Dual layer P320 with TLR1, QLS, and speed lock

[@JamesPiazzaII]

Son of a gun! Add hair to it, I was thinking that in my head as I used that for auto shop 20 plus years of teaching, and then it was said!!!! LMAO!!!! Great videos keep them coming!

[@SingerOfTruth76]

I almost commented “awww man, you should’ve put red washers on it”. But you read my mind! Beautiful

[@smokymountainconcealment5356]

Great video!! Got my ocd going overtime 🤣🤣 I don’t miss blocking for foam pressing at all. You should do a video of your dual layer vacuum form 👍

[@ethan5.56]

Been thinking about getting the stuff to make my own holsters and sheaths. These videos are very interesting and I love the fact I can make my own safariland type holsters. Great video

[@jasonwilliams4390]

Wow, just found you. I was having a difficult time finding a light and rds bearing holster for my wife. I stumbled upon this video because of the speed lock aspect, and I was very pleasantly surprised by your work and site. Will be ordering, subbing, liking, and watching. Your work is great!

[@FalTacUnlimitedLLC]

Hell ya!

[@tagairsoft]

Damn dude this is one of the best custom holster I've ever seen! Keep up the good work.......PS: If I was living in the US I would have been a regular of yours 😂

[@nizarnabhan7573]

Very well done, you make it look very easy.

[@FalTacUnlimitedLLC]

Almost 8 years in the making. But believe me, I still mess up

[@Uppa3-1]

I really enjoy watching your work. Keep up the good work!

[@anraegodley-cooper6321]

Awwwww, your dogs are beautiful, that holster is beautiful, thanks again brother.

[@chrissewell1608]

Sweet looking holster! Nice work!

[@LeadDownRang3]

You have stocks in blue painters tape huh? 😅

[@tonyreed6176]

Do you have a video of explaining how you get retention from blocking

[@FalTacUnlimitedLLC]

You don't get retention from blocking. Blocking stops retention points

[@zsherman31]

I've watched a few of your videos now and you got the sub with the cleeter reference.....keep doin it for dale brother

[@FalTacUnlimitedLLC]

I just bought his newest shirt and the grass lol

[@believe722]

👍Always very informative and entertaining.

[@wth32]

Do you make a holster for the P 320 with a bullet trap?

[@FalTacUnlimitedLLC]

The heck is a bullet trap lol

[@wth32]

@@FalTacUnlimitedLLC I guess that is a question. A bullet trap is what catches your rounds fired at an indoor range when your not hitting the ceiling. It was a joke as the 320 has a history of discharging on it's own.

[@rolfhogfeldt7645]

The devil really is in the details! Beautiful 👍🤠

[@joshmajor8662]

Hell yeah man!! Turned out awesome. I’m building an EZ appendix rig with spare mag, sidecar I guess? Lol it’s my own compact design that resembles a sidecar 🤷‍♂️ this guy picked the ugliest color combo you could imagine too haha desert carbon fiber on front and zombie green on back, it’ll be so ugly it’s gorgeous I believe!! Lol

[@FalTacUnlimitedLLC]

Ya what an ugly combo but have fun building it!

[@joshmajor8662]

@@FalTacUnlimitedLLC I told him to look through my extra kydex and if he found something he liked I’d knock a few bucks off since it was extra material Lol he’s a repeat customer so I go the “extra mile” for him 👍🏼

[@DmzPoncho]

Looks awesome can't wait to get it!!!!!!!

[@ridehi8083]

great work..thanks for showing you beast press.

[@cowboygonzalez7824]

That came out sweet!!!

[@guillermojreyesechevarria5190]

Nice job with camera ... amazing...

[@PB8man]

I know this is an old video... where is the retention point on the TLR? You got a good interface fit at the end of the video... what is it "clicking" on since the trigger guard is a no-go?

[@FalTacUnlimitedLLC]

right behind the bezel is my retention point

[@joshmajor8662]

Ok, the foam drop was impressive!!! Lol

[@FalTacUnlimitedLLC]

Kind of scared me haha

[@joshmajor8662]

@@FalTacUnlimitedLLC haha 😂 I could imagine! Lol

[@procasualty6692]

What is those white blocks you put by the light? And the metal bars you used to make your ridges? Where do I get them. Thanks man

[@FalTacUnlimitedLLC]

The whites are call round widgets and will be available on my sight shortly. And the flat bars are from homedepot. I cut to size. You can also find some at Holstersmith.com

[@procasualty6692]

Thanks man! Love your work

[@corywilson3724]

How do you get the tape to stick to the mold prop? I can’t get mine to stick at all. It’s a real pain holding the blocking in place when the tape holds for less than a min before falling off.

[@FalTacUnlimitedLLC]

Lmfao. Gotta clean the mold my man. Clean with brake clean and or alcohol.

[@corywilson3724]

@@FalTacUnlimitedLLC Thanks, I’ll try brake kleen. I’ve used Dawn dish soap and alcohol but maybe I need a little more elbow grease with it lol.

[@FalTacUnlimitedLLC]

@@corywilson3724 ya not a problem. I actually just mentioned it in a video I'm doing now

[@ForgeItOfficial]

Where did you get the blocking for the hood? I thought I remember you mentioning holster smith, but I can’t find it on their website

[@FalTacUnlimitedLLC]

I have a set from holstersmith and I made the flat aluminum ones. But HS does have it

[@andrewbrewer4635]

I see that you sanded off all the side controls off the mold. Have you noticed any clearance issues?

