3500 Watt Electric Stand Up Paddleboard

[@MrNick-]

I’m actually impressed with that speed!

[@EOLAND99]

18km/h :)

[@cromagnon2620]

On a wakeboard and you in business

[@joaquinperezruz6946]

Buenas ,tienes al gun vídeo de cómo lo haces y el tipo de motor?

[@Smokey00]

This would be awesome on the bottom of a kayak

[@Gino.]

I want one for my Oru Kayak! Definitely 👍

[@dirtyhooker6317]

Faster on a paddleboard but you'd be the quickest guy to the spot(not including boats and jetskis)

[@kristof990]

Where se you a kayak?

[@CAMPONIA]

Too see guys like you doing this kind of things instead of drinks and drugs giving me a better hope for the future 🙏🙏👍👍

[@beboshi69]

I do both

[@macbook802]

Drugs are cheaper, especially since inflation

[@E620SE]

@@macbook802 don't think so in the long term

[@TheTeeDay]

We do that shit too bro

[@TriumphAventura]

I cannot stop getting impressed on how much power those batteries can provide...and that tiny motor wow

[@EOLAND99]

I know it's crazy. And I only used one third of the power that the motor is capable of. I tried out 12S and got to 25km/h but after a few seconds the voltage of the batteries was too low and the cables got hot. I think that a dual motor setup would be the best way to go so the controller doesn't need to be so expensive.

[@TriumphAventura]

@@EOLAND99 kudos, I loved it

[@peterkay7458]

Best example I have seen of simple elegant applied engineering. Thanks for posting and for listing the parts.

[@ch1ckenphat514]

That's a wicked start to a build! Second model should have a remote built into that paddle, would help tons.

[@EOLAND99]

Thanks :D Definitily. I thought something like a thumb throttle for ebikes on the paddle would be confortable.

[@Phrancis5]

I've been building FPV drones for years now and just started learning how to SUP. Looks like this could be a way for my hobbies to converge...

[@topofdastands]

You are one smart cookie. Loved this video. I would have laughed a bunch if you wired them in series.

[@TheTonester2312]

I was wanting to do this with my paddle board! Amazing work, man! 💪😎🔥

[@colomacountry]

All you need is a foil board and a water proof controller. That's a really fun looking project!

[@SCM]

Really love the simplicity of the implementation. Motor instead of fin, very nice!

[@peterkay7458]

EXACTLY...KEEP IT SIMPLE STUPID....better to ride briefly on a nice simple design than having something on the drawing board for five eyars like that efoil idiot

[@DavidLeach1]

This is radical! I want to try this but with my own (self made) board! At first when I saw you putting the small propeller on I thought “oh this isn’t going to go anywhere”, then you scooted around the pond a dozen times lololol

[@EOLAND99]

At first I had a 70mm propeller and it was too slow :) I was not sure if the fin attachment point is strong enough. But I can hold my weight and won't rip off. I'm still waiting for new batteries but for the next video there will be some improvements and I will record the speed on GPS.

[@fokkebuter9463]

This video is getting recomended for a lot of people😂😂

[@MrWhatdaheo]

Wow 😳 thats amazing dude. I can’t imagine how fast it goes 👏

[@jpindahaus]

This dude's my hero!

[@anguscameron561]

So much faster than other electric fins on the market- boost fin and blue ray- you will smash crowd funding

[@Carcajoo121]

Good thrust , pretty impressive ! 👍

[@rrandydduke]

Good job buddy ! Always fun to build stuff out of hobby parts ! My 17 pound model electric boat has a single 8400w brushless motor . You could get really crafty installing model boat stuff on almost anything.

[@EOLAND99]

Oh yes I will :D and if one motor is not strong enough I will try a double propeller configuration.

