SC knot Braided To Fluorocarbon Leader || Best of the best Fishing knot 200% Stronger and easy

[@factsdontcarewhatyoubelieve]

I used this knot on an 80lb flouro/braid set up to land a 190lb bluefin on my last 3 day trip off San Clemente..worked flawlessly and went thru the guides perfectly! Thanks!

[@acme9538]

Kudos for being able to tie this in the 1st place ! Even better that you were able to do it well for the camera. Mad respect.

[@fifis101]

I am a proud FG user but I'm actually going to give this one a go!

[@rebornpho5716]

I think he just converted me as well

[@jacksica7808]

@@rebornpho5716 same here

[@rustyreidfishing3334]

I’m gonna give it a try but I’ve used FG long enough it’s now easy and has never failed

[@jacksica7808]

@@rustyreidfishing3334 i tried it and it didnt sinch down for me ill stick with the fg

[@tjlastname5192]

I don’t know if this one is stronger, but looks like it’s less easy to screw up.

[@carsonridd]

I’ve been tying this knot forever but I didn’t realize it could be tied so much better and easier. Thanks for the video!

[@patrikcarlsson2489]

Super nice variant of the FG knot with a Rizutto lockdown. Maybe also do a “half hitch” on the tail, close to the knot before burning. That will certainly secure that the braid do not splice up in to the Rizutto knot. Awesome good take, big thanks for new easyer ways to great knots😃👌

[@andrewmorke]

This is not an FG. It's a Yucatan. FG wraps alternate.

[@cambaridiy9032]

Looks good but i'd add the rizzuto lock after cutting and burning the fluoro for a more tapered knot junction and thus smoother pass through the tip guide. What do you think?

[@ismulnaim2949]

@@cambaridiy9032 🤔ᴴᴹᴹᴹ 👍👍

[@thewaterox1]

Very good example of the Rizzuto finish. I like to use the finish on a FG knot. 👍

[@DoubleBogeyBaker]

I guess this is good for certain types of fishing and depends on what your targeting. I do a lot of inshore for tog, summer flounder, striped bass, stuff like that. My double uni for 10lb or 15lb braid to 15lb - 30lb fluro has let me down rarely. I just think this is overkill if your trying to hurry up and tie another leader on while the bite is good. IMO

[@hzoonka4203]

agree,is a overkill!

[@Onethirtytwo]

Tautog

[@ilijakeca5496]

I found Alberto knot to be quite sufficient in almost every situation so far.

[@cameronbamess697]

For lighter leader like 30lb it might be overkill, but when your using heavy leader the small diameter of the knot makes it so much more easier to cast through your guides, which makes it worth it to spend the extra minute to tie a knot like this or an FG IMO

[@rhodesphotoco]

I use the GT for similar conditions, best time/strength balance I've been able to find.

[@trentfrmpunchy]

Clean looking knot, I would cut the leader tag before rizudo finish to hide the leader tag a little more. Have to give this one a go.

[@iain1969]

I like the idea of tying the finishing knot over the braid to form a taper and cover the leader tag. Sounds good in theory - might have to give it a go!

[@308Fishing]

Definitely a worth while modification. I think I will start doing this with my FGs. Thanks for the tip!

[@elliottaniguchi7817]

Good luck in the middle of a wide open bite. Cool knot.

[@ITigerbaum]

Wow. I don't have that much time. Double Uni and fish in 60 secs. In the dark. I am sure this is twice as strong, but i catch more fish with baits in the water. Thanks for the relaxing video!

[@thedon9670]

good luck trying to get double uni to go through micro guides on most fishing rods.

[@ITigerbaum]

@@thedon9670 18" leaded for my needs

[@hartfordboothe7466]

I like the video, it's clear what you're doing. This knot, until about 04:00 and the finishing half hitches and such are added, is an icicle hitch. It's excellent for rigid poles/posts. It tends to separate between wraps as it's loaded which may be why some comments indicate that it either fell apart or slipped: the mono may flex too much to keep the icicle hitch structure in its needed form to hold fast. I dunno about that...but it starts as an icicle hitch. Doesn't change the fact that you did a nice job making the video and conveying how to tie the knot.

[@Spiraljam]

Good for heavier leader line. Good luck pulling that tight on 8lb test.

[@johnraguso4910]

This is a great version of it...easier to tie compared to the FG. Great Rizzuto finish.

