the Ultimate RodHolder Base DIY

todays DIY is on How To build a SeaArk Rodholder base from scrap aluminum, I truly hope it helps someone . remember you can build it as good or better than you can buy it
For Fishin N Stuff gear please visit link.below
if your looking for something not listed , leave a message
www.etsy.com/shop/PebsPrettyf...

[@Vincentdonnelly5158]

You should have your own tv show. Great video.

[@FishinNStuff]

I'd just get kicked off TV haha , you should be in a rock band the way you play that guitar. I appreciate buddy . I just think more than those sheeps should be hearing you lol

[@WesLovelace]

Keith...You've definitely got the shop, equipment & know how to create just about anything for a boat!!

[@FishinNStuff]

Thank you brother I appreciate that , means a lot coming from someone that definitely knows a lot about boats

[@benberry703]

Always enjoy watching your DIY’s. They are the best and always keep them coming 👍👍

[@stillinyaisstillinur3300]

I agree

[@FishinNStuff]

Ol man that means allot you saying that , it really does. I work hard on em and I appreciate you watching em and taking your time to leave a comment brother most people don't

[@oklahomaoutlawfishin9026]

I like those rod holder bases. The polish made em shine brighter then a possums grin

[@FishinNStuff]

That's pretty dang brite right there lol , I'm glad I tried it I really like the way they ended up looking

[@oklahomaoutlawfishin9026]

They do look good

[@FishinNStuff]

I was pleased , cause I almost just bought me some cause it's killing me not being about to troll for fish lol

[@lesliemaness999]

You definitely got skills. You're right about Sea Ark. They're very proud of their accessories!

[@FishinNStuff]

Thank you Sir

[@uglyfrog7263]

You amaze me, I can't make anything but I CAN WATCH YOU DO IT ALL! Thank you for these videos.

[@FishinNStuff]

Thank you for watching em and Happy Thanksgiving

[@petercats4779]

Your awesome mate. Put a rod rack that holds 14 on my fishing rooms ceiling. Looks awesome

[@bownero]

Those rod holder bases turned out beautiful! Great job! Appreciate you sharing the video!

[@FishinNStuff]

Thank you. Sir , i appreciate you watching and leaving me a comment brother

[@gregbryant9673]

You did a great job on those bases. Thanks for the video.

[@FishinNStuff]

Thank you Sir , and thanks for taking the time to leave a comment I appreciate it

[@johnprellwitz9004]

You are the man! Please keep doing these videos.

[@stillinyaisstillinur3300]

I'm always impressed with the fine work U do well thought out

[@FishinNStuff]

I appreciate that buddy that means a lot , thank you for watching and commenting

[@jacobthornburgh9582]

Nice vid you always help me save money on boat and fishing stuff

[@FishinNStuff]

I hope it help you save money honestly . There's people who would just as soon buy stuff . Then there's people like us , who would rather make it better and cheaper lol . Thank you Sir

[@fishin-impossible2992]

Dang Keith I never expected those adjustable bases we talked about to look that dang good. At 1st i thought you done built them and chromed them. That polishing made the world of difference. Awesome video Brother. Keep posting these DIYs .

[@FishinNStuff]

I'l keep praying em as long as ppl keep watching em lol . I appreciate brother , they turned out as good as I saw em in my mind and that don't happen much lol

[@casualcarolinafishing5835]

I wish you'd stop making me look so inept.😂😂🤣🤣 They look great Keith! The polished finish really made a difference too.👍💯

[@FishinNStuff]

Yeah you need some a dem rite der Bill lol . Thank you buddy lol , that polish did turn out nice man

[@bobcath5067]

Great craftsmanship its always awesome to be able to make your own things 👍👍👍👍👍

[@FishinNStuff]

Thank you brother , I appreciate that

[@swkynard]

You are very cleaver, enjoy the heck out of your videos

[@FishinNStuff]

Thank you Sir , thanks for the comment brother they inspire me to do better

[@carnufiasfishing8444]

I don't know how you do it brother, but you the MAN! 👊🎣😎

[@FishinNStuff]

You gonna blow my head up lol , go ahead it's ok haha , thank you brother I appreciate your comments they make the hard work easier lol

[@catfishstalker961]

Nice rod holders and a really diggin your shop !!!!

