I have multiple serious chainsaws, but one of my favorites is my little Mac 3216, identical to yours. It is well over 20 years old yet still runs and cuts great. I recently rebuilt the carb for the first time ever because it wouldn’t idle properly or hold a tune. The metering diaphragm was a bit stiff just like yours, and so I easily replaced it (for $5). Afterwards it idles and revs perfectly again. These little old obsolete 32cc Home Depot McCullochs are still bulletproof little workhorses. I bought mine new for $89 22 years ago and its been through several 9”, 14”, and 16” bars as well as multiple chains, doing the dirtiest jobs on my 8acre wooded property. It just keeps on begging for more, and has been more dependable than my Stihs or Husqvarnas. It is my light-weight, go-to, never-let-me-down saw for stump grinding, limb-trimming and even tree felling. I would’t sell mine for all the money in the world. For $10 you got a real “steal”. Dr. K.
@HomeGaragechannel Жыл бұрын
nice, it's great to get some Long term insight on them.
@thomaswilson52284 ай бұрын
@@HomeGaragechannel Own 2 MS1435"s (38cc"s) . These are GREAT saws! another weakness can be the bar studs stripping out. try not to over tighten them as replaceing them has you dissasembling as you did in this video. obsolete now parts can still be found on ebay for these. paid $79.00 new for 1 of mine at menards some 20+ years ago. Yes, I have a large stihl, but prefer the macs.
@markanthony698 ай бұрын
After seeing dozens of videos, searching for hours on the net, ordering a new carb, and disassembling my carb 100 times. Your video showed me my problem. I had replaced my hoses and installed them wrong. ****Thank you!!****
@HomeGaragechannel8 ай бұрын
no problem and I'm glad it worked out for you
@askoneslkman Жыл бұрын
the part that did me right is how the fuel line goes to the carb first and then the primer bulb ! good details !!!!
@HomeGaragechannel Жыл бұрын
thank you!
@mrjohnnyhogg2 жыл бұрын
My local repair shop told me it would be a six week turnaround to fix my chainsaw. As I was walking out the guy looked in the gas tank and said the fuel lines were trashed. I asked if was an easy fix and he said not really. I found this video, bought parts from the local shop and in a couple of hours later my saw was running. This video helped tremendously. Be careful with the throttle trigger when taking the case apart! Take pictures because it will fall out.
@HomeGaragechannel2 жыл бұрын
thank you JRM.
@rjackconley2 жыл бұрын
What a clear and concise video.No unneeded comments or information that is not relevant to the problem. Clearly one of the best I have viewed. Thank you for your time and for sharing your expertise.
@HomeGaragechannel2 жыл бұрын
Glad it was helpful!
@peelypeelmeister64322 жыл бұрын
Murphys law. I got just enough out of your first video to figure out with trial and error how to put it back together. The next day this came up. Very happy to say that my chainsaw started first pull. Thank you, thank you, thank you. There is an army of head scratchers out there that will be most grateful for your tutorial.
@HomeGaragechannel2 жыл бұрын
no problem, I appreciate the comment.
@billboswell45092 жыл бұрын
I can’t imagine how you could have improved this excellent video. Manuals are near impossible to find online and this was the only place I found telling me where the fuel lines go. Thank you for such a useful video.
@HomeGaragechannel2 жыл бұрын
Glad it was helpful!
@russellsvideos1042 жыл бұрын
Thanks for your video. I have an old McCulloch chainsaw unused for many years. The fuel ines had pretty much disintegrated. Without your video it would have been challenging to fix. New fuel lines as you described and it is working like a treat. Thanks
@HomeGaragechannel2 жыл бұрын
I'm glad you got to working again. thank you Russell and Jackie
@lionsdenaudio4 жыл бұрын
My Mac 3200 saw ran a few seconds and then stalled. Would not stay running. Carb seals looked ok. Found main fuel line brittle and snapped at entry to fuel tank. Replaced all fuel lines, carb foam filter, and start primer plunger. Now saw is running fine. Very clear, helpful video and to the point. Was going to throw away my saw but keeping it now. Repair cost: $8 with Amazon kit and 1.5 hours work. Thank you!
