The ULTIMATE YouTube & Streaming Mixer - Behringer Xenyx x1832USB Review

[@EposVox]

FIRST 🎤🎤 Check out our sponsor - AntLion ModMic: antlionaudio.com/collections/modmic-for-gaming?Eposvox&KZbin&XLR PRODUCT LINKS (Amazon Affiliate): Behringer x1832USB: geni.us/4o7TxOK Behringer x2222USB (better value at $250): geni.us/9PubB MUSIC USED :: Spectrum by Mono Memory monomemory.bandcamp.com/

[@InconsistentManner]

Have you considered turning the presonus and trying mackies line of USB mixers?

[@EposVox]

I mention the PreSonus I had tried switching to in this video :P I couldn't really find any 2-bus mixers that had the amount of inputs I need for a competitive price to the x1832 and x2222 so there was no reason for me to switch.

[@RobertShaverOfAustin]

Look how long you've had that Behringer POS. I used to be like that. Now I try to buy quality equipment and tools. Just a thought.

[@EposVox]

Uhuh. Find me a "quality" 2-bus mixer (sub-mix) with 4+ stereo inputs and 4+ XLR/TRS inputs and physical on-board controls for routing for around $300 and I'd happily return my x2222 order and buy it. There really isn't anything, and nothing more "quality" would benefit me - actual audio quality won't change, and at best I might not need my hum destroyers anymore, which I've already paid for :P I, too, "try to buy quality equipment and tools" and this one has been a work horse and has done the job better than anything else I've tried. Any potential "quality" upgrade means way more cost or sacrifice in terms of workflow, which just doesn't make sense to do.

[@regmason2329]

I have owned my 1832 since July 2017. I use it for practice and live performances, I am a single keyboardist/vocalist. I turn it off/on 10-15 times a day- EVERY DAY and run it 3-4 hours per day + live gigs. It has caused me NO problems what so ever. And it is totally quiet with tons of headroom. The effects are extremely useful once you find what suits your style and needs. The 9 band EQ AND feedback finder are extremely useful as is the compressor. I run my Casio PX-560 thru a Radial ProD2, using XLR's to the mixer. I use a Shure PSM 300 wireless in-ear monitors run thru a Radial Stage Bug 6, and Shure GLX D 24 wireless mic system, using an XLR to the mixer. I run two QSC 8.2's (XLR's) thru a Radial Twin Iso for my sound. My sound is crystal clear, and I receive compliments re my sound wherever I play! From my experience this is one fantastic mixer- and it cost me $249.00! My one complaint- the 48 volt phantom power switch is right next to the power switch- but I taped it off. I was aware of the many negative comments re Behringer before I purchased. But I also saw many positive comments. Since many "other" factors can contribute to a products performance I took this into consideration, I'm glad I did. Nothing in this price range has the features or performance of this mixer from my experience.

[@oysteinsoreide4323]

Can the noise issue be because you use much single ended signals instead of balanced audio transfering.

[@StephanWithPH]

Omg, you're an absolute legend! I was looking for the solution with the different sound outputs and this with the screen output will help me so well!

[@AironExTv]

Thank you for this thorough look at this mixer. Getting a good digital and yet hands-on solution going is either expensive or a lot of setup work. The two Tip Of The Hats streams I mixed were done on a Mackie 1608 DL(iPad mixer), an RME Fireface UC(USB interface) and a Focusrite 2/2 USB interface(streaming machine input) for the first event. The second swapped out the Mackie for the X32 Behringer, which improved hands-on control a great deal. Extra iPads helped as remotes as well. That’s the expensive option. The cheaper option is to have a professional audio interface like the RME, and use Reaper because it’s so flexible to use with any control sources, be they the computer keyboard, midi devices or controllers. Now I’d be testing the smaller ipad mixers, depending on the show size. The X32 was running multiple sub mixes from up to 10 mics and lots of stereo line sources. Submixes for commentators, players, production crew, stream and even live stage. Great preamps too, though the Midas version may be better if you have a wider range of signal sources. If it’s financially viable, I’d go with a medium digital mixer and a pro audio interface.