[@FishinNStuff]

Thank you brother , I love my shop . I never built it for KZbin it just turned out that way lol .

[@YourNextCast]

Awesome DIY my friend. You come up with some very cool projects. Nice looking grinder too. Pretty good results. Thumbs up my friend.

[@FishinNStuff]

Thank you buddy I really do appreciate the compliment. I try and be different you see the same ol stuff on KZbin allot , and I appreciate you commenting

[@jenky1044]

Those are awesome. Great show. Thank you.

[@FishinNStuff]

Thank you I appreciate it

[@joebuck66]

Awesome job buddy. Great information and great video my friend.

[@FishinNStuff]

Thank you Sir , it's all about the idea , I love watching DIYS myself cause they get my brain working lol . Thanks for commenting brother

[@mattmoore684]

Great DIY project. Keep the awesome videos coming 👍👍

[@FishinNStuff]

Thank you Sir . And thank you for leaving a comment that means a lot when ppl take the time to tell me what they think

[@glennscatfishing]

Again you got mad skills. I think I hear Sea Ark calling!!!

[@FishinNStuff]

They turned out purdy good huh lol , almost add nice as your rod rack

[@psychonursehomestead9680]

Amazing job brother! Because of you I’m now a Harbor Freight junkie hahahahaha! Great job my friend

[@FishinNStuff]

Hahaha I'm glad you joined the club , lol I appreciate it too by the way . They turned out awesome. I might make me some more if I ever get the time haha

[@michaelblencowe4241]

Great job man! Looks awesome!!!

[@FishinNStuff]

Thank you

[@shonsmith839]

I think we could be best friends. Hahaha. Love all these videos. Lots of great DIYs. Great job bud.

[@FishinNStuff]

We could cause I get along with almost every body lol thank you Sir

[@mitchellhelms7238]

Great videos VERY INFORMATIVE LOVE IT

[@FishinNStuff]

Thank you I appreciate that

[@CoonCreekOutdoors]

Really like the stuff your doing. We have alot in common

[@FishinNStuff]

I appreciate brother , and I appreciate you watching and taking the time to comment

[@txtiger6927]

yep a carbide tipped skill saw will cut right thru al, some times spraying or brushing a little lube on part and cutting tools will help with chip smearing. great video....scotch brite discs polish well also

[@FishinNStuff]

Thank you brother . Your right the scotch brite disc do work great too . We use those at work . I appreciate you watching and commenting my friend

[@catfishstalkeroutdoorswith530]

Awesome video again!

[@FishinNStuff]

Thank you brother I appreciate it

[@trophyhunter8615]

Awesome job buddy

[@FishinNStuff]

Thank you Sir . I appreciate it brother

[@kipwright148]

Digging the harbor freight tools. Seriously they work for EVERYTHING I need and very affordable. Planning on getting a HF chest for my HF tools. Thinking I like the green one👍

[@FishinNStuff]

Yep those new green tool boxes are sweet . I bought the husky box from Home depot. It's a little cheaper for what you get but the reviews say the HF boxes are a little tougher

[@brent.hallman4772]

Spray your saw blade with wd40or cutting oil. It extends the life of your blade and it's less clean up. I've been a fabricator for 25 years and I enjoy watching your videos. Keep up the genius ideas. I've built a few of your diy projects myself

[@FishinNStuff]

Thank you Sir I appreciate it . I learned the hard way that WD40 work well on aluminum on the Cleat mount hold rack I made lol . The hard way lol

[@kencleg7721]

Did the night light pvc holder Good stuff

[@malcolmzoll7613]

Great job

[@FishinNStuff]

Thank you brother I appreciate that

[@WildBillFlysRC]

