 with the Dremel flex shaft attachment and a multi chuck for easy bur swaps.

[@ИринаПрисакарь-и3р]

Максим,ты молодец !!!

[@TriadoCustomEngraving]

Спасибо тетя Ира!

[@andybyron1]

So so cool dude, amazing work

[@TriadoCustomEngraving]

Thank you very much Andrew!

[@alanparadis5061]

Very cool!! Nice job and an inspiration to try again, ive done 3 cups so far, thak you for sharing your skills!

[@TriadoCustomEngraving]

Hey, thanks Alan!

[@CorneliusCreations]

Another amazing video!!! Love the tip about moving the cup around that way you wont rub off the carbon transfer.

[@TriadoCustomEngraving]

Thank you brother! I definitely needed to follow my own tip because I erased some of my tracing but that’s how I came up with it in the first palace haha

[@melissamccoy5243]

It's nice something new and the lines were crisp I love the art work you used.

[@TriadoCustomEngraving]

Thank you Melissa! 😃

[@IntanzHandmade]

Thank you for sharing! Very clear explanation. Great job!

[@TriadoCustomEngraving]

You’re very welcome! Thank you for watching 😃

[@heckmancs]

Beautiful work, amazing detail.

[@CorneliusCreations]

He is awesome!

[@TriadoCustomEngraving]

Thank you Chris!

[@TriadoCustomEngraving]

Thank you Matt!

[@markcoates4062]

That was a brilliant video to watch! Really enjoyed the tutorial on straight lines!! 🤩🤩🤩😎

[@TriadoCustomEngraving]

Haha I’m glad that you liked the video! I always get asked about how I do straight lines so I figured I’d put that in this video.

[@Ashtizzle70]

Nice job! Looking forward to doing my own mug

[@TriadoCustomEngraving]

Thank you Ashtizzle!

[@PENFOLD1962]

You made a great job of the beaker. I prefer the directional filling in, not the scribble method that lot's of people do! Very professional CONGRATULATIONS 👍😷👍

[@TriadoCustomEngraving]

Thank you very much, happy holidays!

[@PENFOLD1962]

@@TriadoCustomEngraving Merry Christmas and a very Healthy New Year to you and your family 👍😷👍

[@TriadoCustomEngraving]

Merry Christmas and a happy new year to you as well!

[@ClevesBackyardWoodworking]

Great video and tumbler!

[@TriadoCustomEngraving]

Thank you buddy!

[@tatianaarmand1806]

Great job 👏🏻

[@TriadoCustomEngraving]

Thank you Mom! 😃

[@CoolDude-ip9no]

Brother, another masterpiece..great job 💪💯✅👏👌💥💢

[@TriadoCustomEngraving]

I appreciate it and thank you for watching! 🤜🏻🤛🏻

[@alexondr762]

В конце гравировки присутствует ли какая-то обработка поверхности? Потому что у меня после гравировки микрофибровая салфетка сильно цепляется за края. То есть за какую-то нежную ткань может зацепиться и наделать затяжекю

[@TriadoCustomEngraving]

Здравствуйте Александр, вы можете использовать полировальным кругом или резиновую полировальную насадку. Я думаю, что вам также необходимо сменить используемый вами бор, чтобы срез был более гладким. Я использую круглые боры Fox Germany из карбида вольфрама, и они отлично работают. Надеюсь это поможет!

[@alexondr762]

@@TriadoCustomEngraving бор тоже из карбида вольфрама, круглый, но дремелевский. Ну и практики маловато, может потом, когда руку набью, будет получше. А резиновые насадки какие можете посоветовать?

[@TriadoCustomEngraving]

@@alexondr762 Да, со временем у вас обязательно это получится. Я рекомендую резиновые насадки Dremel 463 или 462, но вы всегда можете купить в Интернете более дешевые подделки. Просто поищите на Amazon насадки для полировки резины, и вы найдете множество их видов. Вам не нужно ничего слишком абразивного.

[@alexondr762]

@@TriadoCustomEngraving большое спасибо, посмотрю:) Удачи!✌️

[@TriadoCustomEngraving]

@@alexondr762Спасибо и тебе тоже!

[@etcher-art]

Looks brilliant my friend and such clean lines. Surprised to see the amount of dust that came off the cup in the background 😉

[@TriadoCustomEngraving]

Haha thank you! All that dust from just a few minutes, I kept vacuuming it every so often lol

[@meiganwinfield2139]

When you wipe away the excess dust do you have the proplem of wiping away the carbon paper outline too?

[@TriadoCustomEngraving]

Hey Meigan, good question. I usually use a bristle brush to get the dust off, this way it doesn’t get erased. Might want to wear some kind of dust mask since you’re lifting it up in the air.

[@marioalbertofloresmanrique2178]

Cuanto cuesta un vaso así grabado? Te quedan excelentes saludos

[@TriadoCustomEngraving]

Thank you!

[@tinabajande2443]

What type of carbon did you use for tracing your pattern,? Thank you and very nice your work

[@TriadoCustomEngraving]

Hey Tina, I bought carbon paper on Amazon about two years ago so I don’t remember exactly but any carbon paper will work. Mine came in sheets of 100 I believe.

[@isaiahbaca1062]

If washed alot does the paint chip off?

[@TriadoCustomEngraving]

It’s comparable to laser engraving so no not really.

[@isaiahbaca1062]

@@TriadoCustomEngraving thanks and great art you create .

[@TriadoCustomEngraving]

@@isaiahbaca1062 I appreciate it and thank you for watching the video!

[@giwangpvcartslamp1349]

Do you use turbo engraving? Good joo my hobby ia engraving

[@TriadoCustomEngraving]

Hello, thank you very much! I don’t have a turbo engraver. I currently only use Dremel with a Flexshaft as well as Foredom micromotor which is a brushless motor system.

[@rogervioletjr702]

I found where to buy the burs, but what size did you use? Thanks

[@rogervioletjr702]

I just re-watched your other video, found it there!

[@TriadoCustomEngraving]

Nice! Yeah I got the kit on eBay it came with several different sizes. I believe 025 and 019 is what I used, they are not labeled.

[@luisteofilosales7004]

What round burr size do you use?

[@TriadoCustomEngraving]

017-021

[@cricketts801]

Have you ever thought of adding a stainless steel dye to any of these? Looks great man Keep it up? Just saying paint it.

[@TriadoCustomEngraving]

Bro you read my mind. I was just talking to my dad about it. Is it possible? I’ve never used anything like that before.

[@RickMoreberry]

Extraordinariiiiooooo absolutly fantasssssticoooooo mate thank you very much for sharing your knowledge and technicks in engraving with all of us man I am already suscribed to your channel for keeping learning lots from you mate thanks a lot cheers from down under uruguay south america ta ta 😂😂😂😀😀😁😁😆😆😉😉😉😍😍😍🤩🤩🤩😘😘😘😮😮😮😲😲😲👌👌👌👍👎👍👏👏👏👋👋👋👋🙌🙌🙌

[@TriadoCustomEngraving]

Haha thanks Rick! You made my day 😃