Extreme BMX Repair Using the WRONG TOOLS!‼️🤯

Watch along as we push our BMX workshop skills to the limit.. With this Extreme BMX rear wheel revival inside the skatepark! 🚀🔥 Without the correct equipment, we’ve used our imagination & BMX restoration mastery to turn this worn out wheel into a special custom front wheel! 🤩♻️
.
Follow us 👉 @t77bmx 👈 RIGHT NOW!‼️ So you don’t miss our next Extreme BMX rescue mission!

[@Malleluxusgirllarissa]

Ah you made a front wheel from a rear wheel! Great idea

[@oakzy3647]

He’s tuning it

[@user-gy1ej9tq7h]

可以翻译吗

[@cora777x]

😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

[@marcelodonascimento920]

❤❤❤❤❤❤

[@almudhorry2029]

​@@user-gy1ej9tq7hah kau membuat roda belakang menjadi roda depan.

[@Perryprime1999]

Chilling under the ramp at a skatepark while its raining is a vibe

[@chriscarr1787]

Or not well😢😢😢😢😢😢😢😢

[@Christopher-ko9op]

Yeah it is. The rain, the wind, the cold but you're in a little pocket of shelter. The feel of the cold steel, the sound. I can imagine it.

[@reeNeey_]

@@Christopher-ko9opperfectly described. While reading this, I was sent back to the very old skating days ❤️

[@goodhouse91021]

And probably sitting in piss 😅😅

[@Christopher-ko9op]

@@goodhouse91021 lol don't ruin it!

[@Yut00bisSUS]

Bro reinvented the wheel.

[@bradleyhorn4249]

Underrated comment

[@patrickmcgillicuddy9227]

Damn I thought the same kudos

[@CruisinCaprice]

Retuned the wheel more like it

[@user-hc9sk3mg1h]

A shit vibe 😂

[@Headtoppaman1989]

Not really... wheel builds are a pretty common thing...

[@paulmartinez7794]

I was feeling like I was dumb, but then I saw this short and it made me feel better.

[@David27mk]

very good 😂

[@ninjamigs1766]

😅

[@mirza6399]

why ??

[@taylortorres3769]

@@mirza6399 because he turned a back wheel into a front wheel

[@jeffkrantz9916]

😁💯👍😆

[@iDontCheckNotificationsReplies]

“Mum that strange man’s under the ramps again”

[@T77BMX]

Hahaha 🤣

[@eliteculture1519]

Keeps the park cleared though 😂😂

[@aileendimakiling3834]

Yeah that alignment was accurate as hell😂

[@chris22186]

The patience you have to have to to true a wheel is insane.

[@user-zr4un6tk8b]

Yes I am a dirt bike rider and grew up working on them. One job I will never ever do again is respoking a rim. Fk that I just buy new rims when I need them

[@immabadelmo4969]

Used to work in a small town hardware store shop that did a little bit of everything, this was one of, if not my least favorite things we'd fix lmao. Soooo time consuming

[@richardlea818]

We used to just use the brake pads to gauge them. I think it took me around 3 hours to lace and tru a wheel

[@CapUnlimited]

I was thinking the same thing

[@bmxrider71]

I actually love building wheels. Best I've done is on my Hyper and i built both in about an hour and a half start to finish.

[@tee6519]

I can't lace a.rim in my house let alone ina park in the rain with wrong tools😂

[@user-jr1ki4ee7q]

I was gonna say very, very good, although I’m just gonna keep it positive very good very good content very good content you Musta had a good father or a good guardian to show you some stuff about mechanical

[@conorharford5117]

Me too. i have one sitting in my front room for months

[@Eddi3xBac0n]

trial and error. practice makes perfect

[@user-dd2yz3yu2q]

This and 10 speeds is the worst of bike building

[@tonberdy9806]

@@conorharford5117pppp😊ppp😊pp😊pppppppppppppppppppppp😊ppppppp😊p😊😊pppppppppppppp

[@ivashkevich]

Гений. Ломал заднее, устанавливает переднее.

[@T77BMX]

Yes! We needed a front wheel and this rear Rim was in perfectly good condition, so we recycled it! ♻️

[@alphaomegazulu8451]

Only a real rider can do this. Back in the day we’d take our bikes apart every morning and tune everything up. Awesome 🤘

[@fotis3v480]

Yeh you tune your sit heights.😂 It's a bmx about the only things changing is seat height and tire pressure.