[@rrandydduke]

Despereaux why not use 4 smaller less expensive systems ?? 😉=. kzbin.info/www/bejne/jGa2m5mMediFpdk

[@chickensnickers]

Aquaman! -or McGyver? AquaGyver! Nice work pal

[@growlith6969]

Awesome video my man! I'm about to just fiberglass in an outboard mount and front lanyard eye onto a board and give that a shot. The way I figure it, having a lanyard to hold like a ski rope in one hand and the the tiller handle (actually the handle extension) in the other, I should be able to keep balance and effect turning better by simply turning the engine a few degrees.

[@dillee9988]

Yip, I like it! It definitely beats paddling. I might have to waterproof the remote control, and try and get some steering.

[@edshelden7590]

How waterproof are the batteries in the battery compartment? These batteries can be very very dangerous if they get wet.

[@graemegladman]

Wow this is so good. The fastest easiest e- Prop setup on KZbin.

[@jimmorrison9319]

If you could integrate the controls into the paddle, you could use that for balance if it was a long double handed kayak paddle

[@edwardjweber701]

Sounds very unique for electric power. I like this. Great job. I envy your engineering skills.

[@Pedroto3]

This is actually insane!!

[@titfortat5727]

That's really cool.. I will keep watching your progress and try to if I have enough time! 👍

[@frannelk]

Simply a terrific toy 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

[@barleymoose999]

Dude I'm going to build and mount a similar power pack to my pelican catch 120. Sick!

[@EUC_DeathRay]

Finding a way to seamlessly combine the remote control and the oar would be a great upgrade

[@dku7325]

Nettes Teil, schöner Nebeneffekt das Geräusch ist noch beruhigende als der staubsauger, das Kind ist sofort eingeschlafen 😂

[@allanj4576]

Spends many hours designing an electric propulsion system for sup, manually inflates sup.

[@TheZororya]

Make them and sale them, paddle board it’s best seller in world. U seat for life man. I’ll buy one if u start good luck

[@icemonkey68]

Super cool. Nice work!

[@nkb051]

You are the man! WTF Love your construction! Could show some details how you built it and whats the construction like??

[@wonkylommiter6364]

Get your weight further forward on the board so it sits a little flatter in the water and I think there will be less drag and even more speed.

[@CamraMaan]

If it hasn't been said yet, you should attach your remote control to the end of the paddle, but so you can use either hand to control it or steer. Fun idea though! Makes me want one for my kayak! :)

[@Der_BARNI]

Du könntest echt einer von den Real Life Guys oder Mathisox sein 😂👍🏼 Echt cool wie schnell das Board wurde 😎

[@johnchan6191]

Wow, very awesome. It's faster than most trolling motors. W/ bigger battery, it'll travel further. Cool way 2 bring a boat, an inflatable board. Thx 4 sharing on Utube.

[@Name-cp5xh]

Very cool, next, rig a throttle to the oar.

[@juliocesarayala9283]

SALUDOS CORDIALES A TODOS DESDE PANAMÁ Y BENDICIONES PARA USTED Y SU FAMILIA. EXCELENTE INICIO DE PROYECTO, GOOD SPEED. 🤗🤗🤗🇵🇦🇵🇦🇵🇦😃😃😃😃

[@garycrossett1893]

Looks real fun, keep going could earn you some money 💰

[@michaellamy1096]

Wow impressionnant. Tu n'a plus qu'à trouver un moyen de pouvoir faire tourner l'hélice avec la télécommande. Bravo y a de quoi bien s'amuser avec ça 👏👌😉

[@ugemellt]

as someone who is used to getting towed behind boats and the dangers involved with being in water in proximity to a turning prop, i really suggest you should try to switch to an impeller design. a metal prop this big is quite dangerous and per design you are close to it in the water. don't get hurt!

[@pierro281279]

Hey! I really wonder how to choose a good impeller

[@sharonbraselton4302]

buy yamhaß

[@HodgdonH110]

Yes them hand SUP pumps give you a workout before you even start paddling haha

[@cameranmanner4701]

Haha its true but it doesn't matter, once done he is off to the races paddle free. This thing is wicked for a small motor and prop.

