First 3-Rider Test Drive of our 3 Engine Mini Bike! 636cc of FURY!

Our limousine mini bike handles very strangely with three riders on it! In today's episode of our 3 seater 3 engine mini bike build, we fabricate and install chain guards, add handlebars, and most importantly, install our brakes! We then all ride the 3 seater mini bike together for the first time. This 3X Tillotson 212 powered bike has a ton of power, and it handles very weirdly!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----------------Go Power Sports Parts Used in Today’s Video---------------
Tell them CarsandCameras sent you at checkout:
Tillotson 212: bit.ly/2Y8DFU6
Mini bike seats: bit.ly/3dFQQmA
Handlebars: bit.ly/3KEzx6J
Dual sprocket clutch: bit.ly/3fS6q1t
MB200 wheels tires: call for availability
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirs...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-camera...
Equipment we use: www.amazon.com...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.

[@CarsandCameras]

Sketchiest ride of my life! "Full send" episode coming soon!

[@nc_g8gt]

dad

[@unclesamuel2076]

The sketch is what makes it more fun!

[@philvictor5537]

Make a tuk tuk. It’s a tri cycle but 2 seater on the back.

[@philvictor5537]

O. And you could use the rear end from the wrecked Miata or the k truck. And a old Chevy bench seat.

[@FastLaneLyfe]

Needs a nitrous system on it!

[@jatdb51t]

Charles, man you are out of control. You about killed me in that scene where you were sitting backwards on the mini bike doing the patty cake motion.

[@Hitycooking]

kzbin.info/www/bejne/rJelkKV_o9mJodE

[@CDXLIV444]

He cracks me up too. All of them are some real characters.

[@scottcol23]

That thing would be perfect for putting around swap meets, campgrounds, or anywhere you want to avoid long distance walking with 2 or three people. Id make a little trailer for it too.

[@austinweiers1461]

Each guy should get a beer cooler side car beside them

[@onlygaming69]

@@austinweiers1461 lmao you just want a 3 seater quad bike with room for beer 😂😂

[@btmnwhitworth6753]

Beer trailer?🤔🤘

[@jerrybigrig9475]

If there's a next time ..( I'm sure there will be ) that your using long bolts to bolt stuff together ..the handle bars ..put a piece of pipe in piece ..3/8" pipe same length as inside of box tubing ..that way you'll get you through bolt to tighten ..without squashing your box tube .. Cool project ..👍😎😉

[@tjnucnuc]

Perfect idea. Better transfer of torque.

[@PopllFixit]

... Or just use shorter bolts that only attach to the top layer of the tube. Do the bolts really have to go right through the tube?

[@jif.6821]

Larry, Moe, and Curly would have LOVED this bike! 😜🙄😲

[@draggonhedd]

If you use BMX handlebars with the padded crossbar, they can double as backrests for the seats You sholud also paint a line on each of the clutches so its easier to see if they're spinning from a distance

[@larrydavidson3402]

You three just have to darn much fun with your builds. I get lots of laughs from your videos. You three have great chemistry.

[@jameswarren423]

The crazier the better and this one is crazy just love it ! you guys are awesome! Can’t wait to see you all three in a hot lap ! great video and great build👍🏼🤩

[@tkskagen]

HELLS YEAH! I love ALL of my "CAR'S AND CAMERA'S" episodes. You never know what is going to happen...

[@Todd_G_FPV]

Word

[@grdray2138]

Cruzin' with Moe, Larry and Curly. Awesome. All you need is wings on that bike.

[@jeffrykopis5468]

Today I picked up 5 old generators, all with OHV Briggs or Honda engines, and most of em turn over. Tapered shafts, but they could be machined down. I also picked up the remains of two quads! Super junky, but the rear axles will make a great axle and jackshaft for my super jenky FRONT ENGINE go cart. And they have disc brakes too! Free stuff is good.

[@xxvikingwarrior]

Dude Charles is the best thing to happen to this channel!

