EPEver eBox-Wifi-01 RS485 to Wifi Adapter Review - 12v Solar Shed

EPSolar have released this new accessory for their range of solar charge controllers. This little blue box connects your RS485 enabled EPSolar / EPEver solar charge controller to your android tablet or phone. Once connected it allows you to edit your charging and load parameters as well as monitor how your battery and solar panels are performing using the android app.
I've made a follow up video here which shows you can use it with the Windows software too: • Hacked EPEver Wifi to ...
EPSolar App Download: www.epsolarpv.c...
I bought this item from: www.solarenergy...
This item is also available from eBay: ebay.us/tdT1Qo
❗️These links are affiliated and I may earn a small commission if you purchase❗️
It works with the following EPSolar / EPEver solar charge controller models:
LandStar B Series
ViewStar A Series
ViewStar BN Series
Tracer A Series
Tracer BN Series
eTracer AD Series
eTracer BND Series
iTracer ND Series
It also works with the following pure sine wave inverters:
SHI Series
STI Series

[@PaulPaid]

Best demo on the internet. Good to know Victron doesn't have the market cornered on remote Mobile monitoring. Thanks Adam.

[@Totogita]

As a customer support agent I used to have issues with them running rs-485 lines out doors because of lightning. Make sure the twisted paired is shielded for external use. Also a termination resistor of 50 ohm may be needed at the rs-485 end if you have issues with communication or running a longer line.

[@Ann-py5gu]

If this video wasn't ever posted I would have never know how to download the software. The instructions that come with this say nothing about how to download the app. Thanks!

[@stevetobias4890]

I have been through almost 10 SCC's now. Since spending the money on an EPEVER Tracer 4215BN I was able to connect my cells in 24v pairs and set them to 2s2p (4x 250w panels) finally I get the full voltage from my cells and the 12v batteries get triple the amperage they get at 24v (actually full voltage is 36-40) the controller has a max charge current of 40amp. I also have a Tracer 3215BN SCC (30amp controller) ready for my second solar system of about 780w max. Just waiting for more panels and batteries. Thank you for your reviews.

[@solarprepper1offgrid.753]

I bought this for my epever triron 421on. having trouble i have the epever app having trouble with the WiFi

[@CHOPSZOOKER]

Thanks for taking the time and making this video. I just purchased one of their Mppt controllers that has the wifi ebox with it to use on my campertrailer and your video helped alot with what to do with downloading the app.

[@AdamWelchUK]

Good to hear - thanks for letting me know. Happy camping!

[@stevetobias4890]

I would also look into the EPEVER eLog01. It connects to the controller then let's you connect a PC via USB cable and at the same time connect a MT50 (or Bluetooth module / WiFi module). You can also use USB extension cables if your PC isn't close by. An added benefit is it's ability to store about 3 months of data ready to download to your PC or laptop.

[@slash2314]

It may be useful just to use a cheap tablet or old phone dedicated to monitoring. I've seen tablets going for around 40-50 dollars on amazon.

[@AdamWelchUK]

+slash2314 Yeah I did think about this. I have one that might do the job.

[@immrnoidall]

LOL "i can't be bothered with these instructions" lol famous last words.

[@jcbdiggers1]

Iv got grandkids to show me how things work lol

[@hedgemcnorry9459]

The Epever Tracer 4210AN is going to be my birthday present :)

[@stevetobias4890]

I would look into the EPEVER eLog01. It connects to the controller then let's you connect a PC via USB cable and at the same time connect a MT50 (or Bluetooth module / WiFi module). You can also use USB extension cables if your PC isn't close by. An added benefit is it's ability to store about 3 months of data ready to download to your PC or laptop.

[@alzeNL]

having gone from android to ios has anyone got the app working ? mine just refuses to connect ! works fine on android

[@alzeNL]

got the latest app - took a 'refresh' (as shown in video) and worked in iOS - happy :)

[@MoooHamMad]

You can buy a secondary USB WiFi device for your computer or laptop and dedicate it to the eBox-Wifi-01, so you don't have to disconnect from your router just to monitor the eBox.