[@69TheSuperbad]

​@@fotis3v480 get fuckin' rekt. You just got boomersplained to. Love you both, much love and respect. Hopefully you both can resolve your differences respectfully.

[@taylortorres3769]

He literally turned a back wheel into a front wheel. He’s got 2 front wheels now

[@Pushbikesteve]

This the kinda sheet I been doing my whole life man 😂😂😂 I appreciate this video 😂🤙

[@Jeff-dq3bj]

When u feel dumb, just remember this guy exists

[@CXVI2]

try doing this urself bucko

[@Text-SpeechStories]

Look at the caption first

[@yikes6969]

Useless comment

[@Hiz_FF]

Yeah when I feel dumb I'll just remember you.

[@LoneWolfHustle]

😂😂😂😂

[@pashasabelnikov7161]

Наши руки не для скуки, Работа, ради работы. Продолжаем в том же духе.

[@T77BMX]

We made a NEW front wheel for someone to ride down the skatepark! Glad you enjoyed the content

[@bawz1773]

qeq

[@gangnygny4535]

ему бы в армию бордюры красить

[@elparpo9]

Video ended when he found out how difficult is to true spokes by eye

[@T77BMX]

Hahaa! 😅 Yes we actually finished it off inside the workshop using the tool. But this method is possible… just very hard like you said!

[@elparpo9]

​@@T77BMX good video!, i even adjusted mu wheels some time ago, lateral truing is easy but having a round wheel isnt! haha cheers keep on the good work

[@bmxscape]

@@T77BMX if you start by threading every nipple just to the point where every t hread is covered, known as "zeroing spoke nipples", every spoke will be evenly threaded and you can then just add 2 turns per spoke at a time going around the wheel until its tight. if it was a good rim to begin with and proper length spokes you will get a true wheel

[@Dirtdaredevil]

chops back wheel. but back wheel is there when he is under the thing, then puts in a new front wheel?

[@jopequi]

Creo q es para poder centrar la rueda, puede utilizar el trinche como guía

[@Ferrari255GTO]

@@jopequi weon lo que dice es que despues de cortar la llanta trasera, monta una delantera pero al montar la delantera hay una trasera montada

[@elite_riddimzgaming3427]

​@Ferrari255GTO cutting rear spokes, a wheel is complete.....made up of a tyre (the rubber bit) a rim (the metal bit the tyre sits on) spokes and a hub (the centre piece in question). Can confirm he never cut a tyre. Yes he did mount a rim that was on a rear hub to a front hub, probably bought a new rear complete then used the old one as its a sqaured edge rim....most g sport or skylark front rim's have a rounded edge....he wanted matching wheels not one rounded one squared in a set

[@Ferrari255GTO]

@@elite_riddimzgaming3427 yes, i know what both spokes and spoke nipples are, i was generalizing. Also llanta is Rim, not tyre, tyre would be Neumatico o Cubierta

[@benjammin893]

yep. you're exactly right. it's a total setup oopsie video

[@pablodiablo9178]

Just happened to have the right length spokes with him but not the right tools 😂

[@shanewinslow7285]

😂😂

[@kmfrnz]

pro in truing dangg!

[@private-nobody6667]

Brought me back in the days when I used to work in a bike shop and one of our specialties was creating wheels from scratch, not an easy job. 😊

[@user-eu6cd9pt2z]

No one can truly claim to be a Zen Master, until they've laced a wheel from scratch.

[@samuelbonaccorso9969]

You a real one my guy.

[@T77BMX]

Thank you my brooo!! thats too kind 👊👊

[@Indicasativa55]

Yeah I’m just gona pop down the bike shop and buy a new wheel

[@FrustratedBaboon]

Chicken

[@Indicasativa55]

@@FrustratedBaboon definitely mate but tbf I know if I did it my bike would never work agin

[@Tim_On_Line]

В этом теряется весь вайб DIY.....

[@Indicasativa55]

@@Tim_On_Line 🤷

[@elite_riddimzgaming3427]

Anyone who actually rides knows most g sport and skylark rims that are front mounted have curved walls not squared ( for brake purposes on a rear only brake set up) so he obviously wanted a complete matching wheel set not a curved and sqaured so hes put a squared rim on a front hub so both front and rear wheels match

[@shanewinslow7285]

Now i understand lol ty. My ocd would probably have me do the same... but minus doing it myself 😂

[@wf8045]

Thank you for explaining. I was confused

[@Kickman81]

I love lacing and truing- I use to sit at my coffee table and build a set every night after work for local shop. They would pay me 50 dollars a set to build them. My garage had pallets with hubs, rims and spokes.. it was a fun side gig.. i miss that in my life

[@Khercules]

Bro made it look way too easy

[@CrypticArtsStudios]

It's called editing....

