Mercedes Transmission Fluid Service (w/o Torque Converter) Rein/Pentosin - Important Service (722.9)

► Is your vehicle suffering from hard shifting? Or maybe you don't know when the last time your Mercedes transmission fluid was serviced - if either is the case, it's probably a good idea to go ahead a service those components. Kyle shows you how to service your 722.9 Mercedes Transmission from start to finish. This transmission can be found in most Mercedes models manufactured from 2004 to the present. In this video, he performs the service using Rein and Pentosin OE components from CRP Automotive. For a thorough write-up, check out the blog link below.
Shop the Products used: www.fcpeuro.com/products/merc...
Check out the Blog: hubs.ly/H0cN63b0
This product fits the following vehicles:
Mercedes-Benz GLK350
2010 Mercedes-Benz GLK350
2011 Mercedes-Benz GLK350
2012 Mercedes-Benz GLK350
2013 Mercedes-Benz GLK350
2014 Mercedes-Benz GLK350
2015 Mercedes-Benz GLK350
Mercedes-Benz E350
2010 Mercedes-Benz E350
2011 Mercedes-Benz E350
2012 Mercedes-Benz E350
2013 Mercedes-Benz E350
2014 Mercedes-Benz E350
2015 Mercedes-Benz E350
2016 Mercedes-Benz E350
Mercedes-Benz E550
2010 Mercedes-Benz E550
2011 Mercedes-Benz E550
2012 Mercedes-Benz E550
2013 Mercedes-Benz E550
2014 Mercedes-Benz E550
2015 Mercedes-Benz E550
2016 Mercedes-Benz E550
2017 Mercedes-Benz E550
Mercedes-Benz E63 AMG
2010 Mercedes-Benz E63 AMG
2011 Mercedes-Benz E63 AMG
2012 Mercedes-Benz E63 AMG
2013 Mercedes-Benz E63 AMG
2014 Mercedes-Benz E63 AMG
2015 Mercedes-Benz E63 AMG
Mercedes-Benz S550
2010 Mercedes-Benz S550
2011 Mercedes-Benz S550
2012 Mercedes-Benz S550
2013 Mercedes-Benz S550
2014 Mercedes-Benz S550
2015 Mercedes-Benz S550
2016 Mercedes-Benz S550
2017 Mercedes-Benz S550
Mercedes-Benz S63 AMG
2010 Mercedes-Benz S63 AMG
2011 Mercedes-Benz S63 AMG
2012 Mercedes-Benz S63 AMG
2013 Mercedes-Benz S63 AMG
2014 Mercedes-Benz S63 AMG
2015 Mercedes-Benz S63 AMG
2016 Mercedes-Benz S63 AMG
2017 Mercedes-Benz S63 AMG
Mercedes-Benz C300
2010 Mercedes-Benz C300
2011 Mercedes-Benz C300
2012 Mercedes-Benz C300
2013 Mercedes-Benz C300
2014 Mercedes-Benz C300
2015 Mercedes-Benz C300
2016 Mercedes-Benz C300
Mercedes-Benz C350
2010 Mercedes-Benz C350
2011 Mercedes-Benz C350
2012 Mercedes-Benz C350
2013 Mercedes-Benz C350
2014 Mercedes-Benz C350
2015 Mercedes-Benz C350
Mercedes-Benz C63 AMG
2010 Mercedes-Benz C63 AMG
2011 Mercedes-Benz C63 AMG
2012 Mercedes-Benz C63 AMG
2013 Mercedes-Benz C63 AMG
2014 Mercedes-Benz C63 AMG
2015 Mercedes-Benz C63 AMG
2016 Mercedes-Benz C63 AMG
2017 Mercedes-Benz C63 AMG
2018 Mercedes-Benz C63 AMG
Mercedes-Benz CL550
2010 Mercedes-Benz CL550
2011 Mercedes-Benz CL550
2013 Mercedes-Benz CL550
2014 Mercedes-Benz CL550
Mercedes-Benz CL63 AMG
2010 Mercedes-Benz CL63 AMG
2011 Mercedes-Benz CL63 AMG
2013 Mercedes-Benz CL63 AMG
2014 Mercedes-Benz CL63 AMG
Mercedes-Benz GL350
2010 Mercedes-Benz GL350
2011 Mercedes-Benz GL350
2012 Mercedes-Benz GL350
2013 Mercedes-Benz GL350
2014 Mercedes-Benz GL350
2015 Mercedes-Benz GL350
2016 Mercedes-Benz GL350
Mercedes-Benz GL550
2010 Mercedes-Benz GL550
2011 Mercedes-Benz GL550
2013 Mercedes-Benz GL550
2014 Mercedes-Benz GL550
2015 Mercedes-Benz GL550
2016 Mercedes-Benz GL550
Mercedes-Benz ML350
2010 Mercedes-Benz ML350
2011 Mercedes-Benz ML350
2012 Mercedes-Benz ML350
2013 Mercedes-Benz ML350
2014 Mercedes-Benz ML350
2015 Mercedes-Benz ML350
Mercedes-Benz ML550
2010 Mercedes-Benz ML550
2011 Mercedes-Benz ML550
2012 Mercedes-Benz ML550
2013 Mercedes-Benz ML550
2014 Mercedes-Benz ML550
Mercedes-Benz ML63 AMG
2010 Mercedes-Benz ML63 AMG
2011 Mercedes-Benz ML63 AMG
2013 Mercedes-Benz ML63 AMG
2014 Mercedes-Benz ML63 AMG
2015 Mercedes-Benz ML63 AMG
Mercedes-Benz R350
2010 Mercedes-Benz R350
2011 Mercedes-Benz R350
2012 Mercedes-Benz R350
Mercedes-Benz SLK350
2010 Mercedes-Benz SLK350
2011 Mercedes-Benz SLK350
2012 Mercedes-Benz SLK350
2013 Mercedes-Benz SLK350
2014 Mercedes-Benz SLK350
2015 Mercedes-Benz SLK350
2016 Mercedes-Benz SLK350
Mercedes-Benz SLK55 AMG
2010 Mercedes-Benz SLK55 AMG
2012 Mercedes-Benz SLK55 AMG
2013 Mercedes-Benz SLK55 AMG
2014 Mercedes-Benz SLK55 AMG
2015 Mercedes-Benz SLK55 AMG
2016 Mercedes-Benz SLK55 AMG
& Many More - Check the Website For All Fitment Options
SUBSCRIBE: kzbin.info?sub_c...
Get free parts from FCP Euro:
www.fcpeuro.com/page/lifetime...
Follow FCP Euro on:
/ fcpeuro
/ fcpeuro
/ fcpeuro
www.fcpeuro.com/

