This Chevy Square Body Has Withstood The Test Of Time: HERE'S WHY!

#fabrats #chevy #squarebodychevy
This Old Chevy Squarebody wood truck has been with us since the very beginning and is one of Paul's favorites in the Fab Rats fleet! Check it out!
Make sure to follow along with us as we build and fabricate cool stuff!!
We LOVE Onx Off-Road! Get 20% by using code FABRATS20 or click on this link:
webmap.onxmaps.com/purchase/o...
Get your own Fab Rat's Apparel Here:
www.thefabrats.com/
More videos you'll love:
Looks like the Old Chevy Wood Truck might need some ASSISTANCE!
• Looks like the Old Che...
This Happened In The Worst Place Imaginable!
• This Happened In The W...
The Build You've All Been Waiting For!
• The Build You've All B...
Will Vice Grip Garage’s 1952 Packard RUN AND DRIVE 2,000 miles back home?
• Will Vice Grip Garage’...
I Can't Believe This! Barn Find Of The Century!
• I Can't Believe This! ...
We love Barnes 4x4. Check them out!
www.barnes4wd.com/?ApplyPromo...
Check out Fab Rat's Recovery Gear by Yankum Ropes!!
yankum.com/products/fab-rats-...
Use coupon code FABRATS at checkout to save 10% on your order!
Follow us on Instagram: FabRats
And THE FAB RATS Facebook page: / thefabrats
For business inquiries please email us at: [e-mail]
Shipping Address:
Fab Rats
P.O. Box 234 or General Delivery
Glendale, UT 84729

[@chrisjones7869]

My 79 went from a 1/2 ton 6 lug, auto, small block, to a 3/4 ton, 8 lug, 4 spd, big block. Keep em alive brothers😊

[@timdunmyer4549]

I cant help but notice lately that Hunter is doing alot more work then just holding a camera. He's learning something. There's hope yet...lol

[@larryfreeman7979]

was thinking of commenting on the same thing, Good on ya Hunter.

[@johnwohlheter601]

Man I miss the days when you could buy a $500 truck and drive it to the ends of the earth and back...Ahhh the good old days...

[@grimsoul0]

My very first car was a 73 T-Bird that I paid $500 for. I drove it for about 5 years before getting rid of it.

[@tomsisk6811]

Our age is showing ...😂

[@Gossamer314]

I paid $400 for my first car a 68 Dodge Charger and drove it home.

[@steelmill]

Everyone needs a Squarebody, These new trucks will never make it 40 yrs.Shawn and Hunter make a great team.

[@ellwoodwolf]

Yeah If you have the means to make sure the front of the frame doesn’t break off hahahahahaha

[@Chris_at_Home]

I have an old 84 3/4 ton that I bought with a snowplow for $3 grand 10 years ago. The engine runs great but I had to replace the front inner axle from abuse. I guess I need to check the universal joints more often. I’ve had 2 Blazers and 5 pickups from that era. They are easy to work on. I even bought the Helms manuals and did the automatic rebuilds.

[@shroom903]

Your not a chevy guy if you haven't replaced a transmission or 2

[@Chris_at_Home]

@@shroom903 Here in Alaska bad automatics are common from people taking off when it’s below zero without warming up things. I traveled around the state some for work and even taught some people in these remote places how to rebuild them in the evening s after work.

[@RodolfoLozano-pk1er]

I bought one back in 2011 it’s on my pic, it’s a 86 M1008 it’s a military version of the 1 ton, military ones are ton 1/4 also known as 5/4tons she’s mint only has 32K on motor & it’s a 6.2 diesel with turbo 400 tranny, 456 gears & a Detroit locker in the rear with 6” lift & 37” tires… we all need one….

[@LTNYG]

Good morning everybody! Happy freaking Wednesday!!!!😂

[@AdventuringwiththeS.G.O.C.C]

I for one am pleased to see Shawns confidence become commensurate with his skills. He is a boss !