@HomeGaragechannel4 жыл бұрын
You're absolutely welcome and thanks for the comment I appreciate it
@toddbarney4738 Жыл бұрын
Excellent video! I have an old MS1635 with the CS38 engine. Wouldn't start and I just stuck it on a shelf and have been using my Echo 14". Finally thought I would try to get the McCulloch started, and found broken fuel lines (and oiler line) everywhere. This video is EXACTLY what I needed to understand what to do next. Thanks!
@HomeGaragechannel Жыл бұрын
Glad it helped!
@onesadtech2 жыл бұрын
Excellent series, for anyone wondering, a Power Mac PM 145 appears to functionally be the same saw under a different name, as I used this series to redo all the fuel lines on my PM 145 with great success, saw is finally running again after all the lines fell apart when I replaced the primer bulb. 😂 👌 Thanks for the awesome video Home Garage!
@HomeGaragechannel2 жыл бұрын
Thank you One Sad Tech, I appreciate it!
@kevinkelly1529 Жыл бұрын
I always dread replacing chainsaw fuel lines. Your video reinstills confidence to do it myself rather than take it to the repairman.
@HomeGaragechannel Жыл бұрын
thank you Kevin Kelly
@rsh69944 жыл бұрын
Excellent video, professional and to the point. No silly theatrics. Thank you sir!
@HomeGaragechannel4 жыл бұрын
Thank you for the comment I appreciate it
@daddygamer5755 жыл бұрын
TYVM for this Video. Even a small repair shop wouldn't try to fix my 3516. Said parts to difficult to get. What a joke. I ordered the parts replacement on amazon. Arrived in 2 days. Used your video to replace lines and diaphragms. Starts and Idle on first try.
@HomeGaragechannel5 жыл бұрын
Excellent work. Thanks for the comment I appreciate it
@robertwaller94883 жыл бұрын
Outstanding video. It's exactly what I'm going to do. Because I'm not mechanically inclined, perhaps in future, identify the type and size of tool being used and the size of the fuel line. I got my parts i.e. fuel filter from the small engine repair shop. Had no idea McCulloch was sold years ago to Husqvarna. Thanks again !!
@HomeGaragechannel3 жыл бұрын
thank you Robert Waller, I used to state the tools I used and other pertinent information but the problem is that there are so many variations of the same equipment that they are not uniform. So what I end up with are angry messages saying I stated the wrong tool. So I leave it up to the viewers to make that determination themselves.
@zensempai73714 жыл бұрын
I got give a free chainsaw identical to this one, all fuel lines broken and primer bulp rotted . Thank you for the perfect guide to repair
@HomeGaragechannel4 жыл бұрын
Thanks for the comment I appreciate it
@alexanderbrown298220 күн бұрын
Thank you so much, I bought a used one that was destined for the scrapyard and I was able to rebuild it using this video. I really appreciate it.
@HomeGaragechannel20 күн бұрын
no problem and thank you for the comment
@warrenmeek36633 жыл бұрын
Just found this April 2021. Perfect solution for me! Many Thanks for your clear even paced video. For others, I cut my gas line the right length. I would have cut it another 1" longer to make it easier.
@HomeGaragechannel3 жыл бұрын
No problem and thanks
@PropagandaFacts2 жыл бұрын
i'm a couple of years late on this post but i'm glad i found it... needed the clear, undisturbed direction you delivered. thank you.
@HomeGaragechannel2 жыл бұрын
Glad it helped!
@johnjohnson51505 жыл бұрын
Great informative video without the nonsense and theatrics. Helped me to repair a friends saw! Thank you very much!
@HomeGaragechannel5 жыл бұрын
Thank you John Johnson for the comment I appreciate it.