[@Luftbubblan]

Looks fun. Perhaps some kind of smoothening of the accell and deaccell could do wonders for this :D

[@EOLAND99]

Yes I will put the acceleration to very soft on the controller. Maybe then people dont think I suck at Stand up paddling :D

[@danpearce1268]

Nice build, I'm just starting one now, got some big drone batteries and I'm using a bosh drill motor, hopefully that will be fast too 👍

[@BreezeoniPad]

Her: come over! Me: I can’t, I’m out paddle boarding! Her: my parents arnt home Me:

[@qswedasf]

Old and overused...

[@jeffccr3620]

@@qswedasf How do you know how old she is?

[@qswedasf]

@@jeffccr3620 Not her, this copy paste comment from the 90's. Its old and overused already.

[@scorporsupremacy7948]

I like the freezer to the microwave battery enclosure 👍🏽

[@drlemontea8267]

Cool....you gave me an idea..Thanks

[@martinhblake]

Incredibly fast 👍👍👍🔥🔥🔥

[@ianjazon]

this is very very empressive!

[@gargamelgargamel2483]

Genial !! Bravo , c'est du super boulot . Continue ....

[@writerconsidered]

You should design a small rudder to steer with. Also all that techno-gizmo stuff and yet you still hand pump it up? They do make electric air pumps for this purpose.

[@rafaelmercado307]

Dude, that's badass! I'm so gonna do some shit like this for me! Lol

[@Eden_M]

I love you build man, I'm working on a jetboard. Wear a life jacket man, if shit hit you in the face you pass out and drown.

[@brecbrac]

May God have mercy on him who did a job and mastered it

[@edshelden7590]

I’d rather see a jet pump drive rather than an open propeller. If the motor controller fails or locks up to full power and somebody falls off a really bad accident might result with an open propeller.

[@peterkay7458]

Ed so true. The jet drives seem to need a lot of design work. The durajet would be ideal

[@eric-qi1os]

That is a seriously dumb comment. Please stop commenting. You lowering the iq of KZbin.

[@D9VO]

Subscribed! Faster version PLEEAASE! :-D

[@АнтонВотрин-ш5ы]

Красавчик 👍ещё бы пульт в весло установить для удобства)

[@MultiMarty100]

JAYKAY E-Finne

[@k1ortia]

Awesome.... its given me an idea to do this with a surf board and 72v of 18650,s

[@sharonbraselton4302]

yeß

[@DanielKarathanasis]

Well done !! excelent video ... can you give us 1. how long the battery holds 2. did you buy all together as a kit or did you bild it by your self? 3. costs?

[@batziii8745]

This thing looks Not Like a kit. He says that the Motor draws about 160 Amps and those batteries look like 8 or 10ah. Im guessing it could last 30 minutes or so on Full Power. As for cost, my guess would be 200-ish. At least those are the cost for those componets here in Germany .

[@EOLAND99]

So my 220Wh lipo and one motor with 3500W you can have a maximum of 4 min of full throttle in short bursts. I use my battery only for testing not for long duration. I'm hoping to find a more efficient propeller and the voltage needs to be increased, so the Amp draw is not over 100A for more efficency. In total I think a selfmade version with a good battery can be build with 700-1000€ with the board included. Difficult parts are the Propeller adapter and the motor mount on the fin.

[@EOLAND99]

@@batziii8745 6S 10Ah batterie => 220Wh / 3500W = 0,062 h = 4 min on full throttle 23km/h 220Wh / 800W =0,275 h = 16 min of medium throttle at about 15km/h

[@theirishaxe9405]

Awesome build bro love the diy👍✌️🤙 I have the same sss 56mm motor in my xmaxx💪

[@EOLAND99]

Thank you :D that motor need a lot of cooling I guess.

[@theirishaxe9405]

@@EOLAND99 you should try a tppower 58mm! It will run cooler! With more power. Lower kv

[@manysrally710]

Sounds like some german engineering right there 🇩🇪🇩🇪

[@jerrysetlerr770]

This is exactly what I was thinking when I bought mine ....it's a little zodiac lots of sold square inches of floatation a little electric motor would be nice ....an e sup board for just touring a bit without a lot of noise and huge launching deal in the bays in the ocean .