[@AdamWelchUK]

Yup- that’s a good option of you can.

[@davidhopkins]

Any update on this product? I recently purchased the BLE-01 and it does not work with my iPhone. I connect but no data transfers. I reached out to EPEver and they suggested I try it on Android. But their app is off the Play store. That does not inspire confidence.

[@silviopacitti465]

Do you know if we can connect the charge controller to the internet so see the settings and batt info remotely?

[@stevetobias4890]

I would look into the EPEVER eLog01. It connects to the controller then let's you connect a PC via USB cable and at the same time connect a MT50 (or Bluetooth module / WiFi module). You can also use USB extension cables if your PC isn't close by. An added benefit is it's ability to store about 3 months of data ready to download to your PC or laptop.

[@6969smurfy]

Does any body no why when open this in app (got the ble version) when I select ble in app it says: blue tooth 4.0 not supported? It scans wifi correctly. wish I went with wifi i guess...

[@wisalahmad1867]

Does this need wifi connection? Or work directly with phone wifi?

[@gunasagarsahu4750]

Can we store the solar energy data that we are getting ? and is this app available for PC also ??

[@stevetobias4890]

I would use the EPEVER eLog01 if I were you. I got one and it allows me to connect the MT50 and the PC via USB, it also stores about 2-3 months of data and has a button battery for backup. They are about 30£ but that depends on the seller. I cannot recommend it enough. Being able to monitor by the MT50 and the PC is a huge advantage. If needed you can use a USB extension cable or just buy a longer USB cable to suit.

[@jimthvac100]

I wonder if the Bluetooth version one wont have to disconnect from your wifi when ever you want to connect to it.

[@stevetobias4890]

I would look into the EPEVER eLog01. It connects to the controller then let's you connect a PC via USB cable and at the same time connect a MT50 (or Bluetooth module / WiFi module). You can also use USB extension cables if your PC isn't close by. An added benefit is it's ability to store about 3 months of data ready to download to your PC or laptop.

[@ZerHour]

very clear and informative videos clearest I think I've seen

[@AdamWelchUK]

+ZeroHour Many thanks. Quickest reply too? :-)

[@TheBreamer999]

I have two of these. One works with one charge controller but not the other. I swapped each one and they both work with the one charge controller. I also swapped cables, same issue. I also have a direct connect cable to my laptop and it works with the 2nd controller and the 1st contoller. So I'm at a loss as to why it doesnt work with my 2nd controller. Same model number controller as well

[@John-gm8ty]

I had really hoped this has standard wifi access :/ while still useful, it's going to me limited to wifi range and no ability to connect to a router. bummer.

[@stevetobias4890]

I would look into the EPEVER eLog01. It connects to the controller then let's you connect a PC via USB cable and at the same time connect a MT50 (or Bluetooth module / WiFi module). You can also use USB extension cables if your PC isn't close by. An added benefit is it's ability to store about 3 months of data ready to download to your PC or laptop.

[@G3DOG]

surely you can change some settings in the WiFi ebox, ie direct from a web browser...there is a factory default button after all.

[@ChrisDIYerOklahoma]

Got it to work (WIFI version). However, prob should have went with the Bluetooth version and not dabble with WIFI settings and all that connecting/disconnecting nonsense. Thanks tho...this video did get me up and running at least on my spare tablet.

[@AdamWelchUK]

It’s a bit of a funny setup the ebox. It’s designed for the android app really, but then that’s got the issue that you loose internet when using this. I think you’re right and the Bluetooth option is best for most people. Cheers Chris.

[@montaguemonro565]

They have a bluetooth one out now, would like to see a vid. :)

[@blaketech512]

It’s the same except you select BLE Instead of WIFI in the app

[@blaketech512]

It still doesn’t log every individual day to look at that’s my only gripe with the app and it doesn’t auto refresh if they had a improved version or dongle I would buy in a instant

[@shedlab6921]

Could you connect it to a laptop wirelessly? If you can then try typing in the default IP address for it and it may come up with a UI. Also, where did you get your charge controller from?

