10 speed transmission disassembly

Watch me disassemble a Eaton Fuller FRO 16210C transmission in 18 mins. This customers top plate was bad due to water damage causing a down stream failure to the back box. This unit is being torn down to get ready to get washed and rebuilt using new parts.#eatonfuller #10speed #trucking #diyrepair #diesel #etrtruckcenter
@etrtruckcenterenginedrivet8918
Check out our channel for an in depth video on how to build this unit from start to finish.
Please like and subscribe for more informative content on class 8 truck repair.
Have a good day 👍

[@joerangel611]

Good morning Thank You for sharing this video Your skills and expertise is ammazing

[@angelo_giachetti]

You know these guys make good money. They have skills.

[@user-pk4mq3oy5g]

Too bad schools and teachers don't wanna teach those skills

[@diesel961]

I've never dissambled or assembled one other than a synchronzer but fuck it i want to give it a shot. I have a donor 10 speed and I'm going for it. Thank you for this video

[@arifabedin606]

So good

[@etrtruckcenterenginedrivet8918]

Thank you for watching and glad you enjoy

[@joseduran3341]

Muy Buen video amigo grasias

[@SecretSex]

Super movie !!!

[@etrtruckcenterenginedrivet8918]

Thank you

[@ghostfr4k95]

I’ve been searching for a dam manual on how to disassemble this crap thank you so much

[@etrtruckcenterenginedrivet8918]

Yes sir your very welcome

[@eddiebartholomew9172]

But love the video I’ve been rebuilding for ten years build these everyday love to see how you build your 18 and 13 speeds.

[@etrtruckcenterenginedrivet8918]

Thanks for the comment. Glad you liked the video.

[@eddiebartholomew9172]

Also when you take the reverse internal snap ring out you can than just pull the key way and the main shaft will come apart in the trans makes it a lot easier than picking it up as one assembly.

[@joerangel611]

Thank You!

[@elmanugas7733]

Gracias a tus videos, acabo de desinstalar mi transmisión y la voy a reparar yo mismo, solo dime donde conseguiste tu extractor de rodamientos please, deseame suerte

[@JoseDuran-zc9ne]

Que buen vide amigo me es de mucha ayuda

[@etrtruckcenterenginedrivet8918]

Thank you for the comment man. Glad it helps

[@diesel961]

Where can i find that puller?

[@chalinp4886]

Where can I the g 54 time wedge and g230 berring driver punch will they work for a fro 15210c thanks for shareing you’re knowledgeable information

[@etrtruckcenterenginedrivet8918]

G&W tool company sells these tools you can call them and tell them what model transmission you are working on and they will set you up with the correct tooling.

[@eddiebartholomew9172]

Hey just little FYI when you take that reverse idler out you can bang on the back side of the pin it will take the pressure off the spiral snap ring and you can just pick it out so much easier.

[@robertmartinez3769]

What is the long term reliability after the rebuild. I heard they don’t last long. I have no clue about transmissions and need an honest opinion

[@robertoribeiropessanha3547]

Gostei 👏

[@etrtruckcenterenginedrivet8918]

Glad you liked the video sir.

[@pedroalcantar9006]

Muy bueno tus vídeos ..es de gran ayuda Gracias por compartir el conocimiento ganado por la experiencia animo y saludos desde Tampico Tamaulipas México

[@etrtruckcenterenginedrivet8918]

Thank you sir

[@moiseszuniga2388]

Que te enseño en este video

[@TrucNguyen-ns3hn]

🇺🇸

[@chalinp4886]

What’s the difference between the fro 15210c and the fro 16210c will the same counter shaft bearing puller work for the fro 15210c and fro 16210c on the front and back bearings what if the bearings are destroyed is there a puller to pull the cone race on the shaft only what puller did you use to remove the rear axilary shafts Left/right bearings did you make that counter shaft hook please help I found many tools on line just don’t know what to get thank you

[@etrtruckcenterenginedrivet8918]

If it’s a FR or FRO those transmissions all take the same tooling. As far as the broke bearing on the countershaft you need to cut it with a cutoff wheel or just carefully knock it off with a hammer and chisel. I have 2 hooks the red one is a hay hook from tractor supply the silver one a friend made for me.

[@YoYo-hy7xi]

Are you gonna remember how to put it back together?

[@dv-mitchellmcever8158]

Video is great but the shop is a real shit hole! Take some pride in the place you work! Clean it up and organize it! I would lose my shit if my place started looking like that.

[@etrtruckcenterenginedrivet8918]

Sorry about the floor. Yeah it’s a little rough but we don’t repair anything on the floor so we’re not too worried about it. We use tables and stands here at our shop. We would probably have cleaner floors if we “lost or shit” every time we got some oil or grease on it. But we deal in high work volumes here and focus more on getting the customer fixed and out in a timely manner.

[@Stefan_Dahn]

@@etrtruckcenterenginedrivet8918 3:00 Takes only 5 min a day to take the trash of the floor. Really great video, but clean up before Mama comes home. 😉 Especially cause xou expose yourself on KZbin and have time for KZbin comments. 😁

[@johnplatten8793]

This would never happen if we never had diesel mechanics lol so good bye the hospitals in SA 😆

[@etrtruckcenterenginedrivet8918]

🤷‍♂️ don’t understand

[@wooddawg4868]

This is all good but it's dying out fast. The automobile started mass producing automatic transmissions in 1949. City and tour buses went automatic in 1956. In the 1960s manuals were not produced and many cars were offered as an option saying they were for performance but not anymore. Here in 2022 going forward even the corvette doesn't offer any corvette with a manual transmission period. Now we see all new semi trucks being produced with automatic transmission, even CDL schools are training new drivers of tractors on automatics. Why it took commercial vehicles to change over to automatic transmission is beyond me but the cost was a factor as well as old school thinking.

[@miguelangelvalderrama1808]

Hey pero tu estas desamblando esa transmision como con odio 🤨🤨, imaginate que se rompa un diente de un engrane o salga un clip disparado y se pierda, o si confundes los engranes y luego no sabes donde van 🙄

[@etrtruckcenterenginedrivet8918]

If something breaks it gets fixed if it gets lost I find it in my drawer with a million others when they leave the shop there tip top units ready for years and years of reliable service

[@etrtruckcenterenginedrivet8918]

And there is zero confusion

[@moiseszuniga2388]

Valla un buen comentario, no como todos esos que dicen buen video ,otros que le dicen gracias por compartir , pura gente hipócrita falsa ,pero tú si dices la verdad

[@miguelangelvalderrama1808]

@@moiseszuniga2388 👍Asi mismo es gracias.

[@moiseszuniga2388]

Este video solo es para ver qué este wey está trabajando porque no comparte nada más que ver qué es un desordenado para trabajar

[@etrtruckcenterenginedrivet8918]

You should watch the video of me showing you how to build one of these units. This is just a video of me disassembling one of these units.

[@etrtruckcenterenginedrivet8918]

I share everything in that video it’s an hour and 50 minutes long