[@arvidlikestoast3618]

My guy snapping those tire rods like it's nothing

[@BigRigTrucker22]

I really spoked to see the end result, amazing 👏

[@T77BMX]

Thanks brooo!! 🤣👊

[@gaspertolar7950]

wheel building kinda goes hard ngl

[@user-ji1xc2fu5k]

I'm stuck at step 1. Now doing it to other bikes to gain enough experience for the other steps

[@T77BMX]

Ohhh nice!! Haha just the sitting spokes? 🤣🫡👊👊

[@davidsonnguyen38]

i honestly never knew you could do this. thanks for the education.

[@mathewdecorse5748]

Not a lot of people know how hard it is to respoke a wheel. Color me impressed😅 I threw out so many lightweight GT rims in my day because I had no idea how to do anything with them at all😅

[@T77BMX]

Hahha niice!! yeah the old school rims were super weak they must have broken every weekend!! Glad you enjoyed the content, thanks for the comment!👊

[@mathewdecorse5748]

@@T77BMX I had a set of 1987 gt gold rims (idk specifically) but as a 13 yr old I could lift the while GT with a pinky easy, most of it got stolen. Chopped right out of highschool but that ol GT took everything I gave it. Went thru dirt vert canal and street ramps. Ol girl took anything I could give it(unlike my hs gf 😆). Now I think about jumping on a bike I gotta let the ER know before I set out 🤣

[@jacielopox3692]

FTP G*59

[@yeryehaua9165]

G59 till the grave

[@alexzandergolden8765]

Bro I need a new rear rim u got any old ones u can ship

[@elelly1845]

They're identic There aren't front or rear rim

[@Ferrari255GTO]

@@elelly1845 i think he's asking for a full rim not just the ring of the rim, otherwise there'd be no need to specify

[@bmxscape]

@@Ferrari255GTO point is there is no rear rim, however there are rear hubs and rear wheels. proper terminology is important when dealing with wheels. tire rim spokes hub all together make a wheel.

[@aurteekay6339]

“Bro I just pulled up to the park where you at I don’t see you anywhere” Him : “oh I’m just under the ramp, doing weird stuff”

[@chronicmachines6717]

No way you did it at the skate park, thats hard core bro 😂😅😊

[@T77BMX]

Hahaha my guyyy!! thanks brooo much appreciated 👊👊👊

[@miltonarroyo7784]

My man's went on Straight tweaker status

[@T77BMX]

HAhahaha 🤣

[@alternativeharvey7]

"Hey see that wheel?" "Yah!" I gonna destroy it and put on a similar one..ya know, like a smart people does!"

[@T77BMX]

YES! Exacltly. Because the rear wheel was Broken so we used our brain to create new Wheel out of the Rim that was still working!

[@Watergiant95]

The unemployed friend on a Tuesday afternoon

[@T77BMX]

HAhaha. Not quite... But thanks for the comment! 🤣

[@Watergiant95]

@@T77BMX entirely satire, turned out great and you did something I never knew before.

[@irishlion5271]

Bro demolished his old wheel to construct a new wheel

[@T77BMX]

haha yep!! the spokes were too rusty they all broke really easy. And the old hub needs a full internal service. But the rim was in perfect condition! thanks bro 👊

[@user-ns9bw6vs6m]

This deserves way more views.

[@T77BMX]

Thank you so much bro thats awesome!!! 👊👊👊

[@checuevas93]

You know what they say, one man’s skating ramp is another man’s garage. 😅

[@user-qg6in6xl8p]

i remember the days piecing together bmx bikes out of spare parts from others and most the time only using wrong tools working with bare minimum

[@T77BMX]

Haha yess!! thats what BMX is all about!!👊👊👊

[@wickkjohnn007]

His patience is unmatched

[@Bigrig_trmc]

The patients of Kobe to do that all at the park lol I would have forgotten some tool that I need to complete it I’m sure😂

[@T77BMX]

Hahaha! That’s so true bro I was really stressin that I would forget something 🤣🤣👊👊👊

[@kevinthomas5939]

He is a genius. He took the back Will off and put it on the front of the bike wow.

