Finished Sine Plates

[@RRINTHESHOP]

Nice job on the Sine Bars. Great idea on the air rifle. Thanks Steve and family.

[@SolidRockMachineShopInc]

You are welcome Randy. We hope it serves you well. Steve

[@AmateurRedneckWorkshop]

Nice sine bars. Lucky to find someone to fix up that old air rifle. I had a pump up Benjamin when I was a teen.

[@SolidRockMachineShopInc]

Hi Harold, Actually Paul found me, I didn't know of him until he contacted me with the gift of the carbide balls. We shared back and forth with email and finally a long pleasant phone call. I watched a KZbin video of a man shooting a Beeman R7 tuned by Paul and it was incredible how accurate and smooth it shot. Really looking forward to testing the gun when Paul is finished. Steve

[@ROBRENZ]

Very nice work Steve! ATB, Robin

[@SolidRockMachineShopInc]

Thanks Robin. Steve

[@tomeyssen9674]

Great video as always. Thanks!

[@SolidRockMachineShopInc]

Thanks for watching! Steve

[@James-fs4rn]

👍 enjoyed as always. Thanks

[@SolidRockMachineShopInc]

Glad you enjoyed it. Steve

[@testyourdesign233]

Gonna have to get up there for some lessons on that grinder one day. Thanks for sharing.

[@SolidRockMachineShopInc]

Your always welcome Stephen. Just let us know when you want to make the trip. We can cover a lot in just a few days. Steve

[@wileecoyoti]

Beautiful work as always!

[@SolidRockMachineShopInc]

Thanks Ryan. Steve

[@flyingshards595]

Thanks for sharing your expertise with us! Very cool grinding setup!

[@SolidRockMachineShopInc]

You are welcome. Steve

[@kevinzucco8358]

Thanks for the new video👍

[@SolidRockMachineShopInc]

You are welcome Kevin. Steve

[@PaulWattsSpringGunning]

Looking forward to the project! Thanks for the shout out.

[@SolidRockMachineShopInc]

Your welcome Paul. I am looking forward to seeing it after you are done. We plan on doing anther video showing the results of your work on the gun and have one of the kids shoot it. Steve

[@bcbloc02]

Looking forward to the rifle getting fixed up. Shooting is a lot of fun. I particularly enjoy doing 800-1200yard shooting as I enjoy the challenges of the longer ranges. Do you ever judge how a hole is cleaning up by how much the air hose moves on the grinder? :-)

[@SolidRockMachineShopInc]

Hi Brian, No I never used that technique, I ink the part up an do a visual. These parts are indicated in so I already know the run out before grinding. Steve

[@RyanWeishalla]

Nice work on the sine plate. I've never seen or shot an air rifle like that. Hope all is going well for you and the family.

[@SolidRockMachineShopInc]

Hi Ryan, That was one of the nicest air rifles I ever owned after it is finished it will stay in the family going to my youngest daughter. Paul is a great at what he does, looking foward to seeing it in action after it is done. Steve

[@RyanWeishalla]

@@SolidRockMachineShopInc Hopefully you can get her to agree to you doing a short video on her shooting it. Say hi to Rachel and Kathy for me.

[@TheKnacklersWorkshop]

Really nice work and an enjoyable video... Thank you.

[@SolidRockMachineShopInc]

Glad you enjoyed it. Steve

[@billchiasson2019]

Beautiful sine bars! They look amazing!, your Kurt vise did you do a video on the modifications you’ve done on it? Thanks Steve.

[@SolidRockMachineShopInc]

Hi Bill, I did cover some of the modification on the vise here kzbin.info/www/bejne/rn-4Xo2liLeCe6M We may have to do a future video on this topic. I have one other change I haven't made yet maybe that would make a good video. Steve

[@CraigLYoung]

Thanks for sharing!

[@SolidRockMachineShopInc]

You are welcome Craig. Steve

[@outsidescrewball]

Enjoyed

[@SolidRockMachineShopInc]

Thanks Chuck. Steve

[@hereticswissery9010]

Wow 1thou by pass with résine bound wheel without must lubricant and cooling is pretty amazing. What about surface finish? Really enjoyed the video Steve👍

[@SolidRockMachineShopInc]

Hi Simon, The planet 600 blows air mixed with oil out the front toward the wheel. This help a lot when using the CBN wheel. For the most part though it is the quality of the mandrel from Continental Diamond Tool. As you most likely know the finish of CBN looks different and rougher than Aluminum Oxide wheels but when you check them with a surface checker they are very close. I often use CBN to rough difficult material to less than .001" and finish with Aluminum Oxide wheels. I don't do this with ID mandrels as the finish and fit are very good.

[@hereticswissery9010]

@@SolidRockMachineShopInc I will check on them... I never really had luck with resine I mostly used plated mandrels. That planet 600 very look like the tool for this kind of job!

[@SolidRockMachineShopInc]

I love that Planet 600, it does a great job. I used plated and resin both and in most cases like the resin better.

[@youcoulduseit7492]

Ya the air rifle's are my thing too. I have some "grown up things to do" with the machine tools no avoiding it. a multi shot tazer that shoots the dart at like 200' sec multi shot like a l;ight saber flash light for blinding in the middle sombody get to work on that.But I'd go 50 power adjustable parralax with a sqewer clamp relaese for mounting just to see if it zero's every time. not much into springers . changing barel's quickly is a big plus choke a tight one with a lap and just see like a crosman .22 or .25transfer port and stuff so it shoots right the crosman .22's are like 925 or so fps with there domes real stable for the price

[@SolidRockMachineShopInc]

Check out Paul's page he does great work! Steve

[@SuperAWaC]

Do you have a price set for the sine plates?

[@SolidRockMachineShopInc]

Yes, we just raised the price from $450 to $575. There is just way to many hours in them to sell at $450. I still have a few left in this batch that still need grinding that I will sell for $450 if you are interested. We have a price list of our products at the end of the video that will be on all the videos shortly. Steve

[@SuperAWaC]

@@SolidRockMachineShopInc i'll definitely take one. i will be sending an e-mail shortly

[@SolidRockMachineShopInc]

@@SuperAWaC OKay I will add your name to the list. It will be awhile before I can get to it because I have to get the next batch of Squareness Comparators done first. Steve

[@MCEngineeringInc]

👍🏻👍🏻

[@SolidRockMachineShopInc]

Thanks Craig.

[@roysmith3198]

One and a half tenths, Is that 150 millionths?

[@SolidRockMachineShopInc]

It is .00015". Steve

[@SuperAWaC]

yes