[@johndonhowe5050]

i'm thoroughly enjoying your videos- they're very entertaining, as well as informative. You showed that you can change parameters using the Android app. Does this mean that you could use this, rather than the RS485/USB cable and PC program you used in an earlier video to customize your controller completely? Other than the cable setup being cheaper, does it have any advantages over the wireless, in terms of your system configuration? Keep up the good work.

[@AdamWelchUK]

+John Donhowe Thanks for the kind comments John. I enjoy making videos. If you've seen my second video on this adapter it can be used as a straight replacement for the cable. Both can be used with the PC software to completely configure the charge controller.

[@miguelhurtado3873]

Thankyou Adam. I have it installed wifi on pc thanks to you and mr Brown. But I wander if I can have it on my android tablet as well so I don't need to turn on the pc sometimes?

[@MrRichhole]

Hi Adam, really useful video that helped me successfully connect my charge controller to my Android phone via wifi. But how do you do it via BT? It does not show up on the phone's BT menu. Thanks

[@stevetobias4890]

You need the Bluetooth module, there is one for Bluetooth and one for WiFi, not one for both.

[@TyBower]

Any comments on whether the WIFI or the BLE version of this link module is preferred?

[@hansworldtravels4253]

Has anyone any luck (in the last 5 years) using the ebox-wifi-01 to connect/read non EPEver charge controllers? I have it powered up and linked to App on iOS, but "Operation Failed" pops up on every action. My charge controller at least in theory has all the data (Solar, Batteries, Load - volts and amps) broadcast through the jack as they were going to produce a remote LED monitor, but never did. Maybe better luck via the Station program?

[@AdamWelchUK]

I think the issue could be any number of problems. Firstly, out of the box the ebox WiFi is set as a router rather than a device, so you have to connect to its wireless network. Secondly it uses a silly fixed IP address. Third it’s using specific wires in the connector for power and comms. If you’re using the epever app then it’s trying to communicate over the modbus protocol to a specific device ID and it’s asking for statistics in specific register (or memory locations) which of cause may be totally different for another brand. It isn’t to say your setup won’t work, but it’s going to take a fair bit of tinkering, testing and possibly hardware and software changes to round off that square peg to fit in EPEvers round hole. I’d look to use a usb rs485 adapter on your pc to simplify the hardware and a modbus scanner to simplify the software. Then make a big pot of coffee and start probing addresses and seeing what comes back.

[@michaelb2388]

What's the point of viewing your solar or charger information on an app on your phone if the Bluetooth range is only 50m? You may as well just look at the device display. You'd probably need another device to view the app over any distance data or WiFi

[@vicentepena7998]

Hi, trying to setup a LS1024B controller with the ebox to user battery mode I get the answer "please input right value", youknow what can be the problem? Regards. EDITED. I've found the problem, so I will write it here in case other people have the same issue. In the battery advanced mode of the app,when I choose user mode, all values change the dot for coma. I've changed again the comas to dots and then send the info and everything works fine.

[@danys2427]

thanks a lot!

[@evascroll]

gretting!!! love your vid!! epever best option for me!! question??? have you ever try to use one ebox(bluetooth) on multiples mppt using a Switch box?? thanks!!

[@ThangDoCP]

Can you help me install the phone link with ebox-ble-01?

[@ChileExpatFamily]

Will this work with MPP inverters and Midnite? Thanks in advance. Jim in Chile

[@AdamWelchUK]

I’m afraid not. It only works with EPEver charge controllers.

[@HelmutHassfurther]

Why is it called to serial converter; Is there only one RJ45 connector?

[@steiningehansen270]

Great video. Do you know why the daily, monthly and yearly energy consumed is showing 0?

[@stevemcgowan3017]

hi adam .great reviews by way.ive just bought epever 10a tracerfor my campwrvan.just have 100watt panel on roof so only need 10amp.that wifi box 1 what is cable for it.

