First Time Cupola Build...I Should Have Read the Directions! FARM SHOP

[@Kosta_TheWoodGuy]

Haha anyone else just yelling read the instructions like me. And I called it on the upper lip needing to be screwed together first. Never even seen one of these. Super cool! Love your videos always.

[@sparky178]

I wired a horse barn with cupolas. I installed lights in them, it looked awesome at night.

[@jeffmurdock8321]

I was thinking of that too. Nice.

[@brianhubbard4175]

Adding a third person for filming as made your videos much better and at a high level, congratulations Mike! God bless you all.

[@joeyjohnson9765]

Is Mike the camera guy? Or are you talking about Kyle

[@doubledarefan]

@@joeyjohnson9765 yes, Mike is the cameraman.

[@MichaelMiller-dw3vu]

Something like a little soap should help those corner pieces slide a bit easier.

[@BellavistaPEI]

At 7:30...."You are a gentleman, and a scholar." If you want to continue that saying, I always say, ...."and there are very few of US left!" Great videos gentlemen! Always interesting and educational but we're STILL waiting to hear Greg with his own mic! We love your back and forth with each other and it offers a lot of jobsite humor which always helps a day go quicker! Keep up the otherwise awesome work and we'll keep watching! CHEERS!!

[@ranger5814]

Greg's eye roll at 11:58....lol

[@damstr8345]

Greg.. your a hoot. And a added bonus to perfecting this show.

[@simoncarney9944]

First thing out of the box is the instructions! 🤯

[@ScoutCrafter]

Cupolas were originally designed for ventilation at the peak of the roof where the hottest air would accumulate. Early models had slats and modern working cupolas have casement windows that open via a hanging chain.

[@GOAP68]

Few years away from building my bardo. Hoping to setup a cupola as a “Widow’s Watch”. Will be a good spot to see most of the property. Just need to sort out reasonable access. Neighbor has his setup and even included switches to the lights on out buildings.

[@Overpar73]

That Cupola is very nice, I think I may just go with that one instead of the plain vented one. Everything is looking very nice guys, thanks!

[@roderickmarruffo7600]

What the...?! 2 grown ass men looking at the instructions...! What's the world com'n to! C'mon guys... Lol that was fun to watch, good job...

[@davidfuentes3372]

David - San Antonio TX... Thank You So Much For Getting A Camera Person !!!!!

[@howtodoconstruction9813]

I always find it interesting watching other ppl do things i do as well enjoy the content 🎉🎉

[@Z-Bart]

Really dresses up that roof. 👍

[@drifting26]

Kudos to the camera guy too!!

[@tonyrobbins1665]

I tap a scrap 2x4 block to gently get the roof stiffeners up. Then feed the tab at top in between the silver and black plates. Tightening the base bolts locks them in place. Square up the top plate to the roof panels before tightening the bolts

[@robavis4906]

Looked really good. Nice view from up there. Your videos are really good. I enjoy watching good work.

[@horstszibulski19]

So this thing is only for show and not venting or to let light in? 😲 But funny way to overcome all the obstacles while fitting it together! 😂 Thx for showing! 👍👍👍

[@kencross25]

Gloves and paste wax would have helped. I put this same Cupola together for my garage.

[@johnlenhart1460]

I hope your client decides to put a light in that cupola that look awesome at night having it lit up 🙂

[@damstr8345]

After watching this.. I will install 3. All lights weathervain in the middle. I think I would even do a cut out to add light inside.

[@tonyrobbins1665]

Why don't you set the bottom of the 2x6 x braces at the top of the grey pole brackets? So they bear on the face of the pole instead of the metal? I like to put an 1 1/2 seat cut on the top of lower x, and bottom of upper x, so the upper bears on the lower 😊

[@BraxxJuventa]

Nice Cupola Kyle! Well done! 😁👍

[@bradrf4088]

Man I thought I was about to get cut just watching you guys slide those corner pieces on.

[@peterdement]

The building size requires a larger scale cupola for better proportions.

[@kennypool]

Just get a bigger phone

[@c.a.martin3029]

I thought the same thing, it's way too small on that big of a roof. And it would be nice if it performed some type of function, like ventilation or allowing light inside the building.

[@AustenitizedRecords]

@@c.a.martin3029 They are not good for light even with the windows. But if you get a ventilated one you have to cut a hole in the base which is allowed without effecting warranty.

[@scottroberts2893]

What about the ridge vent? Will there be an open section inside the cupola? Looks great though!

[@grizzle4155]

Nice work as always…reference section 7.11.1 of the ANSI/SIA..I would suggest not filming violations (Greg on the ladder in the scissor lift), it could hurt liability insurance…just saying.

[@pdcro1247]

I hope your putting a light in that cupola to make it shine at night time!!!

