HomeMade 212cc Engine CVT Clutch - Full Video

HomeMade 212cc Engine CVT Clutch
Torque converter for 6.5hp 7hp 12hp engines , predator engines and other engines.
for Homemade projects : gokart, car, buggy, atv, quad, mini bike, trike, tractor and more...
full video of the Atv quad : • Homemade ATV QuadBike ...
cheralauto.com/
Email : [e-mail]
Facebook : / cheralauto
Instagram : / cheralauto
Blogger : cheralauto.blogspot.com
Twitter : / cheralauto

[@mopedmessiah]

I could be wrong, but just from the close up of you revving it with it off the atv, it really looks like the variator you got doesnt have hardly enough travel closing to actually make good use of the cvt. Most scooter variators have more than an inch of travel along the boss to close, yours looks to only go a fraction of that. Its a cool idea with how you did it, but i think if you used an actual scooter variator itd have way more range and ratios

[@blackpit3147]

Very well! Cool idea! I really like it! I love these designs, especially home built ones! Big like! Definitely a Subscription!

[@liamnparadise1955]

Very impressive and a genuis idea, keep safe, kay Ma discover ra lagi ka.

[@stephangeagea6151]

Your work is good, well done. I congratulate you on this ingenious skill. I love you. I will support you with a like and a subscription to the channel, and I tell you to continue.

[@SrColon309]

Wonderful job my friend! 👍👍👍

[@TravelogsIndia]

man! you are a genius !!! i am thinking of doing something same with geared motorcycles. thanks for the idea..

[@CHERALAUTO]

Welcome

[@jgstv1331]

Le

[@249renanhipolito3]

Parabéns pelo vídeo

[@Baldys_projects]

Cool idea I actually thought about doing this by cutting them back half of a scooter transmission off and mating it with a go-kart engine with a variator on the front, on a side note them shocks look way too stiff looks like it's a go-kart without shocks lol.

[@oikeaihminen]

Thank you, i used this innovation my projekt👍🏻

[@epicmaster9831]

e davvero un ottimo veicolo il prossimo video lo voglio vederlo al mcdrive

[@gioncaezar2335]

really very creative friend, always successful, greetings from Indonesia

[@fuhkoffandie]

if you loosen that belt a little bit, you'll notice a huge improvement in the gear ratio change. you have to leave those belts on those cvt's loose, it allows for the gear ratio change. it starts out where the engine pulley is small, & the back pulley is large. as the RPMs increase, the front pulley becomes big, and the back pulley becomes small. this is your gear ratio change, and you should be able to see the CVT belt changing as this happens. yours doesn't move, I think it's just too tight it stays in one spot. should notice a 10 to 20 mile an hour increase, and still have the takeoff torque. but yeah, you have to loosen that belt.

[@niteshpingale8336]

And for rear wheel he need same gear ratio (for chain) i think same size gears because cvt output is already for wheel different gears for changes speed and consumed more fule

[@VirberelloScooterTips]

Thank you for creating such an informative and entertaining video on KZbin. Your hard work and dedication to the topic really shines through and I appreciate the effort you put into it. Keep up the great content!

[@CHERALAUTO]

thank you

Top demais amigo, parabéns pelo projeto inspirador.

[@user-xt4tt9vp4w]

เมสซี'นำมาซึ่งการที่จะต้องทำอย่างไรบ้าง

[@nguyenkhanhsg3101]

hi you have a great idea it's very good wish you good health

[@witosarlaw]

Mantap bang... cocok untuk go kart

[@jamesdelk8926]

Now you got 9ut door drilling equipment cool

[@manuelfranciscohernandez3125]

what did you do with the piston and crankshaft

[@bengo76]

The transmission gear weldings will stand by such forces?

[@ilhamrizqi5216]

I think it will be more better if the sprocket has a same size. But nice work

[@elgatitogamer1665]

Hello, a question can you tell me the measurements of the band that the go kart uses please

[@diycreativehassya]

Thanks I also did diy in my channel you are inspiring

[@CHERALAUTO]

Good Luck

[@maypongan4131]

@@CHERALAUTO Y7 chi Y7 57 57 66 ft Y7 Y7 t[5 g57

[@ToyManFlyer1100]

Excellent build and machine !!!! :-)

[@CHERALAUTO]

Thanks

[@ToyManFlyer1100]

@@CHERALAUTO ... You're welcome...:-)

[@turbolaser24]

This is awesome!

[@CHERALAUTO]

thank you

[@mbrrideitlikeyoustoleit8436]

Great job

[@CHERALAUTO]

Thank you

[@luissalguero697]

Nice build btw

[@CHERALAUTO]

Thank you

[@philjean9403]

The engine they just cut in half is one of the best I cannot believe they did that that is one of the best two-stroke engines out there oh my God I still can't believe they did that why did you cut it it was such a good engine

[@Markko1986]

Those engines are plenty. Not that rare to be a pity to sacrifice it.

[@philjean9403]

@@Markko1986 that engine was a better engine it was two stroke and now you got it hooked up to some lawn mower engine need to mix cement two strokes will always be better

[@codyhinson3352]

Most def a 4 stroke

[@jeremyandjennifer6974]

Gy6150 is 4 stroke

[@user-eh5jr7yh2f]

Красава все доделаеш после испытания , молодец жирныи лаик

[@webhomemadeprojects1173]

I think it's not rev high rpm to full engage the clutch. But it works all that's matters. Great build.

[@CHERALAUTO]

Thank you

[@digeberaja9272]

Good idea

[@CHERALAUTO]

Thanks

[@sirichardariesacostanowher2142]

Nice idea

[@anthonyquinones1465]

I've been plotting this to install 212 predator on to Honda Spree problem Honda Spree Drive is in reverse would still have to cut up a gy6 motor to use that rear portion

[@saulromero5129]

Thsi is exactly what I want to do to my trailmaster 300 but use the chinese clutch and a 780r front clutch.

