Figuring out why my beam scale is off | Dillon Eliminator

  Рет қаралды 567

TinMan

TinMan

Күн бұрын

Пікірлер: 46
@cw2a
@cw2a Жыл бұрын
Woah two in TWO DAYS!! PACE YOURSELF MAN!!❤❤❤❤
@TinManReloading
@TinManReloading Жыл бұрын
We’re going for a record 😂🎉
@Johnny-jr2lq
@Johnny-jr2lq Жыл бұрын
Exactly the same thing happened to me. With my RCBS 10-10 and I checked it against a A&D FX120i, RCBS Matchmaster, Homgeek. All the electronics were the same the 10 10 was off. I think you can take the material off of the pan. Instead of the actual weight on the beam. But that pan has to stay with that beam forever. I believe when you buy them new the pan that comes with the beam is calibrated at the factory with it.
@TinManReloading
@TinManReloading Жыл бұрын
Which one of the poise was it? Did you narrow it down like I did? I think I can fix it by removing a tiny bit of material from the largest poise.
@Johnny-jr2lq
@Johnny-jr2lq Жыл бұрын
@@TinManReloadingI took my weight from the pan itself. I believe when you buy a beam brand new from the factory. The pan has to stay with the scale. They are calibrated together at the factory.
@Johnny-jr2lq
@Johnny-jr2lq Жыл бұрын
@@TinManReloadingI wrote on the bottom of all my pans how much they all weigh. Idk if the actual ink from the marker adds weight or not. But I keep certain pans with certain scales.
@MegaLostOne
@MegaLostOne Жыл бұрын
@@Johnny-jr2lq The poise is reading as over (heavy) already, if he removes weight from the pan itself it will show off even more. The poise could be heavy, the notches on the poise could be cast in the wrong place or the notches in the beam could be off causing the 10 grain scale poise to not ready correctly. I'm curious if he removes the added weight he placed in the cradle and rather than leveling the scale to the earth just zero out with the adjustment what would happen but I think it's to late for that since he said he has already taken a file to it.
@oddballschtuff
@oddballschtuff Жыл бұрын
Check weights seam to be a good place to start from. To really know where it stands. But I think I’d send it to Dillon before I filed on the scale or its parts.
@TinManReloading
@TinManReloading Жыл бұрын
They will definitely come in handy. The file has been introduced 😂
@thorsaxe5881
@thorsaxe5881 Жыл бұрын
(Just me) I would get some Check weights before I would start filing off material from the scale adjustment counter weight. (To me) that way it will be exact or as close as posable when done. - Dave
@TinManReloading
@TinManReloading Жыл бұрын
I’m gonna be picking some check weights up here soon. My biggest thing was trying to make this scale read the same as the scale that I’ve done all of my load development on. That way I know everything is zen 🧘 We’re gonna get there! Thanks, Dave.
@ARPatriot1776Official
@ARPatriot1776Official Жыл бұрын
Tinman call Dillon and they will ship you free most likely the copper color pan that comes with my Dillon scale. I have the copper one with mine. And Dillon may calibrate that for you. I know Redding calibrates there scale. My RCBS 1500 is off a tenth of a grain and I use check weights by Lyman. My Lyman weights are off a tenth of a grain. At least a couple. Enjoyed the video!
@TinManReloading
@TinManReloading Жыл бұрын
I’ll do that! I was wondering if Dillon still serviced these as they discontinued the Eliminator scale a while back. Worth a shot to call them. Thanks, AR Guns!
@HobbiesHobo
@HobbiesHobo Жыл бұрын
☑ OCD is a wonderful thing, as long as you don't obsess over it! 👍
@TinManReloading
@TinManReloading Жыл бұрын
That’s what I do best 😂
@jamespollard1670
@jamespollard1670 Жыл бұрын
I wouldn't file on beam scale parts . If you're getting 2 tenths light compared to the other scales then add 2 tenths weight to the pan and adjust the scale to zero with the adjustment knob .
@TinManReloading
@TinManReloading Жыл бұрын
The file has been introduced 😬
@psykoklown874
@psykoklown874 Жыл бұрын
You would think they'd QC scales a bit better. I'm scratching my head over a similar sort of thing. I have a RCBS CM Lite and a FA Intellidropper. They weigh the same pan a couple grains off from each other, but check weights are correct. They both used to weigh the pan the same. It makes my brain hurt.
@TinManReloading
@TinManReloading Жыл бұрын
Now THAT is a weird one. Wow. I wouldn’t even know what to trust there!
@psykoklown874
@psykoklown874 Жыл бұрын
@@TinManReloading It really does boggle the mind and makes it hard to trust either. Sure would be nice if they included a way to recalibrate them via software over the internet.
