First Start! × 4BT Cummins Discovery #35 [Land Rover Build]

Finally starting my Cummins Land Rover Discovery project! Sounds so great at only half boost so far & 4,000 rpm!
~ PART#35 in a project dubbed "Nanuuq" to swap out my lifted Land Rover Discovery 2's blown 4.0L V8 & boring ZF auto for a Cummins 4BT 3.9L turbo (Holset Super HX30W) diesel 4-cylinder engine (Bosch P7100 pump) with an NV4500 5-speed manual transmission. The AWD 4x4 will remain with the LT230 transfer case divorced behind it all, & plenty of Dodge 6BT parts too. Another big phase of my custom DIY build to create a do-just-about-anything off-road / overland rig. Did I mention it's a camper too?
~ BUILD THREAD: (Entire build) hwww.overlandbound.com/forums/...
~ BUILD THREAD: (4BT specific) www.4btswaps.com/threads/100657/
~ DISCLAIMER: Please do not do/repeat/imitate/recreate anything I do in my videos. JUST DON'T! It can be very harmful to bystanders, your person, your wallet, & your psyche. Don't risk the only "meat vehicle" you get!

[@Tinker1837]

*Skip to the start-up? [Click here > **15:39**]* _NOTE: I'm swapping the Valvoline for Redline MT85 due to a mixup with trans suppliers recommendations. Because as it turns out that SynPower stuff is "iffy" for the NV4500, but the Redline oil's on point with New Venture's (the trans manufacturer) specifications_ 👍

[@lsjones42]

Tinker man this thing is fabulous, it makes me miss my disco

[@MatsuYoda]

Hell No!

[@Tinker1837]

@Abel Harbour Those tires are wicked! Not sure if they have them in 16.5" to fit my military beadlocks... but 37's are definitely coming!

[@Tinker1837]

@@lsjones42 It's finally coming together!

[@Steve-jy1vd]

Skip the start? Are you insane?!? All the good stuff in the beginning. Congratulations on getting it running. So excited for the next video

[@atoieno]

IT had to happen but nothing is ever guaranteed. I've had the pleasure of hearing a 6.3 V8 GMC diesel in a 110 Land Rover and a 3.5 litre 4BTD Isuzu in a classic Range Rover as well. So well done sir! Now show us how to close the lid...looking forward to that bit as well as when you use it in anger.

[@Tinker1837]

Thanks! Just as excited at the prospect of that too :)

[@tommywvk]

I love that DeBoss garage shirt you have! Congrats!

[@Tinker1837]

The original 4BT swappers on KZbin! (I have no idea if that's true, but they motivated me to make it happen)

[@jasonrockley1054]

The smiles and grins on your face says it all well done

[@Tinker1837]

Thanks, & it was a long time coming. Better part of 2 years now, woo!

[@roverron7509]

Rebirth. Awesome job.🍻

[@Tinker1837]

Thanks! So happy :D

[@faroukwasswa3588]

You don't know how much i v waited for this moment, my heart raced like it was gonna come right out, I love the turbo sound and the engine sound so full of life, I envy you man!

[@Tinker1837]

I'm so pumped it's alive!

[@sticktalk5450]

Dam man congratulations finally running

[@Tinker1837]

Finally for sure, so happy!

[@burtcokain2702]

Rocking the Deboss Garage shirt, nice. His channel brought me to yours a couple months ago. Will eventually be swapping my 6bt into something soon hopefully. Keep up the good work my friend. 👌

[@Tinker1837]

Their channel & a few friends were the motivation to stop taking about the idea & get after it! Those 6BT's are badass, so smooth for a mountain of torque 💪

[@benbowers8670]

Now that’s what I’m torquing about...! That engine sounds great and revs really well. I feel sorry for the drive shaft joints when you put all that torque through them. 😆 I cannot wait to see it drive... Well done to you👍🏻

[@Tinker1837]

So happy with how it sounds & revs!

[@benbowers8670]

That is one torquey motor.

[@DakotaWoodHD]

I've recently found your channel, man I love your work. I'm learning a lot from your videos which helps me with my builds.

[@Tinker1837]

Thanks! I try & find a balance between useful information & something interesting enough to watch haha

[@donnkelley6823]

CLEAN so far.... I would clearance that pan, and use an Allen type plug. Flush fitting, would go well with how clean you've done this build. Amazing work dude!!!!!!