[@ellwoodwolf]

Yeah combined with the episode where they went to his previous job - did I miss them saying what he used to do ? Was it city maintenance?

[@larrycopenhaver]

@@ellwoodwolf missed that

[@davidjohnson1816]

He worked for the state.

[@spiderwebb4983]

Yep got to agree with that. He has more skill and knowledge than he lets on.

[@CurtisDrew1]

I miss my old square body! It was a straight six with a rusted out bed when I got it. Ended up with a 40 overbore 350 4 bolt main with 2.02 heads and 3/4 race cam & rollers! A 4 speed out of a 66 GTO to make use of the HP! Hurst floor shift too! Still have the tranny, shifter bellhousing and clutch assembly somewhere in my shop. I rebuilt the bed on my lunch breaks at work by mounting the bed on the truck frame upside down. My coworkers used to laugh at me. I flipped the licenses plate upside down so it was now right-side up in the back, and swapped the wiring so turnsignals and taillights worked the right direction. It took me 6 months to get the beds floor rebuilt 30 minutes a day!

[@henryg683]

Paul looking at the video when Michelle got into the wood truck she had a big smile on her face I think she was remembering the younger days when you two daily drove that truck and from what I saw she remembered some good times because it was a big smile she had on her face!!!! Merry Christmas to you and the entire family and crew at fab rats !!!! Hope to see more content before next year!!!

[@chrisjohnson5888]

she is thinking about how the truck used to bounce even when they did have the shocks. the shocks were real good by then butts it's still bounced a lot😂😂😂

[@chrisjones7869]

I have a 79. Had it since 92. Been through a couple transformation s. Love it. Ageless. Keep up the great vids man. God bless.

[@knightandfog]

My dad bought a 79 Sierra back in late 78. I drove it until I went to college in 85. Loved that truck. Wish I had one now.

[@adamthomas4638]

I have a 75 shorty but its lowered on air you'd right these trucks are ageless you would think a truck that is so square wouldn't look good but a square body just has a mean look to it

[@chasehaney95]

The wood truck is my favorite! I love the chop it has in the idle.

[@imagseer]

Love seeing that old truck being remodeled from the boneyard where possible. The video production seems even better this time with clips that show more of the character of the people involved.

[@user-xe2fh4tt2b]

Good job on the filming Hunter. Not just a tractor operator after all!😀

[@spbezuidenhout412]

Hunter I'm glad to see that your doing more and more in the shop and not just being a camera man 😂

[@sumosteve665]

The Shawn and Hunter show was great. They work very well together.

[@Shilohii65]

You gotta love a girl who just nonchalantly comments, “worked good enough,” after she’s been your girl for a few couple years, and the mother of your four children. She’s a keeper!!!

[@xxBlazinBobxx]

Wood truck wrenching during the day and lobster dinner at night! Life is good for the Cox family! Awesome fans to send such a fancy meal!

[@ggalland1]

Very nice. I can tell how much sentimental value the ole wood truck has for you Paul. Thank you for taking us along and sharing

[@bp4887]

I love watching you guys repurpose old parts and your "supply" yard for those parts!!!!

[@xvsj5833]

Merry Christmas 🎄Paul & Michelle, Grandma Lolly, Hunter and the FabRats A Team family 💛 love your content and channel ✌🏻🫶🏻

[@detroitdiy]

The old square body's are the best. I had a 1981 and it broke my heart to sell it. Good to see that one getting some love.

[@atf01234]

The white truck is one of my favorites on the fab rats fleet, glad to see a video on it.

[@j1m3by]

Well now... that was some good explaining... I've had those pumps apart a bunch of times and never knew anything about adjusting pressure.

[@donwilliams3626]

Is the "Ole' Wood Truck" the only vehicle Paul drives without a cracked windshield? This was a fine job lovingly putting everything back using experienced parts. And a few parts "off the shelf"!

