Exhausting (part 2) Pro Touring V8 Triumph Build - LS Powered Project GT6 - Ep24

[@FanatikBuilds]

More good progress, it's pretty amazing how something "simple" like an exhaust can really make the car look more complete! Special thanks to everyone who supports our shenanigans through Patreon and PayPal donate - you rock!

[@SubversionGarage]

The algorithm gods need to smile on this channel

[@FanatikBuilds]

THAT would be nice! 😄 Please share the project with your friends Chris! 👍

[@HomeBuiltByJeff]

Keyboard warriors love to complain about back purging. You are not making food grade components and it will be plenty strong enough for your use. AND if after a whole bunch of driving the very unlikely thing happens and it does crack, you can just weld it up again :D

[@FanatikBuilds]

Haha, it's contentious issue, but enough well respected and experienced guys like you say not to worry about it ... so I'll go with that!! Thanks Jeff, really great to have you apart of this series man! 👊

[@HomeBuiltByJeff]

@@FanatikBuilds Haha. I wouldn't call myself experienced, but thanks for the vote of confidence ;)

[@FanatikBuilds]

We're all learning, but you've been on fire lately man!

[@AutoMotivate]

Love yalls relationship. Something many folks are missing: a proper bond between son and father.

[@FanatikBuilds]

It's amazing to share the project together!

[@TheMeta6]

BaCkPuRgE!!! Called out by all the people who've never welded an exhaust in their lives!!! Good Job guys

[@FanatikBuilds]

Lol, thanks man! It has its merits but I think we'll be fine! 😉

[@FanatikBuilds]

Fun fact: I recorded the voice over at 3am this week, due to construction outside... and the need to get the video done! Do I look as tired as I feel?

[@juanenriqueperezreyna8180]

Nope you did a phenomenal job as usual 💪🙏

[@FanatikBuilds]

@@juanenriqueperezreyna8180 Haha, thanks man! 👊

[@bawbjusbawb6471]

You looked "exhausted" LOL Nah... Great job!

[@discmotoslots]

it seems fitting for someone such as yourself!

[@jesscneal]

Back purging is for weld snobs. This thing will outlast everyone complaining about it.

[@FanatikBuilds]

Haha, cheers Jess! 😄

[@Pedroisanickname]

The Brits commanded the attention of Enzo Ferrari with the Jag XJ and just in case there was any doubt, they gave to the world the very stout and sexy, Triumph GT-6. Can't wait to see this one setout on it's maiden LS journey. Cheers!

[@FanatikBuilds]

Thanks Pedro! We're also looking forward to that day, hope you'll enjoy the rest of the journey with us!

[@moonface978]

No one wants to watch someone do a half ass job , your attention to detail and level of thought are really admirable 💪

[@FanatikBuilds]

Thanks David, really appreciate that man. 😊👍

[@Yorkyscott]

This, Binky and the Alfarrari are the best 3 builds in my opinion

[@FanatikBuilds]

Means a ton Scott, thanks very much.😊 So glad you're enjoying our efforts!

[@Yorkyscott]

@@FanatikBuilds The standard of build by you and your dad is top drawer, your channel is great to watch and great choice of car.

[@FanatikBuilds]

@@Yorkyscott I really appreciate the encouragement Scott, hope you'll enjoy what's yet to come! 👍

[@colinthompson2298]

You should be extremely proud of your welding

[@FanatikBuilds]

Haha, thanks Colin, it's a process, but every time I pick it up it's more practice! Cheers!

[@romans8forging181]

Definitely think your choice for the exhaust fits the car perfectly, in my opinion.

[@FanatikBuilds]

Thanks Tim, glad you like it! Not traditional, and mostly driven by practicality, but I think it works well 👍

[@romans8forging181]

@@FanatikBuilds you really can’t go wrong with two pipes. Cutting the the rear pieces for them to sit makes the exhaust OEM

[@pauljohnson7may]

Good work being done with no rush, things go better when you take your time and think things out.

[@FanatikBuilds]

Thanks Paul, trying to get it done but also do a good job is a delicate balance! Appreciate it man 👍

[@lemmy9996]

You are in good company re the back purge arguement. Turbo Yoda ( al ) @ the skidfactory has gone over this "controversy" previously and he's with you.

[@FanatikBuilds]

Whew!... if the Yoda says it, it's a fact! That takes a huge load off!! 😅 Thanks man!

[@MrWaalkman]

Starting out with a Newfie joke. Perfect!

