FLAIR 58 X NANOFOAMER: How I Approach Workflow and Latte Art

Here, I take a look at the popular pairing of the Nanofoamer and the Flair 58. This is an incredible combo for those looking to manually create their beverages daily using the lever espresso machine and electric frother.
I pitch simply one should prepare one's espresso, heat the milk, pull the shot, froth the heated milk, and pour. Overall, with proper preparation, you should be able to knock out a cappuccino or latte in the matter of about 5 minutes from starting the water on the kettle to pouring your beverage.
Don't forget to subscribe if you enjoyed the video!
Join my Patreon community at:
/ lancehedrick
Find me on IG at:
/ lancehedrick
SE Profiler referenced:
www.naked-port...
Check out Flair!
www.flairespre...
Check out the Nanofoamer!
www.subminimal...

[@bbenny91]

No One: Lance: "I can make the silky milky"

[@LanceHedrick]

My life MO 🤣🤣🤣

[@leckel1996]

Sounds like left and right channels are out of phase. I’ve heard this with some Onyx videos before as well. Flip the polarity of one channel and the problem should be fixed. 👍

[@Milkscribbler]

Kudos to the camera team showing us all the good angles and following you wherever you go XD

[@Melnihr]

I legitimately think you've convinced me to go the direction of the manual espresso machine between this video and the last Flair 58 one. That machine looks like a beauty, and like it fixes the workflow issues of most manual espresso machines. I've never been interested in manual, but I think the Flair 58 looks to be my next espresso machine 👌. I had been a bit worried about foaming milk for latte art, but this looks still quite doable with a decent workflow using a milk foamer like that. As always, thanks for the videos Lance 👍

[@LanceHedrick]

Wow that means so much! Thank you for the kind words. I hope you enjoy it! I certainly do

[@Tamimzzz]

Have you got the flair 58 and nanofoamer by jow? How are you finding them?

[@Melnihr]

@@Tamimzzz I have, I pre-ordered the Flair58 and got it at the launch in Canada, and I ordered the nanofoamer with it. The Flair58 is everything I wanted it to be. The workflow feels great from start to finish, and I really like how much feedback you get and how much control you have while pulling shots. I basically never waste shots anymore, if I ground too finely I feel/see that right away and just let the shot bloom for a bit before pulling it as normal and that turns out fine. If I grind a touch coarse I pull at lower pressure and maybe make it a lungo, and that turns out fine. And when dialed in it's 😘👌. All of lances videos talking about different types of shots you can pull have helped me a lot with being flexible with pulling different styles. The nanofoamer works, you can make latte art with it, but it turns out for me personally, I don't like the feel of using it in my workflow. I still use it for other purposes, it's fine, but I had to keep my old/cheap espresso machine on the counter just for it's steam wand. Seperating the heating and foaming of the milk is an extra step I'm not up for first thing in the morning, and the foaming does take longer than I would like to get latte art level microfoam with the nanofoamer v1.

[@Tamimzzz]

@SolidVauld thanks for replying in detail. I am also thinking of getting the 58 or 58+. However I have backed the Meticulous Espresso and milk and not sure if I should stick to it, giving the fact that It might end up getting delivered like next year. And do I have the patience to wait for that long. I don't have any espresso machine. So whatever i pick will be the first.

[@ziptiefighter]

I appreciated your use of the microwave to heat the milk. Good to know that's a viable option besides the stovetop. A worthwhile vid...thankyou

[@tgalidaVO]

You’re the first person to describe it as “wet paint” and it makes so much sense now 💡

[@viralord]

Mic audio sounds weird for me

[@leroybrown4797]

Same here, both phone speakers and headphones.

[@ShawheenAzizi]

It's the audio, not you. It was destroyed with a filter or $5 lavalier mic. Crazy to hear such bad audio with the video production 😂

[@jdpalacios]

Try to use your iphone vertical, not horizontal.

