Fearless Luke decided to build a FliteTest Piper Cub RC plane using coreflute instead of foamboard. The results were "interesting". And where has our summer gone???
Пікірлер: 104
@didactylos4diddy4746 жыл бұрын
Another outstanding example of traditional club flying. Many people, often wielding cameras and invariably making 'helpful' and 'supportive' comments as the model misbehaves and plummets groundwards. Best place to test and learn to fly a new project is an empty field miles from the nearest observers :D
@lasersbee6 жыл бұрын
Yeah... If I had someone laughing at me and making Smart Ass remarks while testing a new RC plane... I'd smack him in the back of the head to smart him up.
@superdau6 жыл бұрын
+laserbee Wow, you must be a real fun guy to hang out with. No worries mate, none will laugh at you at the field, because there will be none there with you.
@didactylos4diddy4746 жыл бұрын
Wow! Not quite the reaction I expected. Having the extraction process is part of the fun of club flying. Especially if you are halfway up a large tree in retrieval mode. Or taking the walk of shame. The advantages in my experience are that there are more people around to help pick up the pieces when needed (all too often in my case). If I claimed I was innocent of similar banter I'd be lying. That said I do test fly away from the club. I don't fly well in front of an audience (or for that matter without one) :D
@lasersbee6 жыл бұрын
As a matter of fact I'm a long time member of 2 RC clubs and we don't have Smart Ass Asshats (Bruce) in our clubs... Instead we have members that know how to communicate with others in a respectful, helpful and positive manner.
@FPV-wi8fw6 жыл бұрын
lasersbee bit is way more fun having people making smart ass comments. I find it to be hilarious even when its me they are laughing at lol. Flying would be so dull without it 😁
@sipplix6 жыл бұрын
"Which way is it trying to spin?" .... "Towards the ground." Lmao😜
@ishigamiyu19912 жыл бұрын
7:41 "Which way does it wanna turn?" "Towards the ground" LOL I'M IN FOR THE COMMENTARY
@flyingpooch14656 жыл бұрын
Perhaps we need Nowak to chime in here to confirm what a righteous mode 1 sock tan that bloke has! Geez Louise, bro! Come to Texas so at least your foot tan will match the shape of your flip flops! All in good fun, man! Keep hanging with Bruce and continuing the build, fly, crash, repeat cycle and all will be right with the world. That same spirit/notion is what ALL hobbies are based upon! As a father of two teenage daughters (who could care less about my aviary obsessions), I enjoy seeing your son following along with you on a common journey of frivolousness!
@robertpayne92826 жыл бұрын
Beautiful hand made rc plane. Dial Down the rates and the throttle and pick up the speed a little and you are home free! Tough crowd to maiden around for sure.
@vlfreak6 жыл бұрын
great times, so punny too! have a great new year guys :)
@sunriseshell6 жыл бұрын
Love your dry wit Bruce!
@olliea60526 жыл бұрын
sunriseshell Agreed. Some comments here are a bit harsh. I'm sure Bruce would be way more 'serious' if it were an expensive model. I have heard him do this on other videos.
@PiDsPagePrototypes6 жыл бұрын
Agreed Blokes - those flying today can be the ones having a giggle when Bruce is doing the flying and others are behind the camera. Besides, aren't these sort of super-budget-friendly planes all about having a go and having a laugh? The Flitetest guys laugh at themselves even more when they're messing up.
@mstanbis16 жыл бұрын
Which thickness of corflute was used for the build on this? 3mm or 5mm ?
@MasboyRC4 жыл бұрын
Rons so cool as always
@scottfirman4 жыл бұрын
Some one suggested rudder use only, I agree. As I just built this plane for a friend, I think dumbing down the input to the controls may help 100 percent.
@thekaduu6 жыл бұрын
"Matches the color of the sky". hahahahhaha
@wamplertube6 жыл бұрын
I’ve been wondering how well the Coroflute would work. Sweet!
@AnchorsAweighNarooma2 жыл бұрын
Great fun was had by all
@RWBHere6 жыл бұрын
It looks tail heavy and/or the tail was stalling. It makes quite a good Pitt (Propeller Integrity and Toughness Tester) aircraft.