[@sharonbraselton4302]

buy zódiàc eltruc jet biat

[@ruffus8039]

Good stuff. How about modifying the paddle to have the transmitter inside the handle. Would be easier to control. & only one object to hold on to.

[@barryp4700]

Well done, it looks like a lot of fun!

[@lukasq21]

Awesome. Can you share a manual or guidence how to build such engine step by step?

[@remkojerphanion4686]

I love this project, really cool! That 94mm prop is really big and will have massive drag. Considering this motor is 700kv, maybe a smaller prop with a greater pitch will allow the motor to spin faster and more efficiently. Increasing the cell count will do wonders also. Your motor can run on 18s, if I am not mistaken. As an old rule of thumb, a prop for submerged drive will have a diameter similar to the diameter of the motor, which in this case is 56mm. However, this motor is VERY powerful, so go for something like 70 - 75mm. The 56114 is also available in a 350kv version, which would be an even better option for this application. The 350kv version can take 130 volts, but requires a lot less current. Just a few thoughts...

[@Eden_M]

Hey man you are correct and its cool to see somebody with alot of knowledge summing all these details in one single comments! My question for you is can I measure amp draw with clamp ammeter on 1 of the 3 phase wires of the motor? My ammeter is AC only, can't measure current draw coming from the battery. Thanks!

[@remkojerphanion4686]

@@Eden_M I have never measured current using one those clamp meters, but it should be possible. Wattmeters are inexpensive and I find them useful. On my RC boats with submerged drive prop, I check the current draw with the boat held still to get an idea of what the motor is pulling and to make sure the whole package is not overloaded. Only then will I run the boat and experiment with slightly different diameter props and/or different pitch. All the while I keep a close eye on temperature of all components. I try to be methodical in my approach, for example taking notes for comparison later on. Stick with it Eden, and your project will succeed! Good luck!

[@EOLAND99]

Interesting. I think the 350kv motor will be better suited for 12S, but I will torture my 700kv motor untill it brakes. I tried a 70mm 4 bladed Propeller with 0,8*70mm Pitch (7008). It was with 6S and worked pretty good but I thought it was too slow so I made the video with the 9408 propeller. However I lost the propeller in the lake and now I'm waiting for a new 9412 propeller. Here you can see a thrust, power to RPM chart of the 7008 Propeller: ae01.alicdn.com/kf/HTB1GNXjTAPoK1RjSZKbq6x1IXXa0.jpg Here for the 7012 Propeller: ae01.alicdn.com/kf/HTB1I.pGTxnaK1RjSZFtq6zC2VXay.jpg Here for the 9408 Propeller: ae01.alicdn.com/kf/HTB1T.plTpzqK1RjSZFvq6AB7VXaL.jpg And here for the 9412 Propeller: ae01.alicdn.com/kf/HTB1yqlhTAzoK1RjSZFlq6yi4VXaY.jpg So with the new Propeller (9412) and 6S I hope its possible to tow a wakeboarder. Or on 12S to get as fast as possible, put some wings on it and 2x4kw of Air Propellors and motors and fly in ground effect...

[@EOLAND99]

@@Eden_M To messure Power of a 3 Phase system you need at least 2 AC powermeters. Its called "Aronschaltung" in german.

[@Eden_M]

@@EOLAND99 I ordered an rc wattmeter but I don't have it yet. I do have 2 clamp meter/ammeter, do you mean I have to use both meters simultaneously on two different phases of the motor?

[@54egg]

Awesome! I think I would want to attach the prop before batteries for some unknown reason.

[@EOLAND99]

You're right. NowI leave the propeller always on :D

[@54egg]

@@EOLAND99 Very good. I was able to come up with 7 reasons. One for each finger I still have! - - Ok might be exaggerating a bit!