All this polishing reminds me, I have half the bottom of my Starcraft to finish. Interesting buffing pads! I might have to look for some

[@FishinNStuff]

Thank you brother , those felt flap disc worked really good and they were a lot less messy than the grinder with the cloth wheels . I can see myself buying some more

[@sc4670]

You sir are an inspiration, just found your channel and its awesome. Bar soap or a shot of wd-40 will keep aluminum from building up on your chop saw blade. Matt 4:19

[@mudpuppy30816]

awesome 👌

[@sailingddcircumnavigation5931]

Awesome

[@itowmyhome797]

Thank you

[@HotMusicEverOK]

I subscribe you because you are great man thanks for your videos sharing

[@FishinNStuff]

Thank you brother

[@kencleg7721]

That would work I like it

[@caseychristopher637]

Great channel and content man. Dropped a like and a sub. Looking forward to checking out some more of your stuff.

[@DannyWalker1949]

I LIKE 👍👍👍👍

[@jarrodkoss]

Make some brackets for rod holders that fit on a Bennington pontoon boat. they need to fit behind the seats on a 20ft with all the seats in it!

[@FishinNStuff]

I'l try to find one to measure , but that's a good idea , for all those pontoon catfishing guys out there , thank for watching brother

[@danratsnapnames]

you may want to paint a clear coat over those aluminum parts.. they will turn cloudy after a few days if you dont.. this is because aluminum will oxide in the presence of oxygen. you can also anodize them to prevent them from oxidizing.

[@FishinNStuff]

Your right mine still look pretty good after a year , but it's only because my boats stays in a building

[@lugnutzz75]

Shiney!!!

[@FishinNStuff]

Heck yeah who don't like shiny haha

[@guyh.4553]

Cool! For what you saved making the rod holders you could afford the press! Ha ha ha 😁 😂 🤣 I particularly liked the 90° angled ones, pretty handy. Any thoughts on making the wider? Just for stability sake in the channel rod? One thought that I had was to paint these with the rattle can truck bed liner. Great video

[@FishinNStuff]

Your probably right , those adjustable rodholder bases are pretty expensive

[@blakerhodes8856]

I'd like to see you actually make a rod holder for boats that you use these bases on

[@FishinNStuff]

I bought some stainless steel rod a couple of weeks ago planning on doing that lol . The plasti dip is high by the gallon may had to spray em but dipping will look better

[@blakerhodes8856]

@@FishinNStuff I want to build some myself just can't come up with no ideas and I've yet to find any videos on KZbin of any being made to get ideas. I love watching your work I have it set up so when you post I get notified. Keep up the great work!

[@FishinNStuff]

Man I really appreciate you saying that brother , I means a lot to know people really like it and I'm not do em in vain , cause you just make a video and don't know if your doing it right sometimes . Or if ppl enjoy or benefit from it . Sho thank you neither , and about the rod holders I've thought the same thing , there's really no videos about making em on KZbin, so ive been planning it out and thinking about it . But it's hard cause ive never tried it and there's nothing ti go by but my own ideas lol . It'll be coming soon

[@jpmorgie]

How about a video where you add a trolling motor off the side of a kayak? I need ideas on how to get light but effective battery to power the trolling motor. I’ve seen a couple on KZbin, but I’d like to see what you come up with.

[@FishinNStuff]

I've thought about that

[@myadventureoutdoors]

Sweet polishing. Will it stay that way? I want to see those rodholders catch some fish.

[@FishinNStuff]

I think it should stay that way on my building kept boat lol . I hope I can show you some fish now that i got some rod holders on the boat lol

[@joesephblanks8710]

Man your good.