[@pashakdescilly7517]

I tried but couldn't hear the answer

[@MrWaalkman]

@@pashakdescilly7517 Starting, but not finishing... ;> But fear not, I've got one. Q: So why do Newfies want to see Quebec leave Canada? A: Because it will cut ten hours off of the trip to Toronto. Kinda like our Aggies jokes.

[@tylerbarrett6652]

As soon as I saw that Binky had 2 new videos in the last few weeks, I checked here.... and kept checking.... and you came thru. Thank you!!! They got Binky thru her first start now.... and I can't wait to hear what yours sounds like. You are doing an excellent job.... and I dare say I like your car a bit more than I like the mini.

[@FanatikBuilds]

Haha, when they mentioned the next video would be out "soon", I wasn't exactly holding my breath... but they did it! Thanks Tyler, it really means a lot, and we're honoured that you like the project so much! Cheers 👊👍

[@SkylarkCamperAdventures]

Best part about this video...the interactions between you and your dad, shows just how much you two enjoy working on the project together 👍🏻...oh and cracking video once again 😀

[@FanatikBuilds]

Thanks my friend, it's been a long time, and there's a ways to go, but we are enjoying the process together! I think Dad's more ready for it to be running than I am.😄

[@bscoffeeandwelding7236]

Just binge watched your whole build since it's a cold overcast day here in NZ, have loved it almost as much as Binky and the sly references to the people we both watch are great, bring on the rest of it, good luck Shirley and Dad cheers for the entertainment.

[@FanatikBuilds]

Thanks Brian, welcome to the project and glad you found it! The encouragement is greatly appreciated and I do hope you'll enjoy what's yet to come. All the best from Canada! 🇨🇦👍

[@jabobpow]

This build is incredible! Have you thought of possibly filling in the cutouts in the bumper for the exhaust tips by welding in a concave plate? If that makes sense haha

[@pashakdescilly7517]

I agree, a trim around the cut-out in the rear valence panel would look good

[@FanatikBuilds]

Thank you! Absolutely, they're just rough cuts right now to get the pipes in place. We'll come back and finished them off properly later on! Cheers! 👍

[@RichMcCabe]

I am a TIG enthusiast but in all fairness you can go to a exhaust shop and have stainless exhaust installed and TIG'd and they do not back purge. If you are building a turbo race car then thats different. You did great.

[@FanatikBuilds]

Yes! Turbos change things, at least everything before it should be purged. Thanks Rich, can't wait to hear this thing!

[@djsandvig1]

Top notch work…..perhaps a debut at the Detroit Autorama next year? Then come back for the Woodward Dream Cruise next summer! I just want to see this little beast in person!!!

[@FanatikBuilds]

Ha! Not sure about that, but it would be fun! 😄 Thanks Dennis, hopefully it will be done enough to make some public appearances someday!

[@jamesdeath3477]

Top stuff. Really one of my favourite builds on YT.

[@FanatikBuilds]

Thanks James, really means a ton!

[@DatBoiOrly]

0:50 god damn those lucky folk able to watch it all in one go i envy them tbf

[@FanatikBuilds]

Haha, I feel that way with Binky! 😄

[@DatBoiOrly]

@@FanatikBuilds im in the same boat tbf. XD

[@davidmotoman4956]

Good to see you are taking the time to do it Right. Very Much enjoying the build my friend. Dave from Australia

[@FanatikBuilds]

Trying to at least! 😄 Thanks Dave, really appreciate it - hope you're well and all the best from Canada!

[@dustinthecouch2466]

The ingenuity used to complete complicated tasks that are repeatable is mind boggling!!! Thumbs up on another great and informative video!!!

[@FanatikBuilds]

Haha, ah, thanks man, really appreciate it! 😊

[@bawbjusbawb6471]

This is a GREAT build gentlemen! For what it's worth, I used to work in a muffler shop and many cars used to have resonator tips (Cadillacs and T-birds just to name a few). Also, your work on the exhaust, although it seemed to take a lot of time is a world better than you would get from your average exhaust shop.

[@FanatikBuilds]

Thanks very much, it's appreciated! We're still learning, but have to say we're fairly pleased so far with the results! Cheers man 😊👍

[@agkracing140]

This is my first time watching one of your videos and I have to say you do a fantastic job putting them together! I love the research you do and information you share. I have a 1972 MGB GT and it looks like your videos are going to give me some inspiration for my build. Nice work!!

[@FanatikBuilds]

Welcome man, glad you found the project! Really appreciate the kind words, it's very encouraging and means a lot. Have fun with your B GT, those are great little cars! 👍

[@jarkkonieminenprotuning]

you can use also root welding paste if you need smoother weldings inside stainless pipes. Fanatic builds is one of the best channels in youtube, i hope you get much more subscribers.

