Finishing The Nose Job & Hood Insulation Fix - BMW E28 520i Front End Restoration Pt.2

This is the second and last part of the rebuild of my BMW E28's rusty front end.
0:00 Intro
0:52 Anti-Gravel Spray
2:13 Parts Refresh
8:49 Front Respray
11:33 Rebuild
19:24 Hood Insulation & Water Tray Fix
25:42 Outro
MERCH:
You can support me on:
Patreon: / memphisyt
You can follow me on:
Instagram: memphis_youtube
Discord: / discord
---- Music by ----
Epidemic Sound
www.epidemicsound.com​​​​
Contact me:
[e-mail]

[@nigelbond4056]

Wow! The E28 looks like new. Honestly, I think you’re some kind of genius. You must have the patience of a saint to get the results you do. Every one of your videos is essential viewing 👏👍🏆

[@kris856]

M539 restorations belgian twin 🤣

[@habsom1406]

Totally agree with you Nigel.

[@davidblackwell7958]

My Day just got better, Memphis time🍻

[@mareks26]

just what i needed this evening!

[@KnightHunterStudios]

This E28 gets better with every single episode! The hard work Memphis is paying off, the car is absolutely stunning! Cannot wait until the next episode :)

[@charliecoco2115]

I have never seen anyone come along to be so talented and learn new skills in such a small space of time. Amazing!

[@hawkertyphoon4537]

It is very smart of you to take a Moment, take a Break, and refglect on your good and bad choices you made along the way. applause!

[@fernandoilroso]

The good ol" B-hall trick with the sealer on the battery tray :D

[@matreyia]

It's the effort into removing all those rust parts and re-welding that is incredible. Bravo sir.

[@EnriqueLopez-hb5jn]

That BMW just simply gets better it is like it is almost restored.

[@adrianbennett9322]

The old girl is looking fantastic, well done on your hard work! So great to see some love given to these classic cars ❤😍

[@Japjongetje]

That front end and underside of the hood are looking pretty good. That polytrol product really brought those plastics back to life.

[@AnonymousCaveman]

Remember when you started these videos with this car in that glorified shed. Mate you have come along way and I am so please this BMW is receiving so much love! Looks brand new at the front!!!

[@chrisb9360]

That was very satisfyig to watch this come together. Looking forward to the engine bay clean-up. Great Work!

[@kentandra14]

my SO thinks i am watching discovery channel while seeing this. not gonna lie it kinda is, but this is not boring at all! good job and i hope you upload more often!

[@sherimcgill5139]

That Polytrol did miracles!

[@nomayor1]

This is the best approach, from a project perspective. Tear down one part, do it, then move to the next part. For example then do one wheel arch, then the other, then the engine bay. And it also spreads the cost, while you maintain the car functional. What most people do is they tear down the entire car, then the whole task overwhelms then, costs start piling up, and eventually the car never gets done.

[@JMD535]

As a previous E28 owner (...1988 535is),...I must say I'm mad impressed with your efforts on this project!

[@MorganGrundy]

Just like the E28 each episode gets a little bit better. So much fun to watch. Thanks !

[@crasbee]

A little tip for the seam sealing in 11:00 and onwards: If you put down some painters tape you have no problems with smearing the seam sealer. As soon as it gets a little tacky, you can remove the tape and have perfect lines :)

[@djlawris]

also if you wish to make the seam even better, before smoothing, put a finger in a very soapy water (i am using a general dish washer). Then it is easier to even out the sealer.

[@EnriqueLopez-hb5jn]

Everytime I see you improving that BMW it is getting to look better.

[@vwfanatic2390]

I had a 1988 528e aka E28, it was the same color, too. In the US the ‘88 528e was a one year only regarding timing belt. All before and after were timing chain. I regret not having the belt changed the day I bought it. 6 weeks later, on the way to the mechanics to have it done, it snapped, bent valves, ripped one valve head off, and board a hole through the piston. Sad to say it went to the crusher. I miss that car, but I’m glad to see you making yours all happy again.