[@FishinNStuff]

Thank you brother , and thank for taking the time to leave an awesome comment

[@joesephblanks8710]

@@FishinNStuff Man your stuff is cool down buying stuff to make rode holders now. Always a open set on my boat if u want to fish lake Michigan Salman

[@FishinNStuff]

I really like the way those Adjustable bases turned out , and they weren't to difficult to make

[@joesephblanks8710]

@@FishinNStuff right I'm going to do the one that goes in a set mount and try in come up with something to put a couple rides towards the nose of my boat it's 19 foot supper sport Sylvain. In board 3.0 . Me and my nephew love fishing he wants to go on a trip cat fishing . And got a big one. We do a KZbin channel it's small but we are trying check it out give use some feed back . Is is dakota joe . Key word tippy dam

[@tagreen9790]

Great work, just one question, how is the best way to attach to a tracker , would like to do a track similar to your boat, thankx!! keep up the good work!!

[@FishinNStuff]

Not sure some of the kayak companies make pretty good tracks , that base there you could use without a track if you wanted it would make the rod holder adjustable right and left and up and down . Someone else asked if I'd do a video on making a track system

[@FishinNStuff]

By the way did you mean a tracker boat or to install a track , I might have read it wrong or just misunderstood

[@tagreen9790]

Some kind of track system, when I get home, I will take some pictures of it for you

[@geraldqualls1369]

You're a jack of all trades my kind of friend. What kind of blade is on your chop saw ? It does a lot better the cut off disks I have on mine. Tkx keep videos coming

[@FishinNStuff]

You have to buy the whole saw , it's a cold cut saw , the reason you have to have the saw itself is because it turns less RPMs than a regular wack saw or a compound miter saw. But yes Sir it's a awesome saw . The blades aren't that cheap but they last a very long time as long as you don't cut hardened steel like I did and have to change it lol . I'll find you a Link

[@FishinNStuff]

There's the link to my saree buddy I appreciate you watching brother Evolution Power Tools RAGE2 Multi Purpose Cutting Chop Saw, 14-Inch www.amazon.com/dp/B000WEORGM/ref=cm_sw_r_cp_apa_i_Fpc-DbQWEA12F

[@jasonscruggs986]

Where did you buy ur polish wheel for the grinder and what kind of polish do you use? Thanks for the video you are very talented

[@FishinNStuff]

I have a polishing wheel for my big grinder , I assume your talking about the one I used in this video , you just go on Amazon and put in felt flap disc . And the polish I used I Just picked up at harbor freight , they have like 5 different kinds . It tells you on it what it's for and what metal it's for I was using the black and the green

[@TheReelFishermen]

Dam right, those are sexy! Well published video.

[@FishinNStuff]

Thank you buddy , iI really like em . Now maybe I'll finally get to put a fish in the new boat lol

[@billyallmon5039]

Can you make the v holders that keep the rods from sliding down the gunalsfor pulling for crappie

[@prestonfrady9259]

Hey brother still patiently waiting for the diy fishing cart for land fishing lol.. I kno youll gwt ro it whwn you can iust messing with you

[@FishinNStuff]

Buddy ive got your idea on my list I promise lol , my problem is c I've got about 35 ideas on that list lol . And I try to do em when ive got my plan right and I can do em good I research everything I do and tru to do my best im usually working on several videos at once , that's why sometimes I'll miss posting one . The better I try and make em the harder it gets haha i try and be didnt and not copy other people you know . But don't think ive forgot ive been trying ti figure out how to make a drift sock video for a couple of guys a while lol it keeps not working out lol .i appreciate every subscriber I got buddy especially the ones that take the time to comment like you doi

[@prestonfrady9259]

@@FishinNStuff i know brother i was just giving you hell lol.. Keep doing what you do

[@FishinNStuff]

@@prestonfrady9259 I know man I just wanted you to know I got it on my to doi list haha

[@geraldqualls1369]

Where did you get the polishing wheel for your grinder? Tkx

[@FishinNStuff]

I got it at Harbor freight , I go into more detail about the polishing and what I use on the Balsa wood planerboard video

[@andrewmolina1617]

That looks a lil sketchy. I aint going up there.... Haha!

[@FishinNStuff]

It did !! Haha . I'd hate to get buried in an avalanche of steel lol . I couldn't help myself I thought it was funny lol

[@DanielaGarcia-yy5hb]

Can you make a DIY Downrigger locking base video please?

