Flatpack Overland Drawer System - Build it Yourself!

What should they design it for next? Let them know in the comments!
See all of the available drawer systems here: bit.ly/3EY5vIz

[@RevereOverland]

All drawer systems now come completely assembled, rather than DIY/flat pack. There are a lot more vehicle options and drawer options now, including the Ultralite system that starts at $899 and weighs as little as 43lbs. Check the website to see if your vehicle has options: bit.ly/3EY5vIz

[@theawesomeness385]

Hey, the ultra lite starts at $1,199 for my car😭 seems like every option is about that cost. Plus I can get a fully treated, carpeted, locking, and dialed system for $200 more from dobinsons. Am I missing something here?

[@RevereOverland]

@@theawesomeness385 you get more storage space and significantly less weight with the Ultralite when compared to the Dobinsons. All their drawers now come bed lined as standard, which is why they are $1,199 shipped to your door now. If you don't want that, give them a call.

[@EPiQ_cR]

My $0.02 is I'd like the experience of building it myself, whether I bought the plans-only or the supplies.

[@BackWoodsYeti]

i wish they still offered the kits.. the larger universal kit cost well over 2200 bucks and frankly puts it out of reach for a lot of people. and was it always SMH overland website?

[@RockymtnGX]

@@EPiQ_cR yeah went the plan route for my GX, sure wish they still sold plans, is what it is though.

[@AKgrowngal]

This is such a cool idea! A semi-DIY system for those that don’t want to buy a fully built system or fully build their own system! It’s like the IKEA solution to overlanding storage! Very awesome! Nice job! 👍

[@AddyKnows]

that aussie accent to southern accent transition was mint haha

[@6point1hemi]

Can’t wait for the GX470 version.

[@MrJohnmccrory]

that is an amazing product fellas , You need to some how get selling these in Australia , they would sell like hot cakes , also some marine carpet covering them always looks smart

[@jreinhart6161]

Land Rovers! Would love something like this for my LR2

[@kevinpedican9949]

Can't wait for the Jeep Grand Cherokee wj version!!!

[@cristopherandino3000]

This is exactly what I need. I'm getting one for sure!

[@garybarfield2981]

Love your design. I would like to see a build for a first generation Nissan Xterra

[@idahoaxeman5934]

love, love, love this setup ....my 2006 Jeep WK Grand Cherokee would love it too!

[@midsouthaerials7178]

I’ve been looking at drawers for days. I want this for my 200 series!! (2009 LX570)

[@terrencesoltz8943]

Seems like something like this would be very nice for a 3rd gen Pathfinder

[@SpencerHogg]

Such an amazing storage setup love this

[@lorismith8479]

I just bought a chuck box thank you for this!!!

[@mattj630]

Xterra should be a fairly easy plan change; dimensionally fairly close.

[@RevereOverland]

Good call - that's one we hadn't considered!

[@alejandrolemmo]

Great Job! It would be great to have this built for my 2021 Jimny, to place on top of the folded rear seats.

[@keithwayne8604]

Would love to see this on a 2nd and 3rd gen tacoma. I have a '15 with the 5 ft bed that can be at your disposal for measurements.

[@shaweehillsworkshop4226]

Are you near central KY?

[@keithwayne8604]

@@shaweehillsworkshop4226 I can be. I live in NC, but a road trip is always welcome.

[@RevereOverland]

www.overlanddiy.com/home/p/custom-size-drawer-system-for-large-suv-bjnrl?aff=2

[@adriansmith3096]

Hope to see a kit for the 2022 Toyota RAV4

[@JoshuaSeward]

Impressive!

[@dmay949]

Can you guys make one for a GX460? This looks great!

[@therealgaragegirls]

I wish there were a kit like this for my old (2003) G Wagon.

[@LoHairyLee]

Would love to see a kit for the Hummer H3. I know they're out of production, but I'm finding NOBODY makes a drawer system for those. Cargo area is very close in dimension to an FJ Cruiser, but anchor points and seat angle are different. Also I believe the FJ door opens a full 90 degrees where the H3 does not, so would have to shift an inch or two toward passenger side for the H3 in order to fully open drawers. Might be possible to have a common central drawer design with different wing kits and cover 2 vehicles.

[@SlumpdWiz]

Looks really clean, awesome product yall

[@zenofthemoment]

Outstanding! The only instructions you left out were the instructions on how to convince my wife that we should spend the money on this instead of our monthly ramen budget! 😄 Keep up the great work!

[@RevereOverland]

Lol!

[@justinkostelecky6201]

I’d imagine that it would be similar to a 3rd Gen 4Runner? Very cool idea, I’d buy one!

[@RevereOverland]

We have generic options now that will fit a 3rd gen!

