(FIX) Pit Bike Clutch Problem - No Slip, But Won't Engage!! Pull Lever & DOESN'T WORK

We dig into the clutch problem on the ssr 125 pit bike. The clutch didn't slip, but it would not engage at all and would stall when taking off and in gear. We disassemble the clutch pack and find the problem and fix it. This happens on pit bikes, dirt bikes, and atvs. When the plates do not separate, the clutch does not work properly. This is caused by bad oil, worn clutch basket fingers, or cable out of adjustment.
Thanks for Watching a MMO Video!! If You Enjoyed, Consider Hitting the Subscribe Button and Clicking on The BELL!!
Need Gear for All Types of Riding? Check out Klim! The best of the best for all seasons!
www.klim.com/?rstr=3brothersr...
#pitbike #clutch #clutchfix #dirtbike #atv #howto
Check Out Products We Use:
*Snowmobile Grips
amzn.to/3Fvv3fB
*GoPro Batteries
amzn.to/3pr9NSD
*ATV Grips
amzn.to/3Ez3xNe
*Pit Bike Carburetor (Better Performance)
amzn.to/3Fv4Pd8
*Dango Designs GoPro Mount
amzn.to/3FoNVgi
*SC1 Gloss Coating
amzn.to/32C9sU4
*Pit Bike Tall Seat
amzn.to/3pAdVQB
*Fuel Filters
amzn.to/3sznHEo
*Pit Bike Racing CDI/Coil
amzn.to/3FwhIDP
*Pit Bike Air Filter
amzn.to/3EysurK
*Dirt Bike Grips
amzn.to/312kguq
* In-Line Spark Tester
amzn.to/312cKja
*TRX450R Lowering Link(Front and Rear)
amzn.to/3462B6n
*Customizable Pit Bike Graphics Kit
amzn.to/3EBFfSL
*Pit Bike Exhaust 28mm
amzn.to/3EuKT9b
*Purple Panda GoPro Microphone
amzn.to/3FAbyCE
*Follow Us on Instagram / mickeymouseoperations
*Main Crew Featured in Videos:
-Sparky
-Cleetus AKA Ski
-Kaleeb
-Spike
*Others That Are Featured In Our Videos:
-Ky
-Rayman
-Caster
-Hahndo
*Wisconsin
*Snowmobiles, Quads, Bikes, & MORE

[@master7135]

So my clutch in my lifan 125 swapped atv the engine is brand new so the clutch and oil is to but it slips bad and i have the lever adjusted to the width of a coin and the line is brand new also but i cant seem to get the asjustment on the nut correct on the thing under the cover help

[@markbello868]

Do you have the link to the special tool

[@mikesmotoshop]

Gotta love sticky clutch plates

[@joshuamcalpine3648]

I got a similar situation but the 4 Phillips head screws are in there really tight, I used and impact driver to try n get them out nut they wkny budge even tried if they're left hand threads

[@bearkreekboys]

They are normal thread they can be tight!

[@wadesoutdoors1914]

I just a project 125 . Just wondering if any one has had an issue of there bike not engaging into gear .?It’s like it’s always in neutral .

[@Jameswrigley09]

Mines opposite atm

[@DavidBosse-hk5rs]

My 110 cc bike clutch is messed up same problem as u except when I tighten my clutch cable the bike won’t start😊

[@lukescavo8511]

3:56 can anyone tell me what this part is called that he is pushing on

[@just_in_time5518]

Good how to video boys!

[@michi_danksta]

Lmbo. They left out the how to.

[@growgang_lc1978]

I have a Tao Tao DB10 110cc, and I THINK it’s having clutch issues?.. Starts up fine, can scoot around no issue, but occasionally it just doesn’t wanna “Go” is the best way to put it. It doesn’t overrev or bog out or anything.. it just doesn’t seem to have the same power it usually does at a certain throttle. (It’s an Auto Clutch, with only a forward gear. No neutral, shifter, or clutch lever)

[@bearkreekboys]

I think there's an adjustment on the right side ? Might be info online or other KZbin vids for the auto/centrifugal clutch

[@growgang_lc1978]

@@bearkreekboys you’re correct, clutch adjustment bolt is on the right side of the case on the Tao Tao. And oddly enough.. I just noticed there’s a little fluid leaking out from where that bolt is.

[@luiz-mg8yw]

any tips mine takes off even with the lever in, i have the clutch lever fully adjusted it don’t get any tighter, i have both adjusters on the lever and cable it’s still takes off with the lever in

[@bearkreekboys]

Disassemble and check all components something is not allowing the clutch to release. This could be stuck plates and disks. Thats how mine was. May need a new clutch very cheap parts

[@luiz-mg8yw]

@@bearkreekboys thanks for the help i’m pretty sure something is rusted out inside or something like dat, the top end was locked up had water in it

[@bearkreekboys]

Yup clutch is probably stuck

[@leelafarlett3535]

mine takes off with lever in or out. Worked fine the other day, till I took the cover off and noticed a circle ground on the inside of the cove. Fixed that but now no clutch... dunno. Help

[@andrewbaldwin8477]

Why will mine now start I used starting fulled

[@colins_fishing9762]

Hey I just bought a used Chinese bike from a buddy and it will shift though gears but it will not go into neutral I striped the engine and I can’t figure out why it won’t go into neutral. Any tips on this problem?