@rrane9212 жыл бұрын
Looks like it yaws left due to high P-factor when climbing. Propeller turns CW (viewed from cockpit). Oncoming air hits right side of blade at higher alpha than the left side, creating higher thrust on right side than left side. Opposite issue when descending. Other than using a smaller prop or changing the thrust angle around, there's not much to do.
@mihirpatel94605 жыл бұрын
I too tried with coroplast... I faced similar crashes too... It looked like i didn't control or it didn't responds to it.... But how did you made it fly back this good ?
@andreadellamico12173 жыл бұрын
lovely!
@OGTylerP6 жыл бұрын
Onewinglow....hahahha... almost spit me coffee out....
@johnnyj5406 жыл бұрын
I there an airplane magnet on that other side of the runway behind the fence?
@MrTerrymiff6 жыл бұрын
I had to go back and re-check at 2:20. Has he used Vero-Board as the engine mounting plate?
@manuelr.c6456 жыл бұрын
Muy bueno ese material gracias a segir intentandolo
@UAVfutures6 жыл бұрын
bruce how can I contact you mate to organise a NZ meet up
@xjet6 жыл бұрын
I emailed you.
@gelliot81566 жыл бұрын
UAVfutures Bruce introduced me into RC planes a couple years, and you convinced me to dip my toes into FPV. You both are excellent ambassadors for the hobby!
@UAVfutures6 жыл бұрын
I dont see it in my email bruce, uavfutures@gmail.com ?
@xjet6 жыл бұрын
Yep, that's where I sent it. You can get ahold of me at aardvark.co.nz@gmail.com
@Elnufo5 жыл бұрын
"One Wing Low" lol
@kevalinopicks55556 жыл бұрын
Classic!
@iforce2d6 жыл бұрын
angle of attack of wing too high...?
@hellspark6 жыл бұрын
I’m gonna say too heavy, and CG just slightly too far back! I’ve seen people increase the wing span on the Simple Cub in order to fix stability issues.
@bulltactv48095 жыл бұрын
hahaha "went a bit chinese on that one eh?! one wing low!" lol
@vonSchwartzwolfe6 жыл бұрын
needs to set the expo some. :) and come way down on the control surface travel. FT planes are very touchy and easy to over control.
@FarmerFpv5 жыл бұрын
With that much under camber using ailerons that's exactly how I would expect it to behave lol.
@followthewhiterabbit75044 жыл бұрын
Agreed! I'd give it more diehedral and fly it rudder/elevator only.
@PiDsPagePrototypes6 жыл бұрын
@ Luke the Pilot - get some FPV on there for extra nose weight. The foamboard FT use isn't available in Oz either, gonna have to try Coreflute myself now. Cheers!
@mrgreenswelding28533 жыл бұрын
Officeworks has foam board
@PiDsPagePrototypes3 жыл бұрын
@@mrgreenswelding2853 :( Nothing over 500x700mm
@choll44466 жыл бұрын
these top-wing Flitetest cub/trainer designs tend to be a bit tail heavy, due to the mass amounts of hot-glue used at the tail end of the craft...
@budmartin82975 жыл бұрын
mine's not, it flies like a dream, especially after 40 or 50 unplanned hard landings. Try more down thrust to see it really shine.
@wwmoggy4 жыл бұрын
built a few flight test planes most are nice flyers I have the FT Pietenpol coming in the mail soon
@hipeoplesSr6 жыл бұрын
bahhahaha "are the lights working yet I can see many hands"
@johngreenferguson80556 жыл бұрын
When these kids fiddle with their sticks too much on landings, Ron needs a ruler to smack them on the knuckles!? LMAO
@RedstonePyroMan6 жыл бұрын
It's way over stable on the roll axis because the landing gear is lowering the vertical CG to ridiculous lengths
@mrlamud6 жыл бұрын
Lovely people.
@sadpotato4246 жыл бұрын
i bet that thing is near indestructable
@nsschmid6 жыл бұрын
Tail draggers ground loop with too much throttle and not enough air speed. Try elevator up until you're really cooking then let it go to center. Tail comes up and your plane takes off.
@TanM4 жыл бұрын
I know he painted that orange prop White.