[@fcpeuro]

Shop the Products used: www.fcpeuro.com/products/mercedes-722-9-transmission-service-kit-pentosin-7229late?

[@geraldasher8020]

@Grayson Elliott I really appreciate your reply. I found the site on google and Im in the hacking process atm. Looks like it's gonna take quite some time so I will reply here later with my results.

[@geraldasher8020]

@Grayson Elliott it did the trick and I finally got access to my account again. I am so happy! Thanks so much you saved my account!

[@graysonelliott5649]

@Gerald Asher Happy to help :D

[@mikesmoot1090]

😳😲Not one damn drip on his light gray 👕 or 👖..... First clean tech I seen ever. 😂

[@PrinceKey1]

Mike Smoot facts!!!

[@kenshaw3224]

Great job, dont forget to do the pan bolt torque dance, 4Nm then 180 degrees tightening to stretch the new bolts that were supposed to be used each time. I think they are aluminum.

[@fixingproblems3183]

Do you recommend draining the torque converter?

[@johnmurphy3621]

Very well explained video for those not so experienced. Absolutely brilliant!!!

[@lawrencelam2083]

Looking all over for a vid like this. Finally, you covered all the details and easy to understand. Thanks.

[@glasser2819]

Benz turned a simple oil service into a doctor procedure. The key is to know how much oil to refill with then no more guess work!

[@TimHeagarty]

Good stuff. Helps me decide what I want to do in the driveway vs what I have the local Euro repair do. Never the dealer!

[@TehArtfulDodger]

Thanks for taking the time to share this great information, it was really helpful

[@samsonevickis]

Great job, looks like I need to get that excellent pump you have!

[@reempire888]

Best video, clear explanation to the point. Thank you, keep up the great work!

[@mikesalkeld4465]

You have a really nice presentation style. Great job!

[@MichaelSchneiderTexas]

Thanks for these videos!

[@zu1502]

Lol your a beast bro no gloves and your hands are still clean !

[@osok5492]

Nice work and simple explanation, if I had the tools I believe I code it myself.

[@welcometomychannelswelcome7261]

Thanks for sharing your experience and video great informative video.

[@PeterDammar]

I really like the way you do things.

