This is the best design I have seen!!!!!! Building mine this weekend.
@FFHTV2 ай бұрын
That's awesome! Thanks laserlife3065! 😊👍
@rymillar8126 Жыл бұрын
Thought I'd stop and thank you. I made mine from electrical metal conduit and joined Them with parts for pipe maker. Works awesome.
@FFHTV Жыл бұрын
That is awesome! Thank you so much for that! 😊👍
@jessedavis76704 жыл бұрын
By far the best one I’ve seen. I’ve been watching a lot of DIY on carts. Great job
@FFHTV4 жыл бұрын
Thanks Jesse! I appreciate that! 😊👍
@vientran81093 жыл бұрын
Same here
@FFHTV3 жыл бұрын
Thanks Vien! 😊👍
@savageuknowwho1003 Жыл бұрын
I like this, even thinking about making it interchangeable for a pair of thrusters
@FFHTV Жыл бұрын
Thanks! A pair of thrusters would be something to see for sure 😊👍
@Degenhardt4509 күн бұрын
What an awesome idea
@FFHTV6 күн бұрын
Thank you! 😊
@teranczagozewski79593 жыл бұрын
That’s pretty sweet. With your design it gave me an idea for making it also attach to outriggers.
@FFHTV3 жыл бұрын
That's awesome! I'm glad the design has inspired a possible new mod 😊👍
@johntsan7429 ай бұрын
Best one yet. Thank you very much for sharing.
@FFHTV9 ай бұрын
Thank you too! Glad you enjoyed it! 😊👍
@OldLadyAngler4 жыл бұрын
Looks like a great design John.
@FFHTV4 жыл бұрын
Thanks Tracy! My collection of medical walkers continues to grow lol! 😉
@OldLadyAngler4 жыл бұрын
@@FFHTV hahahaha. You been fishing lately?
@FFHTV4 жыл бұрын
😔 Sadly no as my care taker role has only increased exponentially but I remain positive and hopeful that my situation will eventually change and lead up to more free time to fish in 2020.
@OldLadyAngler4 жыл бұрын
@@FFHTV Praying for you John.
@FFHTV4 жыл бұрын
Thank you Tracy. That really means a lot to me 🙂
@thiodorchalkias8906 Жыл бұрын
Nice structure!!! Congratulations!!!! Thanks for sharing!!!! I notice that exists already a rectangular aluminium hollow bar on your kayak. I don't know the use but it looks "free". So .... you could use to install two curved rectugular legs one per each end of the existing bar with the same weels avoiding all the extra job!!! Additionally the kayak could be stay more up in order to protect the steering fin when you go at a ramp!!!! Think about.... Have good time every time!!!! Best regards from Hellas (Greece)!!!
@FFHTV Жыл бұрын
Hi Thiodor! Most people just want a much simpler method that they can easily make to move their kayak which is why I made this video but yes, the square aluminum tube that you mention is used as the main method for transporting this kayak which I show in this video: kzbin.info/www/bejne/jYWuaWN4iN5sZ6c 😊👍
@letun34813 жыл бұрын
Good engineering!
@FFHTV3 жыл бұрын
Thanks! 😊👍
@MAM..8884 жыл бұрын
Ya lo había visto antes hecho por un americano , pero como siempre, usted siempre tiene una forma de hacerlo con un toque especial. Great job 👍👍👍
@FFHTV4 жыл бұрын
Gracias mi hermano! 😊👍
@MAM..8884 жыл бұрын
Le tengo hechos algunas modificaciones únicas a mi hobie pa 12 , que me gustaría compartir con usted Bruno. Si hubiese alguna forma de hacérselo llegar?
@FFHTV4 жыл бұрын
¿Puedes compartirlos por email?
@MastersMagazine3 жыл бұрын
Love it. Great idea, brilliant.