[@FalTacUnlimitedLLC]

i sand them down so blocking lays flat

[@andrewbrewer4635]

@@FalTacUnlimitedLLC I figured that’s why. I had considered doing that but was worried about messing with the clearance

[@FalTacUnlimitedLLC]

@@andrewbrewer4635 no way. The blocking is usually taller. If not a double up blocking or use a thicker piece. I color it black to remember there are controls there

[@andrewbrewer4635]

@@FalTacUnlimitedLLC ya I’m watching your Hk video now and see that!!

[@thepatriotsrock2]

Are all you're Holsters OWB with these special brackets ect ? Will dual colors separate over time ?

[@mjasgaming9726]

How much would you charge for that?

[@searchBLOC941]

Have you done any suede lined on the outside before? I found a 7 year old Phlster video about it, but I'm curious on your take for application and whatnot.

[@FalTacUnlimitedLLC]

I have done suede inside. You can buy pre applied suede to kydex at holsterbuilder.com good on vac press. Sucky on foam. I've done Cordoba covered as well

[@FredrikNordmyr]

Any plans for a 226 with x300u-a?

[@FalTacUnlimitedLLC]

i actually think i have one coming up

[@phenominalblak9797]

What brand molds do you prefer?…. I’m new to this and There are so many options out there. I’d like to know which are the absolute best to work with….

[@FalTacUnlimitedLLC]

Multimolds for full molds. Palehorse for splits

[@giovanimigoto5489]

Espetacular parabéns 👏👏👏👏👏👏👏🤩

[@joeyparlegreco1983]

Where can I buy the blocking for the flashlight? The rounded widgets

[@FalTacUnlimitedLLC]

Diyholster.com when they have them in

[@adamsgearsolutions]

I ended up buying an 8-32 die to get that stuff off of the Safariland hardware.

[@rafaelperez2005]

Where did you find the rounded widgets for the light?

[@FalTacUnlimitedLLC]

I sell them from time to time

[@prestonfouch7467]

What do you use to press it? 🤔 What jack type is that?

[@FalTacUnlimitedLLC]

modified motorcycle jacks

[@ltgoogle3730]

I would love to see a holster exactly like this but suede lined. Unfortunately I can't find anyone who can even make a holster for my gun without suede lining.

[@FalTacUnlimitedLLC]

I used to do suede lining. However it's a liability. Glue softens after a while and now you have foreign debris in your holster. Plus suede holds dust and dirt good, becoming sand paper. I can do a video on it though. I think I have suede in the shop

[@ltgoogle3730]

That'd be awesome if you could. Thats one reason I always liked the safariland holsters is the suede lining. Even if I couldn't get suede lining, I'd still like to get a holster made but I can't find anyone who can do my specific weapon/light combo

[@LE-6920]

15:47 - what did you sing?

[@FalTacUnlimitedLLC]

Part from Baby it's cold outside

[@11ccom]

Good stuff.

[@sonnyParacraftz]

Hi whats that to replace the muzzle? and how do you attach it?

[@FalTacUnlimitedLLC]

The socket? For the threaded barrel, it's screwed on

[@kirbymoffatt3641]

What kind of press are you using

[@FalTacUnlimitedLLC]

Both my foam press and vac table are home made. They have speakers videos on them too

[@kirbymoffatt3641]

@@FalTacUnlimitedLLC cool I'm going to buy a vac table saw a few between $250&600 any suggestions

[@kirbymoffatt3641]

@@FalTacUnlimitedLLC right on I'm probably going to spend the money on the ones I can just buy cuz I'm a not that mechanically inclined and I'll take a shortcut I don't mind but I'm not going to get started till probably next month and the reason I got interested in this is because I bought a light from my operator last week and I cannot find a holster to fit my tlr1 mounted on an operator apparently the operator slide and frame or bit thicker than the normal 1911 so I started looking into this and I was like hey man come with this I know I'm being long-winded and I apologize but I also want to ask cuz I still haven't found a good holster for this what I'm looking for is a level 2 retention Safari Land type holster that will fit my operator with a tlr1hl if you can help me out let me know I'll pay for it absolutely that's all I wanted brother thank you

[@FalTacUnlimitedLLC]

@@kirbymoffatt3641 I want to say I have the Springfield operator. But I'd have to look at my massive collection of molds lol

[@kirbymoffatt3641]

@@FalTacUnlimitedLLC wich works best

[@AlMasonAsphalt]

Wish I could find them widgets

[@FalTacUnlimitedLLC]

Round widgets are on my website ready to go

[@carlosdanielfantin]

👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

[@FireformOutdoors]

I was wondering why I had not seen any videos seen the sublimation video but KZbin unsubscribed me

[@FalTacUnlimitedLLC]

Oh man, that's messed up!

[@hunterct136]

where do you get your fake firearm models?

[@FalTacUnlimitedLLC]

holstersmith

[@timothystamper9294]

Thought it was supposed to be red and gray... you sure its not foliage green and bubblegum?...🤣

[@FalTacUnlimitedLLC]

I mark the sheets when they come in hahahahaha

[@olechuga2]

Somewhat a clown-ish presentation, but apparently a reasonable work project produced.

[@smokymountainconcealment5356]

Great video!! Got my ocd going overtime 🤣🤣 I don’t miss blocking for foam pressing at all. You should do a video of your dual layer vacuum form 👍