[@mikemc7704]

Charles what you were trying to say is bolts and nuts are regulated. Its called SAE - The lines on the head of the bolts indicate were the bolts can be used and the torque spec on the bolt

[@tkskagen]

It would be nice that if one Engine "STALLS", the compression would bring it back, rather than having to pull rhe Recoil Handle! Maybe have a panel in the middle with LED's to indicate all engines are running, and when a light goes out, y'all know which one needs to be restarted... 🤔

[@Darth_RevRen]

Great idea. It would be nice if all the engine also had an electric start with a push button to start them. So if one goes out you can just push the button to restart it.

[@Ty-bz7zx]

Good use of Oblongular tubing gentlemen!

[@Mike-dr5vc]

This is awesome!! Love the content! So funny to see that thing rolling with all three of y’all on it.

[@Hitycooking]

kzbin.info/www/bejne/rJelkKV_o9mJodGV

[@pollyg562]

if you get footage of going through a drive-through or just past a crowd its got to go viral the ops are unlimited, i really think this build can get that sub count going

[@mikemorse7991]

Dudes, I've been watching yaw since the beginning and I love yaws videos. I have to say bringing Charles into the Cars and Camara crew was an awesome idea! I love the humor he brings to the show. God bless you guys and keep em coming! tTt

[@bonecrushercurtis6949]

Wooo, nice 3 seater bike, You think the back two riders would really need a bike handle bars ? What about just a hoop hand rail style , hang on bar ? ?

[@loganwightman1325]

3-into-1 exhaust sound awesome, also would keep the heat from the exhaust from blasting the next engine's fuel tank

[@robbsheff5410]

Would be interesting because the engine's cranks aren't in sinc with each other

[@meade4573]

@@robbsheff5410 True but when the clutches lock up at speed they'll be spinning at the same speed but the cranks will be in different positions opposed to one another every time the clutches look up. So every time you get up to speed it should sound a bit different.

[@Knee-ko]

Love seeing glimpses of old C&C projects in the background (e.g. engine-less drift trike). A nostalgia tour of your storage racks might be in order pretty soon. 🙏🙏👍👍

[@soupsoundsstudios5220]

charles is funny and a superb addition to your channel

[@chrisjohnson131]

Cars and cameras is like a box of chocolates, you never know what you're gonna get.

[@javman03]

That was super nice of 'Thing' from Adam's Family to hold that brake cable for your demonstration of how you were going to make the extension!

[@dustymiller7758]

Great vid guys, really cheered me up after a bad day.

[@BigBlueMotors]

The Pit Boys - Manny, Moe and Jack!!! Almost as funny as the old picture of two heavy dudes riding Honda Trail 50's 👍

[@twocvbloke]

With the chain popping off, I guess Charles is the whipping boy there... :P

[@spyder7758]

You should all take hot laps alternating positions each time This thing seems like so much fun :]

[@ackelvis6976]

This is a genius idea, please make this happen.

[@loscheninmotion9920]

YES

[@tommypryor8067]

This channel has jumped the shark.

[@kane2103]

You guys GOTTA load that up and take it into town. Would love to see people's faces as you 3 cruise by on it !

[@mattmotors1662]

Tying all 3 exhausts together into one straight pipe would be so freaking cool. Love the videos as always. Keep up the good work guys!

[@jasonkeplinger2835]

Couple of things. The chain guards between the engines, if they're solid mounted you might bust a engine case if there is much frame flex. The passenger handle bars can use short bolts and just bolt to the top of the tube if you're welding the tube to the frame anyway, also keep it from quashing the tube. Rear chain might need to be larger (run down to a jack shaft and run 520 chain maybe?) since you have that much HP going through it and weight to push down the trail

[@ayyron69]

On the chain guards, you could cut out the inside wall of the square tube so it can just slip over

[@pauls.5815]

You could attach some angle iron to the square tube as a guard for the bottom of the chain to keep your feet safe.

[@ronniemaeker9102]

Gonna need some "Rubber Baby Buggy Bumpers" for the square tubing to engine mounts...