@og-greenmachine86233 жыл бұрын
Right?😃
@L4NFE4R3 жыл бұрын
Excellent tutorial! Perfectly paced, well lit, and well detailed. I was able to get an old and used MAC to run again.
@HomeGaragechannel3 жыл бұрын
fantastic. Than you Jason Porter
@paulvargas14442 жыл бұрын
ZS
@arjaysmithjr90833 жыл бұрын
Thanks. I have that exact chainsaw, and I haven't used it for about ten years. Which is the last time I went through this same drill, but I had to replace the primer bulb. I recall I got the lines bass ackwards that time too. It's been a great little chainsaw for the few times I've needed it. Thanks for the memory refresher!
@HomeGaragechannel3 жыл бұрын
Glad I could help
@Dom-pf8wd2 жыл бұрын
Awesome!...You da Man!....I just took out my dad's 2002 18" MS1838AV/CS 38 Em that was used probably once and has just been sitting all this time (19 years) to find the purge bulb just crumbled when pressed and after further inspection so had the fuel lines and air filter.I've only become a "handy" diy'er later in life thanks to videos like yours.Now if I can only find all the correct parts online and duplicate what you did here I'll have a practically new chainsaw and can stop struggling with my Remington electric 10" pole saw.Thanks!!!
@HomeGaragechannel2 жыл бұрын
Thank you Dom and good luck finding the parts.
@Dom-pf8wd2 жыл бұрын
@@HomeGaragechannel Thanks again!...and again.....and again...I just replaced the fuel lines and primer bulb and she's running like a champ (other than a slight stall in the chain rotating after pulling the throttle trigger, but I can live with that for now), but I did notice the oil line was also missing.I put it away for the night and saved some videos to watch tomorrow that may (or may not) help, but just curious if that oil line is the same size as the fuel lines and is it as "easy" a fix or will there be more complications accessing it and replacing it?
@johnwunderl97403 жыл бұрын
The best instructional video I’ve seen yet. It allowed an ignoramus like me to replace the fuel lines successfully. Thank U so much👍
@HomeGaragechannel3 жыл бұрын
No problem and thanks for the comment
@mrrutledge19675 жыл бұрын
Thank you. Very relieved to find a no nonsense repair video.
@HomeGaragechannel5 жыл бұрын
Thanks for the comment I appreciate it
@dirkayala58125 жыл бұрын
I'm pretty sure I picked up this same model used bout a week ago. Used it once then some trouble keeping it running after I added new fuel this weekend so I really appreciate this vid as I may need to do some minor tuneup work. Great vid & Thanks!...
@HomeGaragechannel5 жыл бұрын
Thank you Dirk Ayala for the comment I appreciate it
@anthonyharper81614 жыл бұрын
Check air filter too...
@bearhogg3 жыл бұрын
this video was very informative because I got a 3200 coincidentally from my uncle and I have parts arriving and tomorrow for it and thank you for great content and your videos are always helpful for when I'm fixing something and need a reference for it.
@HomeGaragechannel3 жыл бұрын
No problem Bear Hogg and thanks for the comment I appreciate it
@ds39303 жыл бұрын
I was clearing out my dads barn 2 months back and found this chain saw buried in the back in its black case. The bottom was full of chain oil where the seal gave out. It’s been there for nearly 20 years. Today I couldn’t get my Stihl 290 to start so I thought I’d give the Maccat a shot. It started right up.
@HomeGaragechannel3 жыл бұрын
wow nice. what are you going to do with the stihl?
@ds39303 жыл бұрын
@@HomeGaragechannel I was think about sending it to a repair shop but the maccat was so much more lighter and comfortable to use, I wonder if I just need to “retire” the stihl.
@aflatminor3 жыл бұрын
Smashing job!! I have two 14" Macs and two Mac hedge trimmers that have (From memory) split fuel lines, Watching this video has made me want to get them out of the shed and fix them!!, Many thanks for a great npair of informative vids 👍😎
@HomeGaragechannel3 жыл бұрын
hope it works out for you
@sl89653 жыл бұрын
Thank you! I watched a couple other videos. Yours was very well done! Good pace, clear, good explanations and good video shots. Very helpful!