[@James-qt9dj]

I use 20 lb power pro braid and it’s so smooth that it cause a problem for me when tying the FG… it’s very difficult to lock it and also the single strand braid is hard for me to manage. I have often thought to double the line and in searching how to do that I found your video. I plan to try this and thanks for the great tutorial.

[@mattymattmatt101]

I use 15lb PP & 12lb floro. I agree. It's a little tricky but I've never had one fail myself. All four tied prior to spring walleye season are still on and doing well after a lot of trips out. I suggest tying them at home at your dining room table or somewhere with controlled conditions.

[@307Smallmouth]

I use .6 or 14lb YGK X8 and it is very slick. I have found that when I tie this knot I have to tighten the mainline braid first. If I pull on the mainline braid and tag end to cinch the knot, it will slip every time. Sometimes I have to tie it 2-3 times to get it to bite, but once it does, the knot is solid and goes through the small guides really well.

[@someguy-k2h]

SC is my goto connection knot. Love the Rizzuto finish.

[@dongkhaoradkr]

This is the best one fishing knot for connecting fishing lines, thank you for sharing

[@401-Fishing]

Thank you!! It's truly an awesome knot tying tutorial!

[@kevineggsandbacon]

Hoping the SC is for South Carolina here. Just learned the FG and now I will forget it. This seems a good bit easier on the coiling portion.

[@j.r.r.toking]

Thanks for posting this. Going to practice this one.

[@FishingknotsChannel]

👍👍👍🙏🙏🙏

[@michaelvanbeveren1094]

Super nice man, alternating half hitches, love the attention to detail !

[@FishingknotsChannel]

🙏

[@jacquesmeyer1122]

Excellent knot Very time consuming, but will do the Job. Only used once for spinning

[@leeyarbrough9636]

Just a doubles up Albright knot , an iv never had an issue with that knot. Good video

[@James-qt9dj]

Albright has the tag end of the leader pointed the other way, which can contribute to wind knots and decrease cast distance due to catching the guides.

[@hillbillytarzan]

Sometimes people don’t realize how VERY important it is to finish the knot off after cinching the main knot and I do it the exact same way. Sometimes that braid tag end will fray and keep coming apart deep into the knot until it fails. Plus the knots you finish with give the main knot a slight taper that helps when the knot passes through the line guide and rod eyes on the cast.

[@oilrigfishing]

don't make your leader that long imo I don't let my knot go through the rod eye

[@oilrigfishing]

I also don't let my bead or weight go through the knot 😉 and I'll typically tie my bead and weight above the leader, and on my main so that there's never any resistance when the fish is pulling drag. Most people will use 2 beads one to protect the hook knot and the other to protect the Alberto sg or whatever they are using but I wanted to reduce that

[@Giganik]

For more thinner is fg knot, no doubt. But for strength i haven't try this knot. But i think it worth to try. Nice video.

[@hectormanchastudio]

Interesting. Think the knot is a little over kill lol, but looks strong for sure

[@bobb3rdown676]

Im gonna give this a go soon. Used a uni to uni last time and hated it. Have used the fg in the past, but this looks a bit quicker. Usually go 40lb braid to 20lb floro or 30lb braid to 15lb floro.

[@reynierredondo2436]

Seems good but take too long time.....during we fishing, we need something good and fast in the middle of the waves....but I will learn about it....seems good alternative...thank you.

[@peterheinrichs7634]

I'd like to suggest an improvment the your knot: You made the final knots around leader plus main. If you'd make just a couple of half knots around both, it would end up perfectly safe. I'd tie the final knots only around the main line. These knots would protect the main line from friction between the (melted or sharp) end of the leader and the braid.

[@alansteinle7632]

Going to give this one a try. In my experience, after around 100 casts the FG becomes weak due to it impacting the guides when cast. Granted, I'm often casting for max distance so the knot gets beat up pretty good.

[@FuzzyJDunlop]

Finish the fg like he finishes this one...Rizzoli finish I think its called? Should be good to go. Tight lines!

[@FuzzyJDunlop]

Rizzuto finish...my apologies

[@JerseyMiller]

Try a series of half hitches above the cut end of the monofilament. Then finish with the finishing knot from this video (Rizzoli?). Sometimes I will stack several finishing knots in sequence. This beefs up the the front end that gets bashed on it's way through the guides. And if one fails, cut excess and melt braid at top of next knot.