[@gilaspinoytv]

nice video

[@ericvlog]

Nice vedio 👍

[@LeandroDasilva-ui7vc]

No lugar do pião dentado coloca-se a roda será que daria certo?

[@AnwarBengkel]

I like it your video Good

[@lhawoekcreator]

Good job.

[@satyajeetmahajan3085]

Wonderful 💐💐💐💐

[@absolutemadlad2671]

you need to loosen the suspension up or it needs softer shocks

[@-Je2021]

Já deixei o like

[@josephassad9829]

What kinds of bars did you use

[@pokoemelumancing6169]

Good my friends 👍 👍 👍

[@CHERALAUTO]

thanks

[@GENERALCHAOS13]

i need the model of the engine side of the clutch to see if theres a 1inch bore for a 406cc engine

[@suzikuchannel]

Mantap 🥰🤝

[@wiesawpaleta9179]

tell me how you convert cvt to instal on crankshaft for this engine

[@CHERALAUTO]

I drilled the crankshaft and made a thread tapping in it

[@rahmatmetaldetektorpalopo]

Good 👍

[@CHERALAUTO]

thanks

[@thepirate2023]

bravo,tres bonne invention,c est possible de me dire ,c est quel embrayage pour l avant ,coté moteur ,merci

[@toff5812]

peugeot 103 mais il a enlever le système de démarrage a la poussette

[@wiwinwidyo6176]

Itu pengganti roler nya pakai apa om

[@stephanegluck6887]

Bravo

[@burungkampung2494]

mantap 👍👍👍

[@josecarlossiqueiramoura3396]

he's the one with the strength hahahaha

[@HueMongussD]

I didn't see variable, only constant. So it's a CT transmission?

[@anythingrc4715]

Continually transmission?

[@tomasedisonortiz5342]

Nice

[@mrrvuthakh9725]

Good

[@CHERALAUTO]

Thanks

[@pra7277]

Давно сделал уже передачу по такому принципу, видео на канале есть, про трактор из хлама

[@user-zd9bk2pg7m]

Супер!

[@user-pd9fb5on6y]

fc ครับ

[@pars4709]

Totally AMAZING!!!!!!! 😱😱😱😱😱😱😱😱🤗🤗🤗🤗🤗😯😯😯😯💡💡💡💡💡💡💡

[@gibigarage9104]

Nyimak om 👍👍👍

[@user-vk4xp2hg3w]

Много раз такая мысль посещала, поженить GX-160 c вариатором.

[@viciriucandreea5835]

Ok felicitari

[@luissalguero697]

I was thinking that if you do a powder coated paint on all your builds they would look professional

[@merronphillips7079]

It Tabitha

[@gokins981]

Nice job .what is the max speed ???

[@CHERALAUTO]

about 50 km/h

[@jasperdomacena6491]

has no rear suspension flex but it's cool

[@hitmn2011]

good good✔️😘✔️😀😘

[@beatrixmechanic]

This is so cool. ...

[@CHERALAUTO]

Thanks

[@robertpolicastro1]

Funny thing is that the original scooter engine has almost the same hp as that 4stroke junk you used and is capable of much more

[@yantrealmeparents842]

can this be attached to the boat

[@DeadguyAi]

Looks bouncy, maybe letting some air out of tires would help

[@CHERALAUTO]

Good idea

[@jamesdelk8926]

With volks wagon engine cool custumized

[@quantum8037]

👍👍👍

[@offload4458]

4x4 จะดีมาก

[@jamesdelk8926]

Hey you must have five channels tech channel and other channels cool

[@reylseytr3449]

Need change the shock in front

[@matusbosela8138]

Z čoho tam máte ten variátor (prevodovku)?

[@mira238]

Z 50 cm3 skůtra

[@yhadyvasquez5888]

Me gustaria ver si se puede alargar el cvt clutch de scooter para poner rines mas grandes como 15 o 17?

[@tawaing5395]

กำลังเหลือๆ ✌️✌️✌️✌️💃💃💃💃

[@joeythomas9062]

Manni wish i had the know how tondo this!!😢

[@pshemek5625]

Can u send me link where u bought this variator?

[@karaca1100]

Peugeot 103 moped variator

[@anonymously241]

What is the top speed?

[@pedrodeoliveira3036]

How much cost a compler kit ?

[@budipirang2694]

Wow

[@mhexaalghifahri39]

CVT CONTINUE VARIABEL TRANSMISI

[@core1624]

💯

[@penetratormax]

Есть ощущение, что ремень долго не продержится...

[@geyeyeyeueye367]

👍👍👍👍

[@kikiriski6017]

Not gud choosing tramission but nice idea to using old scooter

[@sbri733]

Can for make traketor

[@arthurlezzano4700]

Bos glindingane papat Piro lengkap sak pelek e

[@buttercupwalker]

1 million dollars!

[@billydonnelly7378]

Might want to lower pressure in tires......

[@bobbaser398]

jos

[@firstnamefirstnamelastname3213]

I ike this but gasoline tank near weldine spark is dangerous.

[@Stroim_sami360]

В чём проблема взять родную втулка со шлицами и на неё расточить звёздочку? Сцепление и ремень долго не проживёт при таких нагрузках...

[@alekseyevgrashin6704]

А реверс?

[@heraclidesvieira9471]

Nossa que gambiarra

[@daleyfun2247]

Did he just weld the sprocket 🤣

[@InzeksizEshimoro]

😄

[@sompong9178]

4x4

[@luissalguero697]

I just want to know why you deleted all of your other restorations videos :(