[@matthewbell1968]

Great work on the bonnet Memphis, removing the old sound insulation is a pig of a job

[@grayfool]

Looking great. Very nice. As they say, the devil is in the detail. You've certainly proved that with this job. Excellent.

[@robmain9961]

Super goof to watch you, how you rock it. Thanks for that. Reg the blind (glass) frontlights, you can fill them with COREGA TABS and water, and leave it overnight. Then empty and flush with de-mineralized water and let it dry.. They ll be clear again.

[@USSEntrprise]

if im not mistaken, the OEM anti gravel spray is a 2-k Poly urethan based "foam". they stopped useing it because of health and enviromental concerns.

[@arthurmiller9434]

@Memphis: 3M produces a label adhesive remover that is very effective in penetration and removing adhesives from any surface. I believe it’s base chemical component is a terpene derivative. It is an environmentally safe solvent used in in a variety of industrial and non-industrial applications.

[@installwebercarburetorsona6159]

Nice job, car looked pretty tired before, now it looks sharp and well cared for.

[@Reptif97]

Can't wait for the engine bay clean up!

[@michaeltutty1540]

Great job, Memphis. That looks amazing. I have used spray on rubber stone guard before, and the texture I got was very close to that factory finish. I have used on hidden areas that are subject to stone damage. I have also used it on surface areas that had been coated at the factory, such as the lower wings behind the wheel wells on a 79 Ford Thunderbird. I have also used it to create a barrier between dissimilar metals to prevent a galvanic response, such as under metal trim. For that, I outline the trim in chalk, lightly sand the area under the trim, spray that area with the stone guard. After there is a good couple of coats, I prime over the stone guard, then paint on top of that. By the time the trim is back on, the stone guard is invisible. The neat thing is that the rust stays so invisible it simply does not return. The results are almost magical. This has proven itself on my daily driver, my 607,000 km 1990 Volvo 240 DL Estate. There is zero rust under the trim after 31 of our snowy, salt-laden winters. I can't wait to see the rest of the project. I also cannot wait to get going on the restoration of my old Volvo before it goes on an 11,000 kilometer trip to visit my brother followed by a 5,200 km drive to Belize where I plan to retire.

[@rajivr5951]

"Advanced zip tie engineering" are some of the greatest words ever spoken. hahahaha

[@s.o.5975]

Hi Memphis. You can also switch the long gasket lip on the hood, it is still available and not that expensive. Well done and regards from a german E28 brother 👍

[@JMc.D]

Looks great. Perhaps later you can polish the glass on the headlights to really make it pop.

[@johnliu7893]

I am very happy to see another E28 episode. I just got one myself and will benefit a lot from your episodes. I particularly like your meticulous approach. My car’s engine bay is also dirty so I look forward to the next episode! Thank you.

[@tunizieca9373]

Burning alcohol removes glue very easy! Love the e28 🔥

[@jarrodlewis123]

This takes me back to my youth when I had a 1972 Opel GT and a 1984 Golf/Rabbit. I loved working on them both! I have also had a BMW 325. Love this channel, Memphis!

[@Markustajahoyrylaiva]

woow , Front end of that BMW looks like a milion dollar . I enjoyed that episode! thank you. ....and I just went to online shop and bought that Owatrol for my little Citroen AX

[@dame_rush]

6:10 wow, nice effect Memphis

[@ISOlatorPL]

First of all, if this antigravel product is based on PU (polyurethane) it is made for paint overspray, but first you need to apply acrilic primer for chemical enclosure, then arcilic base coat, and over all this clear varnish ;)

[@lesrogers7310]

Your E28 is a beauty, i always loved these cars and your one is very special.

[@minaelia88]

This front end completely changed the look of the car. Excellent work Memphis. Can't wait for more vids on this bmw

[@fartovyigr9446]

As known, recently removed from the tow truck a e36 Convertible going for recycling ✌🏻👍

[@TheVintageApplianceEmporium]

Best car channel on KZbin! Love your work

[@adamv242]

That hood, grille, bumper, headlight bezels look amazing. Nice work! It's always a highlight when I get a notification from your channel.