[@chriscoleman2489]

I have just realised why I love Lance's videos so much: the delivery is a perfect (for me) balance between ad lib and script. Like being in a classroom with a very experienced teacher. Oh wait, that's what this is! 😊

[@LanceHedrick]

Haha! Yes! Thank you! That is legitimately the balance I strive for

[@Stan_sprinkle]

Yeah you nailed it. This is the first video of his I’ve seen and that’s exactly what I was thinking but couldn’t put it into words. New subscribaaa!

[@LanceHedrick]

Thank you so much!

[@annaheya2109]

I learnt a lot from your tutorials which inspired me to start my latte art journey ☕️💗

[@LanceHedrick]

That is so fantastic. Thank you for sharing!

[@marc-andrelanglais9506]

Thanks for another eye opening video…. I never thought latte art could be done with a frother. What is great about this set up is that you can get great coffee even when travelling! Although doing 4-6 lattes with this set-up takes a while…

[@LanceHedrick]

Absolutely! Big time travel. And yes. Doing multiple will take a bit

[@cameronyartz1424]

I'm sorry I have been absolutely loving your videos, but the audio in the last two has made them unwatchable for me personally. Easy fix though!

[@jonathanhartmann4496]

i have this same issue when I listened using only 1 of my wireless earphones, but as soon as both/none are connected the audio is perfect.

[@victorgan80103]

@@jonathanhartmann4496 I had the exactly same issue! Why was that tho??

[@jonathanhartmann4496]

​@@victorgan80103 I honestly have no idea. my guess is that it is codex related on the earbuds side maybe. I came across the solution by accident as I thought that my 1 earbud was broken so I listened to both and all of a sudden it was fixed :)

[@Rick_Hoppe]

Lance may have great content, but I’ll never know because the poor sound makes this video is unwatchable. KZbinrs often talk about upgrading their cameras. I’ll often tough out poor picture quality if the sound is decent and the content is looking solid.

[@LanceHedrick]

Hey Richard! Might be helpful to check out recent videos before getting hot and bothered lol

[@ChristensenStringStudio]

I subscribed! I've been on the fence about the Flair 58, but pretty much ready to pull the trigger now after watching these two videos, and some others out there. Will use that and a Bellman steamer. Time to level up from the Aeropress... Cheers, and thanks for the timely, well produced, and very helpful videos.

[@almoni127]

BTW, the problem with the audio is out-of-phase stereo. Inverting one of the channels will probably fix it.

[@annaheya2109]

I think we could still understand him even if you switch audio off he has such amazing sign language lol

[@almoni127]

@@annaheya2109 true 😆

[@LanceHedrick]

Info tend to use my hands quite a bit 🤣 audio will be better going forward

[@TerryManitoba]

Another great / entertaining / informative video. I've been doing this for 4 months now. Except I use 3 oz cream -I Nano foam it cold (half whipped) then 15 seconds in the microwave- 19 grams/35 yield- 9Barista machine- gold son gold... No art was assaulted in making this drink!

[@LanceHedrick]

That is awesome! And thanks for the kind words

[@codyrogers3876]

You've helped me make a decision on my first real espresso maker. I was always thinking about automatic or semi-automatic espresso machines but you've introduced me to, and helped convince me to buy, a manual press. Thank you! Filter coffee is all I've got for now, but espresso will be coming soon!

[@LanceHedrick]

That is awesome! Welcome to the manual world of obsessive freaks haha!

[@codyrogers3876]

@@LanceHedrick Dang, 3 days to respond? LA had you BUSY!

[@LanceHedrick]

Haha so sorry about that! Now in Memphis! Lol. Doing my best 🤣

[@codyrogers3876]

@@LanceHedrick all good my guy! I'm just glad you're enjoying it!

[@LanceHedrick]

Haha! For sure. Thanks, friend. Hope you're well!

[@ChrisBranch]

I think this video just saved me about £1000! I've been debating going for this setup or something like the Appartamento, and I think this will work perfectly, plus I'll save some cash. Thanks Lance 😊🙏

[@LanceHedrick]

Haha that is awesome! So happy you saved some money 😜

[@noahrollins1719]

Love the school of rock reference and shoutout to us Canadians!