[@FanatikBuilds]

"Solar Flux B" is the one I've heard most about - general consensus is we should be ok though! 🤞 Thanks Jarkko, means a lot and I also hope that happens soon! Please tell your friends about the project! Cheers man 👍

[@2ToneWalt]

It is so important to get the exhaust to look right cos it's gonna hit you in the face every time you walk towards the back of the car. I don't think you are gonna have that problem cos that looks fantastic. 👍

[@FanatikBuilds]

Thanks my friend! It was a tense moment taking the grinder to the body there, but tucking the pipes up really helped tie them in visually - thank goodness too, I'm not a fan of wasting time and effort! 😄 Cheers man

[@Papa-Bogey]

“Weld done!” More dad jokes please!

[@FanatikBuilds]

Duly noted! 😄👍 cheers man!

[@idriwzrd]

As a dad myself, I found that joke highly appropriate.

[@jimbranham3281]

You and your dad are doing an amazing job keeping everything on the exhaust symmetrical. I think putting in a channel/tunnel to fill in the cut out part of the rear valence is a good idea for looks, as well as rigidity. I can hardly wait to see the finished product. I'm sure it will sound as good as it looks. It is just mind boggling the quality of work you two are putting out from that tiny garage. It just goes to show you that the most important tool a fellow can have is the one between his ears, not the one in a toolbox or the size of his garage. I'm sharing this video to Facebook as I always do with your work. I too like the car you mentioned... but I absolutely love your Triumph!

[@FanatikBuilds]

Hey Jim, it's great to hear from you! You are always such a huge encouragement to us and it really is appreciated! The cut outs are just rough for now and will get finished up later, don't you worry! Gosh, the Eagle Speedster is $1M ... that's one heck of a compliment! 😊 Take care, and thanks my friend

[@thechumpsbeendumped.7797]

That’s the prettiest wheelbarrow I’ve ever seen.

[@FanatikBuilds]

Just needs some rubber handle grips and it's set! 😂 ... it'll look much better trimmed down!

[@thechumpsbeendumped.7797]

@@FanatikBuilds Before you do that, give Brian a call and so he can come and test out your welds. kzbin.info/www/bejne/d2HZcoRqhdCUhLM

[@FanatikBuilds]

@@thechumpsbeendumped.7797 I honestly think that dude could just lift our whole car... Wait... Why have we been bothering with the wooden piles all this time?? 😜

[@thechumpsbeendumped.7797]

@@FanatikBuilds You couldn’t afford him. I’m beginning to think the algorithm has a sense of humor, Brian’s video was the very next after yours that it suggested. 😉

[@craigbarrett2278]

Always therapeutic viewing...... What about just a slight downturn as it comes out of the rear valance? Would also stop potential water ingress..... Hats off to the pair of you for the amazing work.

[@FanatikBuilds]

Thank you Craig! Likely no to a downturn, but some drain/weep holes will help with the water issue! Hope you'll like how it ends up in the next episode 👍 Cheers man!

[@mordillokiwi]

I use to work as a engineer for a big aftermarket car parts company. Most aftermarket exhaust companies do not back purge. If you were doing turbo manifolds maybe. Basically, from my experience you'll be fine! Be sure to allow plenty of room for expansion!!

[@FanatikBuilds]

Awesome! Thanks Jason! Room is the issue on this car, but we've tried to leave as much as possible... time will tell! 😄

[@Mrxguy]

Hi and thank you. I've just binge watched your series on the GT6. AWESOME! Can't wait for the next update. Very impressed that you are doing it in a single garage with minimal tools. cheers

[@FanatikBuilds]

Really glad you found the project man! Thanks for the support and I hope you'll enjoy all of what's to come! 😊👍

[@Mrxguy]

@@FanatikBuilds :)

[@WhackADoRacing]

She's going to have one Hell of a singing voice! Great work guys! The exit through the valance looks great and compliments the size of the exhaust compared to the original pipes. Good stuff.

[@FanatikBuilds]

Certainly hope so, never had a V8 before! 😊 Thanks man, appreciate it a lot!

[@l9jjp]

You have the right to be bragging with the amazing engineering you guys are turning out . Once again really enjoyable content ..awesome work

[@FanatikBuilds]

Haha, thanks Jay, we're still learning but it's great to be moving the build along!

[@robertbisson9161]

You guys are great, keep those video's coming, cannot wait to see the next one. (Pure Canadian content )

[@FanatikBuilds]

Cheers Robert, great to hear from you! 👊👍

[@robhj9933]

This has to be one of my favourite YT builds (along with Binky of course!). Only problem is I now keep looking at my poor old standard GT6 Mk3 and just wondering what I might be able to do to it.....