[@Tinker1837]

Thanks! I'll end up doing something with it for sure, maybe build one with a notch & some baffles to be ready for the first oil change to swap in there.

[@nathansearle6839]

Turned out so awesome! I’m excited to see the wild adventures with the disco. Amazing work!

[@Tinker1837]

Thanks! Going to be so much fun but having to stress over an ailing engine.

[@trusso2614]

6:53...bless you bud...pretty good size sneeze there

[@Tinker1837]

I hope I'm not allergic to diesel fuel... I could see the cops getting called a lot if I'm at the pumps wearing a big hazmat suit haha!

[@trusso2614]

Lol!!! No I believe diesel fuel was and still is used for medicinal purposes. Theres no way you can be allergic to it! Congrats on the fire up man, sounds sweet- I want to do my 97 wanger(haha!) Just having trouble tracking down an engine. Sadley I havent seen all your vids, i stumbled into it recently. Gotta say theyre fun as heck to watch, lots of good ideas and work done... Did you rebuild an engine or buy it new? Looks so sexy in there

[@Tinker1837]

@@trusso2614 They're getting hard to find for less than a kidney on the black market! I rebuilt mine that came from a drilling mud pump & I think a stepvan before that. It doesn't look at that great close up... surprise subzero temps caught me off guard while I was painting it. So it's a bit messed up on the block, but oh well it can't stay pretty for long with what I'll be doing with it.

[@trusso2614]

@@Tinker1837 thats why we get 2 of everything...2 lungs, 2 kidneys, 2 ba-...no wait we need to keep those... Its to trade for a 4bt!! Paint can always be fixed, but the quality of install is where its at...again good job man, I'm on the hunt now, after watching it fire...any thoughts on an Isuzu 4cyl diesel Out of a cab over truck?

[@Tinker1837]

You gotta do what you gotta do haha! I think I'll need those to drive this thing here soon 😮 I don't know a ton about them but the guys on the 4BT swap forums seem to swear by those 4BD1T & 4BD2T as an alternative.

[@HAUNTS360]

Wish I had the talent you have for this. I have a 2002 and 2003 Disco and the gas engine in them are problematic. Looking forward to seeing this beast off road.

[@Tinker1837]

Doing my best to keep one of them on the road! Makes me sad to see so many sent to the crusher from engine issues :(

[@gafrers]

Wonderful. Funny, entertaining but as usual the attention to detail is so high. I had no doubt it would start and sound awesome. Congratulations

[@Tinker1837]

Thanks! I had my concerns until we realized how flat the batteries were... oops!

[@Seiskasatku]

Oh man thats what im talking about , sounds like a tractor and it sounds good for me!! Greeting from Finland! Love your work!❤️

[@Tinker1837]

Same, really like the sound! The spool sounds & that low end grunt is great 🤯 Thanks!

[@Seiskasatku]

Tinker Yeah nothing better than a Cummins sound! Very good job in this build! Videos are great : No extra shit talking and little things like throwing caps and scissoring metal makes these videos very entertaining and funny! Sorry if my english is bad 😁

[@Tinker1837]

Your English is good! I try to balance the information with things to keep it worth watching :)

[@HAUNTS360]

That's so Awesome! Congratulations on a job well done.

[@Tinker1837]

Thanks, it's been a long but fun build :D

[@Jm-zn4ii]

I love the effort you put in to the video and the vehicle, its inspiring.

[@Tinker1837]

I hope to keep it going, no shortage of other ideas for just this project!

[@QuantumAlchemyst]

Good job man! We're expecting for a firts tests on road, off road... 👍🏻👏🏻👏🏻👏🏻

[@Tinker1837]

Oh yes! Plenty more videos to come!

[@somekidzenvy]

I watched every video in this series without fast forwarding once. Awesome that it’s running!

[@Tinker1837]

Couldn't be happier! Well... until I get behind the wheel again :D

[@dishsoap1]

Sounds awesome. All that hard work you put in is paying off. Can’t wait for the total completion and some videos on the trails.

[@Tinker1837]

Very much looking forward to getting behind the wheel again!

[@cosp_ride3095]

Incredible work on this whole build, Seriously! There's a right way and a wrong way to do everything, and you've done it all right. Spectacular build, I hope it takes you to fun times and cool places. Cheers mate

[@Tinker1837]

Thanks! Going to be so fun to get behind the wheel again!

