I had uploaded the previous version of firmware and updated my remote by connecting it to the phantom. After that, I could not get my remote to work properly. I kept getting a message that the software quit working. After searching to resolve this problem, This worked very well. I executed each step, positing the stream and restarting it as necessary, until I was back up and running. Thank you.
@DutchDigitalDude7 жыл бұрын
Melissa Edmonds Awesome, thank you for your comment. Greetings from Holland
@MultiJohnish7 жыл бұрын
Many thanks DDD, most helpful. I followed along and got the job done. Without your help I would never have got there. Great vid.
@DutchDigitalDude7 жыл бұрын
MultiJohnish thanks. Fly safe
@helpaholic2 ай бұрын
Why did you not say right in the beginning that you update the drone first ?????? FIRST RIGHT OFF THE BAT
@helpaholic2 ай бұрын
Is it still working at this time because I just tried to go on yesterday and I can’t get my safe flight List so that I can validate that I’m allowed to fly there did you get yours working and if you did.
@helpaholic2 ай бұрын
You are to slow speed it up And when there’s something important like that, like what has to be done first speak up early and don’t take forever
@HDking55Norway7 жыл бұрын
Hi. Good territorial. Did you forgot the battery update? Wondering, why you found update firmware by cable to Quad better, else to sue SD card? Did you test bird after update? Seems to be some RTH problems, as I can read at forums, but you are lucky?Hope you update was success :)
@DutchDigitalDude7 жыл бұрын
HDking55Norway at the time I did the update there was no bin file for the quad. With the assistant was the only way to do it. The remote bin for sd card was yet available. I had no trouble it flew like a hummingbird after the update. But today the quad is send back to dji. There is a problem with the camera. Still its a good bird, but there are many problems to solve.
@bkrull19883 жыл бұрын
Thanks so much for your help.
@DutchDigitalDude3 жыл бұрын
your welcome
@brunopezaum22 жыл бұрын
how to unzip on bin code ? I unzip but, the remote controller dont read the archive.
@marcelwittling46045 жыл бұрын
Great tutorial but I cant install on the remote, when the reboot starts, it instantly Shows me an error. Help plllllls :(
@jonathanm89956 жыл бұрын
I'm Nanojib from Indonesian,, P4pro+ owner,,I want to know what's Dji go 4 version,,rc firmwire and Air firmwire, You use know,,I have troble with OSD and HDMI resolution still on 720,,MayBee You can help me,,,thx
@dariuszdorman19147 жыл бұрын
After new controller updade in my phantom 4 pro + its impossible to reboot system using top button in build in screen. Can you check if you have the same issue with your controller after newest update ? Button works when you in home screen but when you in "go fly" screen its impossible to reboot. You need to land and reboot whole controler and I am not the only one having this problem.
@DutchDigitalDude7 жыл бұрын
Dariusz Dorman thats normal you have to stay on the desktop of the screen . To reach this button, only switch on the quad, so you are connected. Not go in flymode.
@harmbakker66265 жыл бұрын
Hallo DDD hoe kan ik de video beeld dat normaal naar de drone gaat instellen dat het wordt opgeslagen op de controller
@DutchDigitalDude5 жыл бұрын
de ph4 pro plus werkt via de app van dji als je video cache aanzet in de app worden je filmpjes en op de sd card en in de editor van de app opgeslagen
@lasersbee7 жыл бұрын
Falling asleep between your sentences.... Snorrrrrrrre