Here is a really awesome compressed air kit if you are looking for one! ► amzn.to/3vD9zxf
@MrMattDat11 ай бұрын
Very cool. A few items that will help prevent the rust even more: 1) spray it inside lowest 3-4 inches of your doors and fenders (front and back). There are videos showing how to do this or you can buy the FF Professional sprayer and buy the stuff by the gallon. 2) When you get a few warm days in the mid/late winter, grab a can and give the underside of your car a spray.
@KurtofTrades11 ай бұрын
It’s really great! I got it in the doors and hatch too!
@JamesThomas-dn6hz9 ай бұрын
Note that he is using the shaker cans, which is proven inferior to an actual spray gun application. It's still great, but they thin the product, so it comes out of the can. I bought a gun and spray all of my families cars ever fall (7 vehicles) for the past couple of years, and it is 100% worth it! A 5 gallon pail gets you 7 to 9 vehicles with a heavy application.
@dylanbrown3840 Жыл бұрын
I have talked all my friends into using this. I have done my tacoma every year since 2021. This stuff gets everywhere. We did my friends 4runner a week ago I helped him and my truck was covered in it.
@grottu25 күн бұрын
My current pickup is from 2020, when new ive used 4 or 5 cans of that stuff and recoating with 2-3 cans every year wherever road water washes it out. Zero rust on underbody, not even on all lines or small brackets. Its good idea to drive over some gravel roads, its mixing with dust and creates nice coating. Living in Alberta Canada its more then impressive
@jasonvu246614 күн бұрын
That's awesome! I'm trying to do the same with my titan. Does it usually take about 2 or 3 cans for the whole thing? Also do you spray your brake discs?
@muzhikforchaplin1203 Жыл бұрын
At this rate, besides the brakes, at 30 years old it will be in the same condition as a car that didn't use fluid film for 1 year!! I love this stuff!!
@KurtofTrades Жыл бұрын
It really is an amazing product
@JamesThomas-dn6hz9 ай бұрын
💯 it's a must!
@shadowman1992 Жыл бұрын
I live in Michigan too and just started applying it to both my cars the other day. I let the car sit for at least 24 hrs after i apply but with all this rain we got i get worried it comes off but when i check its still all there.
@jeffruebens8355 Жыл бұрын
I use Fluid Film for motorcycle chains, but I live in an area with limestone rock and softer dust than other areas. For cars best to get a long spray wand to get inside doors and fenders through holes with plastic caps added, and like you said touch it up every fall for areas with lots of winter road salt.
@KurtofTrades Жыл бұрын
Those sprayer extensions are pretty good, they make 360 degree nozzles for them
@Colorado_Native Жыл бұрын
@@KurtofTrades I have an 18 year old Jeep Grand Cherokee and currently live in PA. I even drilled small holes in the frame and used a long spray hose. I even took off the door panels and the rear hatch panel and sprayed in there. This stuff seems to work pretty well.
@tonyb77488 ай бұрын
We use fluid film part A and B in 5-gallon buckets (paste and film) for shipping container repairs and service vehicle protection. Good stuff for Sure! Another excellent product for friction that never gets much spotlight is Slip Plate Graphite lubricant. We also use that for door seals and areas that make the container doors hard to open.
@rvrmitsugt61 Жыл бұрын
I Have my 2023 Crosstrek covered in fluid film and, it has already been through a salty Alberta Canadian🇨🇦winter❄️🧂 and other than the dirt stuck to the oil it looks just as the good as the day I picked it up! Meanwhile another friend of mine with the same car only exposed 1 season to the salt (without fluid film) and you can already see the surface rust forming 😬where as mine still looks brand new! 😇. I am very happy to be able to see the proof in the pudding! Thanks for making this video :) and I will continue to oil and hopefully drive mine for years to come! 😝
@KurtofTrades Жыл бұрын
It’s amazing how bad cars can rust in just one year isn’t it? I still never understand why some people done use an undercoating
@user-wo7rz3yn4o Жыл бұрын
Good lord it's only a 2023 it better not being g showing rust!
@supernova19768 ай бұрын
Ford Focus from that generation is very well known for rusting :) i had one for few years, really nice and reliable car. lived in the desert had no rust.
@banshee898911 ай бұрын
Connecticut here. I love fluid film I have found the best results if you dont wash the undercarriage of your car once you use fluid film. Started using it on my wife jeep when it was new in 2016. I do it twice a year.... not a spot of rust. Again, my wife never washes her vehical and I honestly think that helps the fluid film. People who absolutely love to wash there cars and get them squeeky clean every week.... its probably not for them. I would like to point out that here in the rust belt.... washing your car will not stop the rust. It helps if you do it yourself. But these automatic carwashes do more harm than good in my opinion. Unfortunately I went 10 years on my dodge caravan before discovering fluid film. The rust already took hold before I started. 18 years later Im still driving it. I think the fluid film did slow the rust down, but not stop it. The best bet is to start from a brand new car.
@camelblue713 Жыл бұрын
Thanks Man! Please continue this Test :)
@KurtofTrades Жыл бұрын
Will do!
@Soupdoid20 күн бұрын
Pretty sure I need to do this to my 2007 Rav 4 sport. The doors need it here in Nova Scotia...