[@reddyuda]

What I like to do when setting the level and waiting for the fluid to warm up, is to overfill the transmission, and then cycle through all the gears waiting for about 30 seconds through each gear. That way, you are using all the fluid you opened and cycling as much fresh trans fluid through the engine. If the fluid came out extra black, I will wait for the trans to cool down and let it run a little longer to try and cycle as much fresh fluid through everything as possible

[@topgunner6928]

wisdom

[@aliislam580]

Is this what MB recommends? This sounds like the proper way to do it but maybe there's an underlying condition preventing this sequence to take place which is why MB does it differently

[@reddyuda]

@@aliislam580 no, the MB dealership will just do a quick job, so it will likely just be a straight drain and fill. I recommend doing a drain and fill once, then again after 3000 miles, and one more at the next oil change (7000 more miles). Guarentees the fluid is almost completely exchanged and contaminants flushed

[@aliislam580]

@@reddyuda I previously bought a used 2024 E350 with 110k miles but don’t have the service history. Is it still safe to change the transmission fluid?

[@reddyuda]

@@aliislam580 yes, the main difference being do not flush the system, just do a simple drain and fill. You can keep the old fluid in case of any problems you could swap it back in. With 110k Miles you should be totally fine with a simple drain and fill. Wait 3000 miles before doing any additional fluid changes

[@FRITZI999]

not a single drip spilled !!!! AMAZING !!! :-)

[@blobby750]

4:12

[@vitok2010]

nice, clean and to the point. 5-STARTS

[@fcpeuro]

Thank you, Vito!!

[@isiah8938]

Man I need this guy working on my car

[@youtoobe169]

This is a very well done video and very helpful!

[@derrecksmith7898]

Thank you guys! I mean that! I just changed the the trans fluid gasket and filter. My headache of a car kicks asphalt again. I couldn't have done it without you guys! Derreck Smith. Ps Amazing content!

[@fcpeuro]

Derreck, thank you for watching! Cheers to our headaches!

[@fetahabdelli3518]

thanks a lot for the easy way video.

[@Duke-ih8mo]

Good work

[@daysleeprx512]

Great video!

[@saidscandinaves8639]

Nice job

[@yaprojectolayboy]

Great job

[@MbaekweCabana]

Great job 👏🏻

[@user-qx9sl4fu2v]

Clear and concise video. Thanks. Torque aluminum one time use bolts to 4nm evenly. With torque wrench turn bolt head to 180 degrees or 8 nm and stop turning the bolt 6:42 whatever comes first.

[@RuvimAbaras]

great video, thank you

[@KaranSingh-iz2dx]

I have a 2001 ml320 with the 722.6 5-speed transmission and the drain and filter procedure is similar but there should be a fill tube in the engine bay near the back of the motor, it has a black cap with a red locking pin that’ll need to be replaced once opened/broken (inexpensive). Just measure the quantity of fluid you drained, then put that same amount back in thru the full tube. They also sell a universal Mercedes transmission fluid dipstick if you want to check for accurate levels. You can flush the 722.6 transmission by removing the lower fluid cooler line from the radiator and letting it drain into a bucket. (It will only drain when the engine is turned on) Be sure to fill the transmission up with the amount that drained out of the pan first before doing this (usually around 5L). Then drain 2L from the cooler line and add 2L of new fluid into the fill tube and repeat 2-4times depending on how clean you want it. I usually do a flush every 50,000kms and I’ve got around 280,000kms on the truck now

[@user-dd6if6jd5r]

Oil pan bolts is 4nm PLUS 180 degree turn. Just did the service on wifes S205 today.

[@arttsaroux17]

FCP, thank you for the video, but you need to also provide torque values for the pan bolts (mentioned below by another user as 4 NM + 180 turn) and drain bolt.

[@lenahall1534]

Good on ya mate! cheers from me and Australia Now I can try do my trans

[@maxinrique2706]

Very nice showmen and explanation

[@saasaansaadati7300]

That was great information, thanks

[@fcpeuro]

Glad you enjoyed it!

[@richardpearce3818]

Nice video I need to change my transmission fluid on my e430

[@stanleykania7184]

Ive done this 12 times now.. no issues

[@512TXSDIY]

Dang. Great video. Maybe I should stop making mine… great work sir.

[@alexanderthegreat6480]

Kyle you rock! I have the exact same car. Do you have a garage? Or do you with exclusively at fcp? Where are you located? Thank you for your amazing videos. I wish there were more. I've seen then all already for this car. :)

[@drblaney22]

nice job!