[@LanceHedrick]

Hahaha! Yes! Love school of rock AND Canada!

[@danielchang6681]

I've been trying my nanofoamer several times already and still not able to make any art out of it 😂 thanks for the video! and i will definitely try again after watching this video!

[@LanceHedrick]

Make sure to have Energizer lithium batteries! Makes a world of difference

[@Stan_sprinkle]

What kind of espresso are you using? When I got mine i practiced using a Nespresso machine for convenience, but I couldn’t get any art wriggles to form and was getting frustrated as hell. I figured out eventually that Nespresso creates too much artificial crema on top. It’s too thick and the milk can’t move through it. So as soon as I took a spoon and removed about 2/3 of the Crema I could immediately pour a little bit of art. Also, make sure you check Keep the screen of the nano really clean, rinse it off as soon as you’re done using it. If the milk dries up at all the solids really hard to get out of that screen and you need to use a toothbrush to do it. Just a little bit of clogging will really screw up the foam quality

[@danielchang6681]

@@Stan_sprinkle I'm using Mr. Coffee and i do noticed quite bit of crema on the top. I'm definitely gonna try to take them off tomorrow and give another shot. So far still no success with my nano, thanks for the advice!!

[@AbdielJ]

boom bam boom bam boom badaboom and voila a cappucino! love it!! 😂😂

[@Milkscribbler]

hahaha that hand on hip while grinding, i want this attitude too :D

[@LanceHedrick]

Hahaha! Had to throw a little tude 🤣

[@stuartcampbell114]

This guy changed my coffee life We want Lance We want Lance We want Lance We want Lance

[@LanceHedrick]

Thank you so much!

[@orrinbelcher6593]

Super fun video, appreciate grind settings on Niche, truth on Nano Foamer as a frothier, flow profile tool for Flair 58, Rock & Roll the only way to go. Superbly done and lots of fun to watch

[@LanceHedrick]

Thank you very much! Appreciate you

[@scent007]

Love me some Lancey dancey ❤️

[@LanceHedrick]

I'm here for that nickname haha

[@philreilly6959]

Hi Lance, Your videos are brilliant - so informative! However, like one or two others, I have a problem with the audio. The audio in the whole of this video was very quiet, so quiet that they music at each end blocked it out completely. I just got mumbling! It's happened before, but not on every video. Very strange!

[@_doros_]

I think it only happens when listening in mono

[@scd6969]

looks like a match made in heaven for the 58!

[@LanceHedrick]

Certainly is!

[@everything-bagel]

It would be interesting to see a performance comparison between the Nanofoamer and an ordinary electric milk frother. The $6 milk frother I got from amazon has been worth its weight in gold.

[@nkermit1]

SIR LANCE-A-LATTE!!

[@LanceHedrick]

My moniker. I love it haha!

[@robertjason6885]

Lance, just purchased a 58+. My daughter has one of this $10 frothers. It’s creates lots of turbulence so I may be good with it. Would you still recommend their frother? Man, I wish someone made a microwaveable steaming pitcher to save a step.

[@AK27AK]

Same company has recently come out with a pitcher that will heat and froth simultaneously 👍 Maybe you’ve already seen the Nanofoamer PRO

[@robertjason6885]

@@AK27AKIt’s just a bit more than I’d want to spend.

[@AK27AK]

@@robertjason6885Agreed!

[@bradyvilhauer4445]

Constantly on the hunt for someone as talented as Lance or Hoffman to do a video on their intricate findings using the NanoFoamer. But these guys play at a level that can’t easily stoop to NanoFoamer from $1,000+ machines. And I get that, no Lambo professional will do a review on a mid-class vehicle. I must become that man myself, the student of the NanoFoam, the pupil-turned-leader of greatness, crafting my own budget microfoam capable of competing at high levels……. Or, maybe the nanofoamer truly isn’t as capable as I hoped 😆. Though this art looks insanely good with the nanofoamer. That did bring hope.