[@pepepepin4708]

Also head light glass can be cleaned inside with a little cotton to be like cristal glass. I' ve done before and it's works. You are doing a great job !!!

[@memphis5220]

Are they glued to the lenses?

[@4erbuks]

@@memphis5220 I would say yes, I had an e30 and the glass was glued, the best way I found out was to boil them. Start with cold water and let it warm up slowly until at some point the glue is soft enough just to pull the glass apart.

[@phucktusphuckti7286]

You could also pour some birdsand (really fine and dry) and shake until the foggyness dissapears. Pour the sand out and you will have them look like new👍🏻

[@pepepepin4708]

@@memphis5220 hello , you don't need move the lense, just remove the lamp and carefully clean it with little piece of cotton . Just take care with chrome around, don' t touch it. Don't use products...just a few water to remove dust and dry it when finish.

[@ironkcoony]

As long as its not the reflector that has become dull, worth a try

[@EpicNicknameFail]

So satisfying to watch you work on that beautiful car! It just pains me that you did not actually shout at your brother :(

[@o.h.w.6638]

Wow that hood looks incredible. Nicely done!

[@fernandoruifaria5417]

The front looks like new, well done 👏

[@grauerjoker]

My dear Friend, the Logo on the hood needs its blue color Back! I grew Up in a 520i Dolphin grey Last edition ;) super nice job.

[@Moe_z]

Man these videos make me want to work on my e30

[@mikenewman137]

You have done a great job, you will need another project soon

[@seanfinlay7393]

You've really brought this lovely car back to life. Excellent work!

[@maxeluy]

Awesome video as always, so much content in just one video!

[@douglasb.1203]

Amazing results with rattle cans.

[@Ammerstol]

Man, you did a cracking job on the BMW. Looks lovely :)

[@taunuslunatic404]

I'm loving this series.

[@habsom1406]

Really enjoyed this video, the editing, narration and general production quality was excellent which matches the workmanship on the E28, wow the results are amazing, it's taken several years off it. This brings back memories of when I did exactly all of this on my 525e about 20 years ago. Everything is logical and straight forward to rejuvenate and comes up great. Very systematic approach by Memphis. That engine sounded very sweet and healthy as he pulled the car out. Really looking forward to the engine bay detailing and the timing belt, camshaft and crankshaft end seal replacement episode.

[@MrSkoda105s]

Top gedaan kerel! Hier is de BMW echt flink van opgeknapt! 👌🏻

[@TimBeta36]

Geweldige metamorfose. Zéér mooi werk!

[@80sAudiSport]

Yes. Polytrol works really good, saved my CL bumpers w/chrome stripes. Might need an additional go, but held up quite well for months now!

[@trippy_boxer_dog2170]

amazing! you are so talented mate! looking forward to the next video of the engine bay clean up!

[@paulpateman6723]

Love the E28 build Memphis you are amazing you should be proud of your achievements 🏴󠁧󠁢󠁥󠁮󠁧󠁿👍🇬🇧👍

[@joelpalmer]

Great work and outstanding results. On chrome you can use 0000 steel wool with polish for faster and better result. Keep going you have a great car!

[@paulschmolke188]

Great end result! Car looks almost new on camera. I appreciate the demo on the plastic rejuvenator, the only thing like it I’ve ever used is Armor-all. I’ll bet it’s fun to drive too. I’ve driven one myself and really enjoyed it; New car, dealer to dealer exchange at night. A worthwhile project car. 👍🏽👍🏽 I’ll be interested to see it with a cleaned up engine bay when you have time to do it.

[@Zuulus78]

Use WD40 or regular Oil to remove Old adhesive. Again super Nice bmw

[@FrankParkin]

Crazy skills. Great video. Chillies out viewing. Thank you.