[@rebirth_mishap]

Catching fish or not, these are very relaxing 🤗

[@xSeadoggerx]

I started tying this knot one morning at 8 AM when I finally got it perfected, it was time to go home that night. I’m a firm believer if you can’t tie a knot tie a lot

[@FishingknotsChannel]

this is a video tutorial. You won't understand if I do it under normal circumstances

[@grantd.5438]

Seems almost the same amount of time as the FG, for me at least. Finish is the same. Going to give it a try! Another one I love is the 'no-name' knot. Basically double overhand on the leader, single uni on the opposing braid after threading.

[@yentegoossens3244]

Yes but you dont need to keep tension on this knot like you do with the fg, that's why (for thin mainline) i prefer this knot

[@anastrading1815]

thanks for this SC Knot , i already catch 2.5 kg Mangrove Jack

[@FishingknotsChannel]

Cool Sir 💯👍👍👍👍

[@4Reel77]

15 turn Yukatan knot with a rizzuto finish, I tie a similar knot with a simple cairns quickie on the double, so easy and solid. I dont think you need the Rizzuto finish in most applications, however. I tie 8 turn with 20 to 50lb braid here onto 40 to 100lb mono in most scenarios.

[@ruskyrosco1054]

You sound like you've forgotten more about fishing then most will ever know.

[@dunerinaz]

This is not a Yucatan knot. It starts the same but is completely different

[@dieterfassbender7803]

Ich benutze diesen Knoten seit 1 Jahr und hatte noch nicht einen Abriss des Knotens....danke.

[@dewatanet8901]

Saya akan mencoba tehnik ini,ini sangat luar biasa

[@FishingknotsChannel]

Good luck brother

[@razvanspataru7228]

I use FG,but this one its like the same...but I have to try which one is more stronger Thanks for the video...!

[@ljubisamalbasic7093]

Awesome...8 min to tie a knot...super👌

[@iain1969]

Like the FG it looks complicated and the process is drawn out in an instructional video. With practice they can be tied inside a minute.

[@ragilfishingchannel]

I'm sc user too, it fast and simple but so strong knot

[@p-r-i-v-a-t-e]

Imagine doing this in New York winter on the boat with 35mph gusts and thick gloves on your hands while having a good bite. Don't forget to tell the fish to wait a bit longer 🤣

[@JOSECHOW-tm6zy]

lol with u ,, not at u!!

[@balineseghz2783]

Bagus kreen kang kuat mantap.👍

[@FishingknotsChannel]

Gd bless you brother

[@jabangun]

Looks interesting, but hard to do when you're on a boat in choppy seas which is 80% of my fishing. I can do an FG knot in less than 5 minutes. Never had a FG knot fail on me.

[@abdul-hadidadkhah1459]

FG isnt easier than the SC, maybe because you learnt the FG first it appears easier, but for a beginner the SC is a bit easier.

[@jabangun]

@@abdul-hadidadkhah1459 Sorry, but you must have learnt FG the hard way. SC shown in this video is 100% definitely not easier than FG.

[@abdul-hadidadkhah1459]

@@jabangun I've seen enough videos on here and wrapping a loop of braid around a leader is way easier than pleating it under tension. The need for cinching and finishing are apparent in both knots and identical i.e 2 half hiches and a rissuto finish.

[@jabangun]

@@abdul-hadidadkhah1459I recommend you watching videos of FG knots under 1 minute. Also as I said in my original post, this SC method is hard to do when on a small boat in choppy seas. But everyone is entitled to their own opinion. For me FG is better. Thanks.

[@jaaron2834]

It's another version of the Yucatan knot....any proven knot will work if it's tied correctly,.. but the finish whipping is key! I would have tapered the mono tag end before the finished knot ... so your line.. whether going out or coming in through the guides, becomes much smoother .... my leader wraps around the spool 4/5 times because I sling heavy lures and don't snap off... Don't forget to superglue the finish so it never unravels. 👍😎🤙

[@ogyalvesfishing]

Mantap...bos ku🤝👍👍👍

[@FishingknotsChannel]

Thanks brother

[@fishwhistle9612]

Every time I tighten the initial knot at 2:09 the mono just wants to slips right through. Not sure what I'm missing here. Knot also slips at the end. Can't figure out what i'm doing wrong.