[@colins_fishing9762]

It is a semi automatic coolster

[@kennonjohnson4927]

Did you replace the disks that were stuck completely or just clean them up?

[@bearkreekboys]

Cleaned them has been great ever since

[@kennonjohnson4927]

If you don't mind me asking, what did you do to clean them up? Sorry if i'm asking to much.

[@bearkreekboys]

We used a somewhat gritty grinding pad on an impact tool. It worked great, beats using a file of some sort!

[@fatbongripz4207]

hmm....i am having the same thing happen on my Venom X20. Brand new. Mine can shift between gears without holding the clutch in. and does the same thing lurches forward when clicking into 1st. I will see if i can get Venom motorsports to send me a new clutch...if not then Amazon here i come......

[@bearkreekboys]

Sounds stuck plates to me

[@SudoFed41]

How did you stop the clutch from turning when using that socket

[@bearkreekboys]

Impact wrench

[@pitbikesteve]

The spring inside the actuator top hat looking metal barrel thing inside the bearing on the front of a pitbike clutch dosnt seem to do anything because when the spring is pushed in it dosnt push anything on the other side of it.the spring just pushes inside the actuator so I can’t see how it does anything.

[@beautummers]

Thats what i thought to it doesn’t push anything

[@beautummers]

You figured is out?

[@lukey2165]

my bike registers that its in gear when its not and the clutch isnt helping when ever i pull it in it does nothing

[@JNemRar]

Is it a problem if I use liquid gasket instead of a proper gasket?

[@bearkreekboys]

Your choice just have to be careful

[@nickcretella1]

I have a 450r 2004 and whenever I try to put it into first it stalls. Any suggestions?

[@bearkreekboys]

Your clutch plates are sticking or basket is grooved. Try blipping throttle and then pull clutch in and shift. May be time to remove clutch cover and inspect

[@nickcretella1]

@@bearkreekboys thanks! I saw the plates did move with the cover open. Everything seems to be working as is and the grooves aren’t really that bad. I ordered new plates anyway I’ll let you know what happens

[@lonewanderer958]

What if im missing 1 clutch spring? Please answer

[@bearkreekboys]

May not work correctly

[@danrowlands3705]

So in a sense u didnt film the most crucial parts

[@bearkreekboys]

Correct

[@TheYooperguyslife]

I’m having this problem on my 2019 Taotao 140cc runs and idles good pull in clutch and click into gear and just dies like the clutch isn’t pulled in! Need help!

[@bearkreekboys]

Need a clutch most likely had this on our tao 140 try adjusting if not its new clutch time

[@TheYooperguyslife]

@@bearkreekboys I told the cover off and looked at everything looked all clean. The kid before me said it sat so I’m hoping maybe the clutch plates are just stuck i have everything g in new oil will let ya know if anything changes

[@bearkreekboys]

Yes they could be stuck take the plates apart and clean them and soak

[@TheYooperguyslife]

@@bearkreekboys okay! One more question does the 125cc cover gasket fit for the 140cc they look identical just didn’t know if the cases were bigger

[@bearkreekboys]

I think they may be different. Not 100 percent but I thought the shape wasn't quite the same

[@deanstevenson2780]

Your float is stuck that is how you're getting gas in h your crank adjust the screw on the bottom of your carb and turn your gas off when your not riding

[@stormzxmarshmello3912]

What's the name of the special tool

[@bearkreekboys]

Ebay clutch removal tool for Pit bike

[@tynanhobson7748]

What’s the socket called

[@bearkreekboys]

On eBay! Pit bike clutch socket

[@tynanhobson7748]

Thanks 🙏

[@tynanhobson7748]

Also I noticed you said that it was oil, is that fir 2 stroke or is transmission fluid in there

[@DavidBosse-hk5rs]

No compression

[@DavidBosse-hk5rs]

Sticking clutch plates maybe?

[@bearkreekboys]

So it doesn't turn over or the clutch doesn't actually disengage the friction plates?

[@DavidBosse-hk5rs]

It turns over and starts when the clutch lever is depressed

[@DavidBosse-hk5rs]

When it’s pressed I have no compression

[@DavidBosse-hk5rs]

And it won’t start

[@AGGYTAKEOVER]

That nut with the little adjuster is too far out

[@bearkreekboys]

Good try but those plates were rusted together

[@AGGYTAKEOVER]

@@bearkreekboys yeh i saw all way through 🙄🤣 note to self watch the full video 1st 🤣 i had the same problem but was the little adjustor thing and was ok but cant seem to find sweet spot it sometimes comes off and have the same issue where its engaged but not working put lock tite on and everything just seems weak. The hub did snap though right off the rear wheel send the chain into flywheel housing so thats non existent and as that happened think it like locked up the clutch in process made it weak

[@bearkreekboys]

@@AGGYTAKEOVER oh wow!!! Sounds like fun loll

[@AGGYTAKEOVER]

@@bearkreekboys i fixed most of it just got flywheel cover to get now

[@malcolmkeane7098]

wasn't the point of the video to show what you did instead of just talking about it