[@markmcmichael5595]

Very good idea with the bumper stud well done

[@kris856]

Thanks for your advice about polytrol- never heard of that before and after watching you I have just ordered a can. You definitely deserv some commision from them🤓

[@justinlawrence4562]

Looking forward to seeing further work on the e28

[@jjrestomods]

Love to see you working on the e28! Your work improved the car noticeably! It looks awesome

[@ACDC1998Zippo]

10:00 For rattle can jobs, i really like the MIPA Winner stuff. It is really cheap but performs very well.

[@ohcrapwhatsnext]

Great work as usual....Looks great... Yeah, the Polytrol looks great...

[@TC-xo8ub]

Probeer eens je v riem iets losser te zetten, bij mij was toen dat hoge geluid weg dat de motor maakt. Goed bezig kerel front end ziet er weer super uit!

[@CarFul]

Weer een mooie video “on the Beamer saga”. Knap gedaan … ziet er weer nieuw uit . Success !👍😀

[@MiracleMitch]

Goedenavond! Great follow up to the initial 'tear down and prep' video. I have 3 cars to repair and this gives me the impetus to get them done. Awesome results on the E28 and I would be extremely pleased if my repairs look half as good. Keep the videos coming and I look forward to sharing the 100k subscribers achievement with you soon!

[@paulmackay6376]

Excellent video and great work. You are a gifted young man. Keep up the great content.

[@markharris7662]

Looks so much better really cleaned the front up. Looking forward to seeing the engine bay refresh.

[@power56garage]

Perfect job again ! I'm very happy when see new video is uploaded here! Just one notice from me, for the front end of the cars use a real paint (compresor and spray gun means, because i saw you can use it ! ) because the front of the cars accepts damage from the road and the paint from spray is a lot weak , i made the same thing and after one drive on the highway i realize my mistake :) Best regards !

[@jotareye1838]

3m rubber wheel is great for removing adhesive

[@chrislewis2510]

Looks awesome! Keep up the great content!

[@FixedByDuncan]

Fantastic job 👍🏻 You got that car eating beast under control and made the 520 look damn near perfect. Need to give that polytrol a try, the trim on my V40 is grey instead of the black it's meant to be.

[@kevinfisher1632]

A B.M.W, a product of beauty.

[@andymille]

Really great work, it looks nearly brand new 👍👍👍

[@Dravito94]

Always nice to see that someone is giving a second life to these classic BMW's, great job! :)

[@Johnathan_Waters]

You did a fantastic job! I am also a German auto mechanic by trade, and I think you nailed it. The only thing I noticed that you could have done was clean the inside of the headlamp lenses.

[@martinwyke]

Well done, cracking looking result

[@MrHuismeester]

Mooie resultaat !! De voorzijde van je BMW ziet weer als nieuw uit ! Je kan ook zien dat je het werk goed wil doen en je echt wel veel moeite doet om het allemaal er weer perfect eruit te laten zien. En het eindresultaat mag er zeker wezen !!! Weer genoten van je video met je heldere uitleg van hoe wat en waarom je sommige dingen doet. Is ook het mooiste en een restauratie, het weer opbouwen van alle componenten en de auto onder je handen te zien groeien ! Veel succes met de verdere aanpak kan ik je wensen en graag tot de volgende episode !

[@ateliertalonpointe]

Excellent job 🔥

[@RdzNerz]

Looking absolutely sick man! Can’t wait for more!

[@pouyan225]

Love this channel. Memphis is da man!

[@Astra8676]

Great Job!!!!

[@MrCarlyMS]

Great job!

[@langelihlemnqobindlela8670]

Solid stuff man!!

[@Drizllemanizzle]

Clean bro 🔥

[@MLC...]

Nice job!

[@spyder2001]

Thank you. Polytrol looks like an awesome trim restorer. You do great work mate - keep it up!! A lot more work than planned but its a fantastic result.

[@TheNorthernmunky]

Brilliant as always

[@michaelhynds8035]

Top class results. Well done.

[@GeorgeEI7KO]

Savage work man!

[@JF-4444]

Nice work!

[@robertjordan9075]

Nice work 👌🏾