[@EposVox]

Lol $250 mixer versus $1200 mixer - not even remotely the kind of thing I'm going for. I literally just need to hear all my sources, record my mic, and output RCA to my tape deck while that's an option - there is quite literally no reason to jump to such expensive nonsense for that, and I'm not sure why people keep pushing that. Not to mention far out of my budget.

[@AGTech]

I also use a Behringer mixer, a qx1622 to be exact, and am pretty happy with it in my dual pc stream setup (Mainly because it's the only one with all these features in this form factor. If I had more space on my desk, I would probably choose the Yamaha MGP12X).

[@bubdrum]

Hi EpoxVox, I have this mixer along with a Rode Procaster mic. Connected via usb to my Laptop. And like you mentioned in the video I'm getting very low volume when recording in this method. What route would you suggest I go. A. Get a separate preamp device to plug mic into then into mixer (and which product do you suggest) or B. Try to use line level output ? Love the content and the vids. Thanks in advance.

[@TheFartsandCrapsShow]

I personally use a Xenyx 802 USB, and I've really been liking it so far. When it comes time for a new mixer, I'll probably get another Behringer. Thanks for the vid!

[@EposVox]

Thanks for watching!

[@josephyoung8857]

I was thinking of purchasing this product to replace our old mixer at the church. If this isn't the best solution, do you know what is? I am running keyboard, drums, organ, guitars, computer for streaming..... THANKS.

[@TrippM100]

I am looking at moving to Yamaha MG10 or Mackie ProFXv2 mixer. Which would you recommend? Have seen both recommended for their good pre-amps. Currently have the Behringer 802 USB and it was okay to start, but I'm looking for better quality audio and more inputs now. Looked at interfaces but just not enough control for Live stuff. Would love to have the Zoom L-12, but it's a little out of my budget. Thoughts on either of the two listed above?

[@TrippM100]

Damn. Both are two of the top rated. Was leaning towards the Mackie because of the faders and recommendations. But the last thing I want is a noisy pre-amp. I'm also back to leaning towards Zoom L-12. If I got that I should pretty much be done having to upgrade for several years unless something big happened. Haha Thanks for sharing your experience!

[@madrx2]

I just purchased one new today

[@alexander_mejia]

If you don't need the physical Controls on the device you are plugging things in and out of, I've used the Beheringer X air 12 for all of my streams and it has been AMAZING. It's got all the effects the really expensive X32 mixer has, all in a small headless box you can stash away behind your computer so You don't have to have the mess of wires from multiple sources. You can create up to 6 buses, route them all around internally, do compression, EQ, hard limiting and even have up to 4 effect tracks you can send. It's really the professional mixer and you should take a look. The only downside is that it doesn't come with hardware controls. I found being able to mix it on my PC and tablets to actually be a better solution since it cleared up desk space. If you need more inputs, or need USB out on it there's an XR 18 model. Oh and the pres on it are not noisy. Worth it for that alone.

[@EposVox]

I was looking at that, but seemed to not do what I need for the $When routing on the PC, can you combine inputs? I.e. the one I was looking at was just a bunch of mono inputs, so I'd need to pair some up for stereo. and can you route them to separate Windows-detected devices, or is it just a big multi-channel ASIO device? That doesn't work for most of my uses, sadly.

[@alexander_mejia]

The software lets you combine 2 inputs next to each other as stereo, so you can fade one track or set compression settings and it will affect both. The XR18 acts as an 18 In/Out USB audio interface. You can assign weather the analog inputs on the board are used, or if input from your PC is used to mix. There is a driver on their web page. I'm not sure if it shows up as 18 seperate WME sound cards or if it's just an ASIO device you can control for windows. On the XR18, there are 6 balanced XLR AUX outputs on it. You can route any number of tracks, pre/post fader,eq,and FX to any of the AUX outputs. We use to take side-chain ducked compressed audio and send it out into a box that would combine the audio with an HDMI signal to have a processed game recording go into a capture card, while we summed several microphones all with seperate Compression and EQ settings to another output for Skype Calls. You'll have to spend a few thousand dollars to get something more versatile and flexible than that mixer.