[@justinkostelecky6201]

@@RevereOverland yessss! 😃

[@santanablackberrry]

I need this for a truck bed build.

[@bigghoss762]

I might build something like this for my '84 Chevy K5.

[@brucesinclair9628]

I know it was mentioned before but Jeep JK Unlimited (sub woofer in floor) please !!! I've seen one similar to this before and the JKU didn't get any love from him either... Which is odd because the Jeep community is all about DIY. Thanks for the idea's for sure !!!

[@RevereOverland]

I'm not sure what the JKU with the sub looks like, but there are generic medium SUV options on the website now!

[@davidrucci]

A 4th Gen 4Runner kit would be awesome. 🤞

[@RevereOverland]

4th gen specific is coming soon! There's also a medium SUV option that could fit.

[@Voltechs]

Lol the “fake” drill/screw sounds are highly unnecessary during the timelapse sections.

[@PhuVet]

But funny

[@gregreese11]

Would love to see one for the 2 dr Jeep JK Nice Work!

[@ams5339]

Hi, I have a 2021 4Runner and really like the drawer system with sleeper extension. Can you create more videos showing the details of sleeper system on how it deploys and what kind of support it has?. I searched through the website and KZbin and did not see any pictures or information about it. (There is one picture of the bed extension, but no information of the support mechanism.) Thanks

[@jailbreakoverlander]

Whats the total weight when assembled? and when will 80 series be avail.

[@RevereOverland]

A little under 200lbs. The 80 is getting measured today! You can sign up for updates on the website.

[@countryboy12gsp78]

Jeep patriot!! Please same style but double drawers on the driver side and fridge crate on the right side!!

[@williamcollard7354]

Would love a Jeep WK kit!

[@RevereOverland]

Good call! I always struggled for storage in my WK, and that would make it so much easier.

[@MrWinger1951]

Would like a RAM 1500 kit. There are a lot of RAM trucks out there and while not many are to be seen off road, there are still many owners who would be interested I'm sure.

[@RevereOverland]

Good news! There are truck options: www.overlanddiy.com/home/p/custom-size-drawer-system-for-large-suv-bjnrl?aff=2

[@MrWinger1951]

@@RevereOverland Very cool! Thanks for the update.

[@LillyCocoBean]

Very interested in truck options. I have a ‘19 Rebel w/ a shell and a simple DIY platform setup. Looking to upgrade.

[@TradShowTom]

1999 Suburban would be nice.

[@shawnthomas6460]

Love your builds. I purchased the plans for your DIY shower and it is now mounted on the side of my overland trailer. I had to make a few mods and added LED lighting in the lid of the case. My wife loves it. I also built a unit for my 2door JK. I couldn't afford the locking slides so I made my own. Keep up the great builds. I would love to see you design a 2door JK one!!

[@fredir3596]

Jeep Grand Cherokee WJ!

[@timbrown7980]

Hi Rob, can we still buy the plans? I don’t see them on the SHW website

[@wallheadkdir]

I would like a kit for a 2016 duramax 8ft bed please 😁

[@robleblanc9510]

Would love something like this for my new RAV4.

[@RevereOverland]

Check out the generic small SUV sizes on the website!

[@jeffreyahunter]

Ever thought of doing something for the M1102 trailer? If not your builds are amazing.

[@RocknRobF1]

I don’t see the parts and material list in the description. Can you tell me how long are the drawer sliders

[@aarontuza4194]

Hey were can I find a set of plans for a Aussie ford ranger

[@Espinal_424]

regarding the drawer slides. So did you just waste and waste a locking slide just to not have two locking on one drawer? Why not just buy a pair of locking slides and then a set of non locking?

[@user-wi2mi4sf8x]

Are you going to build a drawer system for the new Ineos Grenadier?

[@bulldog8934]

Can no longer find the plans or the flat pack system option… only way to buy that I can now see is over $2k

[@tx_reaper5973]

Are these available in plans for the DIYER?

[@adventuresinmichiganwlisa9852]

AWESOME👍💖👍GOT ONE FOR A 2019 FRONTIER SHORT BOX? IF SO, WHAT COST WOULD I BE LOOKIN AT?

[@shaweehillsworkshop4226]

depends on how long you want it. If you want it 42" or shorter it would be the same price as the kits on our website (link in the description) if you want it the full length of the bed I would need to know how long that is so I could price the extra wood and the longer drawer slides.

[@RevereOverland]

They're on the website now: www.overlanddiy.com/home/p/custom-size-drawer-system-for-large-suv-bjnrl?aff=2

[@patriotsleepercell4060]

Why do you use 3/4 plywood for the drawers? 1/2 would be much lighter the sliders hold up the drawers anyways.

[@nora-ub9yi]

Where are the plans purchased?