[@tbj4855]

Damn I haven’t seen this channel in a couple years. Great video

[@scotttalkowski691]

That would look incredible at night with a light in it.

[@reidwardle3992]

What about ridging the roof inside the cupola before the roof of it goes on? In case hail breaks a window pane. So that any water ingress goes out under the base and not through the building ridge gap. Love your buildings and detailed work. Reid in South Africa.

[@Means2anEnd2025]

That's what I was thinking too!

[@tomlattanzio2670]

It looks great.

[@KyleKjorsvik]

If you don't put it together wrong before you read the instructions, the instructions won't make sense. But once you try it on your own the instructions always make so much more sense, hahaha.

[@fw1421]

Unless it’s designed and produced in CHINA! Their conversion to English is always a challenge!

[@missulu]

The best part of being a sunburned redhead is they can't tell when we're really embarrassed by our mistakes... LOL

[@yeahnah8378]

I’d be constantly embarrassed if I was a redhead

[@missulu]

@maruiacancerc Best of luck to you! Life is strange even in the good times...

[@ibgeorgeb]

Nizhoni (beautiful). 👍🏾

[@ibgeorgeb]

@RRBuildingsYTOnNicegramm Greeting. ~ Ibgeorgeb.

[@thedivide3688]

I hope a light goes inside that cupola…would be rad!

[@richardworrell8622]

didnt see any weathering on roof sheets under ridgecaps??? do you do later or add foam infills?

[@corypride5096]

I Get it now. Kyle is an ALPHA builder!

[@157-40_T]

Did you need to use sealant before you screwed it down?

[@joshbaker855]

Hey could you do a variance on them and use them as an attic vent with a fan? Ive built a few barndominiums and even forced air venting is kinda coming back for attics. I could aee vent the ends and even the fans are located there but vents out the top

[@divarachelenvy]

fantastic...

[@glri]

Thank you for your time

[@shenlonggohan]

Around 7:00, that X braced corner, are those posts 8 feet apart? They look more narrow than the spacing on the rest of the building.

[@bret_Lambky]

Next time put some Wax or “door ease” on the edge of the panel or the closure. It will make the splice easier to slide up the panels.

[@bobgreenhalgh7324]

Very nice

[@dylanbardolf5618]

Didn't you do a prefab cupola of plyco around 6 years ago in your workshop?

[@christophermcneil7534]

When all else fails, remember RTFD (Read The Freaking Directions) Cupolas were originally created for barns so that fresh air could be ventilated to the livestock inside.

[@therealdojj]

learning from the guys decades ago on this old house, you need to read the destructions....

[@kipcarroll5644]

That was tough to watch for my OCD brain !😆

[@rodesdara]

Does your clients ever watch your videos? :D Well props to your camera guy! Not many will stand on a roof with you!

[@tbom1021]

Down in Elgin, It's south of you.🤙

[@strmrdr]

Why not seal the ridge under it? Any damage and you have water pouring into the building.

[@PaulMikna]

I put shed kits together, and yes, sometimes you do have to break down and read the directions.... My partner and I still sometimes reread them to make sense of things.... You're not always turning a wrench or screwdriver on the job.... Sometimes you read directions or watch videos on YT!

[@lisawallace3124]

If all else fails...read the instructions!

[@aserta]

RTFM :))

[@EdJanuskis]

Always RTFM!

[@olgajoachimosmundsen4647]

Kyle: do you have experience with Dewalt 16g cordless nailer?

[@brianwood8316]

Can you show the framing necessary for a cupola in a future video

[@matteberry58]

You get what you pay for also applies to cupolas. That sucker is stout!

[@Salvado5906]

Is Greg wearing Adidas and if so what style?

[@chadmarshall9683]

Instructions are just one mans opinion!

[@TechEdFireman]

@9:04 Jim always like to say, "you go to school on the first one."

[@JH-tc3yu]

I can't believe that cupola kit wouldn't have the main fasteners inside the cupola vs exposed to the elements?

[@jayjones5233]

What happened to the corner brackets you installed at 11:35? They disappeared….

[@kevinorr6880]

Historically, what is the purpose for the cupola? In my mind, it was intended to encourage ventilation in the heat. I don’t have proof though.

[@582tird]

At on time cupolas on barns were pigeon coops so you could catch squabs ( fledgling pigeons) for pigeon pie.😋

[@JBLewis]

A little painful, when we're so used to seeing Kyle being experienced and knowledgeable, seeing him waffling and and uncertain. At least (well, as of 6:40) nothing was damaged.

[@thedivide3688]

Well it’s a good exercise in humanity…more kudos to him for posting the video.

[@billstech1715]

You would not believe how WD-40 can make things slide.