@FFHTV3 жыл бұрын
Thank you! 😊👍
@oilheating2142 жыл бұрын
Ok my grandma won’t miss her walker much lol
@FFHTV2 жыл бұрын
😄 Well... I don't know about that but you can usually find walkers for a couple of dollars at your local goodwill store. 😊👍
@ruthdoyle90853 жыл бұрын
Some little old lady is still looking for her walker 🤪
@FFHTV3 жыл бұрын
I agree! 😊👍
@charlieboutin33413 жыл бұрын
Awesome design!👌. I’ll be brainstorming off of this. Thanks for sharing your great idea! 👍👍
@FFHTV3 жыл бұрын
You're most welcome Charlie! Thanks for watching! 😃👍
@SundayViewFishing3 жыл бұрын
Nice video man! Very detailed! And nice music selections too! hahaha
@FFHTV3 жыл бұрын
Thank you so much 😃👍
@johnguth53762 жыл бұрын
Very inovative!
@FFHTV2 жыл бұрын
Thanks John! 😊👍
@SHWELL114 жыл бұрын
Nicely done!
@FFHTV4 жыл бұрын
Thank you sir! 😊👍
@chuanne2 Жыл бұрын
GENIUS!
@FFHTV Жыл бұрын
Thank You! 😊👍
@edselharrison3 күн бұрын
Very clever!! How has it held up?
@FFHTV4 сағат бұрын
Thanks edselharrison! It has held up great. No issues at all. Thanks for dropping by to check out the video and leaving a comment! 😊👍
@kennethlopez94364 жыл бұрын
Thanks for sharing sir, great design so far on KZbin 👍👍
@FFHTV4 жыл бұрын
Thank You! 😊👍
@andrewcalma2693 ай бұрын
Nice
@FFHTV3 ай бұрын
Thank you! ☺️👍
@jamessilverman48873 жыл бұрын
Nice build. What did you use the square tube for? Is there a video of that build?
@FFHTV3 жыл бұрын
Thanks! The square tube was for making the base to mount Boonedox landing gear legs. Here is the video link to that: kzbin.info/www/bejne/jYWuaWN4iN5sZ6c
@Goosenator6362 жыл бұрын
Great DIY Project. I was looking to do something similar to the Boonedox but not the price. Great build. Is there anything you would have done different now that you have had it a few years.
@FFHTV2 жыл бұрын
Thanks McCann! I would not change a thing on that build. 😊👍
@pedrocordero7898 Жыл бұрын
Are you doing another video of putting it in the water with that landing gear?
@pedrocordero7898 Жыл бұрын
Great job BTW
@FFHTV Жыл бұрын
Thanks pedro! I only have a snippet of it in a video that my brother in law shot while I was towing him in... kzbin.info/www/bejne/nau0i2uLZ6uAmrs
@pedrocordero7898 Жыл бұрын
@@FFHTV now I know why your brother-in-law had problems with his pedal drive, it was that Yankees hat but he was wearing......lol.......go Mets!!! By the way where are those canals that you guys were located at. What state are you in?
@FFHTV Жыл бұрын
😂 Lake Monroe in Florida 😊👍
@pedrocordero7898 Жыл бұрын
@@FFHTV where did you launch from??
@donsloat62994 жыл бұрын
I finally located a walker at a reasonable ($10) price and now to get the other components together....have you found any other wheels that are worth trying or are the C-Tug Kiwi on Amazon the best deal?? Didn't look at the cost of the one component that may be most difficult to find....wheels...(wasn't thinking the wheels would be over $50)
@FFHTV4 жыл бұрын
I really did not look around for wheels since I already had 3 pairs that had the right size hole to fit that one inch diameter aluminum tubing. What I would suggest is to go to your local hardware store or harbor freight and see if you can find wheels with a large solid plastic hub area so the hole used for its axle can be sized up to a 1 inch diameter opening.
@donsloat62994 жыл бұрын
floridafishhunter Yeah, that's my plan...I need to make a run to harbor freight anyway (1hr drive, so I make a list, lol). Thanks!
@EyeLoveFishing4 жыл бұрын
Looks promising for most part besides through time and going through rougher terrain the PVC will most likely break
@FFHTV4 жыл бұрын
Pvc is very resilient. UV light degradation is the main culprit when using pvc in an outdoor environment so painting the pvc tubing will eliminate that problem and help it maintain its strength and integrity.
