tungsten carbide Rotary Burr test

[@seedubyu]

I am glad I have come across this video, A small pointy carbide burr is just what I need to get into really tight places that need rust removing prior to welding in a patch on my car. I have been trying all sorts to clean up the edge of a rusty steel part which I am welding the patch on to, 6mm drill, piece of old round file, filing with a small flat file but crikey its realy hard to get it "bright". But now with a small burr in my rotary tool I can FINALLY get it done. THANKS.

[@jer3335]

Thanks so much. Ive been totally confused, as a newbie to this, about what dremel bit to use to engrave onto metal, stone, stainless steel and shell......now I understand the difference between these bits much better ...lol. 👍

[@marioarvizu7077]

At least! a video showing the facts I need to know before select a Dremel´s tool. Thanks so much for it!

[@jessesilva4768]

Woulda been nice to have info or a link to the set

[@kevinroundsjr3102]

FYI the shanks are almost always a different material than the cutting bit.

[@jtbmetaldesigns]

Use the ball shaped one to carve wavy lines in aluminum plate then anodize the plate and dye it. BTW, if you clog up carbide with aluminum just give the bit a bath in 25% lye(sodium hydroxide) solution and your bit is good as new

[@chesshooligan1282]

There are several materials other than diamond with hardness higher than tungsten carbide. Examples are silicon carbide, boron carbide, and boron nitride.

[@javapua]

I'm thinking of buying, now i know which to choose. Thanks for this very informative demo. 👍

[@C9Aimtohead]

What do humans use this tool for ?

[@time2cclear]

@@C9Aimtohead me , i use these for wood carving . stuff like this kzbin.info/www/bejne/hpzOq2iQoMmNfs0

[@NicoLeminus]

Pour vous faire parler et sa a bien réussi

[@mark261166]

Thanks for taking the time to post, Iv'e learnt something.

[@testingbeta7169]

thanks for the priceless information, much appreciated

[@mytube2013]

testing beta7 but i want to know the price

[@bhupindershakya4635]

why we use tungsten rather than titanium in bits

[@jayc3110]

Thanks, it would have really helped if you could have linked to these b u r r s. There are hundreds of manufacturers of similar b u r r s. Which ones did you buy?

[@jaromir_kovar]

I bought two sets (diferrent shapes) from two random Chinese dealers via Wish and they are both just like this. I reckon there are not huge diferrences (if any). If you'd buy a brand name it would be diferrent story of course but I am very happy with those I got.

[@joebelichio6974]

I need to grind the head off a badly rounded off 10mm bolt thats in a recessed hole in a very tight spot on my engine. Would carbide burrs used with a dremel be able to grind the head off the bolt? I cant cut it with a cutting wheel as its in a recessed hole. I cant drill it bcoz i cant get a drill into it. A dremel is the only way i can get into it.

[@Healing556]

Whats the price of burs in carbite sets.?? The bigger set ? Plz Reply fast !!

[@JoseHernandez-cq6ie]

Where you get the dremel

[@lupalupa5153]

Mata bor itu bisa buat ukir kermaik tdk om

[@juansarmiento4180]

Eso sirve para esculpir piedra?

[@melancholyme5708]

Am planning to buy please recommend the mini rotary machine

[@pabitramohangayan1482]

Felt glad to watch such a nice demonstration. Pray tell me if I can use them in carving wood for images. I am a new learner being interested in it.

[@joostborst]

Yes they are excellent for woodcarving

[@jimboniface7202]

the bigger ones I would never buy again. They are brazes onto mild steel shank. They easily bend out of round and then snap off

[@harianto7381]

Mas itu bor belu berapa apa merknya

[@hectorrubio3152]

Please link site web the product ?

[@keykey1401]

Can i carve agate stone with tungsten?

[@Barnaby_bo]

These ok for wood?

[@shantilalkotia3274]

Full set prices

[@uvaldotrevino167]

donde podre conprar un guego de tuxtenos de edos

[@gerardomarquesdelima1094]

amigo por gentileza como faço pra adquirir esses jogos de limas rotativa pra usar na minirretifica?

[@valterleao6795]

Show de acessórios!!! Abraço aqui do Brasil 🇧🇷

[@filipenegreiros9557]

Fura porcelanato?

[@Signal-20]

does anyone have a link to buy these. or brand and model. thank you in advance.

[@a1lq]

How can i get it from amazon?

[@awadhnathsharma7860]

I want to buy so how to buy 🤔

[@toninhoartesao1454]

Oi amigo onde encontro essas fresas. São muito boas encomendei pelo mercado pago mas veio dessas pequenas e eu preciso para esculpir madeira. Por favor me informe. Fico grato.

[@Marcover4831]

Hi. What brand oś that?

[@codyjarvis3426]

Very good lesson brother , thanks

[@antoniofreitas6606]

boa noite como comsigo comprar desas ferramentas

[@mosquitoskeet2189]

So I'm assuming since glass is no problem, I can cut stone with these tungsten bits?