@grumpyjohntxredneckrc63465 жыл бұрын
C@@L Kinda Like A Horizon Champ! Nice... Thanks
@EnuffsEnuff3186 жыл бұрын
Took pants off and he came out straight.
@Umaransari-ny6yo5 жыл бұрын
just one correction..and plane will fly normally...every crash of your plane is due to improper handling of the aelirons .. remove the aelirons..because you r not able to handle the aelirons...use rudder for turning and plane will fly smoothly
@nivesknight4 жыл бұрын
Cloudy days are good days to see a colorful airplane?
@anandbarve226 жыл бұрын
CAN YOU SEND MI THIS PLANE DESIGNE FOR CORROFLUTE
@platterhof6 жыл бұрын
omg luke :D
@iscluiscaduk6 жыл бұрын
I’m still not a proficient pilot for that type of landing... LOL.
@CappyPommie6 жыл бұрын
:-D "It was a bit Chinese at take off ... one wing low"
@JohnSmith-vs2ri5 жыл бұрын
5 deg down thrust and 3 deg right thrust should fix it!
@1asdfasdfasdf5 жыл бұрын
did a second take when I read the title. It's known as Coroplast in the states.
@steveh.91704 жыл бұрын
coro cub from SPAD to the Bone
@Lance17396 жыл бұрын
Chinese take off "Whan wing lo" hahahaha!!!!! so awesome
@Smt_Glaive6 жыл бұрын
Bloody tail heavy
@tlee94846 жыл бұрын
You'll get it right, it looks great.. ( one wing low, )LOL...😑
@jimmyhaley7272 жыл бұрын
heheheh and Bruce gets torched,,,,,,,,,,,,, so when did you last build something,,, ehehheeh
@AkoyTamad6 жыл бұрын
The plane's heavy. Needs more power.
@jack00scarecrow6 жыл бұрын
well it looks like a plane at least
@your2nd3 жыл бұрын
Two things wrong (1) tail heavy (2) need to point the motor 3 to 6 degrees to the right , motor should be ccw.
@reyadv16018 күн бұрын
Check your CG
@Manish-nh5ok5 жыл бұрын
Your motor is making throttle which is not good u have to eliminate throttle
@umontakahashi95284 жыл бұрын
Too much torque with this motor, that's why it tends to the left when you give power. Plus it's very tail heavy. Regards
@bessybessy6 жыл бұрын
I think that is tail heavy, to big and heavy motor, to big propeller, to much for small depron plane.
@sunriseshell6 жыл бұрын
bessybessy Not Depron or foamboard, it's coroflute (Coroplast).
@AlymerKiteboy5 жыл бұрын
@@sunriseshell coroplast
@sunriseshell5 жыл бұрын
@@AlymerKiteboy Yep
@vitosanto38745 жыл бұрын
It's to tail heavy.
@daveday55076 жыл бұрын
Too much tech in the transmitter and not enough in the model.
@gregclare46956 жыл бұрын
wayyyyyyyy too much travel on the surfaces
@hitekredneck10911 ай бұрын
I watvh these videos to see everyone except xjet. It takes a soecial pos to talk crap about a guys plane when his kid is there with him.
@xjet11 ай бұрын
I play to my strengths! :-)
@Esteban_Pascazzi_LU8ATK5 жыл бұрын
Bad CG
@lasersbee6 жыл бұрын
These videos are a lot more enjoyable without listening to the Sound.Noise....
@ostidetabarnak6 жыл бұрын
do you ever listen to yourself and think - wow im a total a-hole ?
@lasersbee6 жыл бұрын
Well said............Couldn't agree more...
@deegeetee6 жыл бұрын
Is that sound of grinding axes I hear?
@gailraby17226 жыл бұрын
Bruce is an amazing man, funny, knowledgeable, supportive and kind, if you don't understand that you don't understand "friendship"
@JohnSmith-vs2ri5 жыл бұрын
Turns out that is how grown up, emotionally secure men talk to each other over here.
@theoztreecrasher26475 жыл бұрын
For Sir Crashalot's more refined sense of humour and mateship I suggest you search & watch "proximity with sergio"! ;-)