[@lindsayrixon7402]

Wow, now that’s impressive. He’s wearing a light grey top and not so much as one drop of transmission fluid ended up anywhere on his clothes, Respect ✔️, a challenge to which I strive.

[@dirtlint8311]

the way you explain now I can understand fluid level setting. if you can slow down how put over back is good

[@abyssalsoul6216]

So my 2014 Toyota Camry has the over flow pipe that threads into drain and the bung threads into this so there is no need to knock anything off. And there is a fill port up high on the transmission itself and so no need to pump up the new fluid. Drain and fills are super easy. The usual applies , warm up tranny to 113 F( about 45C , I believe) . Its a tedious process with my E350 and I usually renew the overflow pipe and filter along with pan gasket and bolts. Great video Thanks.

[@jeffreyhebda6709]

Excellent thank you

[@desmondou]

Well explained

[@fcpeuro]

Thanks, desmondou!

[@storcas1]

Thank you boss man

[@SavedbyHim]

NIce video! Can you please do the 722.6 oil change too?

[@fabshopmiami]

Thank you!

[@fcpeuro]

You're welcome!

[@E_B-]

Mann u did that with no oil stains clean and quick 😅 😭😭💎💎✊🏿✊🏿✊🏿✊🏿✊🏿😎😎😎😎

[@damron2]

i love fcp euro im getting ready to buy oil and filters to 2 mercedes for the last time. life time guarantee

[@rafaelrjarquin]

You send them your old oil?

[@damron2]

@@rafaelrjarquin I haven't done it yet. But that's what I hear.

[@rafaelrjarquin]

@@damron2 that's what they claim, but I didn't know for the oil.

[@muckydog5806]

I recently changed my transmission fluid on my ML280 W164, however as mentioned in other comments i drained the torque converter, which is a simple job and holds lots a surprisingly large amount of ATF fluid, i then flushed the oil cooler with new clean oil until all the old black crappy ATF ran crystal clear, which took at least another litre, i ended up using around 12 litres in total to complete the task but that included around a litre used to flush and renew the transfer box oil also, might as well do a thorough job if your going to get your hands dirty.... My point is that if you follow this guide as good as it is you will at best only be changing a little over 50% of the gearbox oil which seems pretty pointless to me, especially if you are using all genuine parts as they are quite costly, the sump retaining bolts are of the stretch variety so should be replaced with new items when carrying out the procedure.

[@fcpeuro]

Excellent suggestion, we do offer a 12 liter kit for those looking to drain the converter. It is located here: www.fcpeuro.com/products/mercedes-automatic-transmission-fluid-service-kit-12-liters-pentosin-722-6fck2

[@muckydog5806]

You can change the torque converter and the main pan which is the majority of the oil, i would say 10 litres would be sufficient, i used a couple more but that was in the oil cooler and pipework flushing process.

[@muckydog5806]

The drain plug on my ML is accessed through a hole in the gearbox casing, you remove a rubber blanking plug first and looks a little awkward at first glance, i used a 1/4 drive ratchet and wobble end extension, quite straight forward really. I would check on one of the Mercedes forums first to see if the process is the same on the W219.

[@peiyuzheng7592]

D Farnsworth changing only 50% may be useless in some cases, but sometimes it is might even better to not flush the whole transmission and just do a simple fluid change.

[@marcsmith3881]

The problem is not all of the torque converters have drain holes. I have been servicing MB vehicles for 17 years and I have serviced my share of 722.6, 9s and AMG Speedshift transmisions. If you perform this service during proper intervals, you don't need to go through that process. That is for people that wait until 100K miles. The fluid is not the only reason for the service. The filter holds a lot of material and the magnet can get completely covered with clutch material as well as the bottom of the pan. I have customers with Ford E250 work vans with over 300K on the original transmissions because I change the fluid ever 40K. Hell my work van has 200K on the original transmission and it still shifts firm and I have only changed filters, cleaned pans, and replaced about 4 quarts at a time. All red in color. Your process is for people that don't follow the scheduled maintenance and waits until its a problem. If the conductor plate speed sensors get covered with material because a person waited too long, all of the flushing in the world will not save the expensive bill about to come.

[@zemoney954]

Looks like a great fun company great vids ,been a subscriber👍🏽where yall located?

[@andrewsilverman7954]

Great video, well done. I just want to confirm the transmission bolt torque spec's? Thank you

[@thucvinh6174]

Question: what are the normal on-going operations temperature of this trainy--not just at the beginning when you check for fluid level?

[@avtoboxservice3968]

спасибо друг!