[@erickdiaz6152]

What about a system like this for the Wrangler JL ?!!

[@user-wi2mi4sf8x]

Are you going to be building a drawer system for the new Ineos Grenadier.

[@RevereOverland]

If someone takes it to them to scan, I’m sure they’ll make one

[@Snag114]

Wood like to see one for a 2010 jeep wrangler rebicon two door without back seat in vehicle

[@Espinal_424]

so question, how many total slides did you buy? I'm confused as to exactly how you used them. Because a set brings two of the locking slides with the blue lifting notch (left and right) im assuming. However you used the blue lifting notch on two different drawers. I'm sorry if it sounds like a dumb question but this project of mine has just been so frustrating lol that i dont want to keep making mistakes and making this take longer

[@bobbywhitler6288]

Would love to see a drawer set up offered for 1st gen sequoia

[@RevereOverland]

It's coming. There's also a generic "large SUV" drawer that should be on there later today.

[@jeffbettenga]

I assume you are really mostly interested in doing SUVs since doing pickup beds means a whole different level of weatherproofing. Your highest volume items would be 4 Runner plus variations, JK and JL's and now Bronco. You might get some sales for Grand Cherokee, and now maybe Bronco Sport but not nearly as much as the others. Maybe older gens of the 4 Runner?

[@MrWinger1951]

Good point, but I have a tonneau cover on my RAM 1500 so I would be interested in his kit, but I doubt it will become available to pick up trucks.

[@jeffbettenga]

@@MrWinger1951 Yes that or a shell would help a bunch with weatherproofing, I guess that would have to be in the fine print that it's for enclosed use only. Another thing about pickups is the tailgate would limit the tilt of the fridge slide, but it would still probably be plenty.

[@steveelkins52]

eek! how much does all that stuff weigh?

[@scottb4122]

Quick question, on a 5th GEN 4runner can the middle row seats still recline any at all with the drawer system in place or is it limited to the full upright position? Great video, thanks for sharing.

[@RevereOverland]

It’s designed for full upright

[@ii1825]

Absolutely love this! If you need a 4th Gen 4Runner to use for development I'm in Indianapolis. Any Jeep JL plans in the future?

[@RevereOverland]

We have a 4th gen lined up. The JKU and JLU will be after that!

[@wito1974]

👍

[@epicgemerman6969]

I like the project, how much for a first gen sequoia?

[@skiptonmcphee1669]

Hello, I havea a 2021 SR5 4X4, I took out the 3rd row seats, so will this system fit???

[@turboking2210]

Do y’all do the jeep xj

[@4runrJay]

So there’s no plans for 3rd gen 4Runners?… that’s a bummer

[@jackmarsh7328]

How long is the slider?

[@KamperKen638]

I wish it had a slid out work table.

[@RevereOverland]

Easy enough to add under the main drawer!

[@chrislewis384]

Hey mate whats the weight of these?

[@Espinal_424]

What were the measurements of the box from outside to outside horizontal and vertical?

[@musicofcorey]

I would highly recommend NOT drilling out the locks. It messes with the extension of the drawers and doesn't allow the 2nd arm to extend fully, if at all. This could lead to the right side of the drawer falling completely out. $70 mistake right here

[@raymondreynolds7846]

Are you going to be selling a kit to fit the Land Cruise Prado 150?

[@andrewenger7710]

Do you make a kit for a Polaris Ranger?

[@SamAminisam]

Would it fit in a land cruiser 200? I understand the wings would be different.

[@RevereOverland]

We have a 200 kit coming hopefully early next year. You can sign up for updates on the website!

[@SamAminisam]

great. I'll do that🙂 btw, is the finished height above the folded second row? adding a piece of plywood to make a sleeping platform.

[@RevereOverland]

@@SamAminisam on the one we designed for the 100 series we specifically made sure it was higher than the 2nd row so that you could add a sleeping platform!

[@jimorourke5390]

Would like to have a storage system designed for my 2012 explorer limited. Please advise.

[@officialWWM]

Make one for an XJ!

[@RevereOverland]

There are plans on the website for small SUVs - you just measure and pick the size you need! The only thing you'll be missing are the wings.

[@officialWWM]

@@RevereOverland awesome, thank you!

[@nora-ub9yi]

Do any of your kits work for a hilander?

[@SGT12XU]

Jeep JK Unlimited (sub woofer in floor) please.

[@henrikm4657]

Awesome project! Nice job. What’s the total weight of the system? If you sold a precut DIY kit, made out of t-slot aluminum profiles for the 5th gen 4Runner, that didn’t break the bank, I’d be all over that!

[@RevereOverland]

It's a little under 200 lbs!