[@ClockworkD0rk]

You can combine any two inputs to stereo on any mixer. That's what the L/R faders are for.

[@EposVox]

Yeah, I looked into it, it's ASIO/18ch vs 2 ch only. Digital mixers are virtually useless for my workflow. Seem perfect if you're JUST recording audio, but recording audio on the fly in video capture apps that can't handle ASIO multichannel, not gunna work.

[@workethicrecords5901]

I use an x-air 12 also, and the noise floor on it is non-existent. I love it. Even if you don't land on this guy, a digital mixer will help with noise reduction so much in your setup. There are two auxilary outs, as well as a main stereo out you can use both for sub-mixes. (One stereo mix, one stereo submix or two mono sub mixes) There are also 4 internal busses that you can route anywhere. Honestley, you might want to pick one up, and the return it if you don't like it.

[@Starky3000]

Almost 5 years ago? It was delivered on April 30th 2013.....That's 5years 3months and a bit. Still a great review and loving the channel.

[@EposVox]

This was recorded in May and being off by 3 months hardly affects that statement :P no one needs that level of specificity and they can clearly read the email date

[@Starky3000]

EposVox sorry, i suffer from terrible OCD. Still enjoyed the video and amazing on how informative it is.

[@EposVox]

Thanks for watching!

[@Nur-hi4kn]

Is it decent for recording ? Or should il get a focusrite ?

[@johnmedeiros3445]

im currently using: 2019 astro mixamp pro going thru a ground loop noise isolater to my m-audio air 192/4 for mic + headphone(monitoring) and game/voice control while playing using mixamp. im using a korg kontrol2 and voicemeeter potato and my stream deck to monitor/control my streams. do you think investing in a studio mixer is a worth upgrade to using kontrol2+voicemeeter potato? EposVox you are the only person i consider an expert on streaming and audio solutions. You have a rock solid approach to laying out the info in a way a common guy like myself can absorb it and learn from it, thank you.

[@devian1907]

hi i was planing to stream on twitch, mostly playing games... i found this mixer at home, my parents said i can use it if i want, so my question is should i use this or should buy buy a mini compact one like Yamaha Mg06X ?

[@daethwing188]

EposVox, I'm rewatching now, but have you had audio skipping in discord using the second sound card?

[@EposVox]

Nope

[@farmer561ify]

Im looking into a Mixer for streaming and have been looking at MG10XU. Im using a dual PC setup and want Discord, Music and Game audio seperate. I was thinking that the MG10XU will work if I use the mono line for Discord. Later I have been looking into the MG12XU just to get that extra stereo output, but the extra $ (I know you can do more with the MG12XU). I also was looking into Behringer X1204USB or Mackie ProFX8v2. Now I can't pick. The Behringer is so much cheaper then the MG12XU, but many say that stay away from Behringer Xenyx mixers. I have been researching alot and can't decide. Im also looking into hooking a Shure SM7B or RE320. Any thoughts where to go with the setup I want?

[@DieTabbi]

I have the same setup in mind. I have one PC with 2 soundcards and the gaming with one. Someone suggested the "Allen & Heath ZED-10FX" because of better sound then the MG10XU? But more expensive. Which mixer did you buy? And why did you buy it? I would like to have 3 stereo line in, if possible?

[@R3DST1CK]

DieTabbi so the problem with with the Yamaha not sure about the Allen and heath is that it doesn’t have the option to listen to specific channels.

[@LadyGin2]

hey. I have that mixer.. need help connecting it please.. no sound is com I coming out.. all speakers work

[@MetalHeadHippie]

So what did you end up getting?

[@bluepianist2497]

Does it work for event concert live singing or dj???

[@capp00]

Yup, this is a tad outside my wheelhouse. But great video review as always.

[@EposVox]

Thanks for watching!