[@charlesowens9784]

Thanks again for your time making the video watching from Reno NV

[@user-tg4dk4ze4j]

Wish I was a car mechanic, you and your fellow mechanic do such an awesome job, love watching you guys work,👍👏👏👏👏❤

[@Andy_C_aka_Cliff_McCrawl]

Heck yeah! Great to see you and your girl out for a ride in the ol’ truck 👊

[@CycloneTS1]

I was expecting a video wrapping up the LS swap on the wrecker. This was enjoyable to watch, and I learned more yet again. Great to see these trucks and parts repurposed and kept running.

[@scottnelson1713]

I don't know why, but I enjoy watching you guys work (as I sit here lazily in front of my computer). It was informative watching you swap out the full suspension. And I learned a new trick - putting pliers in a vice to hold small stuff.

[@jamesfoley9097]

I'm not sure about the sissy prybar with the PADDED HANDLE at 4:30, but the ziptie holding the windshield wiper together at 31:50 is Pure Fabrats !! And, Gotta love a gal that likes your pickup truck! Oh, and where can I get me a Green Hammering Device ?!?!? Paul (and Sean's) favorite tool!

[@Westerntraveler]

Grandpa Sherms tow truck and the Wood Truck. Great combination. Should make a beast out of it

[@keith2059]

Greetings Fab Rats, your families, friends, fans! Always great to see your projects! Hope everyone is well, take care, be safe, and have a wonderful Holidays!

[@troybilt6752]

I would like to tell you guys thanks for the clean non propaganda entertainment. I don't even turn on the boob tube any more. Merry Christmas and think you for your time.

[@tombostian8255]

That old truck is definitely one for a man to be proud of! It will be sweeter than ever now!

[@iOakTree]

The visit and test drive with Michelle was the perfect ending to the video of you working late on your old truck. Good stuff 👍

[@allenmorris2661]

I love the old chevrolets! 👍🏻

[@89G]

Noooiiiice!! The wood truck gets another life. Do my OCD a favor and move the door moldings to match the height on the rest of the truck 🤣🤣🤣

[@MikeBaxterABC]

31:40 When my wife and I started dating, she wa 16, and I had a 1975 Chev Sq Body, 1/2 ton with a 250 in line 6 (the one with the intake manifold cast in one piece with the head! :) , and three on the tree ... (AND it was only 4 years old! :) We drove that truck for decades! :) when i scrapped it It was a full one ton, with the Hydro Boost Power Brakes, a 350 4 barrel, 4 speed Muncie with bull low, 14 bolt rear end, and a 12 foot flatbed. the only original part of the truck left was, most of the cab, the radio, and the serial number :)

[@ellwoodwolf]

Paul is hilarious, his love of square bodies.... oh never mind the whole front part of the frame that breaks off.....

[@kimetherington2252]

Good video this week, as always! Up grades on the square body wood truck, finish it with new breaks, the truck needs them, and will keep you safe! I hope Jase's ankle is okay. Shawn and Hunter work well together when alone! Til next time, see you then. 😊

[@callenH01]

I love how the cat is just chillin. Not affected by any noises in the shop

[@roygotham]

It’s amazing how you can upgrade your rig with parts that have been broken in already 🤣 which is always a good feeling!! Thanks for sharing the process.

[@The_real_Matheny]

I love how you just have random parts all over the place New and used that you can immediately use on anything. I’m Slightly jealous.

[@johnguilfoyle3073]

After watching MORR, Trail Mater, Mischiefmaker, and others, I must say that Paul's Axle Table is Uniquely impressive. It is bespoke and ideal for its purpose while still being versatile enough to tackle lots of other jobs. That table and the crane make his shop incredible.

[@sokoloft3]

that old picture of the truck with the roof spotlight is really cool. Love that spotlight

[@rolandtb3]

Nostalgia, a piece of history rejuvenated. Almost ready to haul wood. Amazing the amount of space in the engine bay! How is Jase's ankle? How long is he out for?