[@FanatikBuilds]

Haha, there's always something else that could be done, I know the pain Rob! Thanks for the kind words, I'm so glad you're enjoying the project! Cheers 👍

[@mattpovah5952]

I also find myself gazing longingly at awesome cars to the point of awkwardness. I have a great pic of an old friend whose entire body language screams yearning as he looks at an antique Corvette we saw on the street one night. It's a condition.

[@FanatikBuilds]

Or a disease. 😬

[@assessor1276]

Nice work guys - still very impressed!

[@FanatikBuilds]

Cheers Max, really do appreciate it man!

[@GarageItYourself]

Looking good dude and your TIG welding is pretty darned good for a beginner so I wouldn't worry too much about the internet warriors 😉

[@FanatikBuilds]

Thanks man, means a lot! 👍

[@lynnvogel7316]

Pretty phenomenal video!! Appreciate the spirit and the attitude in which you approach the challenges and how you tackle them one by one, and especially how you lead us from problem to result!!

[@FanatikBuilds]

Thank you Lynn, means a ton - really glad you enjoy what we're up to! 😊

[@herbiederby3394]

I'll call this one patience is a virtue wow for the first time doing exhaust system you hit the nail on the head ...and almost complete too.....looking super man...💯👍🤙

[@FanatikBuilds]

Thanks buddy! We're pretty pleased with it so far, and it'll get finished off next time 😊 Thanks for the continued support and encouragement!

[@mchristr]

Binge watching the series again. That exhaust is near perfect: tasteful, simple, and stainless. Very nice work.

[@FanatikBuilds]

Hey that's awesome, thanks for the support! Glad you like it, I'm quite happy with how this turned out 😎✌️

[@paulresca6681]

Another great step toward the completion of an incredible build. I’ve commented before about the amazing interaction and fun you both are having. It makes this whole journey more impressive. Thanks

[@FanatikBuilds]

Thank you Paul, means a lot and we're really glad you're enjoying our shenanigans! 😊

[@garybrown4854]

Loving this shed built restomod , I'm from the UK and the GT6 is one of my favorite cars of that era , oh and I like your video style and sense of humour . can I suggest you slash cut the tail pipes to match the angle of the valance , if that's possible , looking forward to the next episode .

[@FanatikBuilds]

Thanks Gary, that's very kind of you to say - I'm glad you're enjoying the project! Stay tuned for the finishing touches, I think you'll like what's planned! All the best from Canada 👍

[@dmjunqueirarv]

Just commenting for the algorithm... So that fewer people can blame it! 😉 Nice job as always!

[@FanatikBuilds]

Haha, thanks for the help Danilo! 👍

[@aussiebloke609]

6:22 The Dacia Sandero? Bloody Nora!

[@FanatikBuilds]

"Wooooow!... anyway..." 😉

[@michaelterry9257]

Loving this build

[@FanatikBuilds]

Thanks Michael! Really glad to hear that! 👍

[@juanenriqueperezreyna8180]

This was awesome 👏 Well done 👍 Can’t wait for the next episode 🙏🙏🙏🙏🙏🙏🙏🙏

[@FanatikBuilds]

Thanks Juan, great hearing from you man!

[@guywilson187]

Great job on those sleek pipes 👍 They'll look amazing with the finishing touches applied. I hear what folk are saying about the purging but man, those TIG welds look professional next to the machine welded seams on the resonators. Great stuff, keep it up 👍

[@FanatikBuilds]

Thanks Guy! Leaving the 1/8" material beside the factory weld worked out great, I rarely had to add filler - which is why they look ok! I still suck at adding filler. 😄 Cheers man!

[@josephmcclure6229]

Looks great!!!!!!!

[@FanatikBuilds]

Cheers Joseph, appreciate it!

[@JONNYCABANI]

This is a fantastic build. Great job!!!

[@FanatikBuilds]

Thanks Jonny, really means a lot!

[@MrGpsjim]

Quality job, love it!!!

[@FanatikBuilds]

Thank you, appreciate it!

[@tonigon5767]

I always look forward to your updates. Consider finishing off where you cut the valents by making a a rounded piece that fits around the pipe and you can weld back into valents (like an inverted channel) that the exhaust tip fits in with an even gap around it. It might look quite cool.

[@FanatikBuilds]

Yep, these are just rough cuts to get the exhaust in place - we'll come back to finish them off later! Thanks Toni! 👊

[@halnywiatr]

@ 6:12 Random Wilhelm Scream.

