First Start with the Supercharger! | LSA Blower Swap

[@mattboles566]

You might want to recheck your belt routing I’m running lsa concepts kit to and it’s different from the way the video shows and clears the water pump easy

[@lsxmatt]

Matt Boles Lmao, dude your totally right. I have the belt routed wrong😂. I need to go from the crank to the snout, I wrapped around the idler in between.

[@mattboles566]

LsxMatt yeah I finally finished up my lsa swap in a 65 c10 it’s been a butt kicker And trying to get time to work on my 3rd gen camaro Check my Instagram cool_old_stuff_

[@lsxmatt]

Nice, will do! And yea I hear ya.. This has been some project as well, plus having to work around the weather sucks too.

[@nerohendo6593]

Can’t wait to see this thing after its tune.

[@mk23hk]

I am so jealous !!!! I wish I had my old 89 RS still. I would definitely do a LS swap on it.

[@stefanwinter1377]

This channel deserves more attention

[@jasonscott6731]

Awesome, cant wait for the tune!

[@PyrosPelagics]

beautiful work of art

[@browntrout3994]

2:30 you need set of deep well sockets but thats one sweeet ride

[@realdealsteelgarage]

Nice 👍 awesome build man. I start tearing mine down tomorrow. Can’t wait till I’m as far along as you.

[@forevercleandetail]

I have A83Z28 that I'm about to pull the 305 out and put the LS in before that I have to put in the new Cam water pump oil pump and headers you keep working on you was in I work on mine my brother lol

[@Turbogto_guy]

Hey guy, just want to give you a tip. When you start having belt slippage, pull the top pulley off and sand blast the grooves. Guy I work with has a 8 sec 5.0 and he did everything he could to stop the belt from slipping. I told him gimme his pulley and I’ll blast it. Stopped the slippage completely.

[@lsxmatt]

Good to know, thanks

[@jermaineknowles87]

What kind of accessory drive kit is this

[@lsxmatt]

Lsxconcepts

[@kazepg3d]

pretty cool

[@1964rmcc]

Nice Matt congratulations thanks for sharing this with us !

[@nukedbunny8642]

cool.. just subbed. I got one of the 5 GM build Testcars: Pontiac Trans Am / Firebird 1991 here in Sweden, Factory weight reduction and so on.. The Red One.. Been looking into to do the same thing you already done..so gonna use your channel as inspiration..

[@lsxmatt]

Nice glad to hear that!

[@nukedbunny8642]

hell yea.. nice to find a channel with no: Does the mullet comes with youre 3rd gen to..haha..so yea.. =)

[@davidstephens4639]

Be sure to joijn thirdgen.org for all the tech you could ever need.

[@squirlesg2228]

All I can think is pulls 😂 I’m ready man let’s goooo

[@lsxconcepts5125]

Hi Matt, love the videos of your install. you have the belt routed incorrectly

[@lsxmatt]

Hey thanks for the comment, It was me, I installed the belt wrong. When I measured it was routed correct, but I wrapped it around the idler instead of straight to the snout on the right side. It’s all fixed now, thanks.

[@Alan-zz3st]

do you have a video where you go into detail with the whole set up?

[@forevercleandetail]

Now I'm going back trying to find all the your videos trying to find the one that you were saying all the wiring harnesses to the left which is the passenger side we don't need I want to make sure I heard that correct before I take all a mind out and I may need them

[@lsxmatt]

Thats right, the whole harness on the passenger side going through the fender and into the pcm gets removed. Thats the old engine harness. The psi harness is the new engine harness that will control the ls1 motor.

[@forevercleandetail]

Thank you thank you my friend

[@Tellos313]

Bad ass, love it! Keep up the good work!!

[@lifewithjusto392]

What front accessories are you running?

[@gonzo350]

Congrats man!!

[@TheRwdyAudi]

VERY NICE BUILD MY DUDE I'M DOING SOMETHING VERY SIMILIAR TO WHAT YOU HAVE BUT IN AUDI DRIFT CAR IM BUILDING WHAT WHICH ECU AN HARNESS ARE YOU RUNNING AND ARE YOU RUNNING A SET OF LSA INJECTORS NOW?

[@erickvillarruel4032]

Badass

[@gregbrowne3395]

Is that a LSA water pump you're running? I'm doing a LSA in my 66 Chevelle and I'm trying to get as much of the pulley setup as I can

[@lsxmatt]

I’m running a stock Ls3 pump.

[@gregbrowne3395]

Is there a particular year pump you have?

[@DatHondaBoi223]

What fueling mods are you running? I’m lsa swapping my 2015 Camaro ss

[@OldManFrank]

I have finally come to an end of binge watching your videos. *Sweet Build* so far. I have a 1976 Camaro RS 350 HO, so we're Camaro brothers! @camaronado

[@SouthernChevyTv]

Sweet

[@MichaelBrown-kz9qk]

Can I run this set up o LQ4

[@trapspotcustoms627]

Sounds beasty

[@ingith123]

Why not to go initially to 110-120 ft on the tention and then run it for a few minutes and then check the belt tention?