[@colleensorensen5243]

It didn’t keep him down long. I don’t think he even missed a practice! Love watching him play!!

[@larrydavidson3402]

The good ol' square bodies. Glad you gave some love Paul.

[@ectolle54]

First truck was a 74 K10 I did all those tricks to 20+ years ago. I now have a few square bodies, a 69, 61 and an 04 Chevy truck. Those old trucks are the best and will never not be cool. They are timeless

[@rightwingmanscott]

So loved doing the live lobsters for Christmas Eve! What a great gift. Merry Christmas all!

[@harrytaylor6854]

Nothing like a good old square body you guy's did a great job with the upgrades to it well done guy's thank you for sharing.I have a 46 year old 42 and 28 year old squares

[@morgansword]

No hydroboost braking system as I see a regular power brake vacuum tank/body there and no hydraulic line from the pump to it either... I would chance to say when all parts are rounded up, it will go on the rig. Nice work Paul and crew

[@beldenjaypaige6417]

You know when you’re talking to the camera 🎥 It’s like I’m in the shop with you guys Like I’m really there talking with you-all Answering, laughing along with you Even when you make a mistake Like putting the rear differential cover on backwards Before you said anything, I’m talking to my TV “Paul you got it backwards” My wife tells me, honey you know you’re talking to your TV right an that they can’t hear you Right then you said “ah, I got it on backwards” an you started to laugh My wife started to laugh, I started to laugh, we all laughed together, like we all were in the shop together Thanks Paul for the entertainment, the laughter, the work, the hard and fun times in all your Videos From Hawaii Love 💕 and 🌺Aloha🌺 😎🤙🏽

[@spookydonkey2195]

Chubby shop kitty warms my heart.

[@MrBillsfishin]

Some huge upgrades. I would love to convert my K20 to a Dana60 in the front and I really like that square pipe you installed in the front to reinforce the frame. Very nice.

[@steveleverett2644]

Thank y’all for another amazing video❤

[@thomasl4759]

Great video guys.... Keep up the great work we appreciate all the hard work you and the crew do....

[@LawlessOffroadAdventures]

They need some TOC. Someone's gotta save these old truck! Can see the pride when he talks about it, an the memories, regrets from treating her so good over the years. Awesome core memories 🙌 Now bout that winch??

[@wycliffeb]

Paul "I like It" . Just so many good sayings and catch phrases

[@scottbenjamine4890]

it was awesome to see you two take a ride in your old daily driver! i think you were both having some fond memories, even though they werent said out loud. time goes by so fast doesnt it?,,,,,,,,,,,,,,,,

[@trail-wolf4x4]

Happy to see a video on my personal favorite of the Ratty Fleet

[@erichall9438]

Good to see the wood truck getting some love!

[@breckjones5987]

The wood truck has had a long life of hard work and some abuse. Glad to see the old girl get some love. Hope Jaces ankle is okay.

[@rhondasweeney7271]

🙂 Thanks for sharing! MERRY CHRISTMAS TO ALL AT FAB RATS!

[@garychaiken808]

Great job guys. Thank you 😊

[@DJ63phx]

I have tried to watch this episode 3 times each time I feel asleep. This, this is my fourth time. I'm gonna watch It. Cause I just woke up Being a truck driver is hard

[@wesgraham9588]

In 1976 I got to order my Truck For the factory and it was so nice Had it for 9 years wish I still had it Thx you guys are the best 👍😘

[@paulcooper9135]

Good to see the old truck kept alive! Thanks for sharing 🇨🇦

[@Helge198]

I love that u give ur ol truck new parts.

[@MarkoMygun]

Man that's a nice wood truck ,would love to have it. Thanks for the video guy's.

[@hezekiah5537]

Hunter it's nice to see u putting in work. Get it!

[@papatomsthoughts]

Great old truck. Awesome date time, gotta get em when possible. Merry Christmas and Happy New Year to you all.