[@Motorsportsgeek]

Is that knocking sound from the enigne normal ? My 2008 c300 has been doing it, less loud then the one in the video but its the same pitch, for over 60 000km now and it hasn't increased in pitch nor got worse so I presume its normal for the m272 engines ?

[@AlGolzari]

Hey Kyle, not sure if you’ll see this but I enjoy watching your FCP Euro videos since I’m a MB guy and you’re the MB manager. I have a stupid question that recently dawned on me. I have a 2010 C300. Assuming that someone can hold the pan steady, even if you need help from a second set of hands, can you not fill the transmission pan with new fluid close to the top of the new overflow plug, and then bolt the pan back up and turn the engine on, wait for the temp to get to where it needs to, and then slowly open the drain plug and see if it’s dribbling?

[@marvinmarcus5957]

No way.. the internal over flow is pipe is higher than the pan I guess.

[@rajasivagaminathan9828]

Great place for buying Mercedes parts. I ruined a new Febi Wheel Hub purchased here, FCP replaced it free of cost, they have this "abuse it and return it for free replacement" policy that turned out to be true. Because of this insurance I expect the price to be little high, so I always compare prices elsewhere, yet find that FCPEuro beat competitor's price 95% of the time. Bought both my front air suspensions (Arnott) here and no worries about it going bad. I would like to find a similar shop for my Odyssey.

[@fcpeuro]

Glad to hear everything worked out well with the replacement.

[@satan15151515]

Some forum discussions recommend resetting the shift adaptations after every fluid change. What is your take on this?

[@statusquoreject]

I have a 2017 AMGC 63S coupe and I need to change the transmission fluid and filter as well as the differential fluid for my 30k mile B service. Does my car have a torque converter that need to be drained? I don't see that covered in this video and I also don't see how you flush out the left over oil in the trans coolers. Don't you need to turn the engine at the crank until the drain bolt for the torque converter is aligned so you can drain the torque converter completely or is that not done on my car? Also, don't you need to remove the return line to the pan and add a hose extension to it so you can flush out the old fluid left behind by pushing new fluid through it. After which you warm up the trans to setting the final fluid level. I plan on doing this next week so I could really use some help on getting clarity on which steps I can skip and which are necessary.

[@seahawksforever9504]

What color should the atf be? red or blue? Also that overflow valve is an indication of amount of fluid needed? Like get it full of fluid and let the excess drain down from the overflow?

[@mratlr]

The torque for pan is 4nm then 180 degrees

[@nvkulk]

How is his shirt so damn clean!!👍

[@fcpeuro]

We try not to question it 😂

[@comsoft]

Is it the same grearbox as the vito w447 (2016)? It sure looks the same.

[@BMWI-gk9wh]

Is it good idea to change fluids when you are not sure if it has been changed. I’ve heard horror stories about bmws and stuff when changing fluids it creates hard shifts and issues with the new fluids. I drive a w212 m276 usually. So I was wondering about these ATF changes

[@4hikers629]

Can you please share the parts# of the drain plug crush washer? Also, do you have another video for draining fluid from the torque converter with a 4 mm drain plug?

[@mercamg9312]

Hi Kyle Is it true that a Mercedes transmission dipstick will suit all models. But the level that is appropriate may be different. The east west engines only need level 4 on the dipstick. Other Mercs can go to level 12 (MAX). Cheers

[@snikwadRR]

Can we get one like this for the ole 5apeed auto that comes mated to the M113k

[@avinstallations]

What about the oil that's left in the torque converter and the oil cooler?

[@user-le6gv2rc8b]

does 7g and 7speed mct shares the same type of trans oil？

[@AndyNav1]

Perfect video! Would this kit be good for 2006 ML500. Thanks

[@fcpeuro]

Yes sir it would fit just fine on your vehicle!

[@kyriakosdrivas1942]

What is the part number for the Pump to transfer the transmission fluid to the pan...

[@vishalmahatoo2581]

Any video with the converter drain?

[@7477238]

I know that the transmission takes way more fluid (TC and cooler lines) but is a partial change done to prevent the transmission from slipping? I ask this because I did a full flush on a high mileage Toyota Camry and the transmission shifted really smooth but it was also slipping. Had to drain some fluid and pour in Lucas Stop Slip. My MB has 95k so I plan on doing this but should I do a full flush (TC and cooler) or just a partial like in this video?

[@fcpeuro]

Just a drain and fill is recommended. It's possible to run into issues when flushing out the torque converter.

[@rusty358]

How did you repair the broken bolt holding the pan?