[@FishinNStuff]

I've never really looked at one

[@DanielaGarcia-yy5hb]

@@FishinNStuff these are two kinds I thought were pretty cool: kzbin.info/www/bejne/ZnTKm6Rvl96gZq8

[@DanielaGarcia-yy5hb]

kzbin.info/www/bejne/maWrkmqfiraZhtE

[@DanielaGarcia-yy5hb]

@@FishinNStuff kzbin.info/www/bejne/m5OZZ6uEq5pgbdE

[@ctmconstruction7931]

Are you in kings mountain NC

[@jamesr.riverasr.4678]

Where do you get the t track?

[@FishinNStuff]

The track came on my boat

[@Rafael-mw4vd]

Any DIY ideas for pontoon rail rod holders by chance.

[@FishinNStuff]

I've never done that video yet but I may have too do it , where you live at

[@Rafael-mw4vd]

Texas

[@FishinNStuff]

That's far lol , well I'll try and come up with something buddy . I'm sure I can find a pontoon boat some where

[@Rafael-mw4vd]

Thanks and keep up the DIY’s.

[@FishinNStuff]

@@Rafael-mw4vd thwack you for watching brother

[@bazman666]

Where do you buy your black and red rod holders ?

[@FishinNStuff]

On monster rodholders web site , on the Rodholder DIY video I have the link in the description box

[@bazman666]

@@FishinNStuff awesome thank you

[@FishinNStuff]

I'l help you any way I can , and thank you Sir for watching

[@randyshaffer7257]

Who made the rod rack running across the back

[@FishinNStuff]

SeaArk

[@randyshaffer7257]

Looking for one for my LOWE 175

[@FishinNStuff]

Watch this one kzbin.info/www/bejne/h3jPdqJtrLCrfbs

[@Chris-ei7iz]

Like all the diy he does wish he would do a diy a none drilling rod holders thats adjustable for a pontoon boat railing

[@FishinNStuff]

I'll try and do one as soon as i find a test subject near me lol

[@kriskeith1366]

How much you charge for your stickers

[@FishinNStuff]

It's all lost on this link . My wife does that stuff . KZbin and work keeps me busy brother . She lost her job a while back so she takes care of that part . You can message her directly on there if you have a question or want something different buddy www.etsy.com/shop/PebsPrettyfuls?ref=search_shop_redirect

[@davids7476]

Good work, looked sharp. ................BTW, beginning to hate fishing out of a kayak. I see why you have the boat now. Cost too much especially when you flip and lose about $450 worth of gear including part of your kayak. Then to add insult to injury have a game warden write you a warning for using the spillway dam to stand on and upright your kayak for reentry. Going to have to make the leap and look at a nice aluminum boat, darn kayak is really starting to cost a bunch. Better yet should have listened to the Lord and been working instead of fishing that day, lol, had other obligations I have been putting off and I got what I deserved for playing before working.

[@stillinyaisstillinur3300]

Did U catch anything

[@FishinNStuff]

Im sure the Lord don't mind you fishing he helped Pete and John catch fish haha . I love my Kayak too but there's nothing like a boat either , I like em both but the older you get the nicer the boat becomes lol

[@davids7476]

@@stillinyaisstillinur3300oh yeah, caught a bruised ego, and a yellow slip of paper

[@stillinyaisstillinur3300]

Darn Law do let people have fun any more

[@FishinNStuff]

Yeah I hate that , and that game warden may have been right . But sometimes they can be jerks . Sometimes circumstances should be looked at though

[@prestonfrady9259]

1st comment btw

[@FishinNStuff]

You awesome brother 👍

[@johnsain3117]

Sell them on eBay and save you some money and make some

[@FishinNStuff]

I would but between work and doing KZbin videos which I love , I hardly have time to go fishing any more lol . I appreciate you watching brother

[@johnsain3117]

No problem I’m from lincolnton

[@FishinNStuff]

Awesome your just right down the road from me