@HomeGaragechannel3 жыл бұрын
thank you SL for the comment I appreciate it
@cameronhank24613 жыл бұрын
Great vid no stupid nonsence like talking for hours n not helpibg or explaining. U did a to the point tutorial and we appriciate you!
@HomeGaragechannel3 жыл бұрын
thank you Cameron Hank I appreciate that.
@victorvondoom84103 жыл бұрын
I just found a mc culloch 839 under my stairs and I was delighted as I had just gave my old chainsaw to my local Lawnmover/chainsaw mechanic who rang me to say the chainsaw was no more good when I went to use my new chainsaw I discovered the primer pump was in bits it could only happen to me if it wasn’t for bad luck I’d have no luck but your video has restored hope I can get it fixed it’s practically brand new
@HomeGaragechannel3 жыл бұрын
Good luck with it and thanks for the comment I appreciate it
@victorvondoom84103 жыл бұрын
I’m delighted I found your KZbin channel I scrolled through some of what you already posted so I have plenty to watch
@HomeGaragechannel3 жыл бұрын
@@victorvondoom8410 excellent. Thanks again
@johnclarke66473 жыл бұрын
I just got through doing the same thing to a MAc 3216 that I picked up several weeks ago. I also did much of the same things you did to your little Mac. One word of caution when working on the pto side. I cleaned the sprocket and lubed the sorocketbearing but I must have been a little careless with the grease on the sprocket bearing because some got on the crankshaft and the clutch would not seat on its tapered part of the crank. I had to take it apart and clean up the clutch and crankshaft with break cleaner. It then seated, properly, and turned the sprocket. I did rebuild the carb, a C1Q, Zama, while I was at it. I now call it OPC, for One Pull Charlie. One problem I had with the 3216 was the idiot that had previously owned it had replumbed the fuel lines and had them all wrong. It is correctly plumbed, now.
@HomeGaragechannel3 жыл бұрын
Nice work John Clarke and thanks for the tip
@frankk516 Жыл бұрын
This video helped me with my chainsaw repair, my fuel lines became hard and broke in storage. Thank you
@HomeGaragechannel Жыл бұрын
no problem!
@jerrybailey95612 жыл бұрын
The wire to the kill switch also has grooves that they go through. I found out the hard way. Thanks for the video. Easy to follow, plus I had to take the fuel tank off to change the oil line Under the tank.
@HomeGaragechannel2 жыл бұрын
no problem and thank you Jerry Bailey.
@dirgemcelvoy2583 Жыл бұрын
Thank you for a step by step repair, I have a Talon ac3100 but is identical in the fuel area. Much appreciated.
@HomeGaragechannel Жыл бұрын
Glad it helped
@tizme61058 күн бұрын
Thanks for this video about the hose replacement on your Mcculloch 38cc saw. The only difference with my Mac 3818 is the 18" chain; yours has a 14" which is probably a better length for that size motor. I gave up the struggle and got a 52CC "Husky" for use around the farm. Now to change the lines and bulb on the Mac and see if I can get it running after all these years in the shed.
@HomeGaragechannel8 күн бұрын
no problem and good luck
@bwyyy7306 Жыл бұрын
I have a similar saw, 16”, hasn’t run in years, this is helpful!
@HomeGaragechannel Жыл бұрын
Glad it was helpful!
@walt5797 Жыл бұрын
Thank you for your help, I have the same unit stripped and rebuilt and of course I got the hoses wrong. very helpful video.
@HomeGaragechannel Жыл бұрын
no problem and thank you
@gbmader4 жыл бұрын
Thanks for taking the time to do this; had to replace the fuel lines and everything went well thanks to your video. appreciate it!!