[@wyldbylli4047]

Maybe you guys can tell me if this will out put multi track into a daw? Don't like that it uses ASIO4all since that is what i was having issues with. Does anyone know if their audio interfaces use that driver also or do they have a dedicated driver or something different?

[@olii]

Hi there, I've got the X1204 mixer. I've setup all the inputs (from gaming and streaming to mixer) the streaming pc is only outputting to my right ear. The mic is having issues with volume and there this overall static noise that occurs no matter the inputs or ouputs - even on the USB output. I also got a 1/4 to 3.5 so I can set my discord output to my monitor and route that to the mixer as a separate mono track for VoIP but the quality is very bad. I tried on my phone too and the same issue occurs.

[@zinsy23]

I've always wondered how these work. I know the basics but cool to see how you use that stuff! Is that in your old apartment or is the background very similar?

[@EposVox]

Old apartment.

[@ramonmolina3314]

What external mic preamps do you use with your mixer?

[@quint2568]

Would it work for usb headphones?

[@chriswilson9388]

does the eq work if the audio is coming from the usb?

[@nocturnosrockradio3400]

X2222 is what we use and it rocks...

[@39zack]

I been thinking of a hardware mixer but could not find a way to output 5 different sources from one pc without mixing them together. If only the souround dound cards output could have been used as 3-4 stereo outputs. Or if the USB on a mixer had more than one channel

[@haloboy456]

Great education as always! For us Voicemeter users, would you be willing to do a follow up on a "so you're settling with Voicemeter" vid, and show how'd that integrate into say your Master OBS class [if it hasn't already yet I'm still working through it :-)], or perhaps if someone's using voicemeeter but also wants to add a mixer to the situation how and why they might want to use that in tandem with voicemeeter if thats even thing. P.S. Jailbroke PSP going strong!

[@jimshannononsounds]

I'm getting a lot of clipping as soon as I use any plugins even native ones from Cubase 6 etc/obs. My Focusrite 2i4 might be the issue, not sure.

[@dangelforever690]

At this point Im pretty much a voicemeter expert if you want some tips. I have a discord for it if you want to talk about how to use it or anything. discord.gg/RkJgWzx

[@dangelforever690]

If you use pretty much any usb audio interface, and voicemeter of course, you can avoid using any onboard audio of any kind, monior or motherboard, and avoid any audio interference from your electronic components. It seems odd that you are using any onboard audio at all since you are using that mixer. You will almost always get some bleed from using any quarter inch line inputs if they are audio outputs from either your monitor or motherboard audio. Using the asio input for your audio interface in voicemeter will allow you to route all audio outputs from your mixer to the inputs on your usb interface and avoid any high frequency bleed from your pc. Many many hours of using voicemeter and all its features.

[@EposVox]

I'm not touching virtual audio cable software with a 99fot pole

[@dangelforever690]

I only mentioned it because I have never been able to get crystal clear audio from most PC audio out sources. Every HDMI and motherboard audio source has always caused audio quality issues with any of the equipment I have ever used. If you have a very well made (shielded sound card) then you can pipe the audio for the final mix to obs with the line input from the main mix output from the mixer, but I haven't been able to find an affordable internal sound card that doesn't pick up interference from the motherboard and such. In lieu of that, I've been using voice meter as the default output for the PC sound (games, whatever.) and using the inputs on a USB audio interface to grab the audio from my mixer (mics, whatever else is connected ) and since I'm using the asio driver there is no latency at all, or any noise or hissing or anything. Oh, and if you have a mixer that has the ability to do multi track out over USB, they then to run about 500-800 bucks for decent ones, you can use Voicemeters asio input to send the audio to a separate channel input for each, and then output that to any input or anything in any application running on your computer. Short of having multiple audio out sources ( usb interfaces, to avoid any interference from the motherboard.) this is the easiest, headache free way of managing your audio for streaming and recording that I have been able to come up with.

[@EposVox]

Weird, I've never had issues w/ motherboard out. And USB audio gets bad when you're putting system under full load. Windows likes to kick out audio devices. Wound up having a bad time when I tried switching from this to USB interfaces for a while.