[@LanceHedrick]

I might just need to do one... 😜

[@billeterk]

We’ve got our machine in for a service and have been using Picopresso and Nanofoamer for two weeks. Workflow / time isn’t so good. Coffee’s great if you get heat and grind size right. Milk one in every 3 lattes I’m happy with. Art always works but sometimes a little grainy, sometimes looks smooth but feels thin in the mouth and just occasionally good. Took about 10 goes to be pretty reliable.

[@bradyvilhauer4445]

@@billeterk I was never this confident with my nanofoamer, but I’m glad you’ve had decent results! I think I shared similar feelings for how the milk tuned out. But I was a beginner and had no idea how to pour at the time so I rarely got a great pour. Hope your main machine comes back soon!

[@Tastewithnewdrinks]

Nice video thanks for sharing your experience

[@LanceHedrick]

Thank you sincerely for watching!

[@GrandStudable]

awesome video as always Lance!! I always come out with one or two new things from your videos :)

[@LanceHedrick]

That is awesome news! Thank you so much for the support

[@MrEsaleniuc]

Audio sounds… well not great m. Hopefully just an upload issue

[@annaheya2109]

Maybe need to invest in a separate microphone

[@Elmusiico]

Love the video, thank you so much! You are awesome

[@LanceHedrick]

Appreciate the love, friend!

[@JoshuaGeow]

YESSS! THANKS FOR THIS

[@LanceHedrick]

Absolutely! You've been asking lol!

[@geegeedrox7871]

Lance, did you heat up the milk in the microwave all the way up to the final temperature? In your other video about steaming milk using a steam wand, you said something about aerating up to the temperature of your hand and then whirl the rest of the way. So maybe the temperature wasn't right for making froth after microwave, and that affected the final "silky-milkiness".

[@stemazzo84]

I’m not even half way there but I gotta say you’re hilarious man! Awesome vid!

[@LanceHedrick]

Haha! Thanks so much, my friend

[@danymeeuwissen5973]

Great video, as always! Two things to get more textured microfoam: stretch longer, like 5 seconds and maybe get you vortex a bit deeper if it doesn't mix in completely. Second tip, use the most powerful AA batteries you can find (2450 NiMH rechargeables prefered), as that will make a your Jedi light saber spin faster! Infinite pooowwwwaaaaaa!!!

[@annaheya2109]

Thank you I agree! Foaming as early as possible and creating a vortex when the milk is still cold

[@almoni127]

@@annaheya2109 How do you heat the milk? On a stovetop?

[@LanceHedrick]

Sure. Adding more air at the beginning will get more foam, but it still won't have that consistency to pass the shake test. Mostly because the integration simply isn't as tight as when stretching with a steam wand (able to create the microfoam in a different way that can't be replicated past 100F). This process was to get foam capable of latte art.

[@ed4008]

I love ristretto’s with milk based drinks!!!

[@LanceHedrick]

Same! Best way to go, imo

[@tiyatatsasiphonganan2484]

I saw that etzinger box !!!! What was thattttttttt !! Is that the demo of the handgrinder !?

[@LanceHedrick]

.... 😎😎😎 I'll never tell

[@iamjerney]

Great video as always 🙌🏼

[@LanceHedrick]

Thank you so much!

[@hanzohcafe.]

Awesome workflow!!! 👌

[@LanceHedrick]

Thank you! Hard to cut much time but I did what I could!

[@41519731]

Nice video my friend! Great humor!

[@LanceHedrick]

Thank you so much!

[@curiousseal2678]

Great video Lance 👍

[@LanceHedrick]

Thank you very much!

[@JoshuaGeow]

That familiar sound when you remove the nanofoamer from its case. You have the fine screen in the case dont you! 😂

[@bradyvilhauer4445]

HA so not just me 😆😆

[@LanceHedrick]

Hahaha! I do. It's true. Lol

[@classicbandgeek]

Would you consider using an entry-level home machine to do a walk-thru on how to achieve good espresso / milk with? Something like the Breville Bambino Plus? Love your vids!