@HomeGaragechannel4 жыл бұрын
no problem and thanks for the comment I appreciate it
@unionbetty4 жыл бұрын
Thanks for the great information. my brother gave me a mcCulloch chainsaw because it wasn't running, so now i feel like after seeing your videos part #1&2 i can fix this chainsaw. Thank you
@HomeGaragechannel4 жыл бұрын
Thanks for the comment I appreciate it .Good luck
@unionbetty4 жыл бұрын
My wife loves Betty boop and I’m an old union guy , been around engines for a while but not small ones. Thanks again
@HomeGaragechannel4 жыл бұрын
No problem
@dmc314053 жыл бұрын
Excellent tutorial. I don’t think it could have been any better. Thanks again..
@HomeGaragechannel3 жыл бұрын
Thank you
@crazyuncleduke80125 жыл бұрын
I watched your video and had the fuel lines and primer bulb replaced in less than hour in a Mac 3216 . Biggest holdup was trying to find my torx screwdrivers. lol Thanks for posting this excellent video. :-)
@HomeGaragechannel5 жыл бұрын
Thank you for the comment I appreciate it
@markbiggs76895 жыл бұрын
Thank you for this lesson! I have an old McCulloch chain saw that has been in storage for years. I would to get it running soon.
@HomeGaragechannel5 жыл бұрын
Thank you Mark Biggs for the comment I appreciate it
@tedmiller17453 жыл бұрын
If you don't want to get it running, let me know and I will give you an offer to buy and ship. Send me the model. TY
@karter99082 жыл бұрын
@@tedmiller1745 i have a damn near zero hr MacCat 38& just put all new hoses on oil & fuel and filters.....new clutch too!! Would sell it...dont need it. Pix on request.
@NewmanRacing Жыл бұрын
Picked up one of these but the fuel lines were rotten. Easy fix thanks to your video. Cheers!
@HomeGaragechannel Жыл бұрын
You're welcome!
@ZombieDaveAZ5 жыл бұрын
I totally agree with Tomas. Longer videos help you/me learn more. Great job.
@HomeGaragechannel5 жыл бұрын
Thanks Dave for the comment. I'll try to make them more complete in the future.
@brendandonovan65633 жыл бұрын
Great video. Straight forward step by step fix. Great resolution as well....now product another on fixing the Mac 3516 automatic chain oiler. Thx again
@HomeGaragechannel3 жыл бұрын
Thanks. If I find that model I definitely will.
@brendandonovan65633 жыл бұрын
are both fuel lines on the 3516 the same size? I believe you mentioned 3/16th in another reply
@HomeGaragechannel3 жыл бұрын
@@brendandonovan6563 yes I believe they are both the same size
@doncox94052 жыл бұрын
Thanks for the video. Had some one else repair the chainsaw before I found the your video.
@HomeGaragechannel2 жыл бұрын
Glad I could help
@billybilly48993 жыл бұрын
dank u u hebt mij heel goed geholpen met deze video !
@HomeGaragechannel3 жыл бұрын
graag gedaan
@raysplace65483 жыл бұрын
Thanks for the informative video.. I gotta say, My Mac was, and still kinda is, close to being thrown off a cliff.. lol.. I'll go over it again, after watching this, and hopefully, get it going again..
@HomeGaragechannel3 жыл бұрын
Good luck and thanks for the comment I appreciate it
@paulkf5pv3 жыл бұрын
Getting ready to start this project In a few minutes. 1:33 AM 7/21/2021. Already apart. Carb been soaking In berrymans. Not going to take it apart yet. Great video and clear explanation on what lines go where. And Go.
@paulkf5pv3 жыл бұрын
Done at 3AM. All fuel lines were brittle as a Taco shell. All good now. My friend gave me this saw over 10 years ago. First problem was the spark plug being to long, and the piston hitting it. Put the right plug in, and replaced the primer bulb, and fuel lines. Now I have two operating chain saws, with about 10 bucks invested. Thanks again Sir.