[@jasonvenegas8264]

Wooo woooo. that feeling is priceless

[@Tinker1837]

Sure is! Big moment in the build.

[@josedurazo5635]

I've been watching many build up and first start videos. That commitment on checking all is preoiled/primed shows you all are focused on best handwork and engine care.

[@Tinker1837]

May be a bit of "overkill" in some people's eyes, but for me it's well worth a little time aside to protect the investment 👍

[@josedurazo5635]

btw, that's a hell of deep and smooth sound. Recommend watching this with headphones or HQ speakers. ❤️

[@Tinker1837]

You should hear it in person, it's glorious haha! And it can hardly build any boost without a load, so when that turbo actually lights up it may sound even better :o

[@Twankiejones]

Super happy to see this thing running finally, ready to see it on the road

[@Tinker1837]

Same here on both!

[@RobertLowery]

I only regret that I have but one like to give for this video. That is awesome. I am going to have to watch again on a bigger screen. Thanks for bringing us along on this project. Looking forward to seeing you finish and get to drive it for the first time.

[@Tinker1837]

Getting back behind the wheel after all this time is going to be so great :D

[@lostaoulscustomz777]

So happy for you !!! I've been following this build since the beginning you've done a wonderful job !! An inspiration to the diesel 4x4 comunity !!

[@Tinker1837]

So pumped! Thanks & many more mods to come 👍

[@TheCanadianBubba]

Congrats on the first flash ! Now we want a roadtest ! Nice shirt at 14:50 ! hopefully Rich says hello.

[@Tinker1837]

Thanks! Those guys played a big part in motivating me to get to this point 🤘

[@s.l.r.z.r.1810]

Nice work man

[@Tinker1837]

Thanks!

[@scarface-39]

Alright man!!! Sounds cool, can’t wait till first drive!

[@Tinker1837]

Even better than I hoped for! I'm already tearing thru my list of things it needs to roll out 👍

[@Bread996]

The greatest moment in a build. Thanks for that!

[@Tinker1837]

For sure! Long time coming!

[@rodneycassidy6037]

Some people never experience this much joy finnaly seeing some of the the payoff from all that hard work.

[@Tinker1837]

It's been too long since I've had that payoff from a big project, fulfilling for sure!

[@michaelarchangelthehammer]

Nicely done!, Very clean, love it...like the squirrel voices too.....now it's my turn to get this done..

[@Tinker1837]

Thanks! Won't be clean for long! Doing a swap too? Swap all the things 😎

[@michaelarchangelthehammer]

@@Tinker1837 Yes I will be doing the same or om617, depending on budget and availability at the time, disco 1 most likely, 5 spd too.....where do you find the 4bt? Seem rare and pricey?!?

[@Tinker1837]

They are so much more costly than when I bought mine! Best thing to do is put the word out and see if someone has any equipment / trucks with one in that you can remove & scrap the rest to recoup some of the cost.

[@chrisseger6870]

Can't wait to see it drive

[@Tinker1837]

You can bet I'm working hard on that now, strong motivation!

[@ra7238]

Those cummins just sound so damn good.

[@Tinker1837]

Couldn't agree more!

[@robertjuric]

Hahaha the look on your face when it starts. So pumped for you!

[@Tinker1837]

Two years old anticipation becoming a reality :D

[@juniorkhan9539]

Good to see that smile and happiness on your faces after all that hard work

[@aecarter1341]

BEAUTIFUL. I would love to fit one of those 4BT in my old 64 Scout. I hit the like button a few more times when the coal started rolling in the disco.

[@Tinker1837]

That would be a great swap choice!

[@samroy8628]

Dude so exciting! Amazing work.

[@Tinker1837]

Thanks! I could hardly form a complete sentence afterwards, & thankfully a friend thought ahead of me & brought something to cheers after!

[@karlososorio2960]

That’s art !!!!!!!!!

[@Tinker1837]

Thanks! 😎

[@karlososorio2960]

Tinker someday I will have a Diesel engine in my Range Rover :’D

[@Tinker1837]

@@karlososorio2960 Swap all the things!

[@DJjosher]

You can light up a stadium with those lights. Nice! 👍🏻😎

[@Tinker1837]

Oh yeah, they are wicked. They draw nearly 50 amps!

[@acengineering990]

That's a big milestone! Congrats!

[@Tinker1837]

For sure! So happy :D

[@michaelhutin5451]

Your Discovery will be brilliant once it's finished, maybe the best around.