[@LanceHedrick]

Absolutely. Thank you for the idea!

[@JMM3158]

Hey Lance, I own a flair 58 and generally pull a 1:2 (20g of ground coffee) shot over 35 seconds when I’m making a cafe latte. When pulling a ristretto shot using the Flair 58, how long should my extraction time be, not including the 10-15 sec pre-infusion? Thanks!

[@NashvilleFanatic]

Do you have any thoughts about the Bellmen Stovetop Milk Steamer??? Would love to know if you would give it a thumbs up.

[@LanceHedrick]

It's incredible for sure

[@ryanchoi9334]

Probably because I’m watching on an Iphone but there are audio issues again.

[@TracelessFK]

Whoa have times changed over 3 years 🤯

[@burger85]

Great video Lance - question would you replace a conventional espresso machine with steam wand for the Flair 58 and Nanofoamer? Ps when are you going to drop some more beatbox X Workflow videos?

[@LanceHedrick]

Hey! I would, depending on the machine. Especially with the smart espresso profiler!

[@johanneslaudi6184]

thanks man! now i know how to make a good latte. . . . . . . . now i just need the tools..

[@annaheya2109]

Hahaa that’s what I said a year ago! It took me a whole year of practicing one cup a day to get it right lol

[@LanceHedrick]

The tools are certainly necessary haha when you get them, these videos are here!

[@Arashasadi23]

@Lance Hedrick thanks for the video, beside the portability and other features, how does flair 58 compare to pro 2, just in terms of esspresso body and taste ? Does it worth the extra money ? I'm looking forward to upgrade my pro2 to 58 if the difference worth it.

[@almoni127]

Very interesting video! In general, this channel is gold. Seems comparable to using a La Pavoni lever machine but without steaming. What are the pros/cons?

[@LanceHedrick]

Take a look at my video on this machine! It's two videos back

[@almoni127]

@@LanceHedrick I saw that (fascinating) video, but was there any comparison that I missed?

[@LanceHedrick]

No comparison. I thought you were asking pros/cons of the flair 58, which I cover there. I don't have experience with the la pavoni. Only able to work with equipment I have haha!

[@doc8125]

the cons of a la pavoni is temp stability. They are prone to overheating, so your shot amount is limited. They also take a while to warm up before you can use it and they take A LONG time to propperly cool down which it needs to do before you can refill the water tank

[@almoni127]

@@LanceHedrick Fair enough :-) Maybe a viewer with a La Pavoni will have some insights.

[@zefe3886]

WAIT!! How are you able to do pressure profiling with the flair58?

[@dude4christ00707]

So did you try both screens that come with it? Any other tries you’ve been able to create more stability for the shake test?

[@LanceHedrick]

Yes! The other one creates a bit dryer foam. Not as good for art.

[@ricemanhk]

@@LanceHedrick Not sure if I missed it in the video, but which screen do you use that's better for art?

[@Bostonirific]

I have to wonder what the tamper you use is. I know you have a breville dual boiler and I have been using an Espro calibrated. I think it works great, but it isn't the tightest fit on the portafilter. I seem to find a ring on the edges of some un-tamped coffee sitting unsettled. Do you think that this might be an area to improve on channeling? I would be interested in seeing your thoughts! Lastly I must saw great video! I love watching even if this is not my ideal prep style, but I will recommend it to a friend I know who is doing this at home! Keep it up Lance! Great video again

[@LanceHedrick]

Hey! Thanks for the kind words. I use an artpresso tamper

[@beegeb]

Thanks for the nanofoamer tips. I bought one but rarely use it since I have a hard time getting the consistency right. I hope someone creates a hack on how to keep it on rather than pressing the on button the entire time.

[@LanceHedrick]

For sure. That is an annoyance for sure!