[@cwp1alpha]

Excellent video yet again. Loved the mods on the wood truck square body. The front-end mod fabrication was good improvements for this truck, which I'll definitely follow your input to future old trucks myself on that zone. And your shop crew is top notch, even when they stepped in while you went to the ballgame. I do indeed aspire to have such a great crew of few working with me some day as well. Again, excellent work on this project truck! 👍

[@scuzzjumper]

Jayce (sp?) is SAVAGE on the court! 🏀🏀🏀

[@SteveLaVoy]

Enjoy listening to Sean, the questions he asks, the remarks he makes to Hunter etc. Knows his stuff for sure!!!

[@stevehaken]

I love the wood truck. Classic.

[@mikebuzz5784]

I love the zip tie holding on the windshield wiper. That's awesome!!!

[@wswsart]

thanks hunter for the video .. Paul looks great in your channel

[@dannycrayton725]

Pretty refreshing to see a old school small block in there,thank you

[@douglasmckee754]

Sweet ole square body Paul I miss mine. Purdy good video

[@elijahwerner6130]

Always love the "let's make it work with what we got" projects!

[@reubprue8602]

I also had a 79 chevy square body 350. For $500, it brought me a lot of fun and memories until I spun a bering. It knocked 35 miles home. I sold it for $600, even with the spun bering, made a hundred and great memories!

[@SpottedMau]

"Were you feelin' bad for me?" "No, not at all" 🤣

[@stephenpoe2037]

Love Square Bodies ! Traded mine away many Moons ago ! Thanks for Sharing !

[@jamesbigham9036]

Good morning Paul I like the wood truck definitely an important truck in your fleet

[@willhikearizona]

Paul: "I should tell you that these are all used parts out of other things." As if he needed to tell us that 🤣 Anyone who watches this channel knows Paul is the King of Reuse.

[@user-tc8ml4fz1q]

Ive had my square body burb for about 13 years i love it

[@charleslawrence7194]

Had a square body GMC back in the day. Wish I had it now. Merry Christmas Fab Rats.

[@dwal2165]

Thanks for making

[@johnhart125]

Good job Guys, love recycling lsrts,built few just like that, junkyard gems

[@bp4887]

That winch would be awesome on my trailer and I should be up there next week!!!!

[@jeffmentzer9186]

I tell you what, I could use a winch for my daily driver!! As always thank you for bringing us along on your adventures!!!

[@markbrown3256]

I had a 79 pickup just like that very much and that was my favorite truck I really wish I still had that thing I had a lot of good memories in that too and I just love watching this everything you guys do thank you very much

[@robertwioch3691]

I love you all,, But I enjoy watching you guys work. it is nice to see how you fix every thing.. I gave you a thump up from Robert from Texas

[@Dirtbiker4life]

Love these old trucks, I need to find me a d60 to get rid of the d44 I have under my crewcab square. Hopefully have it done next summer

[@Dan_BamSR]

Love the new needle nose pliers you used to do the pump pressure upgrade. Those things rock! 3 position needle nose. Take my money!

[@egood4531]

Merry Christmas and Happy New Year to everyone out there.

[@bethanyturnbaugh6657]

Love seeing the old trucks get love. And if you need a place to send that old winch, I have a Jeep that needs one.😅

[@bobtucker8875]

Great content guys 👏. Really like the wood truck. Thanks 👍 for sharing.

[@shawnmacdonald2259]

Paul , I chuckled when you lifted that dif and asked if it means you're getting old . I'm 63 and now when I try lifting something I end up turning to my 24 year old son and ask him to do it . Getting old hurts lol

[@pear7777]

lessons from Paul are great, I'll never use them, but I lov'em

[@ajspak874]

I love these old square bodies I really have to get back to work on mine

[@ScottDeVoreSeabee02]

Good stuff guys. Shawn did some pretty good work on that thing. Hangin' with you guys for a few days and seeing if I can measure up is on my bucket list 👍🇺🇸😎 After the date though, I really thought we'd see a little smooch!😂🤪