Finally fixed!!! air conditioning in the 1997 f350!!!

In this video I attempt to fix the non working air conditioning in my 1997 for f350 powerstroke.

[@savage6394]

PRINEVILLE! Thats where my Dad grew up and all his family still lives.

[@waynep343]

Hint. The blower motor ground side wire is orange and black. You can make the blower motor to spin faster by installing a switch to run the orange and black wire directly to ground. This bypasses all the fan switch and resistor wiring.

[@KevinThomas-kxtphotography]

As a refrigeration engineer this made me smile. We practise black arts. 😊😊😊😊😊

[@jstar1000]

You should change the dryer as well as its contaminated.

[@RugbyEdwards]

I love that pickup! I wish I could find one like that!

[@shakes7333]

Moisture boils under a vacuum. Anytime the system is opened air gets in. Air has moisture in it so it turns to steam and is pulled out. I hope they added at least 1oz of oil to the system to compensate for the new condenser.

[@jeffclark2725]

Great video, always like being invited along on your adventures

[@AppalachianPatriot]

Always change your schrader valves.

[@jstar1000]

You should pull a vacuum and run nitrogen through the system to pull out moisture then add Freon.

[@TxJacob713]

No need for the nitrogen unless their is a leak. You also run the nitrogen before pulling a vacuum, then you add refrigerant.

[@jstar1000]

@TxJacob713 yeah nitrogen first of course, it cleans the system, he had a hole in the line, that's a huge leak.

[@EatCarbs]

Very cool.. Nice looking truck too. Thanks for the video

[@Gwlyddyn]

If those headlights are plastic you can just wet sand and polish them and they'll be good as new. Glass however is another thing..

[@SLAYERCAM]

There needs to be a video on the vacuum lines that control the dash and vent components. ...in other words, what happens with good a/c but nothing blowing out??

[@orenhicks1051]

Good job 👍

[@rfaulkner9597]

You need to put vacuum on first to remove moisture

[@Redkneck]

Make sure they change the orfice tube

[@rosshall641]

To start tri high pressure switch in it first that's back in the day where everything was bulletproof

[@chrispennington8548]

92 degrees lol. It’s way over 100 here in north central Texas. 92 would be a cold front

[@ponyboyjl13]

What a stupid flex

[@LakeStarnes]

You mean southern Oklahoma? Come down here to south Texas and then I’ll ask if you’re a bad man 😂

[@chrispennington8548]

@@LakeStarnes south just has more humidity. It get just as hot up here just as it does down there. I’d like to see you work in my environment

[@ChickenParm152]

should paint that toolbox and those bed rails unless you plan on removing them.

[@henkoosterhof5947]

Its a liquid to gas proces. As well as fixed point pressures. The compressor pressure up the cooling medium formerly known as freon. It becomes liquid. Then a small orifice let the pressure drop. Pressure and temperature are corresponding numbers. On this lower pressure it wants to be gas. To become gas it needs heat. Thats the heat taken out the air blown in your cabin. Then you go back to the compressor and a second heat exchanger to make it liquid again. When the pressure is to high you wont reach the necessary points(pressure/temperature) for the system to work. Dont know how expensive these bottles are, its worth a try but not a guaranteed fix. Whats wrong with your preheat system of the engine? Dont these engines have glowplugs?

[@charliesustaita6545]

How much did it cost for the shop to recharge the system. I have a 97 also

[@Bigdaddyslasher]

Awesome

[@kevinmoore342]

Hey the 7.3 is for everyone. Get ahold of C&C equipment KZbin channel they’ll show you why 7.3 is the best. You guys should do a collaboration with merlins outdoor garage or Matts off-road recovery. Come on your channel is awesome just as good as there’s. You have a great personality you’re channel could be awesome. People love heavy equipment and diesel mixed together. Shit you have both and so much more. Your a win win. Shit I’m nobody and l could come and show you how good your are. Dumb asses.

[@Redkneck]

Jump the ac compressor if it comes on it's low on freon

[@daltonboley88]

Just talking about cold air caused that thing to cold start.

[@andrewk6844]

did you replace the dryer

[@tedbiernacki376]

So who's the blonde movie star ?😊😊

[@alexkoci2130]

Check out OBS solutions all OBS Ford parts and pieces

[@donsorrells2552]

Put a can of oil in it

[@ktmcc4360]

Nice truck. Too bad its a power joke.

[@garychaiken808]

Good job 😊