[@dangelforever690]

Yes i have noticed the under full load issue as well, I imagine that with a really high end motherboard that might not be as much of an issue. I have tried really hard to avoid as much in the way of software and stick with hardware as much as possible,

[@EposVox]

I've always used the highest end motherboards for my chipset, doesn't help. It's not a motherboard problem, it's a Windows problem.

[@knightshousegames]

Have you looked at the Yamaha mixers? My friend has one of the smaller ones that works really nicely.

[@ClockworkD0rk]

I really like the Soundcraft Signature 12 MTK (or 22 if you need more channels), I just picked one up a few weeks ago after a ton of research and it's been awesome.

[@carlmmii]

Can confirm, the signature 12 is a joy to use. Very similar functionality to the 1204+ on the behringer side, more aux lines, and a very clean mix. Also, no USB issues to note -- no problems at all with sending and receiving at proper volume. The one weird bit that I wish was better done is how only channel 1&2 have compression (and it's really just a limiter toggle), and only channel 5&6 have hi-Z toggles. Also, main out is XLR-only. Other than that, for the actual audio quality, it does a phenomenal job of keeping the signals clean from start to finish.

[@sebastiang914]

Clockwork D0rk Do you see all in/out channels windows or its possibile only in program as DAW?

[@ClockworkD0rk]

Every pair of channels shows up in windows (after you install the drivers) as a device since windows expects stereo devices. It also has excellent ASIO drivers if you want to use it with a DAW.

[@EposVox]

OH REALLY?! Literally every digital mixer/etc. people have recommended so far have been just one giant multichannel device/ASIO chain. I may look into this.

[@EposVox]

@Clockwork D0rk - I'm not finding much documentation on this. Is there any way you could do a super quick video (unlisted) showing me the devices showing up and etc.? I might order that mixer this week if so

[@1993danh]

is there a way to have a PlayStation 4 going into a mixer, to control volume and where the sound gets routed to like headphones and speakers ?

[@EposVox]

There are some HDMI splitters w/ 3.5mm output - or you just run the monitor headphone out to the mixer, which is what I do

[@1993danh]

thank you, I'll have a look into some. There wont be a way to do it through VoiceMeeter ?

[@EposVox]

o_O Voicemeter is for PC sources. You might be able to route your capture card that way if you're using one, but I have no idea. I don't use virtual cable apps

[@lpseem3770]

I stayed with Behringers as well. Thank You for a very informative review. I don't really care about features and eledtronics. Mixer should do one job very well.

[@Saphir__]

Anything that’s more affordable and less extravagant?

[@chillwill1083]

Nice setup. Very similar to what I have for my DJ streams. Got my DJ mixer into an Allen & Heath Zed 14 analog mixer, then that goes into my audio interface (Presonus Studio 192, kinda overkill) which I then ingest into OBS for streaming and Audacity for quick recording. I didn't try the Behringer mixer before going to the Zed 14 but I did try the comparable mackie one and yup I agree there's some crazy noise in the lower end mixers if you need to push it. If you can I'd highly check out one of the Zed mixers if you're still having issues or want to check something else out. Feel free to ask me any questions if ya need too :) Thanks for doing all these awesome streaming videos man.

[@RyanHannaMusic]

ive noticed output channels just suddenly quit on me, the mail left or right especially

[@perfectalpha]

Interesting you would stick with Behringer given the hum issues you were talking about. Right now, I am using a UR44 audio interface and I was thinking about switching back to a mixer. I could get something like the MG10XU from Yamaha but the FX Send is the only send you really have and like you mentioned, there are no submixes. I've also thought about the Mackie ProFX8v2 (and 12v2), but that again runs into the same issue. From my online research, the only mixer via USB that doesn't have this issue is the Allen & Heath mixers. Of course, I don't think they have the number of inputs I would need. Ideally, I would probably need the Yamaha MG12XU to do everything I would need via stream...but $$$$. I don't know if I would like to go that high. Truth is, I probably just need to sit down and learn how to use the UR44 in Cubase and I'll be good once I route things how I want. Nice video though! It is fun that it came out at the same time I was shopping for these items as well. Hope it all works out for you.