[@T77BMX]

Thanks broo!! yes the Spokes were too rusty and the Hub needs full internal service. We re-used the rim because its in good condition! thanks bro 👊

[@MtnBadger]

Now *THAT'S* "BeSpoke!" 😊

[@T77BMX]

Waheyyy!! thats an aweosme comment bro! thanks so much 👊👊👊

[@dabikerboy]

Putting all the spokes in on the same side of the hub is crazy

[@lockdown2315]

This is an influencer that can actually teach you something

[@T77BMX]

Thanks a lot Bro! 👊👊

[@Lawyerable]

he attacked that wheel like it owed him money

[@T77BMX]

🤣🤣🤣

[@shanewinslow7285]

😂

[@joeaznorth]

Yup. That's how it's done! Watch and learn!

[@T77BMX]

You the man!! 🙌🫡

[@joeaznorth]

@@T77BMX check out the komatsu pc01 for building jumps. I want 1 so bad

[@SmokingDragon69]

That spoke tune better be 💯😂

[@vtrpaddy3408]

Ahh my youth spend on the half, hip and spine at Woking. Thanks for the trip down memory lane 😂

[@Chrissyeveex3]

The people on this thread that don’t understand the skillllll it takes to true wheels with the right tools let alone none. This is impressive!

[@fletch989]

Now i want to hear a mash up of a track with the sound affects of this video

[@T77BMX]

Hahaha no Way! that would be hella sick!!! 👊

[@Sd_Oliveira01]

switched from water, to H20😂

[@juliangonzalez9631]

Not gonna lie, you had me in the first half😅

[@websitelaunchcourse4061]

This was my childhood. We would have repair days before summer hit. Then I bought mag wheels. To hell with those spokes

[@T77BMX]

HAHAHA no way!! and the Mag wheels lasted? I have heard many stories about Mag wheels breaking!! 👊👊

[@dominicklobifaro5215]

Crazy mechanic skills he’s done that 50xs at least it’s not easy at all

[@T77BMX]

Thank you so much bro!! yes re spoking can be sooo hard sometimes! thanks for the comment broo 👊👊

[@onelovejl8098]

Reminds me of my childhood 💯💯💯💯 love it 😊

[@T77BMX]

Wiiicked! Thanks for the comment dude we are glad you enjoyed it!

[@ericsalidbar1693]

My entire question from the beginning was how were you going to get it true i guess i wasn’t disappointed but definitely not satisfied lol 😂

[@eviltricster8090]

I had no idea spokes on a bike rim could be replaced or adjusted. Cool

[@tannerschuettke9870]

I spoke my front wheel back in the day and it took me about 4 hours to get true but it was still a little wobbly, did the job tho lol

[@sordonic9195]

The unemployed friend on a Wednesday afternoon lol

[@q9260]

And then you forgot a Torx Screwdriver 😜

[@T77BMX]

Hahah yes that would be even better brooo!!! 👊

[@REAP.0831]

This takes me back to when I use to ride..

[@T77BMX]

YES!! thats awesome bro thanks for the comment!! 👊👊

[@Highflyer5347]

I just finished building a set of wheels for the first time…. This is unbelievably impressive

[@Tjxdarkstarz]

This blew my mind, hella cool😅

[@luizfreitas1315]

You know that you could painted it the way it were without needing to cut the strings😅😅😅

[@T77BMX]

Thanks for the comment bro! Unfortunely the old spokes were rusty they didnt spin on the nipples and they were breaking super easy!

[@luizfreitas1315]

@@T77BMX thanks for elucidating that my friend

[@ndspecial]

Looked like the right tools. Made easy work of it anyway.

[@T77BMX]

Thank you so much bro!! Yes we almost had all the correct tools, It was just the Truing stand at the end to make the rim straight... 👊

[@jamesonpenguin]

Never been good at trueing, plus I lost my nipple twister.😂

[@mirrawashington6637]

I subscribed so fast I love a man good with his head and hard working with his hands ❤

[@Lord_Dazzla]

Wheel building and fixing buckles is very therapeutic

[@Ryuko69]

Dominican Republic kids all day everyday i swear this is their specialty😂 Im Dominican myself.