[@dewatapancing]

sangat memberi wawasan bagi pemula seperti saya 👍 mantap

[@sinduemancing6172]

Josss... Salam.. Suport SINDUE MANCING

[@jayrev5396]

Nice, but I've been usin a uni knot for probably 20-25 yrs now. Never had an issue yet so I'm gonna stick with it lol. 👍🏼

[@sunbutma4285]

Love uni know myself, but when it comes to bigger line dia I go with the FG knot. It is slimmer and goes through the guides better. Especially with micro guides. This does look like it is easier to tie than a FG. Might have to try it. haha

[@spLiffyFOUR20]

@@sunbutma4285 no way, easier then an FG knot?? you can tie an FG knot in 45 seconds. this seems like it takes 5+ minutes to tie.

[@sunbutma4285]

@@spLiffyFOUR20 I'm sure this video was for demonstration purpose so that's why it slower. Already tried it and yes it is fastest and easier to tie than a FG knot.

[@jaxbeach09]

The Albright is better than the uni. It’s stronger and has a slimmer profile

[@andrechevalier8055]

@@jaxbeach09non il y a 2 épaisseurs de fluo

[@samdouglas-henry1026]

When you finish the wraps, then loop the eye back over the fluro, are you not then creating a weak point, because you now have the main line braid cutting into the eye loop??

[@richardj6593]

The next big innovation in line will be the elimination of knots between braid and fluorocarbon and use of a bonding agent and/or a small micro sleeve each line end can feed into and be sealed with heat or epoxy to bond the two lines together. People hate tying knots and a good engineer will put an end to the cumbersome knots. I am working on some innovations now to solve this problem..

[@lornehargis2614]

Seems that by doubling the braid you accomplish the similar task as the FG wraps. Have you thought about cutting the leader before the finishing half hitches ti bury the small tag? Seems the little tag left over could get caught in the guide. Good explanation video. Should take about a minute to tie with practice.

[@koogle612]

If you will notice the tag of the fluoro leader mushroomed you will see its on the back side of the knot (when casting) so it should have no affect on a clean smooth exit. Ive buried the tag myself with alternating 1/2 hitches then the 5-10 whipping wraps & a dot of glue just on the rizutto portion but that is actually bulkier than the way shown. I suppose a solution could be cutting a taper in the fluoro then half hitching up to its end & then the rizutto but then you lose that insurance of the mushroom tip for when the line gets maxed out. Be worth a try just to answer the question though.

[@NechaevDmitry]

My favoutite type of the knot, although my technique is different. This variant seems to be more simple.

[@sammccurtayne7345]

Fg for life

[@Whiteshark1]

It's very nice 🌹🌹

[@FishingknotsChannel]

Thanks brother

[@Whiteshark1]

@@FishingknotsChannel I hope you watch my channel..and tell me what you think about my videos

[@steev927]

This is an FG with double-Uni finishing knot? This is amazing.

[@joedennehy386]

The finishing knot isn't a uni knot it's a risutto

[@maaifoediedelarey4335]

This simply looks like the Yucatan with a Rizzutto finish.

[@chrisuk1000]

Looks interesting, worth a try

[@damiendelacruz2140]

Cool knot and all but did anyone else notice how good the background music is???

[@ThePudn757]

Yea, man! that music is dope! It's my new "getting ready to go fish" theme song 😂😂

[@miltonneliodossantos922]

Bom dia.🎣💪💯👏👏👏👏😡😡Vc acabou de ganhar mais um escrito no seu canal 🎣🐟💪👏👏👏👏👏👏👏👏👏👏 Parabéns 🎣🐟Bora pescar 🎣 Top 🤙🤙

[@WAEofFishing]

This looks like the Yucatan knot you tied with more wraps.....

[@alceualbarellojr9874]

Talvez esse seja o melhor nó para união entre linha monofilamento e líder de carbono. Obrigado por postar. 🙏

[@elikondoshorts4627]

I use FG and SC knot just wanna know which 1 stronger..I got my Cobia 6kg 3 days ago use SC knot..and its a good fight. cobia is strong fish. And SC Knot is great, easy and fast.Recomended. Thanks for this video, and any info who is SC Knot Founder?

[@jeffreyshepherd8838]

A Japanese fisherman invented the SC knot many years ago..!!

[@michaelpigliavento1778]

I used this knot it is strong and it looks harder to tie than it is once you do it you can tie it pretty quick

[@-MandM-Bros]

It’s pretty, but just tie the damn crazy Alberto knot, super quick and easy and never had one fail. Most knots don’t fail, just have better results when tested with weights and stretch systems to test knot strength. No fish will break any of the good ones, your drag will pull before a knot breaks, leader will break before the knot.