[@charleshines6155]

I bought some of that 1 LV fluid also. $50.00 for 5 liters

[@kenj.8897]

Nice video . how did you not even get a drip on you ? In your opinion is pentosin a very high quality atf or just mid range quality ?

[@fcpeuro]

Hello Ken, we would consider Pentosin a high quality oil and very comparable to other brands we sell.

[@evgenysushko6692]

I have a question - I was swapping engine and accidentally pulled torque converter out of trans input shaft ( yes I unbolted it from fly wheel ) , so how do I properly refill trans fluid after mistake like that .

[@albertbroadfoot716]

Can it be filled from the top if you don't have the special fill tool?

[@marcelcovaci9922]

My question is , how do you drain/flush the transmission properly? On the 722.6 model after the replacing of the filter and putting fluid in( the older models have a dipstick) you run the engine, open one of the transmission oil cooler lines and drain 1 liter or so, top it off and re do( there is a spec for how much to drain each time). I want to do this job on my own, the stealership wants 800$. I have a 2007 E320 Bluetec. Do I have to mess with the torque converter at all? Thank you in advance

[@Nicole0627]

The dealership wants $1k to change my transmission fluid 😢

[@user-iy1dw7rp3v]

Hi . I need a video of how to drain the oil of the Torque Converter Mercedes gl ThAnks

[@Dnasty1]

Why is it important to monitor the trans fluid temperature and run the car while refilling?

[@SeaRay45DB]

It would be nice if you would include the 5th liter in your kit. This way when you change it on a Sunday, you are not screwed.

[@Docbrut]

Yup been there! Racing to the Autoparts store before they close on a Sunday afternoon for one more Litre

[@tom24gr46]

Would you have to perform this drain and fill multiple times (maybe 2-3) in order to ensure you have more or less gotten out most of the old fluid? I'd imagine that the transmission contains way more than the amount drained and filled in this video?

[@fcpeuro]

Tom, that would be recommended if wish to fully flush the system as best as possible. On a transmission that has been regularly serviced, a simple procedure like this is sufficient.

[@muziqb]

Hi, Is there a video for the MB - X166 GL500 -Year 2014 - Transmission fluid service with Torque Converter drain. Kindly share the link. Thanks

[@Leafyisntherefxho]

Can someone tell me where to find a video of the torque converter draining/refilling process?

[@joemonday4422]

Hey Kyle, do you think I can use a cheap Harbor Freight hand pump to pump new fluid back in using the adapter of course. Thanks

[@fcpeuro]

Most likely.

[@vicudobre9415]

How to change service a Mercedes V class automatic transmission on 2002 2.2 cdi 638 ....4HP-20 ....please help

[@kracksmith4ejm1]

what exact pump you used and what obd reader?

[@gusf8451]

So am I to understand that 5 liter is plenty to change the fluid without the torque converter? because the kit you're selling has 10 liter included please verify , thanks

[@gerardoherrera5547]

My 2010 e550 4Matic goes in gears but won’t move would that mean I have to do a transmission change?

[@mariel1980]

How do I know if my 2016 Mercedes C300 has a torque converter?

[@mahendrasookoo3040]

What about the oil left in the torque convertor.

[@bearsgarage272]

can the fluid be filled and checked through the dipstick tube? i know MB didnt provide dipsticks for the 722 trans, but aftermarket ones do exist

[@fcpeuro]

The 722.9 transmission unlike the 722.6 does not have a dipstick tube. Both the fill and level check are performed from below

[@johnwet5798]

9.5 liter is around that. I almost fill to that number and let the other over flow. Its better to use open/closed valve on your rubber cable so U can see how it dipping instead of take off the valve.

[@rafaelrjarquin]

To set the level, Do I need to put it in gears, or I just let it idling on park?

[@iamher6422]

Rafael Rj he didn’t do a flush, just an oil filter change.

[@francozhou7520]

Do I put the same amount to the 2012 c63? Thanks

[@johnpickens448]

Should have fixed the broken pan bolt, installed the left front cover tab below the pan bolt, and wire brushed/painted the large rust spot and dent in the pan.

[@adanreinosa7599]

Thank you very much Kyle for posting such an easy-to-follow process and others!!....I am ready to order my kit but one question: how about the torque converter? I understand there is a plug in there...a video, somebody else, mentioned No torque converter??...Thanks for all the great videos...Best,

[@mdnh0]

Can I use this procedure on a 2012 C63 AMG with the MCT version of the transmission?

[@glasser2819]

got have exact right fluid though!