[@Herbybandit]

The three stooges ride again! 😂 I think you've over thought those handlebars, I bet your all trying to steer at the same time? You might have been better off with onset and the passengers had a loop between their legs to hang on to. How much slop is there in the final drive chain? It might be an idea to build in some flex room and add a tensioner also do away with the quick link they are a weak point.

[@stanlucas665]

Awesome build guys. I have an idea for your next project. A barstool racer with a stage 1 Tillotson for power

[@UKMitchy]

I would get high tensile bolts for those handlebar clamps. Don't want someone getting hurt . Maybe weld captive nuts under the upper of those blocks.

[@spencerking1164]

I would call it triple threat😂😂 love the vids guys.

[@lizzard7473]

The sight of three grown men on a mini bike that has 3 motors kills me🤣 This one is hilarious.

[@jonathancrissinger2301]

I love watching you guys, but ya'll are crazy, hahahaha. I can tell that hanging out with all of you would be a great time. Keep the projects coming. It reminds me of my childhood.

[@1one3_Racing]

Why not bend up a tin chain guard that covers the whole chains and the clutches? You can fit the chains then bolt it on over the top

[@musicauthority7828]

John saying I'm scared says it all.

[@delwhylie4748]

A word from the wise to you master fabercaters since you would never figure out you can simply use well greased blocks of oak wood from pallets. For really great chain guides and supports the various shapes and sizes of lumber from wood pallets of oak make the best chain guides and tensioners possible. Wood chain tensioners were used on dozens of farming applications oak and hickory were the most common. As a young mechanic 50 years ago we had to make do with what was available to keep the wheels turning and some of the best technics of yesterday are still the best today. You can start with grinding a groove in a proper placed and greased piece of oak of almost any length then after a short time the chain cuts a perfect groove for the rollers on the chain to run in. After that its simply a matter of keeping the chain oiled properly. This also can keep longer chains from whipping jumping off and causing the destruction of the sprockets and clutches. This is a simple trick I used before you all were born. Try it out you may learn something useful. I see the constant damage and lose of chains on your videos just thought to let you know there is a better way and the oak wood is prevalent and cheap. One pallet can make potentially a few dozen tensioners and also can be used for chain guards with a little imagination. Hope you give it a try can't possibly make you look any dumber.

[@N1RKW]

Back in my riding days, I used to tell my passengers that they shouldn't lean but rather just stay straight up relative to the bike. That way I could control the whole thing myself because their weight wasn't moving around much. They became part of the bike, as far as I was concerned. This seemed to work best with a single passenger. I never rode with two.

[@rugbyguitargod]

Yea, but having them do that can put them at a much higher risk of falling off of the motorcycle, especially if the driver has to make a quick maneuver to evade an accident. If the passenger is trying to keep themselves upright during a maneuver like that, it's very likely they would not be able to shift their weight quickly enough to compensate and could cause them to fall off the bike, and would make it harder for the driver to maneuver the bike quickly and safely. The force of the passenger balancing themselves would effectively cause the bike to react much more slowly as their weight shift is opposite of the direction and weight of the driver & bike itself as it rotates on its axis. TL;DR: its much safer to have a passenger keep their body weight/position more or less identical with you & the bike.

[@N1RKW]

@@rugbyguitargod - It seems that we are talking about the same thing here. My intention was to state that the passengers should stay upright relative to the bike, not relative to the Earth. That way their weight effectively becomes part of the bike and the rider can more predictably control it. If the passengers are moving around relative to the bike, it can cause all kinds of problems controlling the bike, which is precisely how I learned to tell them to sit straight up (relative to the frame of the bike) no matter which way I might be leaning.

[@rugbyguitargod]

@@N1RKW oooohhhh! Ok yea 10-4 good buddy lol

[@N1RKW]

@@rugbyguitargod - Have a great day!