@robertpowell2746
@robertpowell2746 Жыл бұрын
Tin man You're a rock star, are you gonna be on Jim's podcast Saturday night?
@TinManReloading
@TinManReloading Жыл бұрын
I don’t know about a rock star. I’m just a tinner 😂 I probably will be, yes! Would be good to talk to you again, Robert!
@T.A.B.Videos
@T.A.B.Videos Жыл бұрын
👍👍
@jh5869
@jh5869 11 ай бұрын
My initial thought is "WHY?" Truth be known, I have a Hornady balance beam scale that is way worse than your Dillion, and drives me crazy.
@TinManReloading
@TinManReloading 8 ай бұрын
If I knew why, I’d be a rich man 😂 I think they just like to mess with us!
@jeffhuntley2921
@jeffhuntley2921 Жыл бұрын
Huh. I’ve got check weights somewhere. I have a few of those cheap digital scales. I would’ve expected the base weight fix would’ve taken care of it?
@TinManReloading
@TinManReloading Жыл бұрын
I would have too, but then I thought to check all of the poises. Think I found the culprit?
@MeasureInGrains
@MeasureInGrains Жыл бұрын
I don't trust any scale. I just make sure a single one is repeatable.
@TinManReloading
@TinManReloading Жыл бұрын
They all lie 😬
@mckwilly
@mckwilly Жыл бұрын
How-Dee !.. wait...now did you put the pin in the middle, inner or outer edge of the pan tray ? 🤭
@TinManReloading
@TinManReloading Жыл бұрын
I cut it into 4 pieces and spread it out evenly 😅 Good to see you, Mahck!
@mckwilly
@mckwilly Жыл бұрын
@@TinManReloading Atta boy 🤣
@CrankyCleatus
@CrankyCleatus Жыл бұрын
Doesn’t your chargemaster come with a 50gn check weight for calibration? I know mines does but don’t think you have same model. Check weight is the only way to know which one is correct.
@TinManReloading
@TinManReloading Жыл бұрын
It’s 50 gram, not 50 grain. That’s 717 grains. Lol. More than the beam scale can handle. I don’t want them correct, I want them both to read the same 😂 But you’re right. Check weights is the only way to know.
@CrankyCleatus
@CrankyCleatus Жыл бұрын
@@TinManReloading Doh…didn’t realize it was THAT heavy. Didn’t someone you know claim to make the most accurate check weights ever?
@JP1AO
@JP1AO Жыл бұрын
DO you zero your digitals each time? It makes a difference. Also if you work your loads up it doesn't matter as long as you use the same one all the time a tenth or 2 won't matter. It's consistency that matters.
@TinManReloading
@TinManReloading Жыл бұрын
I do zero my digital scales and calibrate them each session. I just wanted the beam scale as a backup in case my Chargemaster crapped out. I’ve done all of my load development on the CM so having a beam scale that reads the same as it would be pretty great. Hence, the reason for me chasing my tail on this thing. Lol!
@ocean374
@ocean374 Жыл бұрын
Ok close but no cigar 😂 you need to empty out all the shot put it together start adding till you are zero then take everything in the pan put it in the bottom cup then fin tune with the wheel and you should be good
@TinManReloading
@TinManReloading 8 ай бұрын
That’s what I wound up doing. This thing was driving me nuts 😂
@harmungus
@harmungus Жыл бұрын
You want to try a Lee scale?
@TinManReloading
@TinManReloading Жыл бұрын
Absolutely not 😂😂😂 But thank you!
@MeasureInGrains
@MeasureInGrains Жыл бұрын
Take the kid out of the dryer
@TinManReloading
@TinManReloading Жыл бұрын
She was kicking the shit out of her crib upstairs to let us know she wouldn’t be napping today 😂
@unclejim2330
@unclejim2330 Жыл бұрын
Try backing the screw out on the big one if still no ,,,remove from that. I can weigh mine but you’ll just ignore me again. 🤭 At least the nose of the body isn’t pointing in the air anymore. 😂🙀👠💥🪓
@TinManReloading
@TinManReloading Жыл бұрын
I didn’t ignore you, I didn’t comprehend your text message 🍼👶 I saw that screw and was wondering what the hell it was for. There’s no mention of it in any manual. Good call. I’ll try messing with it tomorrow! I wonder if there’s a 0.2 grain piece of dirt in there 😂
@unclejim2330
@unclejim2330 Жыл бұрын
lol! 😂👍🎄🇺🇸🕺🏻🎯⚖️⚖️⚖️
Dillon Eliminator beam scale inspection | Boring
12:21
When Rosé has a fake Fun Bot music box 😁
00:23
BigSchool
Рет қаралды 5 МЛН
Deadpool family by Tsuriki Show
00:12
Tsuriki Show
Рет қаралды 7 МЛН
THIS is Why Your Heat Bill is So High
18:21
Home RenoVision DIY
Рет қаралды 1,3 МЛН
I Forged A Knife So Sharp, It Can Cut Through Reality
18:47
Random knives
Рет қаралды 14 М.
Making a Awesome Lathe Tool
9:11
Metall Antik
Рет қаралды 315 М.
Can You Charge A Phone with Marbles?
18:06
Engineezy
Рет қаралды 1,3 МЛН