[@ricemanhk]

I cut up some small pieces of masking tape and stuck about 4 layers on top of the copper plate, makes it quite a bit easier to activate the switch

[@Caffeine.And.Carvings]

I drilled a hole in the top and soldered a 5V power supply to it. So it works on full power without pressing. Aooo much better

[@matiasnahuelgodoy2143]

thaaaaaaaaaanks!!!!! i was wondering whether to buy a nanofoamer or a home espresso machine to keep up the practice of my latte art (i stoped trying with the french press, never got it well with it) i'll give it a try

[@LanceHedrick]

Do it! Does really well

[@angeldarkduck193]

The audio is messed up but no one else seems to have this problem?

[@armLocalhost]

I tried to listen to it through the phone and it's all robotic and I cannot understand a word. However, through headphones or speakers, you can understand but it sounds odd and disturbing.

[@mortenjorsett5876]

His mic it's out of phase. Try listen on just left or right channel.

[@conspiracy8119]

Full screen mode, audio was kinda off, then I have to put my phone up right and then fixed the problem.

[@cisumevolneblok]

How many espressi did you have before that shot? 😅

[@Dangkles]

Do you have a link to the upgraded bluetooth barometer?

[@almaximus03]

Thank you

[@Milkscribbler]

I have no issue with the audio either. Sounds clean and clear to me.

[@hcr32slider]

Mine doesn't work properly at all. Very strange. The music is perfect and can barely hear Lance.

[@TheSololobo]

Does anybody know if you can attach the Smart Espresso Profiler on a Bezzera Strega?

[@danilocianfrone670]

i am watching this video at 2x, dude sounds coked out of his mind, especially from 7:29

[@godsavedcole]

I've been dialing my 58x and I've had my go (without any technique reference) at latte art with microwave milk and a frother and it's been unsuccessful... But yours looks amazing. New fuel to dial the process! Thanks for the walkthrough

[@alex_cjjf7287]

Won't look, hope for a re-upload

[@Robert-yj2fu]

Looks like a nice duo overall, thanks Lance

[@LanceHedrick]

For sure is! It makes some nice brews

[@chaz9123]

I have an issue with mic sound still, on a phone speaker. Music at the beginning was fine, but mic sound is still muffled and sounds processed

[@eac537]

Same here with nice headphones

[@LanceHedrick]

Noted. Working on it

[@LanceHedrick]

Sorry new video is better!

[@eac537]

@@LanceHedrick can confirm! sounds great!

[@LanceHedrick]

Appreciate it!

[@tompiscitelli2548]

I have a Gaggia Classic 2011 and 2 Rancilio Silvias 2018 (one I use for steaming and one for brewing ) I know! I wanted a double boiler machine, but am I missing out on real espresso taste from not having a rotary pump?

[@LanceHedrick]

You're certainly getting real espresso taste, just maybe not as optimal as it could be? I'm just obsessed with flow profiling.

[@SerafimSmig]

Loved the video! What was your espresso dose before grinding and your yield was 35g correct? Thanks! Leaned a ton!

[@SerafimSmig]

Just rewatched the video and you do say what your dose is - 20g - somehow I missed it! Great work as always!

[@LanceHedrick]

Thank you, friend!

[@SerafimSmig]

@@LanceHedrick hey! What’s would be your target shot length? You recommend after 15s preinfusion - how long should it ideally take to pull a 35g shot on the 58? Thanks!

[@joshguiao4428]

Hey! Can you please consider making a review on budget espresso machines like the Delonghi Dedica?

[@LanceHedrick]

I'm about to do a video in a few weeks on the Gaggia classic pro! My Patreon members voted on it!

[@robertjason6885]

Nice.

[@RTOBarista]

I got the Smart Espresso Profiler for my Flair 58 Do you ever use St Antony's Wedge or the Ona OCD3?