[@rugbyguitargod]

@@N1RKW thanks! You too! 🤙🏻

[@rimfire2642]

Larry Moe and Curly! John is Moe, Ike is Curly (or Shemp... I say Curly) and Charles of course is Larry...cause he's Larry!

[@Captain_Yodelstein]

LOL...the thumbnail got me.

[@jeeper426]

just another day at "it'll be fine labs", this thing is so sketch but awesome at the same time, y'all prove that the best way to do Research and Development falls under; build it, send it, bend it, mend it, cycle and repeat, this thing is going to be a real beast when all the gremlins are chased out and its tuned and ready to roll fully as a completed project, but as y'all have said "Custom builds create Custom problems", but y'all are working through them as they pop up, stay safe guys

[@Hitycooking]

kzbin.info/www/bejne/rJelkKV_o9mJodE

[@its_e123]

Been watching yall since day 1!!! It must feel good to be able to call it a facility!!!

[@G-FORCEEE]

It was the bunny that broke the chain. Ike was trying to get away from the bunny 🤣🤣🤣

[@jamesmcgee9279]

Charles is hilarious! By the way, why is the rear tire smaller than the front? Great video guys!

[@Jt-ut6po]

I build mini bikes for a living at coleman. it's dope, once management gets everything situated it'll be way better.

[@patthesoundguy]

You need to name that bike "Cool Runnings" because seeing you guys ride that it reminds me of the bobsled team in that movie 😀

[@tstricklin4808]

Excellent reference, know what ima watching after dinner 😅✌️

[@Avetho]

In that case, get rid of the clutches and just push start the thing with a master ignition switch for the driver, the back two push and hop on XD

[@patthesoundguy]

@@Avetho that would make it so fun 😁

[@ancientfilm]

Thought the same thing first vid, such a flashback to my childhood 😂

[@scottcol23]

@@tstricklin4808 Classic John candy! Great movie. I could watch it again also.

[@metalmaniac9513]

The crazy mad scientist builds are the best

[@matthewprovost9879]

@CarsandCameras You need to have a jack shaft between each engine to link them together 1:1 gearing with the final engine doing the conversion. You're welcome. We did this multiple engine stup when i was in 7th grade(pre 2k) My uncle was the tech ed teacher. He taught me a lot about load transferring and this will be your easiest way to get this done

[@stellacatfish]

Triple Trouble is looking good !!!

[@doughboy9999]

I do love y'all's mini bikes n go carts

[@jester-gq9jq]

So much fun, moe , Larry and curly

[@eugenesbackyardrepair4593]

I thought you had hook up with Go Power Sports. The CT line of mini bike has front chain guard that go over clutch and covers most of the chain top and bottom.. No pants getting caught in clutch that way

[@crowofjudgement159]

You guys should do a sidecar with another engine! It would be so much more stable.

[@bradley3549]

You've never driven a motorcycle with a sidecar, have you? :D

[@bonzogamer6966]

Sidecar each side.

[@bradley3549]

@@bonzogamer6966 Now we're talking.

[@Ratkill9000]

@@bonzogamer6966 just do the Dethklok motorcycle and multi sidecar!

[@deandwx]

Looks fun !! Only thing missing is a 3ft sissy bar 😎

[@kenengelbrecht9872]

Cut a groove in the head of the carriage bolt and then use a standard screwdriver to hold it while putting a nut on the bottom. Will keep a smooth surface on top that way.

[@mocarpenter8836]

It's the Not so Jamaican Bobsled team !! 😂😂🤣🤣

[@jacobbreazeale1816]

The things y'all come up with 😂 I love it!!

[@danclement8858]

At 2:08 where did you find that chicken foot helping hand? Thing is sick!

[@onekick]

This was the most funniest thing I've ever seen yall do!! 🤣 reminds me of the three Stooges!!

[@VinzClorthokeymasterofGozer]

You need to slap and poke each other and yell, "nyuk, nyuk, nyuk" the whole ride.