@HomeGaragechannel3 жыл бұрын
thanks
@HomeGaragechannel3 жыл бұрын
@@paulkf5pv excellent work yourself
@k462204 жыл бұрын
Chain saw (MAC 3200) wouldn't start, purchased rebuild kit with filters, hose, primer, new spark plug etc. Followed the video instructions and it started up as soon as I put fresh gas in and 2 or 3 pulls. Great idea how to install the fuel supply and return hose through the gas tank holes by cutting the hose at an angle and pulling it through. Thank you!
@HomeGaragechannel4 жыл бұрын
No problem and thanks for the comment I appreciate it
@BoysInTheWoodsofPA4 жыл бұрын
I was the 500th like!!! I have the identical saw and am putting a primer bulb in this week, your video is fantastic and the explanation of primer bulb, fuel lines, and which goes where was very helpful, many thanks!!
@HomeGaragechannel4 жыл бұрын
You are welcome Joseph Granat for the comment I appreciate it
@russelltmobley82624 жыл бұрын
Thank you, this really helped me today save time, and pinpoint the best way to rebuild my fuel and oil line! Russ
@HomeGaragechannel4 жыл бұрын
You're welcome and thanks for the comment I appreciate it
@fernandito18073 жыл бұрын
Hi Russell, when you change the oil line and fuel, it was both the same size ?
@4everunner5 жыл бұрын
best video i have seen on this topic, thx.
@HomeGaragechannel5 жыл бұрын
Thank you for the comment I appreciate it
@monkyshine55434 жыл бұрын
I put the 24 year old mcculloch together and she is running on second pull! I tried to be sure of fuel line connections as you stated. Mine moves fuel but never pumps up to full bulb, think its normal? Could you re-verify the fuel line connections please. Would it move fuel and run if I crossed them? Thanks for your help and 5 at-a- boys for your channel I have two brothers watching learning and subscribing.
@bioshock25894 жыл бұрын
@@monkyshine5543 Mine moves fuel but never pumps up to full bulb. i am a small engine mechanic btw. it is normal as long as it pumps fuel its fine
@alessandromarzico27033 жыл бұрын
THANK YOU SOOOOOOO MUCH for this Video. It helped me to finally repair AND start my very old chain saw
@HomeGaragechannel3 жыл бұрын
No problem and thanks for the comment I appreciate it
@Jim-ie6uf4 жыл бұрын
Another great video. Good thing you didn't need any hard parts, McCilloch went bankrupt in 05 or 06. Can't even find a fuel cap
@HomeGaragechannel4 жыл бұрын
you are absolutely correct. Thank you Jim S for the comment I appreciate it
@rocknral3 жыл бұрын
Look up the brand "Tallon" Same saw. May be able to source parts under that name.
@TecumsehRulesbcserk2 жыл бұрын
McCullouch chainsaws remind me of National Lampoon’s Christmas vacation. How Clark Griswald has gone crazy and sawed up part of the wooden stairway railing to ‘fix it’
@HomeGaragechannel2 жыл бұрын
I really like that comparison
@oldmanfred86763 жыл бұрын
Nice little homeowner chainsaw.
@HomeGaragechannel3 жыл бұрын
My thoughts too
@slipshaft Жыл бұрын
Thanks for the video. I like how you took the carb apart that was a big help.
@HomeGaragechannel Жыл бұрын
no problem
@chadfield376 Жыл бұрын
Great video! going to do these exact steps to get my Mac 3200 chainsaw going again.
@HomeGaragechannel Жыл бұрын
Good luck!
@howardmerrill19694 жыл бұрын
Great video. Just what I needed to repair my old chainsaw. Thank You!
@HomeGaragechannel4 жыл бұрын
no problem and thanks for the comment
@simbobby034 жыл бұрын
Perfect video .. was checking how to replace the fuel line in Mcculloch hedge trimmer and helped 100% .. Thank you
@HomeGaragechannel4 жыл бұрын
Thank you Bob Simon for the comment I appreciate it
@tedmiller17453 жыл бұрын
Love it, just picked up one of these. Wish it was a USA made unit but for 50 bucks and a runner i bought it..