[@EposVox]

Sticking with it because I can't find another competitively priced 2-bus mixer w/ the number of inputs I need. USB isn't used and isn't a priority. And the hum issue is going to be present in most mixers since it comes from my input sources, not the mixer (for the mooooost part). The Hum destroyers clear it all up.

[@AnNguyen-td7zy]

How to setup FX, sir?

[@DVZNMedia]

I have the baby brother of this, great review fam

[@EposVox]

Thanks dude!

[@luccoetzee7328]

I had started doing my highschools sound mixing two years ago , in the begining I looked at it and thought what the living fuck do i need these things for,it didn't help that my mentor literally only tod me about gain and tha volume slider......but after two years of experience and various live shows mixing bands and events i am truly shocked it its simplicity to what i thought back then

[@downtherabbithole5206]

I gave up on mixers because every one I used had some noise to it so I just use a audio interface and the dbx 286x and I have not had any noise in the 2 years Ive used this set up.

[@jimshannononsounds]

That's interesting about the Focusrite audio interface. My 2i4 is barely a year old and using Voicemeter connected to obs, really makes my AT2035 quiet when using Cubase 6 etc. My gain on the 2i4 is up at ~ 2 o'clock as well. As a telephone market research interviewer, I use my voice daily in a professional capacity on a crapy headset. My voice comes across clear when I need to reach out into even in rural areas even over voip. I'm at a loss as to what's going on with Voicemeter/obs. I'm considering just using my Logitech C270 instead of the 2i4, sigh.

[@LapisLazuliLamb]

what else do u need to make music

[@YizzyBeBuzy-COPRODO]

Why did you choose this mixer instead of like a Yamaha or a Mackie mixer??? Because I hear you downing it and praising it at the same time???

[@jasonhowe1697]

i would avoid rca>3.5mm or 2.5 mm convertor cables because they will produce white noise and humm into your audio as you can go from grouded to ungrounded

[@EposVox]

As would I. Balanced TS/TRS cables only. I only use RCA for going from RCA on mixer to RCA on my tape deck.

[@jasonhowe1697]

i've been playing around with pc audio to hifi/av for close on 30 years.. there is only way to get clean audio is either by direct with rca sound card or spdif digital as connections can have differing grounding issues

[@EposVox]

Indeed, but SPDIF only audio is incredibly expensive and doesn't account for microphones or many of the extraneous inputs I use. When you're connecting multiple microphones with a chain of processing hardware on one of them, multiple computers and etc - there's going to be bleed and noise issues no matter what you do. Point to point the cables I use don't seem to cause any inherent noise themselves.

[@lucasriddervevo]

Try out a allen and heath mixer sometime, they are a bit pricy but are really reliable

[@MichaelVash7886]

At this point the two mixers are showing at basically the same price. I'll have to see if they differ overly much. Unless there's a better recommended one now.

[@EposVox]

The 12MTK is VERY different than the Behringer

[@MichaelVash7886]

@@EposVox so which is the better deal at this point?

[@EposVox]

If a multitrack USB mix is your goal, the Soundcraft is the cheapest/best option available atm

[@MichaelVash7886]

@@EposVox got ya. Just to make sure I'm looking at the right products. You mean something like this but adjust to how many channels I need. www.amazon.com/Soundcraft-Notepad-8FX-Small-format-Console-Lexicon/dp/B075SLJGGV

[@EposVox]

Oh whoops, I was mistaken as to which video this comment was on. That little one won't do what you want. Which "two mixers" were you referring to? the x1832 and x2222?

[@jdrum3053]

The Aux mix is if you have more then one person or a guest they can monitor themselves. Like a band would use floor wedges or in ear monitors. For the skipe/teamspeak and whatever else vox program you can use virtual audio cable software. I have those setup for my mix. I also found a Tascam 4x4 interface which works awesome!!! I’ll do a video of that it works in 4 modes. I love this thing. But doesn’t work for live band use which is not its intention. tascam.com/product/us-4x4/ any questions let me know!!