[@omarraymundo7475]

Man this dude works fast !!! 🤔

[@T77BMX]

Thank you broo!! 👊👊👊

[@GhostOfficial-0187]

Bro ain’t no way you finished that shii by eye.😂💯

[@Kawboi386]

Who did your wheels bro?? The guy under the bleachers by the high school on 3rd street 😂

[@ibeatyoutubecircumventingy6344]

Irony being when the wheel wasnt even straight

[@T77BMX]

hahaha its ok it is now! 👊👊

[@larkinkelly3754]

Always detention, never cut spokes it can damage the hub flanges and the rim

[@T77BMX]

YES! Very smart broooo. We did loosen these spokes first so tension was not too strong for when we cut the spokes!! thanks bro 👊👊👊

[@capomontoyab2160]

I remember doing this at around 13... I put it together all wrong and the spokes were all different lengths. Took me about a month of messing with the setup to get it right.. only to find that id being doing it right the whole time the tension changes as you put more spokes in...well it did back then anyway 😂 20 years ago 😬

[@kaseyanderson129]

Trued that wheel like a champ

[@T77BMX]

Thanks brooo! 👊👊

[@cardcarryingantifamember6280]

I shudder to imagine how you balanced the spoke tension on that wheel without tools

[@bigdaddymurch4041]

Trueing a wheel isn’t that hard if you know what you’re doing😂(coming from a bike/grill/patio set,etc assembler) lol

[@dreamcalculator]

Great vid tho I subscribed the moment you started painting

[@miahzzeebest701]

A bike shop would’ve charged me $700 to do that.

[@shanewinslow7285]

God damn 😮

[@MrHardRock.]

Snapping sounded like perry the platypus theme😂

[@T77BMX]

Hahaha someone else said that too!! hahahaha bringgs back some memories 👊👊👊

[@groidcel]

Show this to Ed Templeton whenever he says setting up a skateboard is hard.

[@T77BMX]

HAHAHA Great comment! but i wont comment on how hard it is to ride a skateboard ! haha

[@samsparrow823]

As a teenager with a spoke key, I had this power to fix or ruin wheels. I was a twat

[@T77BMX]

Hahaha!!! niice. Yes very valuable skill to have down the skatepark!! 👊👊

[@tDADDY09]

This is what your uncle who has 4 DUIs does during the day.

[@T77BMX]

You Uncle.. Not mine 👊 haha

[@onlytank3937]

He turned wheel to wheel. Amazing

[@alphaomegazulu8451]

F u, want a piece of me? Us riders stick together just like the local drug dealers yall became and now we war.

[@dreamcalculator]

Sounds like everyone be living next to Leaf blowers these days lol

[@EstherAdela-yc1bj]

Your humor is top-notch.

[@JIBBING_1980S]

*Arrived at the skatepark 8.00a.m *wheel build finish 3.00pm

[@patrickmcgillicuddy9227]

Bro just reinvented the wheel

[@T77BMX]

HAhaha thanks broo!! 👊👊👊

[@pablitogavia562]

Beautifully done sir

[@TheKrazyinjun]

Sheeott, I thought you was going to make a basketball hoop.

[@T77BMX]

Hahaha!! niiice man, thanks for the comment👊👊

[@TheKrazyinjun]

@@T77BMX 👊👊

[@bunktwr]

Don't do it at home unless you know how to place the spokes 😅 it can be really tricky if its your first times.

[@szczurrat2402]

I usually do that stuff at home. Hardcore.

[@SeanCuttaBabineaux]

Extreme wheel repair 💪🏾💪🏾

[@darthpalagus3820]

You're on the level if you're repairing stuff with the wrong tools.

[@onelovejl8098]

Lol an so what the job was done perfectly

[@darthpalagus3820]

@@onelovejl8098 That was my point

[@johnrestrepo6388]

My dad taught me this 20 years ago... i thought the art was lost 😅

[@T77BMX]

Thats awesome!!! thats very kind of your dad to teach you bro!! its not easy and a very cool skill to have 👊👊👊

[@mjunior3511]

Bro at that point ur time cost more than just getting a new wheel all together

[@T77BMX]

Yes! But that would be a waste what about the perfectly good rim? And if I bought a new wheel who’s going to tighten the spokes when they come loose?

[@JZ-tg1cm]

Painted the break surfaces, but otherwise a good build. Chill vibe

[@joshsalsman2806]

I dont see brakes on his bike so thats probably a used rim from a buddy. 🤷

[@T77BMX]

Yes we did and the rim already had a bit of rim brake rub