[@12871320565]

Will Lsa fit under regular hood

[@camarotwofast]

I know this is a year old video but they sell continental elite belts at auto zone & Napa

[@stunt509]

Where is the part where it sounds insane

[@lsxmatt]

I may have edited that part out🤷‍♂️

[@stunt509]

LsxMatt hey man! Now that's insane!😋

[@lsxmatt]

stunt509 haha see that’s what I meant by insane😂. Check out my newest video, it’s running way better and also whines a bit👍

[@xmarksthespot4617]

Very nice! Subscribed!

[@trudad03]

So did you get the the blower and belt drive separate. I see the links that you posted but it's just showing the belt drive and the supercharger itself

[@lsxmatt]

Yea I got the blower from ebay, the belt drive from lsxconcepts

[@BADAZZ93STANG]

awesome video brotha. ..

[@forevercleandetail]

Hey brother I'm back again I know I left you a message I believe yesterday or Friday today is Sunday I will be ordering my wiring harness I ordered the I'm tribe by cable throttle body I have a wiring harness that I'm selling keep in one computer and selling the other 1 but I did order the wiring harness from PSII begged us to latter but the company you told me about I gotta keep following you you're definitely inspiration me my nephew was doing this hope laschet have it started by Christmas no later than 1st of the year it's cold out here and we don't have a garage

[@JoseCruz-qf6ui]

Are superchargers better than twin turbo for 6.0 ls?

[@gmeapetomoon7453]

B.a. want to do this to an 02 vette.

[@vernonchaney65]

What tb cable bracket are you using?

[@goldenchildxx4015]

Where did you buy your supercharger from ?

[@lsxmatt]

Ebay

[@vernonchaney65]

What power steering pump and reservoir did you use?

[@lsxmatt]

Its a corvette pump and honda reservoir

[@vernonchaney65]

@@lsxmatt what yr honda model?

[@toddaulner5393]

Whomever invented that fingertip tool is great!

[@RogueKnight33]

What motor?

[@civicekcoupe]

What truck injectors are you going to use that for your Las supercharger

[@lsxmatt]

I used 80lb siemens injectors. I was going to put 03 suburban injectors in there temporarily to drive it to the tuner but I ended up just buying the software to flash them myself.

[@civicekcoupe]

Do the truck injectors fit the lsa tho

[@SteveHafner]

where did you get your aluminum radiator over flow can on the inner wheel well from? I like that a lot.

[@lsxmatt]

Thanks, I found it on ebay.

[@dart760]

sweet

[@ryankursehuston]

Found your channel yesterday and have binged most of the videos... 3rd gens have been my absolute dream since I was 8... still haven’t gotten my hands on one, searching for an 87 t-top z28 5.7 TPI but they are a rare gem. I’d want mine to look very similar though blue is my favorite color and I also was wanting to do the same ground effects kit from the later models. Love the videos and the car is amazing! Can’t wait to hear it running after tuning!

[@davidstephens4639]

T-tops are a mistake you won't make twice. That's why hardtop cost more now. This last time around I chose an an '86 Sport Coupe hardtop rather than a '91 Z28 T-top. Also, engine swaps are easy, so get a nice 305. It doesn't have to be an '87, either. Insisting on a certain spec may put you in a worse car at a higher cost. Grab what you can and start enjoying it.

[@Rich3pz]

Is this on a 5.7 LS1

[@lsxmatt]

5.3 lm7

[@boostedthirdgenracing]

Did you do any thing to the Bottom end of ls or is it stock

[@lsxmatt]

Bottom end is stock.

[@boostedthirdgenracing]

I have a 1984 Camaro Z 28 that I’m going to put a ls 5.3 ls that I want to turbo it did you open the ring gap ? I love your car thanks for the videos they are going to be a lot of help in my Swap thank you again

[@lsxmatt]

Didn’t open the ring gap for the blower. If you’re going turbo and planning on big power you should open it up.

[@CampbellSuperKids]

I thought that I would ask you since you recently posted about doing this. I just purchased a 2000 trans am and I want to do the lsa blower install. Do you know if it will be smog legal?

[@lsxmatt]

It depends on how strict your smog laws are. As long as you keep the cats and evap, and leave the cam stock or pretty mild, I dont see why it shouldn’t pass. We don’t have smog by me so Im really not sure though.

[@RBFR01]

The engines computer is way off, you gotta get that tunes for sure

[@joserodriquez4439]

this a 5.3 with a lsa supercharger?

[@lsxmatt]

Yea

[@mattunruh8554]

Wow...that did sound insane. Inability to crank over and coughing for 3 seconds. So sick, bro.

[@lsxmatt]

Sick indeed

[@roberttrevino4184]

Belt doesn't make difference IMO I'd stick with the gates iv sold automotive parts over 15yr only other brand I would use is a Goodyear gator back

[@sylvestervannormanjr8208]

👀👀👀

[@yehornaumov5893]

Well it starts like GM

[@wilsandm]

That finger tool is measuring tension not torque. I'm a jerk for feeling like I had to comment about it.

[@marolsx874]

Sweeeeeet

[@morty5345]

wish I could say the same about mine :(

[@richiegoolcharran8854]

Can u sell me ur LSX intake manifold

[@lsxmatt]

Sorry It sold a few months back.

[@alex__ls139]

What throttle cable you got ?

[@trentdawg2832]

What size fuel line supply and return are you running?

[@rafatrill]

Badass