[@peterkay7458]

Egg dude I was ready to argue then I kept my move shut and thought about it. GOOD POINT!!!!!!!!!!!!!!!

[@peterkay7458]

@@54egg LMAO NOT COOL but funny. I worry if water got in..with luck it stops, with bad luck it goes full or reverse....OUCH

[@JaredJacobsonLaw]

Awesome nice work please post if you Comb to any final conclusions that would be helpful. Seriously great job! Thanks for sharing

[@EOLAND99]

Unfortunately during testing in Salt water the ESC got wet and blew up. I ordered a motor with 360 kv and plan on using an 48V ebike controller to drive it. Hopefully it will be faster. I'm making slow progress and the propeller pitch is not ideal. There is a lot of room for improvement.

[@JaredJacobsonLaw]

Despereaux what’s up man? Find a set up that works yet? Just checking back in and came across your video again. Watched it with my son. He loved it and so did I. Please let us know any thoughts. We have a river close to our house and would like to put some type of motorized device into it! Either a SUP ideally could be used to surf in ocean also but not likely...and could attach motor to it ❤️❤️❤️ how u did it...orrr I would get a kayak and put motor on that. THX! 👍👍👍🙏🙏🙏

[@kevin347lee]

Build remote in the oar... waterproof battery box completely maybe paint the box .... you will be onto a great mini power board ... although find stronger batteries.....

[@Dattadreya]

Even if it went a 3rd of the speed fuck yeah man ✌🏽👌🏼👍🏼🙏🏽🏄‍♂️

[@jayesh5131]

That's awesome dude 😎

[@Carcajoo121]

Pretty wild ... kids got talent!

[@bbltd.3154]

You need electronic speed controller. Waterproof controller. And a way to turn. Excellent idea though!

[@patricksanders858]

Two keel skags on left and right just about where you stand. Mod your controller to the paddle.

[@goodtogrow7774]

He turns with his body weight doesn't he

[@bbltd.3154]

A way to turn FASTER

[@michaelschaller7572]

Wow that thing is frigging awesome 👏

[@michaelleady9089]

You might be able to take your dog tubing in that damn thing

[@sharonbraselton4302]

yeß yiú càñ

[@windsurfingatmeerwijck]

I love it... Bring it on the Market...

[@EOLAND99]

Thank you :D I will after a few iterations.

[@p.m.742]

Dude respect 🤘

[@pacman4568]

Holy cow a few tweaks and a little less power and you got a winner.

[@duybui4112]

I just build an 3d printed electric standup paddle board similar to this one, you can check it out at kzbin.info/www/bejne/f6PUZ3prodminNE . I include all the spec you need in the video description.

[@tiktocdrummer]

Would work better on a smaller board then Add some foot straps so you can control the board standing up. Very cool 😎

[@mariolcazevedo]

u are a genius!! Nice work!!

[@alaskaaksala123]

Very cool bro!

[@DIYjetboards]

Hey man nice build clean and simple and it looked wicked fast. I think you will be happy with 12s cause your amp draw will go way down. What size prop did you use? It needs to be inside a mortar nozzle to increase efficiency and also to protect the rider and anyone in the water from the prop. My first build had a prop and no killswitch and I have the scars to remind me of it. I use only jet pumps now as props make me very nervous. However I plan on building an e foil soon so your set up looks like it will work well fir an e foil you were planing as soon as you hit the throttle Nice job congrats on a successful build Cheers Frankie

[@EOLAND99]

Thanks :) I used a prop with a 70mm diameter but during a second test it unscrewed itself while braking and sunk to the bottom of the lake. So i ordered an 188mm diameter propeller since i'm not worried about the motor overheating. The pitch is higher but i hope it will work anyways without too much cavitation. I think a mortar will add quite some drag and my goal is to reach speeds over 50km/h. If i have a good working motor propeller combination i want to put is on a hydrofoil too :)

[@DIYjetboards]