[@Tinker1837]

And I have no shortage of other plans to try out on it, but after a few back out on the trails & enjoy all this work... it's so fun!

[@michaelhutin5451]

@@Tinker1837 You make me feel bad, my Discovery is standard except for a snorkel.

[@Tinker1837]

You should've seen mine when I first drove a state away to find! All these projects start somewhere, mine was real bland.

[@kylerobinson9789]

You could make a big ol skid plate and put it under

[@Tinker1837]

That's the plan! From the bumper to the front crossmember, then from there to the middle crossmember, then a 3rd for the fuel tank.

[@vernmeyer4485]

Congratulations to ya. I have a 6AT turbo Cummings in my 59 Landrover Series II,88. I also put a NV 4500 transmission. Still trying to squeeze more MPG out but getting 20MPG now.

[@Tinker1837]

Nice! Hoping I can get mid 25's

[@comfort_in_discomfort]

So good. And the genuine excitement when something goes right! Awesome!!

[@Tinker1837]

I was SO pumped when it finally started coughing up smoke 👍

[@Confindencedrugee]

So great dude! Congrats on the first start, can’t wait to see this in action

[@Tinker1837]

Thanks! Me too, very excited!

[@deckrower]

Congrats! I’ve been following along since the beginning and this is awesome to see.

[@Tinker1837]

Thanks! Certainly has been a long time coming!

[@DknowlesPhotography]

Congratulations bro! Truly amazing work!

[@Tinker1837]

Thanks man! So happy to get this milestone!

[@tassap9355]

Oh yeah, all those little details!! Thank you for the great content 😄

[@Tinker1837]

No shortage of little details to get caught on with this project, more to come!

[@shawnchristenberry5072]

Congratulations man!!!! I have watched since the beginning. Such an amazing feeling and you have done a solid build

[@Tinker1837]

Thanks! So pumped to get behind the wheel again!

[@user-sf9ur6ur3s]

Well done very glad to your success...looking forward to the sequel

[@Tinker1837]

Thanks!

[@biam908]

I thought I saw gear oil going in the trans. Just make sure it's the right fluid the synchros in the nv4500 need a special fluid. As amsoil makes a pretty decently priced alternative to the dealerships

[@Tinker1837]

Yeah that's what the company that built it for me recommends (high impact) which is really convenient because that's the same stuff the Rover transfer case builders use too 😁👍

[@Tinker1837]

...and as it turns out the trans builder's site was outdated. That oil I used is iffy for my transmission, going to change it with some Redline MT85 stuff specifically made for it. Thanks for making me think on it more & double check!

[@MikeIllusion92]

This is great guys, I miss my Disco!

[@Tinker1837]

Glad I've been able to save at least this one from the crusher!

[@Dogfish47]

One of the best builds i have been following on KZbin, keep it up!

[@Tinker1837]

Hey thanks! Plenty more to come 👍

[@Reaper4367]

What a Beast! Cant wait to watch it pull down mountains ;). Cheers for sharing mate.

[@Tinker1837]

I'll bring a camera on the big trips I have planned for sure, can hardly wait!

[@joekirklin]

Congrats, man. It’s been really fun watching this build.

[@Tinker1837]

Thanks! Been a really fun project.

[@Texas12valve]

I watched the first episode, said I was gonna keep up on watching them. Forgot and just saw this. Great job man, super clean you definitely did your research and learned this engine

[@Tinker1837]

Thanks! Long time coming but well worth it 👍

[@73split]

Great job! Outstanding work and very entertaining and inspiring.

[@Tinker1837]

Thanks! I'll keep them coming 👍

[@cbrando190]

It’s alive...IT’S ALIVE!

[@Tinker1837]

😃

[@Cam-zz9zt]

Absolutely love it man! This is goals for my truck!!

[@Tinker1837]

Glad you like! It's a damn fun project I've dreamt of for years now.

[@erichramos9129]

you looked good, you are keenly detailed, there is no doubt that when you like your work, you do an excellent congratulations

[@Tinker1837]

Thanks!

[@guyinthegreencar]

That thing is sweet. Nice job on the build.

[@Tinker1837]

Thanks!

[@westernwanderer8397]

So satisfying. If you have kids and are married, I'm sure this was close to being the happiest day of your life. Definitely giving them a run for their money.

[@Tinker1837]

It was terrifying and glorious all at once haha!