[@vgamesx1]

Ohhh Neat, I'm thinking it might be a nice project to get an rs485 to serial converter then you use an ESP8266 to perform all those same functions for less than $10

[@AdamWelchUK]

+vgamesx1 Let me introduce you to Colin Hickey - kzbin.info/www/bejne/qHbHn2utabyXjqM

[@vgamesx1]

***** Yeah, I probably should've searched after the idea came to me...

[@ytu52973]

I did something similar with a HooToo Nano. I then switched to using a Pi Zero. Anyone near a microcenter in the US the Pi Zero can be had for $0.99.

[@vgamesx1]

Y Gator The Pi Zero is fantastic, though it needs way too many accessories IMO to get going with them, so I personally prefer the Orange Pi lite. I didn't however know you could get em for $1 nice, but I don't have a microcenter anywhere near me which is unfortunate. :(

[@nomadrvmontreal2733]

can you have more than one application running simultaneously (like on 2 different Android phone / tablet)

[@PaulPaid]

I see no reason why not.

[@grizzbeeuno2242]

I have a new wifi box that will does not show a station mode ? They must have changed the firmware ?

[@andrewgervais3039]

Yea. Adam talks about this in a later video. Apparently if you try to hack it to go into station mode it will brick the device. :(

[@martdaymo]

would you be able to do a review on one of their inverters?

[@AdamWelchUK]

I did look at the EPEver/EPSolar inverters on their website but there doesn't seem to be many about for sale. I tend to keep all my stuff DC. I have very little use for AC in the shed. Perhaps one day. Thanks for the question.

[@roxis69]

Congratulations on the excellent work. Is it possible to change the parameters of the epever tracer 3210AN mppt via wifi via the blue box? Thanks

[@David-kd7vl]

Quick question is there any way to extend the WiFi signal of this device I have this in my garden shed which is 60 feet away from my house. And ideas ?.

[@Yahgiggle]

i got the Bluetooth one because of your problem with wifi disconnecting re connecting just to use it oO paid about 35 us dollars for it on ebay

[@350Ginge]

I have a bluetooth one but cannot get it to pair either through the app or using a pin code any one know the pincode?

[@5j5estes]

Try standard 0000, 1234, default standards on tomers

[@thelwq]

You can use an old wifi AP to convert this messy type of wifi ti standard ethernet... It is not too difficult...

[@AdamWelchUK]

I've done an update video where I found you can put it into station mode and connect it to your normal wifi network - however I'm hearing reports that the latest software is now not allowing that hack. I've ordered another to confirm but your idea is making me think... cheers

[@thelwq]

Adam Welch : ur welcome... I have already done that many times, last time when i need connect LTE wifi hotspot to raspberry 4K webcam module capable of the ethernet only...

[@MyIronman8]

Question does that add the box to your network. Cuz if you drive if that a direct link to that box if it's Wi-Fi you directly connected that sucks . That means you have to disconnect it just reconnected to your internet . The Bluetooth would be a lot better . You can have the Bluetooth of your phone sync to it and you can have the Wi-Fi to your house Wi-Fi

[@GadgetAddict]

Pretty nifty, but like others have said, it seems a bit tedious that it can only work as an access point rather than joining an existing network. I'm guessing there's a way to tweak that behind the scenes. It reminds me of the apps for the generic RGB 'wifi' bulbs. Have you tried connecting to the box and then port sniffing it?

[@AdamWelchUK]

+Gadget Addict Happen to be doing that right now... I'll update when I can. Thanks for the comments.

[@stevetobias4890]

I would look into the EPEVER eLog01. It connects to the controller then let's you connect a PC via USB cable and at the same time connect a MT50 (or Bluetooth module / WiFi module). You can also use USB extension cables if your PC isn't close by. An added benefit is it's ability to store about 3 months of data ready to download to your PC or laptop.

[@ngocehgayabebas2118]

Great

[@mikeyasay6853]

hi adam, have you tried monitoring two eBOX-wifi (charge controller/inverters) using the android app?

