FCU Fan Coil Unit Working|BMS Training 2021|Building Management System Training

Limited Time Offer: If you find my videos useful, please check out my BMS fundamentals course on Udemy. Get it for discounted price of only 12.99$ using the below link:
www.udemy.com/course/bms_fund...
. . . . .
. FCU or Fan Coil Unit, which is part of the HVAC system, is used in residential and commercial buildings. As discussed in the previous video the Air handling unit or AHU is installed outside the serving zone and it supplies the conditioned air to the occupied spaces through a network of ducts and diffusers. On other hand, the FCU or Fan coil unit is installed in the room or area to which they are serving.
FCU Fan coil unit uses a fan to take the indoor air and blows it over the cooling and heating coil and then supplies the conditioned air to the room. There are different types of FCU or fan coil units including Ceiling Concealed FCU, Celining Cassette FCU, wall mounted FCU and floor mounted FCU.
FCU valve sizes are small so usually, they use a two-position or floating valve actuator for the cooling and heating valves.
FCU or fan coil unit can be controlled either using a local thermostat without any connection to Building Management System or BMS or they can use a DDC controller to control the FCU or Fan coil Unit.
Here are some related videos:
Control valves Selection video:
• Control Valve Selectio...
Field Device Termination(FCU Thermostat Termination):
• BMS Field Devices Term...
Input Devices used in BMS:
• What Input Devices are...
Please subscribe to the channel:
bit.ly/3gSCrW4
Follow us on Facebook at / tech-systems-106092281...
What is BMS System?
Building Management System
BMS
BMS System
Building Automation System or BAS
BMS Course
Building Management System Training
BMS Training
Building Management System Tutorials
Building Automation System Training
Free BMS Course
Building Management System Course
DDC controller
Direct Digital Controls
Basics of Building Control Systems
Control Systems
building management system Honeywell
what is a building management system
building management system for HVAC
BMS Training
Building Management System Training
Honeywell BMS
Field Devices used in BMS
Input Devices used in BMS
Fan Coil Unit
FCU
What is an FCU
FCU types
FCU Installation
Fan coil unit maintenance
fan coil unit actuator
fan coil unit trane
Please subscribe to our channel.
Follow us on Facebook.
/ tech-systems-106092281...
#BMS_Training
#Building_Management_System_Course
#Building_Automation_System
#FCU #Fan_Coil_Unit

[@TechSystems]

*Transform Your BMS Skills!* 🌟 Enjoying my videos? Dive deeper with my BMS Fundamentals course on Udemy. For a limited time, it's available for only $12.99! Don't miss out - click the link below to enroll now. www.udemy.com/course/bms_fundamentals/?couponCode=A949368A4127D587E926

[@TechSystems]

If you find this video useful please like the video and give me your feedback in the comments section to improve this channel.

[@sathishmahandran6378]

Your videos are really effective and more helpful. Expected more videos on BMS control system. Thanks brother

[@timefighter11]

Well narrated. Tech Systems is really helping me in understanding many things regarding BMS. Thank you. Keep up the good work.

[@ashranulum1898]

Dear Sir the FCU videos really helping me about the fundamental Concepts of FCU. Thanks a lot Sir for making this video and educate the society .

[@TechSystems]

It's good to hear that these videos are helping you to learn more.

[@nadeemsheikh7452]

Well explained. Thanks. 👍🏻

[@mohamedmuguzin9968]

Thanks for your explanation

[@mohamedmuguzin9968]

Its very helpfull to me

[@MDARMAN-xx1jm]

Plz my dear sir . What is filter and why used the filter All Explain tell me sir

[@TechSystems]

A filter is used to catch the dust and other contaminants from the air to provide clean air to the building. Air Filters are used inside air handling units, FCU, indoor units of split AC etc.

[@sayyadafrid5101]

Hi sir. We are waiting for your next vedio. On building management system

[@RizzlerJizzler]

can you explain in details on Niagara controllers?

[@sonjoykumar7270]

good

[@prasobhum3590]

Hi, the videos you uploaded are very helpful. The explanations given are very fast. Please inform the part number of the video in the description.

[@TechSystems]

Thank you for your feedback. Can you further elaborate your concern, I didn't get your point completely.

[@salimyousuf8848]

Well explained What s/w u used for graphic?

[@TechSystems]

Thanks... I used models from third parties and used PowerPoint for animations

[@loveislife8027]

good knowledge 👍👍👌👌

[@javeedhvactechnician7760]

kzbin.infon154GCQG188?feature=share

[@jithinthottathil419]

Some fcu works with return temperature sensor not required thermostat(corridors, lift lobbies etc)

[@salimyousuf8848]

Is the return temperature connected to DDC. ? So DDC ctrls picv & motor ?

[@johnaphone]

@@salimyousuf8848 im currently installing 200+ as a bms electrician. each unit has a trend IQeco controller, that control the picv, measures the supply temp (bead sensor), etc. some fcus have a dedicated wallbus room controller connected to the IQeco. These units, usually about 30, are daisy chained back to a bms panel, Trend IQ4, using belden 9841 for BACnet communication. if their was return air, on our system it would be connected to the DDC

[@salimyousuf8848]

@@johnaphone thanks for the clarification

[@javeedhvactechnician7760]

kzbin.infon154GCQG188?feature=share

[@kamamn4264]

Nice

[@TechSystems]

Thanks

[@10malabdullah10]

👍

[@AKARSH696]

❣️

[@l.crossjr]

Can you explain the two pipe system and its sequence of operation

[@javeedhvactechnician7760]

kzbin.infon154GCQG188?feature=share

[@balajibala9836]

It would be better if u had explained it's maintenance procedures too.

[@fahadrisvi6785]

How can find fault of bms in fcu

[@TechSystems]

Please further explain your question.. What type of fault you want to find?

[@fayazshaik7871]

What about M-O-A operation