Finally back in the woods with Adam's ported 268xp!! Pipe testing!!

[@scavuman]

"Pulls Chain With Authority !" I like that - Very Nice Build !

[@aaronpowell4885]

A beautiful example of a 268 and a great running all around work saw👍 So awesome of you to gift it back to Adam! Will be interesting to see how that titanikel cylinder is wearing in!

[@tdawg8605]

Love that 268, like I have said I have one and my dad has one. Your play list on this saw has helped me get these two saws purring. Not ported, just tuned up properly after seals and carb kits. I run an 18" bar with a full comp chain, that's all I need. I use the bar length to measure my billet length and the saw cuts like mad with the shorter bar. We cut 20 to 30 cords a year with them. Adam is going to absolutely love running it. I also think I'm going to build a pipe for mine and see what the difference is. Take care Tinman Mahalo 🤙🤙🤙

[@yakbranson]

Hey tinman! I was just watching another channel that is a small engines shop. The channels name is (chickanic) she just did a parts room walk through and showed a large section of McCulloch new old stock. She said if anyone needs any get in touch. Just fyi

[@shaner67]

NAILED IT!! Been there so many times on the farm Tinman. It's all good when it's your own saw but if it's a hired faller they don't take to kindly to that. My experience is all.

[@bellyacres7846]

So great to see that saw cut! yeah that is a fine pipe too. it sounds good the starting of that saw is just what Id enjoy.

[@111000100101001]

Good running powersaw! She sounds like her mouth is full cutting that maple with full house, maybe skip would’ve helped there but otherwise a strong midrange saw that is reliable and fun to fun :)

[@nathanbroomfield4953]

The only time we cut wood here in Labrador is in winter. Snow up to your chest or not, we use snowshoes. I’ll have to send you a pair of Labrador snow shoes!

[@petergreco2220]

Tinman I enjoy your videos .Your information is quality and accurate, keep up the great channel

[@jimgroulx3956]

Het Tinman. Looks like Adam is getting a rippin good saw. Thanks for the vid

[@JoelNix29]

Good stuff man. Keep it coming

[@Rein_Ciarfella]

Is it my imagination or are you pumping out videos at an astounding rate?!!!

[@justinweaver8787]

Spunds very good an cuts excellent great job on this 1 as always.

[@davidcarberry3547]

saw runs great , one nail is all it takes usually, some narally old maple, good job anyone would be happy with that

[@johnarnettsways.8758]

Great saw. Very good work my friend.

[@justinweaver8787]

Very nice saw an i absolutely love the pipe id give my eye teeth for 1 on my 395xp. U do great work sir! Hope ur week is goin good.

[@welshwarrior797]

Thank you tinman my friend loving the videos every day 😀🔥

[@timhart2652]

Man brother I love you you're good people hopefully we can all hang out in Michigan if bucken's going to do it this year but thanks for the video as always you're always there for us that's for sure

[@ozdatman]

Solid saw, you would be pretty happy with it.

[@eurokid83]

I just picked up a really nice low hour 266XP and I gotta say it’s pretty impressive bone stock.

[@tinmanssaws]

They are great saws

[@cameronhamer9432]

I don’t like to be critical , keep both hands on the saw when cutting , l see Buckin ‘ Billy Ray do it all the time . If that saw decides to kick , it may get you . It becomes a bad habit . I always work alone , falling and bucking can be dangerous . Stay safe enjoy 👍🇨🇦

[@famasmaster2000]

That saw sounds sweet !!

[@redman715]

I swear you have got the gnarliest trees

[@tinmanssaws]

I think we may. It's all the wind and the lomg harsh winters perhapse.

[@zack6892]

Man that thing is a ripper those series husqvarna are really nice.

[@tinmanssaws]

They are one of my favorite saws

[@zack6892]

@@tinmanssaws I’ve only got to run a few from that year but they felt like modern saws. I had a 272 I rebuilt with a hyway pop up and couldn’t believe how well it pulled a 28” stock. I’m sure they are even better after your done working on them.