@HomeGaragechannel3 жыл бұрын
that's a great price
@lifeisfuneh4 жыл бұрын
This and the part1 was great straightforward video THANK YOU!
@HomeGaragechannel4 жыл бұрын
Thanks for the comment I appreciate it
@lewiemcneely9143 Жыл бұрын
A coworker years ago brought in a small McYellow, one that you have to dismantle the whole thing because it quit. Seems like it was an 'Eager Beaver', just s dinky thing. I started tearing it down and found out the fuel line was shot but it was winter and too cold to haul concrete and me and the other driver were in the batch house, maybe 12 x 12. The coworker came in after delivering his load of concrete stone to see if I knew what the trouble was and I purposely scattered it all over the building. He about had a stroke when he saw it but I got him to go get me a chunk of fuel line and had it back running in a short while. I couldn't do it now but it was sure fun then. Thanks and Blessings!
@HomeGaragechannel Жыл бұрын
nice story, glad to hear you got it running.
@lewiemcneely9143 Жыл бұрын
@@HomeGaragechannel That one was way before primer bulb days. AND ethanol!
@geradkavanagh82404 жыл бұрын
Very well made video. I would have thoroughly CLEANED all the components before putting it back together. Even a small fleck of sawdust or dirt in the carby or fuel lines can create an enormous headache. Cleaning all the outer components also helps with cooling when you live in a hot climate like I do.
@HomeGaragechannel4 жыл бұрын
you are absolutely correct. thanks for the comment.
@geradkavanagh82404 жыл бұрын
@@HomeGaragechannel Quick comeback, keep up the good work.
@scrunchymacscruff12443 жыл бұрын
Nice BG for the idling tool..
@matthewkyle40674 жыл бұрын
Thankyou that was among the best how.to videos I've seen....
@HomeGaragechannel4 жыл бұрын
Thanks for the comment I appreciate it
@alssmallengines5 жыл бұрын
Great fix 👍 I like those little McCullough saws.
@HomeGaragechannel5 жыл бұрын
Thank you Alan Marshall for the comment. They are great saws. The only real problem is getting parts for it particularly the fuel and oil tanks.
@stevenpitts46773 жыл бұрын
Great, tight, nicely edited video. Most of this may apply to my gas weed eater!!
@HomeGaragechannel3 жыл бұрын
Yes it might
@ronmelys28543 жыл бұрын
excellent video! ive been given an old mcculloch 3500 and I'm gonna see if it starts this weekend. thanks !
@HomeGaragechannel3 жыл бұрын
hopefully it works for you.
@michaelfougeroussejr95714 жыл бұрын
Looks identical to my Mac- 3516. It's nearly 30 years old and still running strong.
@HomeGaragechannel4 жыл бұрын
They can be great machines if taken care of.
@pvv91062 жыл бұрын
I just fixed my thanks and God bless you.
@HomeGaragechannel2 жыл бұрын
Glad it helped
@juangarcia97852 жыл бұрын
Uno de los mejores video que he visto explica posibles fallas y cambios de diafragmas rápido y conciso aprendí rápido muchas gracias
@HomeGaragechannel2 жыл бұрын
Muchísimas gracias. Lo aprecio.
@elmandalorian66713 жыл бұрын
Thanks for posting...this video was perfect!
@HomeGaragechannel3 жыл бұрын
No problem
@SteveBoehme-vt8dw3 ай бұрын
I will try to replace the tubes tomorrow on mine. I ordered the kit last week.
@HomeGaragechannel3 ай бұрын
good luck with it
@JohnSmith-vz8pc Жыл бұрын
A good fix! I have one of these to fix, but it has no primer bulb.
@HomeGaragechannel Жыл бұрын
nice!
@anthonyharper81612 жыл бұрын
Awesome thanks ! I'm working on one as we speak . Just ordered fuel lines , may need that cover which covers carburator house air filter w / 2 screws.
