The Low-Down on the Load Stops for Rhino-Rack Vortex Aero Crossbars or Pioneer Platform Rack

Click for more info and reviews of this Rhino Rack Roof Rack:
www.etrailer.c...
Check out some similar Roof Rack options:
www.etrailer.c...
www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: www.etrailer.c...
Today we're going to be taking a look at the load straps for the Rhino Rack Vortex Aero Cross Bars, part number RRRLH2. The Rhino Rack loads stops help you carry different types of cargo on your vortex aero cross bars. The K-action lever allows you to adjust the load stops anywhere across your cross bars. They're made of glass reinforced nylon construction, so they'll be endurable and long lasting. The load stops are five inches high. It comes with a limited lifetime warranty.
Now that we've gone over some features, we'll show you how to get it installed. First thing we did is we take our strips here because this is a T track loaded stop. We'll remove our ink cap. Make sure that it's open. Slide it onto the track. Once we get it into place, we can lift up and clamp it.
Now we're loading up a ladder today, so we'll be using a total of four stops. In this instance, you would need to purchase a total of two kits. With both of our stops in place, we can grab our ladder and set it up against them. Now we can take our other two, and slide them firmly up against the ladder. Now we'll place our end caps.
If we wanted to, we could re-cut our strips so that they fit in where our load stops are at. But for today, we're not going to do so. Our load stops feature a loop where we can fit through our strap. For the secure down, our cargo. We have plenty of strap options here at etrailer.com, if you we're to need some.
With both of our straps in place, we're ready to hit the road. This is going to complete our look of the load stops for Rhino Rack Vortex Aero Cross Bars, part number RRRLH2.