[@whatnowstinky]

i felt those nails. 😆 that is a damn nice saw.

[@davt8615]

Goes well mate sounds good to

[@justinweaver8787]

That's how to build a great work saw.

[@dennisconstantine624]

One nick of steel and its a resharpen.

[@timwatson7254]

That husky runs nice

[@markatkinson9963]

I notice you are using one of the Husqvarna guides there. I find that it is pretty useful in building consistency with angles. I like it with the Xcut chains. It works.

[@robertsmith7580]

That saw is a Cadillac !

[@AaronTheViking250]

i have I'm originally from Winnipeg mantioba so snow that is chest deep that was a normal dumping for us lmao.

[@jensenwilliam5434]

Thank you!!!

[@caseystyer2996]

So 3 weeks ago I got hired as a husqvarna mechanic. I gotta say your videos now hit harder lol. Have you heard of a no start condition on the 455's if you rum them hard and not starting after running out of fuel? A customer said his 455 WILL NOTstart hot if it runs out of fuel, and he refills it. I have a theory that the carburetor gets heat soaked because it doesn't have fuel running through it / cooling the carb off. What do you think?

[@DaveyBlue32]

It’s clean and shiny!!! I hate to use a saw that’s that clean!

[@un-_-known688]

Ya port one yav ported them all

[@TimHill-f7q]

What were your timing numbers TinMan?

[@TheF1shh]

how on earth do you replace the brake band on the wire frame chainbrake saws??

[@tinmanssaws]

It's been awhile since I've done one. I remember it wasn't fun.

[@olafvidar9315]

What kind of tree was that Tinman?

[@linkwokeup]

Damn, those nails would frustrate the hell outta me lol.

[@markatkinson9963]

I loose my mind when I hit a nail or staple.

[@jamiedalluge9472]

Not mch worse then hitting metal or a chunk if mud froze to the wood in winter

[@jeffreyrubish347]

Dang. You'd best invest in a metal detector!

[@ericm5799]

TinMan glove’s help keep you from cutting yourself.🧤

[@yogieleksel7471]

Link order exhause chainsaw bro

[@markatkinson9963]

Hate that sound when you hit a nail or staple!. It is the worst when it is a new chain too.

[@aaronpowell4885]

Seems like I can go tank after tank of fuel without any metal or imbedded rocks. But sharpen or put on a new loop, usually when I'll find it😖

[@rydplrs71]

3-4 tanks.,,,that’s a season worth……my neighbors hired fly by night blogger. They failed the decent person test, and decent saw test. F them.

[@leonardobatistarocha7956]

O Machado e a Motosserra Eli Silva & Zé Goiano Composição: Moacir dos Santos / Zé Goiano o machado e a motosserra tiveram uma discussão motosserra diz que é orgulho da evolução machado pra mim já era pois vem do tempo de adão você agora só serve pra fazer calo na mão motosserra dá um ronco relou o dente no tronco já se vê o pau no chão a serra chamou o machado pra fazer uma porfia machado aceitou na hora e quando chegou o dia entraram junto no mato pra mostrar a serventia a motosserra roncava machado velho tinia e naquele matagal foi só cavaco de pau pó de serra que subia e esse grande duelo deste jeito é que termina na briga das ferramentas o machado é que domina motosserra parou cedo ali no tronco da quina machado seguiu cortando mata grossa e mata fina motosserra impotente rebentou sua corrente acabou a gasolina que isto sirva de exemplo para toda humanidade e você que é tão jovem tem que saber a verdade respeite bem os mais velhos não brinque com sua idade uma pessoa idosa também tem utilidade é um diamante valioso se não tivesse o idoso não teria mocidade

[@dirtydogvideo]

that 268 sounds badass! i have a 268xp and love it.

[@whatnowstinky]

i felt those nails. 😆 that is a damn nice saw.