[@renesetling]

Yes the AUX is an ouput, not an input, and is used for individualy monitor mix, summed by the mon send fader

[@CappTech]

Excellent!

[@TheEli1963]

it use to have a low latency driver download in behringer site they remove glad that i have save my low latency driver, it really a must have

[@Pellbort]

Allen & Heath ZED60 10FX (or 14FX if you need more inputs).

[@EposVox]

Way out of budget

[@whatwouldjesusdofamily2408]

Thanks for the demo, I have mic gain issue where it just randomly fluctuates with mine, thanks for going over that, really helped me understand. And God bless you fam and know that Jesus Christ, God in the flesh, has given His life for your sake. Because of His great and deep love for you personally, God Himself became a man to pay for humanity's debt by dying in our place on the cross, and that man is Jesus Christ. God's love cannot and will not go against His own righteousness, so as Judge and Owner of His creation, our debt of sin had to be paid for, but only He could pay it because only He is righteous. And He didnt have to pay for our debt of sin but He chose to for our benefit. Yet we rejoice because our God is alive and well because He ressurected from the cross and conquered death so we could have eternal life, so just as Himself, those who believe will die but we will live again forever more in peace and joy in heaven and recieve His Holy Spirit now. Even though we have a righteous sentence to hell because of our sin, the eternal God has paid for our eternal debt by dying Himself on the cross so we could have eternal life with Him in Heaven if we place our faith in Him (John 17:3). Repent ( turn ) from your sins and turn to Jesus and He will surely forgive you because of His grace alone (Ephesians 2:8-10). Follow Jesus for He is a GREAT Savior, Comforter and Friend in good and bad times. Read the book of John in the Bible to know Him, it is Jesus' life, He is the Word of God in the flesh, He is God Himself in the flesh. And we do not use His unconditional grace and forgiveness as an excuse to sin, even though we are not perfect, but we are to desire to wholly devote ourselves to following Jesus, the One who loves us and forgives us. When I sin I am deeply grieved, I lament and repent, turning back to Him, and He righteously forgives me because He has paid for my sin. We do not serve Him to earn His love, we serve Him because He loved us first (1 John 4:18-19). When He came the first time in the form of man He came as a lamb to be slain in our place, but Jesus is coming back as conquering King, the Lion of Judah 🙏, and every knee will bow and tongue confess Jesus is LORD. 1 John 1:8-9 KJV - If we say that we have no sin, we deceive ourselves, and the truth is not in us. If we confess our sins, he is faithful and just to forgive us our sins, and to cleanse us from all unrighteousness. Romans 6:23 KJV - For the wages of sin is death; but the gift of God is eternal life through Jesus Christ our Lord.

[@DihelsonMendonca]

I prefer the Behringer Xenyx X2442 USB instead. More bang for your buck.

[@s51588]

Left side blue light is soo hard

[@JhonScarzo]

You seriouslly should rethink all that setup, and get something like a behringer x32 or a studiolive 16

[@EposVox]

You seriously should rethink all that comment if you think I'm going to change from using a $250 mixer that fits on my desk to a $1000+ console that is out of my budget, doesn't fit on my desk, and doesn't offer me any tangible improvements. wtf o_O

[@JhonScarzo]

@@EposVox didny really mean to come out rude.. i wasjust saying that if you're gonna keep spending money on all sorts of gear to get your setup running, you couls go a little further and get a seamsless solution, at least thats how i see it, you can forget about all that cabling and convoluted processes with a digital mixer, you do all that on the hardware, less cables, less boxes and less things to overcome, you could also look into something of presonus' usb range... Imo it would be a wiser investment, and you also get some futureproofing... So yeah, my bad if it came out rude but was just giving you what u considered a solution

[@EposVox]

Most of the digital mixers don't work at all for my needs. None of the software I use works well with giant multi-channel devices or ASIO drivers. I need separately-registered WDM audio devices. And I tried the PreSonus StudioLive 16.0.2 and it was a much worse experience than this one.

