Filling my nitrous stroker 305 with Hard Blok. Another step to get ready for

SQUAREBODY STUFF MERCHANDISE IS HERE!!!!!!!
teespring.com/stores/squarebo...
Link to #NoNameNationals event
l. l.php?u=http%3...
#NoNameNationals on facebook
events/34818...[%7B%22mechanism%22%3A%22search_results%22%2C%22surface%22%3A%22search%22%7D]%2C%22ref_notif_type%22%3Anull%7D
Check out my other Channel Regular Stuff.
/ @regularstuff6585
Help support the channel and become a patron.
/ squarebodystuff
Donate to our projects here.
www.paypal.com/biz/fund?id=84...
TikTok
www.tiktok.com/@therealsquare...
Email me
[e-mail]
Follow us on Instagram
/ squarebodystuff
Go like my Facebook page too!!
/ squarebodystuff
Send me a message
m.me/squarebodystuff

[@brandt_murphy_garage]

Looking like a wicked build man! Can’t wait to see the results!

[@SquarebodyStuff]

Thanks.

[@a1automotivemachine144]

Alan Hood is a good dude. I've only had a few conversations with him but always helpful and knowledgeable!! Good luck with the build!!

[@SquarebodyStuff]

He is, he has always treated me good.

[@squarebody8454]

Looking forward to rest of this build! Glad you arnt just slapping a junk yard special 5.3 in it.

[@SquarebodyStuff]

I'm not a ls swap fan.

[@BubbaAyers1969]

Great video, thanks for sharing with us

[@SquarebodyStuff]

Thanks.

[@gregoryarmstrong3353]

Looking forward to the rest of the build!

[@SquarebodyStuff]

Thanks. Hopefully I'll get more figured out on the gimble. I think it's gonna have several uses for the channel.

[@gregoryarmstrong3353]

@@SquarebodyStuff No doubt you'll find use for it...another tool in the tool box.

[@Clydes.Shop78]

Had many flights in and out of Pamona. I really like West Plains. The beard sounds a bit like walking in leaves with mic there. God stuff as usual!

[@SquarebodyStuff]

Small world. Yeah, the foam covers in the mic didn't like the beard. I just got some furry covers and gonna try them. I like the idea of keeping it hid, but I guess I can try just clipping it to my shirt.

[@Clydes.Shop78]

@@SquarebodyStuff clip it directly to the beard!

[@SquarebodyStuff]

Lol, I tried that. It a little annoying.

[@StreetCarChronicles]

Great video man! looking good !

[@SquarebodyStuff]

Thanks.

[@gregoryarmstrong3353]

Thanks for authentic material!

[@SquarebodyStuff]

Keeping it real since 1979. 😅🤣

[@Chuck_S]

Because........ Race Truck!!!

[@ericburns2421]

Did I forget to mention the Holley carburetor to use either use a 600 manual choke that's been jetted or either a Holley 600 or Holley 650 spread bore you know with vacuum with electric choke either one try those on for size along on squeaky and see if that see if that helps you know improve performance but like I said good luck with that good luck with squeaky I love to see him

[@SquarebodyStuff]

I have a 750 double pumper I'm running on him.

[@bertmorlas3534]

Hey man sweet video, does the hardblok instructions recommend waiting to machine the block until after filling or does it matter?

[@SquarebodyStuff]

Yes, you need to full it before having it machined. The fill can expand enough to distort the cylinders just a little.

[@MostlyOldPartsAndRust]

Looks great Chad! I wonder if putting an old electric sander strapped to the side of the block would help even out the grout after it's dumped in?

[@SquarebodyStuff]

I actually beat on the first side with a rubber mallet and tried an air hammer, but it didn't flow out any better.

[@robbycard4293]

HowDo Chad.I. Like the idea that your running the splinter caps in which will give you much stronger bottom end.That little ole motor oughta run like JACK. THE. BEAR! 👍🌟🌟🌟🌟🌟🏁🏁

[@SquarebodyStuff]

Thanks. I'm hopeful that it runs good.

[@briantomes2564]

Haven't been on KZbin in awhile I had to put my c10 on the back burner an fix my new used 2004 dodge 1500 an that turned out to be a nightmare but she get it now

[@CSXT8250]

Hold onto your Red Man cats and kittens... This is gonna be one nasty little small block.

[@SquarebodyStuff]

Lol

[@ericburns2421]

If you want to improve on squeaky here's some here's some more performance tips try going with a roller cam part number 12-422-8 it's a four it's a 495 502 lift 270 276 duration with a 110 lobe separation RPM 1,000 to 5400 and go with a set of world product s&r torker heads part number 042650-1 just do a very mild Port job just cleaning them up and pocket portal and I'll bet squeaky will not squeak anymore go squeaky go I'd love to see him when he's done with this stroker holla if you hear me

[@jeremiah_c10]

Was that block a 4 bolt main or a splayed 2 bolt main looking to do this to my sbc 350 2 bolt main wanting to make it into a 388 stroker

[@SquarebodyStuff]

It was a 2 bolt 305 block. I added the splayed main caps

[@jeremiah_c10]

@@SquarebodyStuff do you got a video of how you did it I’m looking forward to doing my 350 the same

[@SquarebodyStuff]

This is the complete playlist of the build.Nitrous 339 stroker build: kzbin.info/aero/PLzr1ksHJJMTzVJxE2woEkBJWK270g23Og

[@HSTvids357]

That block should be ready for Armageddon once it's machined with the fill and the splayed caps!

[@SquarebodyStuff]

That's the plans.

[@tristanabell2117]

How much does it effect the cooling capability?

[@SquarebodyStuff]

Honestly can't tell you. I've never tried it. Only going half full like I did still has plenty of cooling for the upper part of the cylinders where the biggest part of the heat is generating.

[@tristanabell2117]

@@SquarebodyStuff thanks for the reply I'm super interested in learning more about this. Keep us posted. Thanks!

[@SquarebodyStuff]

I will.

[@ericburns2421]

Going on in my house p

[@jacobcarter9189]

squarebody

[@SquarebodyStuff]

I always look forward to your comments.

[@natevanlandingham1945]

@@SquarebodyStuff ,🤣🤣🤣🤣🤣😂😂😂🤣🤣🤷🏻‍♂️ I need to pay more attention and look for them!

[@TTGTO288]

First of all, who even touches a 305, let alone tries to stroke one? I was an engine machinist for over 20 years and only ever rebuilt 1 of these turds. The owner came back later and told me i was right to suggest a 350, he just didn't listen.

[@SquarebodyStuff]

Someone with more money than sense I guess. Just doing something different.

[@TTGTO288]

@@SquarebodyStuff Just doing something that no one does because 305s are garbage. No one wants them, so I guess they are cheap to build and blow up ...

[@blackenedmagic888]

@@SquarebodyStuff I mean, why not? If you can get some decent horsepower with a 302, you should be able to do something good with a 305, right? Cheers from Canada!

[@TTGTO288]

@@blackenedmagic888 Not exactly. A 302 is a big bore short stroke engine, a 305 is a small bore long stroke engine, not to mention all the other issues they had ...