[@jeffbettenga]

Are the 2 lower sets of drawer slides the same length. If so shouldn't you be able to save a small bit of money have a set of slides with locks and a set without and then combine one of each, also saving having to drill out a those rivits

[@shaweehillsworkshop4226]

The problem is the non locking slides in this weight class are only 1/2" wide instead of 3/4" wide which I can account for but it just looks weird having the drawers offset. When you bump up enough weight capacity to get into the 3/4" non locking then it's more expensive than just buying as a pair and modifying, especially when I buy in bulk from my supplier.

[@RevereOverland]

We actually tried that in our first set!

[@IronMountainPlumbing]

Does anyone know what kind/thickness wood they’re using?

[@bryamusa3]

Where can u buy the plans ?

[@currentlyhd7649]

3rd gen Tacoma please!

[@RevereOverland]

There are truck bed kits available now: www.overlanddiy.com/home/p/custom-size-drawer-system-for-large-suv-bjnrl?aff=2

[@kendallmilner5225]

Do you offer a kit for a 2011 Nissan Pathfinder?

[@lukelloyd2944]

I’ve been looking at drawer system for my Subaru Forester 2017 do you have a kit for it thanks Luke

[@RevereOverland]

Not specifically, but there are these: shwoffroad.com/product-tag/vehicles/custom-suv-vehicles/

[@chrisroothman2664]

How much does this system weigh?

[@BeachVolleyballWithAlex]

Need one for fj cruiser

[@AvatarSingh]

Is there a way I can avoid using the bottom ply or maybe use a thinner one to reduce weight on overall drawer system.

[@RevereOverland]

They’ve updated the design since this video so it’s as light as it can be without threatening structural integrity. They also released the Ultralight version which is about half the weight.

[@AvatarSingh]

@@RevereOverland can i have link to the updated video and the light material used that I can source locally. Hopefully no change to drawings that i purchased last night

[@RevereOverland]

@@AvatarSingh the drawings are the same if you're building your own. The manufacturing process on the assembled units they sell is updated to cut weight using their CNC router. The plywood you use it entirely up to you - SHW sources their own from Spain, and it can't be bought locally.

[@kisong9744]

Please, a drawer kit for 2021 Ford Transit Cargo.

[@RevereOverland]

Take a look at some of the generic options on the website to see which would fit. It just won't have wings!

[@saveriomacri7766]

Gq patrol swb please

[@andyackerman7123]

I haven’t decided what I will be doing with the back of my bronco, yet, but I’m sure that will be something you will want to design for…

[@RevereOverland]

Yup. We've talked about the Bronco!

[@shaweehillsworkshop4226]

Andy, are you anywhere near KY? If so hit me up!

[@RevereOverland]

Andy, that’s Wes, who designs the drawers.

[@andyackerman7123]

@@shaweehillsworkshop4226 I live in Tucson… but if you want a Guinea Pig, arrangements can be made. I don’t expect to take delivery until January, which I assume will work for everyone, given it’s the holidays

[@andyackerman7123]

@@RevereOverland I’ll become a Patreon, and we can discuss this further.

[@regularperson7]

Do one for an f150 since no one makes a good drawer system for them

[@RevereOverland]

www.overlanddiy.com/home/p/custom-size-drawer-system-for-large-suv-bjnrl?aff=2

[@The007jayzee]

How much for gx470 kit

[@FissionChips1983]

I heard you say GX 470. How about us GX460 folks? :)

[@RevereOverland]

We’re looking for a vehicle to test fit for the GX460

[@user-bn3uk8sf6d]

A kit for a zj 1997

[@sawyerbeals5105]

What type of plywood do you guys use

[@RevereOverland]

It’s an imported Spanish plywood that is the lightest 3/4” you can buy

[@sawyerbeals5105]

@@RevereOverland where can you purchase it? I’ve been looking at Baltic birch as well. I have a 3rd gen 4Runner so there aren’t many options for a drawer set.

[@precisiont5188]

I need something like this for my 2008 Ford E250 van. Any ideas?

[@RevereOverland]

Take a look at some of the generic options on the website to see which would fit. It just won't have wings!

[@precisiont5188]

I dont see any generic options. Can you provide a link?

[@precisiont5188]

In which state or country are you in?

[@gj0628]

Hey on web site it does say 80 series which do I order.

[@RevereOverland]

80 series is being developed this week!

[@gj0628]

@@RevereOverland ok thanks

[@sdl702]

How come you guys don’t have anything for a jeep wrangler

[@RevereOverland]

We’re constantly expanding the range we offer. You can sign up for updates, or check back over the next couple of months.

[@robertwilson1827]

Demand??🤔

[@loganmiller2371]

Toyota Sequoia 1st Gen.

[@RevereOverland]

shwoffroad.com/product-tag/vehicles/toyota/sequoia/