[@FanatikBuilds]

Nothing but the finest stock sound effects around here!

[@daddosjeffery]

Your attention to detail is mind blowing, this is going to be the cleanest little beast out there, love the channel and keep it up mate 👌

[@FanatikBuilds]

Really appreciate that Adrian, means a lot man! 👊

[@SB-vb8ch]

Looks awesome, your attention to detail & welding is amazing. I've been building an LS powered British sports car for a while so can appreciate the time & effort taken. Keep it up!

[@FanatikBuilds]

Thanks very much man, really appreciate the encouragement! What car are you squeezing an LS in?

[@SB-vb8ch]

@@FanatikBuilds 1978 TVR 3000M. It has got a bit out of hand...started as an LS1/T56 & has ended up with an LS3/T56 Magnum & twin GT2871R turbos. We all enjoy a little mission creep! I'm UK based so LS stuff is a little more rare. I think you outrank me for mission creep though!

[@FanatikBuilds]

Gosh, you'll want to go with boost by gear or speed I'd say! That'll be insane man, have fun with it and go carefully! Honestly I don't know anyone personally with an LS swap, so I still like to think of this as a bit unique * ... among my friends at least! 😊 It's the LS4 that really throws things for a curve-ball! Cheers man, all the best from Canada!

[@SB-vb8ch]

@@FanatikBuilds It's running Emerald M3D K6+ management so has most of the control options. I've got wheel speed sensors as I've been through the suspension & drivetrain so boost by gear, launch & traction control are all there. It won't be long until you're driving yours though.

[@codejackz]

Fantastik work, well done!!!

[@FanatikBuilds]

Thank you Robert! Means a lot!

[@stephenschofield2836]

You do know that Richard Brunning and Nik Blackstock have a copyright on woohoo? Good work lads :D

[@FanatikBuilds]

🤫 ... Thanks Stephen!

[@SuperDougal22]

More great work, well done. I’m really impressed with the quality of your welding and imaginative solutions to making all that engine/driveshaft/exhaust fit under such a small body. I’m getting slightly worried that I’m starting to recognise the underneath of your car better than I probably should! Keep the vids coming.

[@FanatikBuilds]

Thanks man, it's been a tight squeeze in places but it's pretty cool seeing it all in there! Haha, yeah, there is a bit of that, after the next episode we'll push out front for a change of pace! 😄 Cheers!

[@scantronsgarage]

ha! Cool test !

[@FanatikBuilds]

Pretty cool that something you can see through, can be so effective!

[@RobHealey]

I voted against the rear lip but it's grown on me and now I prefer it, makes the car a little bit more special

[@FanatikBuilds]

Haha, funny how it works sometimes eh! We've removed it for now, but will likely try it out again when we address the front end later. The two together will tell us what's needed. 😊 Cheers Rob 👍

[@charlesbourgois4571]

Awesome job guys. Love to watch you making progress.

[@FanatikBuilds]

Thanks Charles, it's great to have you along for the ride with us!

[@charlesbourgois4571]

@@FanatikBuilds A ride. That would be fun in that little thing. I always told my kids when they were growing up not to let not knowing stop you from trying. What's the worst that could happen? You could screw it up, sure. But you had some fun and learned a few things along the way. And with Dad. No price on that. Can't wait to hear it run.

[@mattpovah5952]

Those are really nice welds. I wish I could weld as well as that.

[@FanatikBuilds]

Thanks Matt, still learning, and it's really (like really) helpful to just fusion weld on pulse mode... I still suck majorly at adding filler, but some what I've done looks ok ... from 10ft! 😄

[@ferrumlynx1914]

I’m really getting Aston Martin V8 Vantage vibes with those rear pipes!

[@FanatikBuilds]

😊 Hehe, not a bad car to get vibes from!

[@2512MaTHias]

„Project TRinky“ is once again really entertaining fun to watch… thanks for another video, and I‘m looking forward to see the next one 👍 😁

[@FanatikBuilds]

Thanks man, always great to have you along for the ride! 👍

[@hippycow1006]

That’s super awesome, glad you’ve got the exhaust done, it looks great!

[@FanatikBuilds]

Well, almost done! lol. Thanks man, great to hear from ya!

[@hippycow1006]

@@FanatikBuilds well yeah, I’d call that close enough to done😂 I don’t think i would ever trust myself to make a leak free exhaust, so its really cool that you guys are doing it on your own

[@morethanrust8653]

Damn this is coming together well, keep up the good work

[@FanatikBuilds]

Thank you, will definitely try to man! 👊

[@geoffburrill9850]

Exhausting! Sorry looking very smart.