[@AdamWelchUK]

I don't think that will be possible. I found that the eBox Wifi had a fixed IP address as standard, and the app specifically looked for that IP address. When I changed the eBox IP address the app couldn't find it any longer to pull information from. I have now attached the eBox to my wifi network at home as a client device so I can use it to monitor my tracer from my PC. I don't use the android app anymore - so unless this has been updated I think the answer is no.

[@SailingCorina]

I have two of them working and it allows you to switch back and forth between them to read my two controllers.

[@matthiase.6353]

Thank's for the Video.... An extrrnal WiFi Antenna would be nice.... ....would be an interresting modification.

[@MrAndreluizlima]

how to use Ebox Wifi With MTS-50 Together?

[@AdamWelchUK]

+Andre Lima No - not at the same time sorry.

[@timothy790110]

If you got the BT version, you wouldn't have any trouble with the wifi not connecting to the home wifi, correct?

[@mikeomax8101]

Thanks for useful videos, will this also work with Tracer AN series?

[@AdamWelchUK]

Yes it does, but only in the official way by connecting your pc or android phone to the ebox- WiFi ssid.

[@garyindiana8037]

I have this but I cannot get it to connect to Wi-Fi no more... It will not read

[@robertosalas3735]

muy bien gracias.

[@SeDivertindoComDuda]

BOM DIA. ATRAVÉS DESTE MODULO CONSIGO TER UM CONTROLE/HSTÓRICO DA PRODUÇÃO DAS PLACAS, SE NÃO TIVER COMO VC SABERIA ME INFORMAR QUAL TEM ESSA FUNÇÃO?

[@razorsharpbt124]

I can connect to the eBox-WIFI-01 with my android phone but it will not read anything on the app. It just says "loading" and I never get any parameters. Any ideas anyone?

[@adekunleadeseun8146]

Hi, can this device work with any charge controller

[@MdlaBaria]

I'm pretty sure NO.

[@johnerikmagnussen5758]

I like this 2 video 👍👍

[@jack-theoptimisticbaromete4278]

Do you have to have an internet signal for this to work?

[@davidjolly6673]

My phone connects to the unit (both lights are green) however I cannot get to the screen on the app where you can choose Bluetooth or wifi. Consequently I get the message “Device disconnected”. Getting frustrated.

[@patrickdufour5025]

had the same problem,then accidently swiped left through a few screens then it works.

[@thomashardin911]

They have an app for the android, but do they have an app for the iPhone?

[@AdamWelchUK]

+thomas hardin Nope android only last time I checked.

[@billduck1000]

I got one. But I am confused by the load settings. I think I've got real time control working. I set an on/off time with timer 1 and another with timer 2. But the light ON/OFF button works on PV voltage. Does this not conflict with the Time ON/ Time /OFF settings. Can you do one or the other?

[@RogerioMeire]

da para controlar a voltagem de saida?

[@emmanueltavora8642]

Hi friend! Can I use this with minghe charge controller? Thank you!

[@AdamWelchUK]

+Emmanuel Tavora No, it's for epsolar products only.

[@m0gga]

Hi Adam, I realise that this video is several years old now but when I first saw your channel I was inspired to set up a couple of 100 watt solar panels on top of my shed and I also purchased on Epever Tracer MPPT controller based on your reviews of it, I later purchased the E-box WiFi module. Unfortunately I have never to date been able to connect to the E-box from within my house. The shed is only 10 or so metres away, I can get a weak signal if I position my tablet on the window sill, but insufficient strength to connect to it and view the settings and parameters. It is supposed to have a 50 meter range but I suspect that this is just the usual Chinese hype, after all I cant see the point of having it if you have to be in the shed within a few meters of the controller. What has been your experience with the E-box WiFi module? Also if you don't mind, could you recommend a good pure sine wave inverter for my setup. Thank you for taking the time to share your experience with the community.

[@user-nd4oq4fx9v]

I just bought one wifi box for my inverter/mppt hybrid (upower-3000 series by epever) and got upto a point of connecting my phone to its wifi (it emits a local signal) but cant get the ep 01 app to connect to it. Am on ios15, not sure if thats an issue. I do get a signal in the house from its location in the shed but just cant get the app to connect!