@HomeGaragechannel2 жыл бұрын
thank you Anthony Harper.
@anthonyharper81612 жыл бұрын
@@HomeGaragechannel Thank you so much , should have it working by Saturday morning this weekend. Yessss I have all the parts coming together. Blessing's 😎
@jaluna065 жыл бұрын
Awesome fix buddy. Great work as always.
@HomeGaragechannel5 жыл бұрын
Thank you sir. I'm very appreciative for your support.
@alkimia19008 ай бұрын
Hermosa la McCulloch. Tengo la misma aquí en Arg y es sensacional. Y pensar que es del año 96 y sigue funcionando. Un producto extraordinario sin dudas
@HomeGaragechannel8 ай бұрын
Gracias por compartirlo
@leocruz42883 жыл бұрын
Great demonstration! Thank you.
@HomeGaragechannel3 жыл бұрын
No problem and thanks for the comment
@coganwatts23004 жыл бұрын
Video is really helpful and informative good set of straightforward vids
@HomeGaragechannel4 жыл бұрын
Thank you for the comment I appreciate it
@Riley_Luke_Wilder5 жыл бұрын
You sir are talented. I hope u are very successful
@HomeGaragechannel5 жыл бұрын
Thank you lloyd wilder for the compliment. I appreciate it.
@knottreel5 жыл бұрын
Very excellent instructions.
@HomeGaragechannel5 жыл бұрын
Thank you for the comment I appreciate it
@drrjim3 жыл бұрын
Very good straight forward video. Thank you. PS. I'm going to buy you a screw gun for Christmas..
@HomeGaragechannel3 жыл бұрын
good choice. Thank you for the comment I appreciate it
@barney1941 Жыл бұрын
another fantastic video,thank you
@HomeGaragechannel Жыл бұрын
Glad you enjoyed it
@tomtomas89325 жыл бұрын
Good video sr long videos is better I learn more
@HomeGaragechannel5 жыл бұрын
Thank you Tomas De Paz for the comment. I'm glad you like it. I'm still on the fence about 10 minute videos as I'm not set up for it. I'll try to make them enjoyable.
@billybilly48993 жыл бұрын
ok toch bedankt nog een fijne dag !
@HomeGaragechannel3 жыл бұрын
dank u
@41quinny4 жыл бұрын
Thank you for this informative video.
@HomeGaragechannel4 жыл бұрын
no problem and thanks for the comment I appreciate it
@CESARP355 жыл бұрын
Awesome video Mate, very informative, much appreciated!!
@HomeGaragechannel5 жыл бұрын
Thank you Cesar P the comment I appreciate it.
@garymarmounier7095 жыл бұрын
Great video .you saved my ass. Thanks so much it works after I got the parts.
@HomeGaragechannel5 жыл бұрын
Thanks for the comment I appreciate it
@johnturner16054 жыл бұрын
Thanks, very well done. Much appreciated
@HomeGaragechannel4 жыл бұрын
thank you John Turner for the comment I appreciate it.
@johnjohnson51505 жыл бұрын
One other thing to add is what diameter fuel line to use and maybe where to buy the parts. Thanks again.
@HomeGaragechannel5 жыл бұрын
That is important information. Thanks.
@clarkgarrison70914 жыл бұрын
@@HomeGaragechannel so what diameter is the fuel line
@HomeGaragechannel4 жыл бұрын
3/16" or .190"
@MrBat0003 жыл бұрын
Thanks for the video! It was really helpful.
@HomeGaragechannel3 жыл бұрын
no problem and thanks for the comment
@David38804 жыл бұрын
Thank you very much for your instructional videos. I found my fuel line was deteriorated and the filter had fallen off. Needless to say, that was the reason my saw would not start. Now I need to locate the correct parts, make repairs and get it running again.
@HomeGaragechannel4 жыл бұрын
Good luck David3880 and thanks for the comment I appreciate it