[@c-monky6760]

I can actually see the presonus in the vid under there, why was it worse for you? Not really understanding that one?

[@RobertShaverOfAustin]

I've had my Mackie 1202 mixer for 25 or 30 years now. Good preamps but not many features. Only problem I've had with it is the rubber feed turned into goo. Scraped them off and stuck new ones on. Good for another 20 years. Great investment. Here's a photo: reverb.com/item/4816057-early-mackie-micro-1202-12-channel-mixer-4-mono-4-stereo-compact-aux-in-out-desktop

[@TerenceKearns]

I had the 12 version of this (not the 18). Functionally, it was great. I understood it pretty well. However it was sheer crap. The quality of the electronics was aweful and the thing became progressively more bug-ridden. It would develop subtle faults which you had to discover the hard way. It's a terrible mixer. The ideas were great, but the execution was SHOCKING. It's no wonder pro-audio guy seem to start vomiting every time the name Behringer comes up. Having said that, I mixed audio for a band using the Behiringer X32 fully digital console. It is a fantastic unit. You can't believe it was manufactured by the same company. Actualy, the unit was designed by MIDAS so maybe that is why it worked okay. The faders were cheap and sometimes problematic, but the sound wasn't too bad. I'd have no problems reccomending the Behringer X32 CORE edition instead of something like the Xenyx mixer. That thing was really crap. Bad memories. Don't do it. Just don't. Seriously. Why would you want to hurt yourself. It's like stabbing yourself in the eye every time you discover a new "undocumented feature". Now I have an audio interface with ADAT which breaks out to an extra 8 io ports. The Presonus Studio 192 Mobile. This is perfect for an on-the-road application, but obviously needs a laptop to work because you're "mixing in the box". In other words, it comes with live mixing software. It has built in DSPs which allow you to do sound FX in realtime with no extra latency (beyong the minimal existing audio interface latency). It's a good solution for streamers I think. There are many similar offerings on the market (audio interfaces as in-the-box mixers with their own DSPs). Do the research.

[@EposVox]

I've done the research. Digital mixers and ASIO devices are great if you're JUST recording audio, but virtually useless if you need multitrack audio recording on the fly with video capture software and etc. There's a reason I stick with analog and deal with the issues.

[@Maghanashi]

Modmics are alright but the cable frays way too easily where it connects to the mic. Overpriced for it's sound quality and build quality. I wouldn't buy one again.

[@socialite1283]

Hmmm... a reviewer who couldn't use the auxiliary send lines?

[@EposVox]

Everyone has different use cases

[@socialite1283]

@@EposVox Correct. But to be unable to use the auxiliary sends is bizarre.

[@variananora]

4:40 DICSORD

[@EposVox]

Discord is the best

[@jatorr]

No...Dicsord is better. ( ͡° ͜ʖ ͡°) We all know you typo'd on purpose Epos.

[@harveyosullivan]

you might want to check out the Allen and Heath ZED series. www.allen-heath.com/key-series/zed-series/ . Very similar mixers but they are a much higher quality brand, Behringer (especially the Xenxyx series) is seen as a bit of a joke in the audio industry.

[@apollosillen509]

autofocus... gotta love it

[@EposVox]

Autofocus or intentional blur to go with the "mwahahaha" the world may never know

[@steevee1945]

It would have been nice to have your video content match your commentary. (2:00+)

[@EposVox]

I worked with what I had to display it visually. User manuals exist for a reason.

[@alexandrzatonsky]

May be behringer driver will help you a little with integrated USB (google BEHRINGER_2902_X64_2.8.40)

[@EposVox]

That's not the driver for this mixer

[@RockWolfHD]

Audio is so complicated... :(

[@DivinaaCreative]

You have to start with the basics, diving right in can be overwhelming. In 3 years I bet you will be very knowledgeable when it comes to audio!

[@RobBob555]

for someone tho purports to know about audio mixing etc.. having background music on ANY video with narration is a JOKE ! it ONLY makes it harder to hear what you are saying.....WE ARE *NOT* HERE FOR MUSIC !! get it ??