[@rebel9838]

This thing is so freaking badass! It was mine and I could add one more thing to it, I'd a C.T.I.S. (C-central T-tire I-inflation S-system) to it which would just put it over the top and make it better than all of your friends vehicles. It would also make it so much more capable in any and all terrain you put it through. For those who don't know what C.T.I.S. is well it's a central tire inflation system which allows you to deflate or inflate your tires from inside the vehicle. So if you are off-roading and end up in a area with a lot of rocks that you didn't plan on, then you can deflate you tires to give better traction but also once past that obstacle you will be able to reinflate the tires. Another great feature you get with C.T.I.S. is run flat, where if you puncture a tire and can't repair it or don't have a spare you can press the emergency tire button which pumps air into that specific tire constantly to keep it inflated so you can get to a area to fix it or change it. The military uses it on most of their vehicles and since they do it makes it easier to find a whole kit from say a junk yard or eBay for pretty cheap. Oh yeah 1 other thing I would definitely add as well is portal axles. Which are found on unimogs for a solid axle or you can find independent portal axles on military Hummers. What is a portal axle? Well it's basically a axle with a extra gear box at the end where you Mount the tires which not only gives you a 30% gear reduction but also drops the wheel hub up to 6inchs lower which in return pushes the axle.upward giving you a extra 6 inches of ground clearance from the axle. Whit having a extra 30% gear reduction takes some of the strain off your engine and transmission helping them run cooler so you can also run larger tires without over working the engine and transmission. You can also change the gearing to give more reduction but less wheel speed for like rock crawling or less reduction for a higher wheel speed. Okay I'll stop here lol sorry for the long ass comment but when I start talking about 4x4,s and off roading I tend to not stop lol just very passionate about it. Thanks for reading this and have a great day.

[@Tinker1837]

I've got the modified Humvee wheels which have the ports for the CTIS and both my engine & transmission have PTO connections with options for air pumps... coincidence? Maybe. Haha!

[@dubfalcon4489]

Dude! So crisp on that restart . So happy for ya man. Great job.

[@Tinker1837]

It's crazy how quick it fires up! Thanks, was a big moment!

[@drb141719]

Congrats dude, been ticking for this moment. Can't wait to see the modded hood. Wooohooo

[@Tinker1837]

Thanks! I have some interesting ideas for the hood.

[@michaeljacobs1980]

Well done Tinker! You've been patiently building a quality rig and are that much closer to taking her out. 🍺 Cheers bud!

[@Tinker1837]

Thanks! Been a long time coming for sure, but well worth the wait 👍

[@thomaswykes3647]

Well done mate. I've been enjoying your videos of this project and it does inspire me to get on with my own Land Rover! Tom, from England

[@Tinker1837]

Thanks! We gotta try & keep these Disco's on the road, otherwise they'll be more rare than Defenders due to all the Disco engine issues.

[@Blockwash5]

Gorgeous work. Enjoy.

[@Tinker1837]

Thanks!

[@chdecoys]

Congratulations!!! Great stuff

[@Tinker1837]

Thanks!

[@quarksbay]

It has arrived!!

[@Tinker1837]

Finally! :D

[@257dieselrepairperformance6]

Awesome man congratulations!

[@Tinker1837]

Thanks! I'm about as fired up as this engine!

[@markm0000]

That’s such a nice engine. Good job

[@Tinker1837]

Thanks, and so far I'm really liking it for this setup!

[@ericvilla3161]

Hell yeah love that Cummins sound, you had me hooked since the beginning think of putting one in my Chevy luv how the the vibration?? I forgot if you used solid engine mounts or liquid based ones? Also if you dont need that supercharger laying on the floor I'd gladly put it on my 2v v6 mustang 😂 keep up the great work!!

[@Tinker1837]

It's quite a bit smoother than everyone was telling me, but I haven't had her down the road just yet so we'll see how it is living with it. I used the rubber sandwich mounts like the stock 6BT's had. Impressed with them so far. I have a whole pile of boost devices In the corner haha!

[@ericvilla3161]

@@Tinker1837 Tinker Really, yeah I bet those help out vibration, I've driven a lot of Cummins trucks 6.7 so nothing mechanical like the older ones but I drive a 2016 4500 and besides having a really stiff (everything) its pretty smooth. Hah that's funny :)) I'd like to show u some of my projects but I bet your quite busy maybe a I'll be a KZbinr some day and you'll be watching me hah have good one man!!