[@reddog543211]

Awsome video guy's....it'll be fine...once you debug it

[@TheDhylton1]

In your shop you have a Razor mx650 electric dirt bike. There are massive upgrades to the suspension, battery, and motor that can make it run 40+mph. There are even head and tail lights, horn, turn signal, and brake light options. Would love to see y’all mod that thing out. Love your content!

[@CeesBevers]

Very cool

[@DaxtonAnderson]

I can't wait to see Junkyard Mook screaming her face off laughing on the back of that thing at the next get together 😂

[@Hitycooking]

kzbin.info/www/bejne/rJelkKV_o9mJodE

[@coryrowe2691]

Instead of the square tube use the rectangular tube and cut a side out and make a one piece chain guard for each engine

[@stevenmills3]

That’s funny shit!! Could not stop laughing! What ever you do don’t add another guy to the team, because a four person mini bike would give me a heart attack 😂

[@AmericanGummyBear]

So damn awesome! Ducati has the 636 Monster. Can we name the bike the "Pucati 636 Tri-Monster". Thats a beast and looks like its scary fun..

[@nutroll4205]

It’s the flux core welder that failed on those bolts. Great video !

[@mitch_lifeoregondayz2449]

Might look into how full suspension mountain bike chains work, just add that to your guides should fix the problem

[@jjhack3r]

John: Alcohol Ike: weed Charles: everything else...

[@pollyg562]

ive had some disappointing Mon and Wed waiting for this BUT its here and i like it

[@danf4616]

Hey Moe! Hey Larry! Nyuck Nyuck Nyuck... Just kidding! Great project! 😁😎

[@bradleyberdahl6148]

YOU GUYS LET CAPTAIN CHAOS(a.k.a. Ike ) DRIVE????? brave.....very brave!

[@nolon88]

You guys need to make a show mini bike! Like custom chassis design, fancy paint, flashy rims and maybe even like a mini airlift system!! You guys have so many performance/dirt orientated bikes/karts, you should switch it up a bit!

[@Jako8557]

Three sets of 'ape hanger' handle bars would look very funny, Then take it to a mini bike show....

[@jimgarra7024]

I wish y'all had an insta360 camera for your shenanigans. Would be amazing content.

[@dadsshenanigans9632]

Really need to cover the bmw, it’s in the splash zone of everything really cool build

[@USN_Ret-]

Chain guides would help a lot.

[@Kownterfiet1997]

poor kei truck cant wait to see what you guys do with it next

[@Spodeboy]

It's the 3 stooges bike! I can hear Curly say whoop whoop whoop!

[@chrisduda1974rr]

Get chrome "acron" nuts for the carriage bolts on the handle bars after you cut the threads off.

[@videobyallen]

Yall should put a set of longhorns on the front of it!

[@buckpotter3184]

This is your boy BUCK Potter I Ken see that thing lifted Up with some Mega mud tires On it

[@timlittlejohn6192]

Nice hand sticking under the bike to hold the brake cable. 🤟

[@markkennedy4055]

Have you guys ever thought of building a Mini Rock bouncer, down scale version with a Four-cylinder engine.... That would be cool.

[@levisylvester]

how about cutting the bottom of the square tubing open to you can just slide it on? then you could make it even bigger to cover both chains! nice build man!

[@inmyopinion6836]

OR, a 2"X4" C channel about 4 feet long and cover it ALL

[@Hitycooking]

Nice work brother

[@spagamoto]

Could consider putting a removable curtain bolted to the upper chain guards to protect the legs from the lower chain path.

[@ianpotts4276]

Keep up the good work

[@Tp-vv7vi]

If the guy in front farts" I feel bad for the co-pilots behind him!! lol 😆 🤣

[@donaldhalls2189]

Anything you want for safety needs high tensile bolt's more than 7 peice of tube through the handle bar risers all the best to you all

[@leosweeney7955]

Should have left the carriage top on the bolts, it would have set itself into the soft aluminum handlebar strap.

[@jcardwell3rd]

Make one large backing plate the ties all three motors together using the bolts for torque converter backing plates and use that as a place to mount your guards and tensioners.