@Didmy305 ай бұрын
All looks great. One question. Does the wheels get in the way of paddling? Looks close.
@FFHTV5 ай бұрын
Thanks Didmy30! I can tell you that it absolutely does not get in the way of paddling - not even close. 😊👍
@schambers83014 жыл бұрын
Does it add much stress to the tracks...?? Would it work with a Kayak that is 95lb.? How has it held up?? Great Video.. was very easy to understand...
@FFHTV4 жыл бұрын
Hi S Chambers! There is no load or stress to be concerned with on the tracks. All the weight and load of the kayak is on the axle itself when deployed. The pivot mounts that are on the tracks are just there to maintain axle position when moving after deployment or when flipped up to store on the top deck of the kayak. The Slayer 10 shown in the video weighs in at 81 pounds with just the seat and propel drive mounted. Once all my other gear is added I am absolutely sure that it's way over the 100 pound mark and have had absolutely no issues at all to date and has held up perfectly. I hope I have answered your questions and thanks for liking the video. 😊👍
@flamingomtn4 жыл бұрын
Excellent video. If I'm seeing correctly, there would be enough parts from one walker to make two axles, right?
@FFHTV4 жыл бұрын
Thanks Marti and yes I believe you are correct. 😊👍
@JohnKlopp4 жыл бұрын
Genious! 👍
@oilheating2142 жыл бұрын
Can I use a pipe cuter to cut that
@FFHTV2 жыл бұрын
Pipe cutter... I don't see why not... 😊👍
@cullemallkayakfishing95633 жыл бұрын
Do you think 1" PVC in place of the aluminum would hold up? I have the same yak and already have c-tug so the wheels wouldnt be an issue. If so could you tell me what the width of the axle would need to be? Thanks!
@FFHTV3 жыл бұрын
Pvc flexes too much for me which is why I went with aluminum but you are more than welcome to try it out and let me know your results. My axle width is currently 58 inches. 😊👍
@tims.599510 ай бұрын
Those wheels are sexy AF 👍🇺🇸🇺🇸🇺🇸
@MikeJordanUnCamplicated4 жыл бұрын
Did you make the saddle "T" , or did you buy that somewhere?
@FFHTV4 жыл бұрын
I purchased them at Lowes. Here is the link: www.lowes.com/pd/LASCO-1-in-x-3-4-in-90-Degree-PVC-Sch-40-Tee/3371266
@MikeJordanUnCamplicated4 жыл бұрын
@@FFHTV Awesome! Glad I asked
@pa12643 жыл бұрын
Awsome video thank you sir.
@pa12643 жыл бұрын
Your kayak looks nice and wide probably wider than my hobie mirage compass kayak kayak.
@deathmine4744 жыл бұрын
Think this design is good for the pa14?
@FFHTV4 жыл бұрын
Honestly... I would have to say "Probably Not" mainly due to the sheer weight of the pa14 especially when loaded down with gear but if you do decide to use this method I would love to see how it works out for you. 😊👍
@novars86104 жыл бұрын
I'm having trouble seeing how u got from the original axel build to what u ended up with. you never showed what was involved
@FFHTV4 жыл бұрын
As an option, a second inner and outer tube was added to the center section of the original axle build and felt that it was not necessary to have to include this step in the video but I guess I was wrong...
@mysteryman90204 жыл бұрын
I see by the wheels somebody else gave up on their C-Tug.
@FFHTV4 жыл бұрын
😆 That somebody would not be me lol... I love the c-tugs. I own (2) of them that I use specifically as a doubled up cart for my Hobie Tandem Island. 😉
@chrischase67313 жыл бұрын
Did you know a werewolf worked on your kayak?
@FFHTV3 жыл бұрын
Yup and he’s awesome! :)
@getoffyourbassandletsfish76514 жыл бұрын
Well tried to make this but the old lady using it kept hitting me with her Cain so cant get the walker yet 😔 😉 😂
@FFHTV4 жыл бұрын
Well at least you tried... 😊👍
@chuckmatses68032 жыл бұрын
Wait what’s with that so called music? That’s not any kind of fishing song, eeesh…