[@FanatikBuilds]

Ugh, I'm silenced by the exhaustion! 😉 Cheers Geoff!

[@craigwhite7698]

I would cut the tail pipes about two inches beyond the rear valence at the same angle as the valence.

[@FanatikBuilds]

Stay tuned Craig, thanks for watching! 👍

[@jdwxly]

Well done! But I am a little disappointed that no one said, "make the noise."

[@prospero4183]

And no funk

[@FanatikBuilds]

**Beep beep beep** !

[@patireland9408]

First engineering project was the installation of an argon glove box for - yes, welding. No back purge required as all the environment was argon. Vacuum tube seals can have no weld impurity. Different world from garage fabrication. You do great work. Impressed with those welds. My SST garage welds were done with an arc. Lots of grinding. :)

[@FanatikBuilds]

One can only imagine the amount of gas required for that kind of work! Thanks Pat, great to hear from you 😊👍

[@theoriginalwallace]

Woohoo, Michael! I've been patiently waiting for this video! Awesome work as per usual! Ploughing on with the Viva getting it ready for exterior paint... I know I'm going about it the wrong way round doing this before the engine bay, interior & underside, but I'm retaining the small amount of original patina & matching the new panels & any small nicks/dents that happen during the build will add to it's character. Going to be a bit of a trial, but hey, I'm artistic that way!! Cheers. Leigh. PS: None of my stainless exhaust systems on all of my builds have fractured due to the lack of back purging... I use my modified classics hard, usually on a daily basis (I may be slightly insane in using a classic car this way in our Scottish climate, but it is enjoyable)! However, I do back purge anything that is before a turbo.

[@FanatikBuilds]

Great to hear from you Leigh, and glad to hear you've been making progress! Paint is a very exciting stage to be at, and I look forward to the day we too are there! Appreciate the personal feedback on purging, I really do feel at this point enough respected people have said not to worry, that we should be fine for quite some time at least... and if it ever does crack... we can just weld it up again! Cheers and all the best buddy 😊👍

[@joeharrington595]

I believe the word is "more better"

[@FanatikBuilds]

Ah, my apologies! 😉

[@fredericrike5974]

OCD can be a very good thing indeed! Oh, look, there on the horizon....I can almost hear it! .....vroom......... FR

[@FanatikBuilds]

Can't wait for that day! 😄 Thanks Frederic!

[@fredericrike5974]

@@FanatikBuilds For the record, Binky just may finish before LS GT- but at close to seven years on. Both are fantastically complex re imaginings of what the original cars were and both have the DNA to do it well. If you and dad don't get sidetracked on an Escargot sort of thing, I believe you can easily get this done from first rust repair to rockin' a road trip in a measly six years! FR

[@FanatikBuilds]

Haha, well, I'm sorry to say Fred that we actually bought the car in June 2014, so we've already failed your premonition! 😬 ... there have been many months where we haven't touched it at all though, as life just gets in the way sometimes! I hate putting timelines out as I enjoy the build process, but it would be amazing to see it painted next year and ready for final assembly! Whatever happens, you'll see it here! Cheers man and take care 😊👍

[@fredericrike5974]

@@FanatikBuilds Well, I tried to score the win for ya'll! Indeed, life does get in the way. Something for your copious free time; someone else has been exploring the GT 6 in a different direction- it's FWD and fast; go see Black Salt Racing's "re imagining'! the pan says I'll be here- but as we both know- life can get in the way! FR

[@FanatikBuilds]

@@fredericrike5974 I've seen that one! Absolutely insane car! Cheers Fred, have a great day! 👍

[@karlalton3170]

Great job bud 👍 despite what you think your welding is defiantly getting much better , i also have never gas purged an exhaust while welding and i have done loads of stainless on turbo diesel Range Rover conversions and never had a problem Your one step further to driving it 😁😁🤘🤘🤘🤘

[@FanatikBuilds]

Thanks Karl, really appreciate that! 😊 Good to know you've had success without purging, that will help me sleep easier! Cheers man! 👊

[@WanderingDad]

Was kinda hoping we were going all Bosozoku for a minute. Wouldn't even have been the biggest Left Turn at Albuquerque moment in this build.

[@FanatikBuilds]

Haha, you weren't alone in thinking that! We wouldn't do that to you guys though 😉👍

[@johnnierohnson3889]

Dude you are my new favorite KZbin Creator. I find your work and effort entertaining and enjoyable. I also place your work and content as superior to all others because you go into more depth and explanation of the process to this witchcraft..lol..thank you so much. You are inspirational and I appreciate every ounce of your effort and dedication. Thanks Ronnie..