[@kennypool]

Is that the new Francis Ford Cuppola

[@petetoemmes6673]

Yeah...Apocalypse Now

[@leggegaz]

Always amazes me with these buildings that there is so little structure to them, roof trusses like 2.4m apart. We build house extensions here in Scotland and have to use steel beams for ridges and trusses are 600mm apart sometimes 400mm. Tiny compared to these buildings

[@JH-tc3yu]

pole buildings are built differently than a typical house here in america

[@leggegaz]

Yeah absolutely, a lot of the stuff we build is so over engineered. When something like this will still be structurally sound with so few materials. It’s great to watch! Do you do this kind of work yourself?

[@robertgriswell6066]

WD-40 , Kyle !!😊

[@robertgriswell6066]

Kyle, are you talking to me ? I’m confused !

[@robertgriswell6066]

Kyle, how can I contact you ?

[@josipmatic4732]

So cupola do not pass lightning inside?!

[@georgeholder5076]

And I thought that a Cupola was for letting light in , and a place for rising hot air to exit

[@ronnydisterhoft5144]

Hey man, you wanna send me one of your stabila torpedo levels, my current set up is missing one, would really appreciate it:)

[@MysteryScienceGaming]

lol love being a Man 00:44

[@BWIL2515]

Nice

[@outfitr9703]

What's on your shoes?

[@GJMBuildingJoinerycarpentry]

cant believe a man of your skill set thought a hemmed corner piece of steel was all that was gonna hold that cupola together 😂😂😂😂😂😂

[@jimjames7479]

the only difference between a journeyman and an apprentice. the journeyman knows how to fix his screwups.

[@jwristen24]

My wife laughs at me because I always read the directions. I build million dollar projects, she can't build a birdhouse

[@alk7142]

One inch of cupola for every foot of ridge is how I was told to size one.

[@damstr8345]

Read the instruction so you can never be screwed.

[@cuttheknot4781]

Definitely NOT centered base upon the pull away drone shot. I hope you all do not have to center it. Pretty obvious to my eyes. Fun video, as always. Thank you

[@waltk9067]

👍✌

[@edwardince6142]

Denial is the greatest delusion.

[@FredMcIntyre]

😃👍🏻👊🏻

[@AngelLuisTrinidad]

I was shouting, read the instructions.

[@EuroGuy85]

I think it'd been easier if you just built one out of 2x4s than waste time on this thing. Have you ever built one?

[@AustenitizedRecords]

I hate these things. They are so expensive and a pain in the butt to build and install. I have gotten pretty fast though, i can slap together a 4'x4' (our most common size) by my self in a hour. I have came up with alot of mods over the years to reinforce them, their stock configuration just seems to flimsy for midwest winds imo. The corner pieces of the roof with high winds will vibrate and they slide down and the whole roof goes limp and flops around in the wind. I put a stitch screw at the base of all them pieces and it seems to prevent this problem.

[@jwristen24]

Self tapers, poor mans drill bits

[@peterleishman431]

🏴󠁧󠁢󠁳󠁣󠁴󠁿👍

[@modockthegreat]

a francis ford cupola video.

[@corypride5096]

I dunno, guys. You were up on that roof so long there was a vulture circling overhead...

[@mostlyinterested1016]

I've spent so much of my life, or so it seemed, taking people's stuff apart and rebuilding it PER THE INSTRUCTION MANUAL!!! Every piece of kit-built product comes with a comprehensive manual, usually in 4, but up to 12, languages. Some, like IKEA, do pictograms, others give you both dialogue and graphics. As long as you follow the dotted-line, you can't go wrong. Then I watched the rest of the video and there's Greg almost yelling at you for STILL not reading the freaking instructions. Read and follow the instructions. You cannot go wrong that way.

[@damstr8345]

Keep in mind.. when the teacher makes a mistake. The students learn better from it than the teacher.

[@mike93lx]

Joking about and filming Greg on the top step of a ladder while on a scissor lift is a bad idea.

[@georgestarling9367]

You are reaching here for a video.

[@Huskyresqr]

why don't either of you where gloves....especially when working with roofing, siding, etc metal?

[@richhansen8617]

Ikea

[@nuttin2seahear920]

WOW ..Need direction's?.....Tinny piece of trim requires a Martinez??......Next thay will build with BLUEPRINTS ???....Might need a LVL DAAA I just watched 2 experienced builders spend more time on a prefabbed box, than thay did on the music garage ! STOP THE HARMONE BLOCKERS NOOOOOOW!!!!! HEHEHEHE LOL

[@aserta]

Shame they're not functional. That said, that cupola is waaay too small for the size of the building. From 20 meters away, squint and you'd think it's an odd chimney. Do they not come in different sizes?

[@petetoemmes6673]

RTFM