[@daveslife9486]

Very informative many thanks 👍

[@rosstga]

Hi Adam I found this video of yours and i'm in the market for a Epever controller and the ebox wifi will be extremely handy in conjunction. Pleased you use this products. I going to convert my solar system from a hybrid controller and put up a rectifier seems the better solution do to have any comments changing to this way and add a manual brake. I refer to Missouri wind & Solar Jeff explains all his products so well . Regards Ross Tga NZ

[@maninavan.2043]

Hello, have just got this from Amazon and have now with a lot of "stop" - "starting" your video - i managed to get it installed and set up - Just a question, i have 4 batteries connected in series, so it will show 12v - but have 280ah - would this confuse the system? or just read it as one mass of batteries. Also the settings you have are they a set to your solar panel set up as i am just running a 50w Solar panel on the roof of my converted camper-van. Thanks for the video -

[@armandoscolaro2788]

Great review. Can you password protect it?

[@dmitryradchenko7458]

Можно ли этот адаптер перепрошить и сделать универсальным?

[@rashidmenarhayden1763]

Is this compatible with EPEVER TRACER AN??

[@stevemcgowan3017]

i thought would just use wifi box1 with an app an not bother with mt50.steve

[@kampfstern7119]

perfect tnx

[@cricketol]

Have you tried to use the rs485 to Wi-Fi with any other devices that can use the rs485 connector

[@AdamWelchUK]

Rs485 is an open standard, so this this should work with any rs485 device and the right bit of software to interpret the returned registers - BUT - I haven’t tried it.

[@pulesjet]

Thinking the Bluetooth would be more usable from a Laptop. Anyone know ?

[@stevetobias4890]

I would look into the EPEVER eLog01. It connects to the controller then let's you connect a PC via USB cable and at the same time connect a MT50 (or Bluetooth module / WiFi module). You can also use USB extension cables if your PC isn't close by. An added benefit is it's ability to store about 3 months of data ready to download to your PC or laptop.

[@davidh3764]

Hi, do you know if the Bluetooth module can be used by a pc to connect? Or is it just for mobile device?

[@stevetobias4890]

I would look into the EPEVER eLog01. It connects to the controller then let's you connect a PC via USB cable and at the same time connect a MT50 (or Bluetooth module / WiFi module). You can also use USB extension cables if your PC isn't close by. An added benefit is it's ability to store about 3 months of data ready to download to your PC or laptop.

[@timothy790110]

i got the bluetooth version, it asks me for a code that is not provided with the unit, f&&ing infuriating. 0000 and 1234 dont work either. it wont show up in the app either.

[@peterokeleke307]

Experiencing the same challenge right now, I don't know what code to use.

[@ooaqici82qb4ip]

Good video as always I bought the EPEver eBox-ble 01 and i can't get it to connect. i tried connecting directly through bluetooth and entering the 4 digit pin 1234 or 0000' while doing this both green lights were on but it keeps saying "wrong pin" (these are the manufacturers designated pin codes). I then tried connecting directly through the app. I got bluetooth to see the device and went into the app and it couldn't see the unit ie 1 green light and nothing popped up on the app screen. Is this unit defective or am i doing something wrong,. i've tried everything the sellers tech suggested and nothing works and now the seller's saying it's my fault. Any ideas/suggestions to try before returning it as they aren't accepting responsibility and insist it's me and don't want to refund or replace the unit with a wifi version

[@AdamWelchUK]

I haven’t used the Bluetooth version so I can’t really comment. Sorry to hear you’re having trouble with support. Hopefully someone else might read your comment and have some useful advice.

[@bojan27051981]

I bought this wi fi device but I have problem I can not instal app on my mobile phone, app on Epever site is update in 2017

[@theradicalreformer2894]

Same here.