[@FanatikBuilds]

Really appreciate it Ronnie, that means a lot! 😊✌️

[@peterhatch1583]

The power is going to be crazy to the weight just love this project and again best wish for your dad!!

[@FanatikBuilds]

Thanks Peter!

[@KingNast]

This is valuable info for me! I just bought a GT6 and should be picking it up today. No rust, fortunately, but it's nice to see the entire construction of the car for when I need to do repairs. You guys are doing a great job.. can't wait to see it completed

[@FanatikBuilds]

Congrats! Not sure how helpful these newer videos will be seeing as very little of the original car is left, but the earlier stuff may prove useful! Cheers and welcome to the Triumph family! (make sure to oil-spray the heck out of your car to keep it rust-free!)

[@KingNast]

@@FanatikBuilds Thanks! I did watch all the earlier videos, and I'm now terrified of rust! Gonna have to get some fluid film or something

[@ghan6633]

That is freaking awesome and you have left room for rear mounted Turbo's too!!!

[@kma4444]

I have built lots of race car headers, that have had very rough use. I don't back purge but I do use Solar Flux. It's not expensive and does a very good job. Cheers!!

[@FanatikBuilds]

Thanks, heard good things about that product, maybe for a future project! Cheers Mallen👍

[@okok-gg5fl]

Pipe dream:)

[@MoondyneJoe]

I love your attention to detail, and hope when you finish this car that the covid-19 is gone and you freely can enter it in as many car shows as possible you will need to build a pool 🎱 room with heaps of shelving to display all your awards on. It doesn't matter how long it takes to finish as half of the fun is the journey to create such an awesome creation. What an excellent way to share with your father these memories in building something you both enjoy doing. Do you have any idea how many hours you have into the Triumph so far? Very impressed guys. Tony from Western Australia 🇦🇺

[@FanatikBuilds]

Ha, we also hope the pandemic will be over by then man! It would be great to take it to some shows for fun, though we also plan on driving it a bunch! As for hours, we've never bothered keeping track... I think it would be a bit depressing! We got it back in June 2014, so I'm sure there's "more than a few". 😄 Cheers Tony, all the best from Canada!

[@MoondyneJoe]

@@FanatikBuilds I wonder who has been going longer on there vehicles, you and your Dad or Nick and Richard on project Binky? Time spent on a Hobby isn't classified as waisted or work so it really doesn't matter how long it takes! Have you considered what vehicle will be next grin or will you have had enough after building this one? Looking forward to your next video 😁 Tony from Western Australia 🇦🇺

[@FanatikBuilds]

@@MoondyneJoe Good question! Their first episode was uploaded just under a year before we bought our car, and they would have put a few months of work in before that was released. I'd say we're about a year behind them at least. We've also taken a lot longer to build everything as we have no idea what we're doing! Next vehicle has already been purchased and will find it's way onto the channel at a point - not the same calibre of project as this one, but there's time for more craziness in the future! Cheers Tony, all the best from Ontario Canada! 🇨🇦👍

[@MoondyneJoe]

@@FanatikBuilds I commented to nick and Richard that the way they had done Binky it must have completely paid for itself by now with the way they have structured the whole build on KZbin they basically gave me a thumbs up a couple of (and behind the scenes people) very smart chaps when you think of it get your channel to pay for your complete expenses.... You don't give the indication of not knowing what you are doing, a lot of your build is very technical the steering setup alone was complicated and engine, gearbox etc in many ways I think your build is far more complicated than Binky Have you tried to get sponsors? (only take them under YOUR CONDITIONS not what they want) I hope you consider finding a bigger workshop for your next build! and maybe invest in a hoist? Bugger this laying under a vehicle struggling 😁 Are you going to paint the car yourselves or assist a panel Beater in doing it? BTW have you come across SuperfastMatt yet? He has a fascinating build on the go right now I think you might like and he has a very good sence of humour Looking forward to your next video Tony from Western Australia 🇦🇺

[@FanatikBuilds]

@@MoondyneJoe A larger shop and hoist would be great, but aren't happening for some time, sadly! Eventually, is the plan. Painting will be done either in the garage (everything else has been so why not?!) or in a booth if we can rent one. It'll be a learning experience but I've had some practice before so we'll give it our best shot! Yes, I've seen Matt before, he's a cool guy with great ideas and a similar approach of making random parts work together - thanks Tony, cheers!

[@Mtlmshr]

Top tip from long time Fabby, don’t chamfer the edges of the tubes leave them as sharp as possible because that gives you more material to help you tack them together without having to add any rod. When you tack your tubing together as long as the tube edges touch you should be able to tack them together by just putting the tungsten right in the center of the joint (and if your temp is set just correctly) you should be able to go “on & off” with the pedal and create a perfect tack with no filler rod.