[@Starjumper5]

This...

[@justind9235]

Sometimes I wish the knot would be the point of failure, it would've saved me a little braid on a few occasions

[@-MandM-Bros]

@@justind9235 I know. I use leaders a lot against popular opinion. I don’t like stretch even when there are baits that really need it. I just tie my knot and go. They are very small too and goes through the eyes without noticing it. I guess I don’t follow all the rules of thumb. I just prefer braid. That knot is cool just seems like a lot of steps, same with fg knot

[@JunFishing270]

Mantap trik sambungnya

[@KENDORKENCENG]

Nice bre 😁😁👍

[@xanaduorganicgardens]

Brilliant!

[@FishingknotsChannel]

thanks 👍🙏

[@hyunsikhan8490]

Thank you for tip !

[@midwestfischerman]

At 3:33 why not (knot) tie off the tag ends with a Uni Knot with the braid over what is left of the tag end leader????

[@midwestfischerman]

Oh, I guess that is kind of how you ARE actually finishing off the knot.

[@StevenN169]

No knot that takes 7 minutes to tie is what I would consider easy.

[@DONT.BUY.MAJOR.CRAFT-BAD.RODS.]

Great knot.

[@pancingdewata]

mantap salam 🎣🐟

[@John-yt5zr]

Isn’t this also a Yucatán knot?

[@NinoSpinner]

Bel nodo nice knot I'll try it

[@zonarupa5317]

Best video

[@iburry]

An easier to tie FG knot! Cool!

[@YORZTV]

New friend here, nice one

[@roganjosh6793]

That is one busy knot.

[@claudio2312]

Melhor nó que já vi

[@บุญเลิศฟิสชิ่ง]

มาชมครับผม+1ครับ

[@vadoaspinningtv]

Bel video e complimenti per il canale

[@amnaysifaw8387]

the best knot is the easiest one,not a complicated .

[@Nonstophunting12]

تسلم ايدك يا صديقي

[@BillegendFishingChannel]

Easy knot,nice tutorial!! Ηas anyone tryed this knot for heavy jigging game?? Is it trustfull??

[@robertbiermann4666]

Nice fg variation. But I can tie an fg in under 60 seconds. FYI, 100 % is as strong as any knot goes.....soooo....you may want to change the gaslighting title. But good clear instructional vid.

[@jaredraynor9067]

Same here I can do a standard fg in about 1-2 minutes in the boat lol

[@ahmedabdullah8700]

We'll call it. THE SC KNOT or SO CLOSE knot. Smh. FG never let me down and i can tie it on the spot in around 2mins or less

[@RinoJulsafan]

Nice knot

[@FishingknotsChannel]

Thanks

[@casallr7271]

Top demais amigo

[@Janariah-e9i]

Orang orang sudah mendapat ikan sekitar 50 ekor sedangkan saya baru saja selesai mengikat pancing😅

[@heinhendriks8454]

mooi in beeld gebracht supper

[@jimjones6657]

Can this knot be used with different combinations of line sizes?

[@nzzsparks]

I've never had the FG knot fail me. This seems like it's 3 knots wrapped into 1. There is a tag end that will get caught in my guides ( long leaders) . We need a strength test

[@midwestfischerman]

If you have extremely slippery braid in a small pound test you could have an FG Knot pull apart on you. It's happened a few times to me using the Dick's Sporting Goods brand Field and Stream Braid. I like that braid, but that braid DOES NOT like the FG Knot!

[@roltol7539]

tryed that why it slips off ?? there is nothing holding it apart friction, it literaly slips off..

[@blackdogbite]

When do you find time for actually fishing?

[@ryanarmstrong6367]

U don't u make time

[@ilexwang9530]

has this been tested for strength? thanks

[@joedennehy386]

I guarantee it hasn't

[@ilexwang9530]

@@joedennehy386 why so sure mate you never know :)?

[@outdoororiginal4364]

Looks like it would hang the guides. Cool knot tho. Will be using it.

[@mu7f4K_ABi]

rly nice knot!

[@francklugagne2970]

👍👍👍👍👍👌✌️

[@FishingknotsChannel]

👍♥️♥️

[@maisqtoppescaelugares]

VERY GOOD THANKS

[@airtonemanoel5526]

Meu amigo tem no mais fácil que esse

[@Daxi007]

За это время я бы уже завязал пять узлов морковка. Держат не хуже.