Thinking about building in Florida, appreciated all the videos and detailed explanations that you have done, would defiantly help me in the future
@jimmierodgers2397Ай бұрын
I love this house. I live a few blocks from it. I have to admit I would ride my bike by it during the construction and watch the progress. Now I am planing my own FL build and plan to use yours as inspiration. Nice job brother.
@BuiltByMikeАй бұрын
Thanks. Finishing my dad's now down the street
@gonelive11 ай бұрын
You should have gone with pre-engineer metal framing and left room on your slab for concrete block exterior. It's cheaper, stronger, and less problems.
@BuiltByMike10 ай бұрын
It wasn't cheaper at the time. I wanted to do metal trusses and they were about 50k
@gonelive10 ай бұрын
@@BuiltByMike The entire building installed with siding and roof should have been around 50K for pre-engineered metal. that's not including insulation or exterior windows or doors or interior finishings. I assume it's under 4000 Square feet. Pre-engineered metal is by far the better choice. It eliminates all of the engineering hassles and helps keep you on budget. Not to mention it's a better structure.
@tylermccall2484 Жыл бұрын
You could clad that beam with zipboard to protect from elements. Overhang is still a good idea though. House looks great!
@BuiltByMike Жыл бұрын
Thanks
@danddwelding5148 Жыл бұрын
I love your design. Wish I could build one like that here in Texas
@BuiltByMike Жыл бұрын
Don't see why not.
@joshuamarks617511 ай бұрын
Build it!
@LogansRun31411 ай бұрын
Hey man, thanks for making these vids! Do you remember the vertical spacing(rebar) for the exterior walls?
@BuiltByMike11 ай бұрын
I believe it was every 4 feet. I think that's engineered depending on the house. This house had alot more rebar then most I've seen.
@micmike5 ай бұрын
Keeping a record in the engineers stupidity can be addressed through the courts later.
@BuiltByMike5 ай бұрын
Probably not worth the effort
@anonymousbyproxy82508 ай бұрын
If u know, how the furring strips were attached to the block wall ? Shot in ? Hammered by hand ! Drilled holes then hammered in !
@BuiltByMike8 ай бұрын
With an airgun. Not sure if they are special nails or what but I was surprised.
@dawnpugsley1877 ай бұрын
Can you please post your inspections in 1st to last?
@BuiltByMike7 ай бұрын
I have no idea. Every county probably has different ones anyways
@anonymousbyproxy82508 ай бұрын
9:37. I would still have it polished. Who would look down on your floor and who would care ?!?
@jacksonmartinez8673 Жыл бұрын
Hello Mike. I would like to build my own home. Where do I start ?
@BuiltByMike Жыл бұрын
Start drawing what you want. Tape them to a wall you pass by everyday
@anonymousbyproxy82508 ай бұрын
Did u start yet ?
@majid_us7 ай бұрын
Hello, What is the roof pitch over the garage and the left side? Thanks
@BuiltByMike7 ай бұрын
3 12 both sides
@polopolomay1 Жыл бұрын
Good day... Did this double shed roof design require interior load bearing walls OR were only the perimeter walls load bearing?
@BuiltByMike Жыл бұрын
The center wall is load bearing and is poured solid.
@BuiltByMike Жыл бұрын
And the back wall of the garage.
@polopolomay110 ай бұрын
Good day, Mike... I'm undertaking a similar owner builder project (cmu, skillion roof) would you be willing to share your structural details pages from your project?
@BuiltByMike10 ай бұрын
That's all going to be home specific
@anonymousbyproxy82508 ай бұрын
6:04. Nothing wrong with having an overhang.
@dieselrugg Жыл бұрын
curious what your cost per sq/ft is on this build...??
@BuiltByMike Жыл бұрын
About 160. But my garage is almost 1000 sqft
@robertwhite90197 ай бұрын
Hi Mike, I'm Robert White, and I'm building homes in North Port. How can I get a consultation with you?
@BuiltByMike7 ай бұрын
I'm not a builder
@Star-bd8zm Жыл бұрын
Who did the bumpy cement floor so i dont hire them? U have to supervise while they build.
@BuiltByMike Жыл бұрын
No idea one of the builders subs. I tried to be here the most I can but it's not easy.
@shirttechs424410 ай бұрын
Hi Sir Are you near North Port FL?
@BuiltByMike10 ай бұрын
Yes
@os8055 Жыл бұрын
How did you do the slant with the blocks
@BuiltByMike Жыл бұрын
That part is framed and poured
@GarFlooring Жыл бұрын
Mike Approx. How much brick/block was used in the home building