[@FanatikBuilds]

Thanks for the tip! Makes a lot of sense! 👍✌

[@murraymadness4674]

Looking good! I also did the hole (one pipe for 3-cyl engine) in the valence in my Midget, tried to flare/ridge that hole instead of a flat cut..just to give you even more tedious work ideas.

[@FanatikBuilds]

Yep! It's just a rough cut right now, finishing will come in due course! Thanks man 👍

[@iamFus86]

I get just as exited for these video's as a binky's :D How about the ducktail?

[@FanatikBuilds]

That means a great deal, thank you! Ah, still undecided on it... you'll see it's gone in most of this video... think it will be easier to tell once we've got the front end coming back together again. Cheers man! 👍

[@iamFus86]

@@FanatikBuilds :D

[@baronvonteuchter1412]

Great job, looks awesome!

[@FanatikBuilds]

Thanks man, means a lot!

[@pcar928fan]

Can’t wait to see this finished! Too bad you didn’t make two of everything along the way to make a 2nd one much easier to complete! Gotta be more people than you and I who would love this!

[@FanatikBuilds]

Haha, well, we did actually, but it may not have come across that way on video! Gosh, of the millions of car enthusiasts on this platform, I've got to think you're right... now if KZbin could just show them this series, that'd be great! 😂

[@pcar928fan]

@@FanatikBuilds I need to share your builds on my FB page again. I put one up a few months ago. Need to do it again. Really loving what you guys are doing with this build. I can’t wait to see it done…I can’t even imagine how anxious you are to actually drive the thing…how long has it been? 4 years now?! Holy cow. One thing for sure, when you are done, there is no job on a car from design to fabrication that you won’t be able to do!! I think you have about a zillion avenues for future car careers you can pursue!

[@FanatikBuilds]

Thanks James, do appreciate the help and support! 4 years would be nice - it's actually over 7 since we got the car! 😬 ... we're just slow... and newbies who want to do it right! Dad's chomping at the bit to see it driving, and I understand, though I'm also enjoying the journey! Cheers man 👊👍

[@mgbchuck6527]

Still enjoying how nice your making your car (my sbc MGB will NEVER be as finished) but mine has a little plus side, going to hit 6000mi with it next month. Other then the high maintenance engine mine V8LBC has been reliable. Keep up the beautiful construction, can't wait to see it driving. One Big Fun thing you will find to do with it will be All British car shows (going to one in Oct.), peoples reactions (positive/negative) are interesting for sure. be well be safe-------------------------------------Chuck

[@FanatikBuilds]

Yours is on the roads, that's a win! 😄 Thanks Chuck, means a lot and I'm glad you're enjoying the series!

[@jubalwright421]

Awesome build, keep it up, this car is going to be cool as hell and a blast to drive

[@FanatikBuilds]

Thanks Jubal, we'll definitely try our best to! 👍

[@lpruler1]

+1 for the Dacia Sandero

[@FanatikBuilds]

"Good news!!"

[@MarioFunk]

Ha! @ the Dacia Sandero reference 😂

[@FanatikBuilds]

"Good news!!"

[@bigbird2100]

Great video 👍 Don't worry about back purging just get your complete exhaust copied will be cheaper than argon , careful when using those carbide burrs in an air tool vicious!

[@FanatikBuilds]

Lol, maybe, but that's not exactly on the agenda Sean! 😄 Yes I can imagine the extra RPM would make them quite a bit more rapid!

[@mobiledevto]

I'd like to know how you're getting any work done in the Ontario heat right now?

[@FanatikBuilds]

Lol, thank goodness it's finally cooled down a bit, it's been almost unbearable lately!

[@notpurple]

so many python airplane and top gear drop ins..... LOVE IT!

[@justinrobertson5493]

Al from the Skid Factory doesn't back purge either. He has said that using the wrong amount of heat causing the sugaring, but I've never done tig welding.

[@FanatikBuilds]

If Turbo Yoda says that, it's good enough for me! 😄

[@DatBoiOrly]

22.35 you could cut it back further than the rear belly pan weld a pie slice in weld an a Y pipe in then you can have the cool twin swept up exaust tips you wanted.

[@FanatikBuilds]

It's an option! Though we're pretty happy with the duals, cheers man! 👍

[@DatBoiOrly]

@@FanatikBuilds if your happy I'm happy with it! just pointing it out as a possibility if your not happy with it in the future once you've got it fully assembled.