[@josebagayana]

Wooow have not try it to cut glass and metal, I only used it on wood, thank you for the info, ❤️👍👍👍

[@vigneshwarnaik4065]

Order link plz

[@hamedzandi3827]

What’s ur machin. Name. Thnaks ??

[@kdkofon5366]

Dimana blinya

[@oreodiamond1360]

Where did you buy those tools

[@marlonromero6824]

ICAN USE THIS INTO BONSAI TO SHAPE THE TRUNK 0R TO MAKE HOLL 0N THE TRUNK??

[@SirDrakeNewcanon]

Where you bought them? Can you write me the url please!

[@echielrubio6961]

How much

[@sukadevlalmahilangsukadevl8305]

पत्थर मे उपयोग होने वाले बडा़ साइज़ के की बीट के बारे बताए और लकड़ी वाले बीट के बारे में बताएं

[@sontosharijan52]

Ai mesinta kothay pabo jante cai aktu kosto kore bolun

[@VinodKumar-bx5ki]

Price please

[@juliagayyad7715]

How much,reply ,i buy one

[@askur5906]

beli dimana alat ini berapa harganya ?

[@ranggaelsa5168]

Bisa beli mata bor nya,,,,,???

[@whywouldyoucareaboutmyname6610]

What brand was this carbide rotary set?

[@josealfaro6089]

En Amazon tendrán esta erramientas yo busco esto en lugar Serca en california

[@srkhansrkhan1431]

ډيرښه زبردست بيلکول ښه کار کوى

[@atlashenriquez8940]

Esas se la puedo poner aúna truper y a la dremel....díganme porfa

[@juancarlosbenavides5964]

No tiene el link donde las puedo comprar?

[@terryhk99leung36]

Thanks so much for the test

[@MordecaiStudios-J3]

Thanks for the good video I have subscribed to you

[@raviravikalpana6923]

Hi sir tools set price please

[@charlienorway]

Can you drill hole in the metal on the seat belt metal that you click in the lock??

[@nicksteur]

yes

[@manoloramirez6456]

O wow good video where you buy

[@raghunathray800]

টুলচ বক্স গুলো কোথায় পাওয়া যাবে

[@raghunathray800]

আমার লাগবে

[@raghunathray800]

নাম্বারটা দেবে

[@green_building]

this video save me.. 😎👍👍 Nice test and review

[@blueckaym]

Nice! So I can use these tungsten carbide bits to drill (or widen) holes in aluminium more than 3.2mm (perhaps drill a ~3mm hole with a regular drill bit, and then use a conical tungsten carbide to widen it to needed width, like 5mm and 10mm in my current use-case) ?

[@Andrew-my1cp]

I have the same question just in my case I'm looking to use steel.

[@blueckaym]

@@Andrew-my1cp , as far as i know steel is easier, while being harder than aluminium (but nowhere near tungsten carbide) steel doesn't gunk up on your bits as aluminium does when worked with finer bits with higher friction (ie heat).

[@Andrew-my1cp]

@@blueckaym oh okay. But the bit can cut both materials right?

[@blueckaym]

@@Andrew-my1cp , tungsten carbide is much harder than aluminium, steel and also hardened steels, so it wouldn't have trouble with cutting thru them. Also these bits should live much longer than regular high-speed-steel (hss) bits. Just if you're using them on aluminium try to use the lowest speed to avoid overheating the alu and getting it gunk over the bits.

[@orsonimichel5629]

blueckaym n

[@zoozolplexOne]

Cool demo !!!

[@andrescirulnick2307]

Yo las tengo! Comen acero de hasta 6mm espesor y ni una marca tienen, no se desafílan son excelentes!!!

[@aaronvil7340]

Hola, donde las conseguiste?

[@andrescirulnick2307]

@@aaronvil7340 de donde sos? Yo las compre no mercado libre en argentina. Son tal cual las del video.. Y la calidad es excelente me salieron 1400 pesos algo así como 22 23 dólares .

[@aaronvil7340]

@@andrescirulnick2307 soy de México; son de alguna marca en especial?

[@andrescirulnick2307]

@@aaronvil7340 no no son chinas tienen unas letras chinas en la tapa, yo las compre con desconfianza pero son durisimas y económicas muy buena calidad.

[@hectorrubio3152]

Puedes decirme en donde compraste las puntas pequeñas de la cajita transparente y su numbre? Porfa

[@EugenePadul]

San mabilihan

[@robertgotschall1246]

Great. I was just wondering about these things

[@daviddavies6844]

YES SIR.THANKS REALLY INFORMATIVE. DAVID

[@40mick]

Great demo suggest gloves when cutting glass

[@4rever]

where i get this all items

[@viengiang3734]

How much?

[@douglashunt7057]

Where do you buy those bits?

[@eveliogonzalez9108]

Si das estas instrucciones en español te lo agradeceria

[@jyothik2542]

How to buy this please tell me the tool name Or product link

[@sattarabdillah389]

Belinya dimna mas mata bornya

[@bluwng]

I need to open up up an existing rectangular route in a guitar by 1/4 to 1/2 inch on a guitar and a router tool is way to complicated an a Dremel with a plunger and router bits is to big, would one of these work?