[@roxis69]

Good Morning Congratulations for your work What is the best solution to monitor a solar system with battery through the internet with a connection (WIFI or RJ45)? In other words, how can I check the status of the battery and solar production without having to go to the installation site? I want to be able to check the status of the solar system over the internet from anywhere, how can I do it? Thanks

[@AdamWelchUK]

Thank you. The way I do it is to log the solar stats to an mqtt server - then I can query this to display the data in various places. I use my own node red dashboard to connect to a rs485 to wireless adapter which then logs to mqtt. Alternatively I recommend Colin Hickeys rs485 to WiFi solution. I monitor my stats in Grafana but use home assistant to notify me if things aren’t as they should be. EPEver do not make a solution designed to be viewed on the public internet - I guess there is too much liability if it were insecure.

[@jasonsparks840]

@@AdamWelchUK could it be plugged into a router? I have solar powered light and surveillance towers that have wifi on board. Could i monitor remotely using this set up?

[@rayhsetwo8594]

@@jasonsparks840 Did you manage to get it working over the internet? I have same requirements, I want to use a 4g router and query the controller via that to monitor batteries?

[@uskazcity]

I have both the tracer and ebox connected but the mobile app cannot read the values on controller. Is there any setting on the controller that prevents the connection?

[@AdamWelchUK]

+Usman Kazaure Abdullahi No, the comms can’t be turned off. How are you connecting to the ebox, pc or Android? If it’s the pc, then the issue is probably with your virtual comm port software or the configuration of the connection in the solar station monitor software.

[@uskazcity]

Adam Welch it’s now connecting very well with my PC the other challenge is connecting to ebox wirelessly using the PC. I noticed that the software has only AP mode there’s no option to change. Thanks

[@stevemcgowan3017]

IS CABLE THE STANDARD ETHERNET CABLE THAT ROUTERS USE

[@stevetobias4890]

Yes but do not connect to ethernet, it is RS 485 using an ethernet cable 8 cables use 4 twisted pairs, outers are VCC & GND inners are TX & RX

[@stevemcgowan3017]

@@stevetobias4890 never got to work I use Renogy Bluetooth mppt now

[@impalagfunk]

Hi, Adam. I guess that it doesn't work with the Tracer AN series, right?

[@AdamWelchUK]

It does work with the AN actually.

[@impalagfunk]

@@AdamWelchUK Thanks for your answer! I read it wrong and I understood that it "doesn't" work with AN. I'll get it ;)

[@michaelb2388]

It doesn't really look like it gives you much more information than a MT-50 display

[@MagsterMagic]

what mean these turn on and off loads at 5v or 6v and delay??

[@andrewgervais3039]

I think it means when the PV input reads 5v (which means its dark outside i.e. nighttime) the load will automatically come on. When the PV input rises to 6v which would mean it getting light out or day time, the load shuts off.

[@MyIronman8]

Ok you Sayed it at the end

[@Klaas_H]

Hi Adam After watching your EPEVER WiFi video I purchased one myself for my Tracer 3210A controller. My phone connects to the unit (both lights are green) however I cannot get to the screen on the app where you can choose Bluetooth or wifi. Consequently I get the message “Device disconnected”. The cable is connected OK and it works fine with the MT50 when I plug this in. Any ideas? Thanks Klaas

[@davidjolly6673]

Hi Klaas, did you find out what the problem was as I have the same issue. Dave

[@Klaas_H]

Hi Dave Yes, I resolved it. The software on the Tracer website had some hiccups. I uninstalled it and then downloaded the android app from my supplier. www.aasolar.co.nz Go to the download sections and look at software. Let me know if that solved your problem. Klaas

[@davidjolly6673]

Thank you Klaas, fixed the problem, the software on the ePever site has been changed and does not work with the units in Australia either.

[@SOLARSHED13]

Hi adam, does this work with the tracer AN series?

[@stevetobias4890]

Yes, AN & BN series controllers

[@wisalahmad1867]

Hello I need help

[@Chickey]

Can i be smug and say i think i prefer my version :-)

[@AdamWelchUK]

+Colin Hickey (Lets make stuff!) You should be smug. I am interested to see if I can get my laptop talking to this via the software serial software you suggest. Yours has a big advantage - acting as a device rather than an access point.