[@LanceHedrick]

I do not. Best way to distribute is WDT and then tamp. Will give the highest extractions! Cheers

[@RTOBarista]

Thanks

[@monika.tours.coffee]

Lithium nanofoamer or basic one plz ???cz i wanna buy one for me

[@LanceHedrick]

Lithium is better. It is a turn on and off button

[@cheekster777]

*BOOOOOM!* 👊🏻

[@LanceHedrick]

My truest fan 🙏🏻

[@cheekster777]

@@LanceHedrick - Still, really enjoying the content Lance. Keep up the great work! 👍🏻

[@IndependentView7]

Just subscribed, have you reviewed the Flair Signature series?

[@LanceHedrick]

I've not reviewed them, no. But I have two videos on flair's page that go over the flair pro 2 and I have one here on the flair 58

[@eriatarka1983]

And here I've been taking my milk out of the microwave every 15 seconds to stir it because that's what the internet said I had to do to prevent it from scalding.

[@LanceHedrick]

Haha! Very odd. I would recommend doing it on the stove for best results, but in a pinch, the mw is fine

[@Wartortlenz]

I think the sound effects are a must as well. Without them you WILL fail

[@aspiringistari]

Great video. Audio could do with some improvements, but very good, thank you!

[@maxb5947]

Which one is better, the flair pro 2 or 58/x?

[@LanceHedrick]

58x imo. But it is super subjective

[@specialk22tt]

5:03 - Turkey Sub!

[@tommymank4477]

So…. Does the profiler make the Flair twice as good?

[@LanceHedrick]

No. It does not.

[@orikolp9379]

Sounds like sound was recorded through a muffler over cellular with no tower in your vicinity... Please correct audio and reupload.

[@AMTunLimited]

So this is full "this is my third cup of coffee" vibes but I'm gonna take a wild guess and say you're just like this all the time. Not that I mind, just an observation.

[@LanceHedrick]

Only when putting on a show

[@toddmurrell5307]

Cool video. What kind of microwave is that? Looks tiny

[@LanceHedrick]

Haha I'm not sure! It's my friends house

[@radziahradzi]

Is the voice muffled for everyone or just me? I didn't see any comments commenting this so maybe just me. But I tried refreshing many times and still can't hear the audio properly. Nevertheless thanks for the video

[@k_meowington]

there is one thing about these 'foamers' that no reviewer touches - the taste of milk: a proper steamer makes milk lose most of its 'raw milk' taste, while those foamers do not. For me this is a deal breaker - that's why I don't use them

[@stevenfontanez7852]

Audio sounds perfectly fine to me not sure why everyone’s commenting that

[@Na015110]

try listening using a headphone/earphone

[@LanceHedrick]

Thank you. I will be making a change for the next video!

[@orangejuli07]

Lance - WHAT is that next to your fridge built into the lower cabinets?!! Is that a tiny fridge/freezer of some sort? It looks amazing.

[@LanceHedrick]

Haha I have no clue. This isn't my house lol!

[@taroman7100]

Our first machine was a manual.

[@monika.tours.coffee]

V1 or v2 plz ?????

[@LanceHedrick]

V2!

[@sedelstein]

Can you do latte art with 'nanofoamed' skim milk?

[@LanceHedrick]

That would be very difficult. Skim milk will foam up a ton. I've not actually tried it though.

[@jalander8817]

Audio is wacky

[@penultimatename6677]

Audio is terrible

[@taroman7100]

That milk looks on the watery side

[@devingpritchett]

What tamper are you using?

[@LanceHedrick]

Hey! It is from artpresso

[@devingpritchett]

Awesome thanks!

[@chadgregory9037]

I think it passed the test, there's just a little bit much in there =]

[@matiaschacana5768]

Audio problemss

[@frangeech]

I feel duped because the title says Flair 58X, but it’s really a Flair 58!

[@LanceHedrick]

Ha! The x was meant as a way to tie the two things together lol Flair x nanofoamer

[@movoyemickele]

Well, I'm gonna stop the french press method since it gave too much foam, I can't even make single successful latte art with it. You know when I poured it, it became a mountain of milk, and all the coffee was gone. I tried to stir it and still white lol.

[@LanceHedrick]

Oh that stinks! Look into the nanofoamer!