[@Rootpuma2.0]

mark out what you need to take off....dont get close to the line with these tools....but close enough....finish with sandpaper and not a rotary sander...finish by hand and up the fineness of paper for a good finish

[@soprano2469]

Hello can anyone tell me which drill bit is ideal to widen a metal hole?? I have a 8mm hole I want it 11mm wide what do I use??

[@Rootpuma2.0]

an 11mm drill bit...🤷‍♂️

[@philipedwardcaddick4294]

These bits are not designed for glass they are more for wood ,bone and other soft materials carving whereas glass bits are coated with diamonds.

[@markhorshahx]

Where can I get these bits n motor with it

[@HoudiHoudi]

Thanks

[@muhammadawaisweaponswooden9748]

Please Pakistan Lahore Price $.?

[@darkelyaz]

Thank for tutoring...i need this to repair my chainsaw bolt.

[@melancholyme5708]

Good luck 👍🏻

[@alwaessurius8498]

Great on glass and metal, but can they be used on wood?

[@TheJofrica]

I wood think so

[@wongamanda6296]

can use on wood. we are a tungsten carbide Rotary Burr factory with 17years experience, If any inquiry, welcome to email me at [e-mail]

[@adefirman4602]

Harga brapa

[@agusdwiatmono7246]

Mau nanya lengkap harga nya berapa & belinya di mana ? .

[@mintomarma6827]

I need this once,,, how can I get this machine

[@deepversion7953]

Ebay or amazon .... or depends where u are from

[@annaoaulinovna]

tunsten carbide is awesome.

[@jhonescobar3437]

Buenosdias megustaria hacerme esa brocas

[@ChandraMCraft]

Thank you....

[@samiruislam9678]

accha ami jodi nitechai to nite parbo ki

[@jhonescobar3437]

Hola soy de colombia y deseria otener esas brocas

[@noemeza4968]

Quiero conseguir esas puntillas

[@seniorxj2931]

The fact that you chose brass to show off these bits is enough to tell me not to buy them!

[@saipoel8431]

Maaf,kalau mau membeli alat itu bagaimana caranya dan dimana?

[@yayannuredi2721]

Bukalapak ada. Tp ga tau. Ori apa engganya

[@robertlangley258]

Thank you for this video, you rock.

[@0517mshumer]

How do you deal with chips? I did some die grinding for the first time on my airstream frame and was covered in razor sharp chips. Fortunately i was outside and wore eye protective gear and a nylon jacket. Hands got several embedded splinters.

[@Dicknballz52]

Wear a long sleeve and seal your wrists/gloves off with rubber bands so the small pokey bits wont fall in there. Learned that from fiberglassing. My left forearm is the only place that gets it hard enough to hurt/poke in mostly because I hold everything with it close so I usually just cover one arm up and use one glove. Try to angle it away from you. Use a loofa with dawn to clean up, tweezers to pick em out lol. Use a strong neodym magnet to pick chips off yourself as much as you can, brushing/rubbing them off will stick you some. You can also set up magnets to catch the chips if its magnetic metal.

[@JamesSmith-lt5zz]

If you have a air compressor blow yourself off. If you dont get one. A used 6 gallon pancake one can be found all day on Craig'kst 50-60. And those 3 gallon 100 psi ones $30-40 new only good for inflating and Dusting things off . But those 6 gallons panckes ones can do more then people think. I can run my small touch up paint gun. Auarita mp 101 and if will cycle off and run sprayit sp33000 lvlp gun intermittent. With some catching up. Air compressor is a must have with grinding and sanding can never dust off the piece to much before paint. I can't do 220v here so I parallel 2-3 compressors from Craigslist or a good sale. 26 gallon kobalt, a 6 gallon Porter Cable right now. Combined is 7cfm @90 12@40 I have a T fitting and run both compressors to a portable air tank. 7 gallon from Lowe's. And run mt line from there. Both are 150 psi compressors. If they weren't I'd inatabll a one way ball valve or lower the regulator on the higher compressor when I have a 3rd on one thats llower 40 gallons of 150psi and nearly 3hp in motors. I can paint a car straight through without stopping. For $300 can get 2 harbor frieght 10 gallon 5.5 cfm compressors for and have 11 cfm at 90. Your basic entry level 60 gallons run 10-13 for twice the money. Just use separate breakers

[@billlee1724]

James Smith awesome tip man, I have a single 6 pancake but have been looking for a cheap way to upgrade and that is it!

[@ЯКомфи-ь4з]

Где можно купить эти насадки.

[@rusavolk]

nice review.

[@furkanyagc6975]

Bunları nerden tehmin ede bilirim link falan atarsanız sevinirim

[@MCsCreations]

Pretty nice, dude! 😃

[@joseerivaldomonteiro1299]

Como comprar este quite

[@MCsCreations]

@@joseerivaldomonteiro1299 Às vezes você encontra esses kits em lojas de material de construção. Ou compra da China, pela Banggood. 😊