[@Tinker1837]

@@ericvilla3161 Those straight 6 Cummins are smooth! Feel free to link then if you get some videos up. Hey maybe, I'm still a just a new guy on KZbin.

[@joshuakrause8343]

To freakin cool guys! Love the build.

[@Tinker1837]

Thanks man!

[@timosborne6825]

I see your picture is of Michigan. Glad to see someone building something badass in the mitten state. I’m from Kalamazoo myself.

[@Tinker1837]

Yep, lower peninsula native & aspiring upper peninsula explorer.

[@geraldhawkins2643]

Man!!that was freaking awesome that's one nice rig you got there!!!!!!!! Congrats

[@Tinker1837]

Thanks! It was a bit moment in the build for sure, can't wait to hear it spooling up on the road!

[@timhunter9961]

Awesome work guys

[@Tinker1837]

Thanks! Was really glad to have some friends there for the big start-up 👍

[@NeoB-Lac]

Outstanding work brotha

[@Tinker1837]

Thanks man! Now to get the other bits caught up to do a road test. Driveshafts are out getting set up, crunch time!

[@chriscollison933]

Badass! Only words I got are badass and I’m jealous! Make more vids of that beast!

[@Tinker1837]

Thanks & will do! Wait 'til you hear it actually making some boost :D

[@rover215]

Milestone! Congrats, sir!

[@Tinker1837]

Thanks! Big moment 🤘

[@henryrollins9177]

Sweet sound! We love those engines here in Argentina..!

[@Tinker1837]

They are good for all different things! Trucks, tractors, etc

[@Deckardrick007]

I wish I could do this on my series. Very beautiful turnout.

[@jasonmontgomery271]

GREAT WORK LOOKS AND SOUNDS GREAT!!

[@Tinker1837]

Thanks, & man was I pumped hearing it the first time. Sounds even better than I could've hoped for & isn't even making boost yet!

[@SezerPAL]

Biggg dayyy, congrats from Istanbul, Turkey, following your dedication.

[@Tinker1837]

Big day for sure! Thanks!

[@CallofLukey]

Great job man!

[@Tinker1837]

Thanks! Now to hurry up & finish a few other things so I can get behind the wheel.

[@junglejonny1000]

Congrats bro!

[@Tinker1837]

Thanks!

[@robertcapadocia2664]

I watch all ur vedios from the start, congats very nice project thumpss up

[@Tinker1837]

Glad you like :)

[@adda58]

Great work!!

[@Tinker1837]

Thanks!

[@rfusco9251]

She sounds gooooood!!! Well done!

[@Tinker1837]

Thanks! So much hard work coming together finally :D

[@TheKnightDrag0n]

Sounds good, that black smoke tho.

[@Tinker1837]

Thanks! I'm super curious how it'll sound with twice this much boost like I planned 😎

[@lalorevels]

Amazing men, felicidades! You make an awesome job and it looks bad ass. 😎

[@Tinker1837]

Thanks :)

[@ithemaster1249]

Amazing project

[@Tinker1837]

Thanks! Can hardly wait to test it out.

[@funrun508]

Well done..!

[@Tinker1837]

Thanks! Been a long time building up to this moment.

[@soyarevalo]

Excellent and brilliant work.. Congratulations. LAND CUMMINS ROVER

[@Tinker1837]

Thanks! A guy doing a similar build had a great name idea... Land Rummins :D

[@soyarevalo]

@@Tinker1837 Realy the best Name LAND RUMMINS... THE LAND ROVER POWERED BY CUMMINS ENGINE.. Excelent Work.. Congratulations from VENEZUELA

[@squapsquap6975]

amazing. True dedication here.

[@Tinker1837]

Thanks! Working hard 👍

[@roversteve53]

Well worth the hard work, You do know you never really finish things like this ( maybe if I change just this one last thing …………….!!!! ) looking forward to seeing it go down the lane, Congratulation .

[@Tinker1837]

Oh for sure this thing will never be finished... like every one of my other projects. Getting behind the wheel again is going to be the next big moment!

[@4btcummins582]

Awesome job!

[@Tinker1837]

Thanks :)

[@diyguybz6191]

6:53 A chipmunk sneezed. Lol😊

[@Tinker1837]

I tried to google translate "gesundheit" but I can't seem to find the squirrel language in there haha