Despereaux Well that sucks losing your prop. Next time drill a hole through the prop shaft in front of the nut and put a cotter pin through it. So 180 mm from 70mm big jump ....you looked like you were going. Pretty quick in this video 180 will either fly or shake itself to bits. But hey it’s worth it if it flies🤙🏼 probably too much prop for a hydrofoil though. If you want a great cheap hydrofoil kit check out clear water hydrofoils he has a wood black kit with mast,board mount, fuselage, and the front and rear wings for $139 usd I believe. You have to glass it all up and it’s a lot of fiberglass work but pretty cheap and since you will be modifying any foil you buy why not do all your wiring etc and them glass it into the mast etc . If you don’t want to do a lot of glass work he sells a foil that has an aluminum mast and fuselage and composite wing and foil and I think that’s about $550 usd so not too bad. I got one of the wood blank kits. As soon as I have finished the double pumper twin jet powered board I’m currently building then the hudrofoil is my next build. I should be testing the double pumper this weekend and I’ll post a video after the test food or bad lol. Looking forward to seeing your 50kmh board. Good luck Btw what inflatable board are you using. It’s very wide and short I like it🤙🏼 Cheers frankie

[@Trickydickysticky]

Just gotta add the throttle internally to your paddle.

[@JeagerTv]

That's friggin awesome 😎👍

[@zatoichi101]

You should SELL those!! I would absolutely love to buy one for my paddleboard!!!

[@Frisher1]

They exist, but they cost like 300$.

[@StrykerBuilt]

BOOST Fin boostsurfing.com/preorder/

[@lossantoscity3249]

@@Frisher1 this is quite an expensive hobby, 300 is cheap actually. If people have a problem with that price they should look for another hobby. "Or" borrow from friends who have one to enjoy.

[@Frisher1]

@@lossantoscity3249 Oh you tell me.

[@sorenweisshartmann]

Impressive. Really cool video. Thanks

[@derzkoeradio]

Really Awesome!

[@turb0brut]

This is awesome, i was drooling after a Onean carver (4000eur) board but this is way better and cheaper.. I just started OpenPPG, i could use the same batteries here as well !

[@leighharvey9150]

One point to be pedantic. You should disconnect the batteries before touching the prop. Fingers don’t grow back.

[@863Monster]

I actually saw a video a few years back where a guy regrew his finger using stem cell powder. Still wouldn't feel good to lose it in the first place tho 😅

[@stinkintoad]

If you produce these I will buy one for sure .

[@imridingwithstoopidohwaiti3948]

details on what motor esc you used would be awesome for us RC geeks...

[@EmilioExploring]

Looks fun as heck!

[@lisasievers8059]

nice job!!

[@G56AG]

That thing hauls! Not sure how long the batteries last, but it goes fast in the meantime. The speed controllers will shut down the motor if the battery voltage is below a set point to protect the batteries from damage.

[@EOLAND99]

The theoretical maxium of my setup with the 222Wh LiPo batterie is 3 minutes of full throttle. There is room for improvement with bigger Li-Ion batteries :)

[@daves3dstuff725]

Hi,danke für das Video!! ich habe mir jetzt auch eines gebaut. Mit denselben Komponenten wie du! welche Fernbedienung hast du?

[@Jpanic00]

vielleicht kannst du mir dazu ja Hilfestellung geben ????

[@EOLAND99]

Du kannst jeden beliebigen RC Car Transmitter und Reciever benutzen. Eine Plastiktüte reicht um es spritzwasserfest zu machen.

[@MR..2REAL]

Great job!!...the goldmine is right in front of you!!!...make it a sit down craft!!!

[@marcweippert7487]

Was kostet der Spaß insgesamt ? Board mit Finne Motor Lippstadt etc ?

[@transkryption]

Cool proof of concept I was thinking of maybe a 200W paddle wheel for a kayak. For longer battery life rather than high speed.

[@EOLAND99]

propellers are way more efficient then paddle wheels. If range is your priority then use a trolling motor and Lithium-Ion batteries :)