[@Chickey]

Joking aside it looks like a good product but as you mention shame it has to be an access point rather than just on your normal network. They should be able to modify that via software though so maybe they'll enable it down the line. i wonder if the app is hardcoded for the IP assigned to the device for now. I'd be interested in doing it the other way around. I can change the ESP8266 in mysetup to be an AP and give out IP's on that range so mimic the device as it where, just need to figure out the IP of the device. Oh and just as an update the adaptor i made has been working great and i've installed the software on all the pc's i use so can fire it up when i need to check something from any machine.

[@giuseppelemma8211]

Qualcuno saprebbe aiutarmi?? Il mio ebox si collega solo in Wi-Fi e non in 4g con il CELL e se è collegato con la rete l'ebox non navigo più con il CELL. Potreste aiutarmi??? Grazie

[@taesan007]

How much does it cost?

[@AdamWelchUK]

+Denis Lenskiy I mentioned at the end that they are £20 which is about 26USD but the ones I found on eBay were much more. Another viewer found a couple of other auctions which were cheaper though.

[@jezhayes]

Is there no security on it? I'd dread your neighbour kids finding it and upping your float voltage to 999999v

[@AdamWelchUK]

+Jeremy Hayes I'm looking into this. I'll get back to you soon. They're good kids though :-)

[@mimic58]

It doesnt let you change anything with regard to the USER profile remotely , You could however set manual battery voltage selection

[@stevenl4422]

i think you can also just disconnect the eBox-Wifi-01 from your charge controller after you change your settings though , so you really shouldent have to leave it plugged in if that bothers you too much i think ?

[@stevetobias4890]

I would look into the EPEVER eLog01. It connects to the controller then let's you connect a PC via USB cable and at the same time connect a MT50 (or Bluetooth module / WiFi module). You can also use USB extension cables if your PC isn't close by. An added benefit is it's ability to store about 3 months of data ready to download to your PC or laptop. This way you can disconnect either or both knowing that the data is still being stored via hardwire.

[@alzeNL]

any app for iOS ?

[@emmanueltavora8642]

Is there one to use with Minghe?

[@AdamWelchUK]

+Emmanuel Tavora I don't believe it has any external monitoring facilities on the Ming-he

[@emmanueltavora8642]

Thank you!

[@tigrafrog]

Why the hell this "app" not listed in google store? Why it required full access to almost everything? sd card? really? I guess you can kiss your data/privacy on that tablet goodby. I strongly recommend to disable "regular" wifi on that tablet and use it only for this eBox.

[@stevenbonnington9027]

Does this work with iOS ? Or the Bluetooth one ?

[@AdamWelchUK]

Nope. There’s not an iOS EPEver app I’m aware of.

[@alzeNL]

lol@IP whois 11.11.11.100 :) Organization: DoD Network Information Center (DNIC)

[@martinericsson3601]

Is it possible to have the MT50 Display Unit and WiFi box connecterd simultaniusly, With an hub or something like that.

[@stevetobias4890]

Yes but it has to be a RS485 hub, the data may be a little slower but it's possible. Just remember to plug the controller into the master port.

[@yancymu9112]

Adam, I have accomplished this using a usb Server utility called virtualHere running on a raspberry pi, and the client unending on the PC. It works great. Please see my video.

[@Vamire6666]

hello dude. Can you set a password on this on or not? this is very important

[@Vamire6666]

ok i bought this on and does it support security settings wpa etc. a great product

[@AdamWelchUK]

+Vamire Yeah - have you seen my update video?

[@Vamire6666]

Adam Welch not yet my friend is something important? cuz im on mobile data right now. peace

[@AdamWelchUK]

+Vamire Not to worry. In that video I show how it can be configured to connect to your home wifi and password protect it. As long as you've found all that, there's no need to watch it.

[@Vamire6666]

Adam Welch oh ok. I will watch it later as I'm sure I miss a lot of staff. I want to connect it to my pc and adjust some battery options.. I can't change them through the android app. Any advice?