@Aircooledflat4bug4 ай бұрын
Only question I have, is how effective is it when applied over existing surface rust? Does it slow it down? Does it fall off or peal off like non lanolin products?
@KurtofTrades4 ай бұрын
It stays on rust pretty good, if it’s light rust it helps a lot, if it’s deep rust nothing will really help other than getting new metal.
@notsofast5495 Жыл бұрын
do you just spray it on the exterior panels like you did in your video or do you spray the door seams and inside the holes in frame?
@KurtofTrades Жыл бұрын
No I was just doing that for demonstration, underside and inside the doors.
@Boodieman7211 ай бұрын
You can get FF in other forms than spray cans. You can get it in 1 gallon, 5 gallon and 55 gallon sizes.
@kevinkozlowski1463 Жыл бұрын
curious about when it creeps on the paint- I'm assuming then dirt sticks to it- Then when you wash it off of the brush, how bad is it scratching the paint?? Great videos though Going to apply some to my truck thanks
@KurtofTrades Жыл бұрын
My cars white so they don’t really stick out, I haven’t noticed any deep scratches. Surface shield is really terrible to get off of paint though
@jknights306 Жыл бұрын
Just did my daughters 2018 impreza. What really surprised me was how much road dirt was built up on top of plastic undercarriage of the impreza
@210works Жыл бұрын
Is it suitable to spray directly on rust or paint? One of my car's fenders is beginning to rust and paint is flaking off, would like to hold it off the best I can this winter until I can get it fixed. The underside is perfect though...
@KurtofTrades Жыл бұрын
Yes it will work fine. It will slow it down some but is more of a preventative for before it gets that bad.
@210works Жыл бұрын
@@KurtofTrades Thanks and very helpful video.
@lokerola Жыл бұрын
Love the Fluid Film on my WRX!
@RTCompany Жыл бұрын
I have a 13 Legacy that’s lived every winter in Ohio. Has moderate rust underneath, lots of paint on frame/suspension components turning into surface/hopefully not penetrating rust. Has the typical Subaru rust forming on the rear wheel well where it meets the bumper too. Is it too late for fluid film? Do I need to prep or can I spray it directly over?
@KurtofTrades Жыл бұрын
I wouldn’t bother. To fix it you will need to weld in new metal, it’s likely much worse underneath on the strut towers. Fluid film won’t hurt but it’s too far gone to make much of a difference
@jerrylazaris889 Жыл бұрын
Does it degrade trims and rubber parts if over spray hits them? Fluid film specified that oil resistant parts are safe from over spray,but how am i suppose to know if these parts are oil resistant?
@KurtofTrades Жыл бұрын
Haven’t had issues with any trims or rubbers. Seems almost everything on the underside of vehicles is oil resistant.
@Yeshua737322 ай бұрын
Is it ok to lut over the laint work to protect it from rust like doors bonnet ect
@Silveradocowboy9 ай бұрын
What caused it to stain your exterior door and rocker panel? I don’t see it staining anywhere else on your exterior? I want to prevent that if I can when I apply it.
@KurtofTrades9 ай бұрын
It creeps out from the areas that are sprayed. I sprayed in the holes at the bottoms of the doors and inside the rockers. It easily wipes off
@Silveradocowboy9 ай бұрын
Great videos by the way very informative. Thank you for the reply! 😊
@vincentnichols402 Жыл бұрын
Keep up the Good work!!! I do the same on my 92 740 VOLVO WGN i have no Rust people want to no if my VOLVO came, from Forida😂🤣 ive used fluid film for 6yrs when car was new i used old motor oil for the firsy 25yrs im in salty Boston
@KurtofTrades Жыл бұрын
Good stuff!
@jacob112123 күн бұрын
Really anything that is oily and sticky will work.
@adammcinnes56155 ай бұрын
For the smell, I read somewhere that someone mixed an oil based Glade air freshener into their 1 gal can of Fluid Film, so instead of smelling like lanolin, the vehicle smelled more like apple cinnamon. I have no idea if it works, but it could be interesting to try.
@freddyhollingsworth594510 ай бұрын
need to remove the door panes and spray fluid film on the inside bottom of the doors....they rust from the inside out from salt washing down into the doors..
@KurtofTrades10 ай бұрын
If you spray in the drain holes at the bottoms it has the same effect, but yes getting inside the panels is very important
@shadowman199210 ай бұрын
Dude I live in Michigan too what do we do the weather is starting to get up into the 40s again. Do we rinse the fluid film off or wait until the end of winter ? These temperature changes have me confused. Help lol
@KurtofTrades10 ай бұрын
I don’t wash the underside at all until spring. You Could with a hose but I wouldn’t use a power washer
@shadowman199210 ай бұрын
@@KurtofTrades would you wash the body of the car ?
@SIBUK3 ай бұрын
Thats crazy! I did hear that it creeps, but this is the first video I've seen that shows the extent of it. It didn't realise it happened to this extreme. How did you spray the inside of your doors? Did you remove the inside door cards or did you spray it in through holes? I'm going to be doing mine using a spray gun and I'm concerned about spraying it in through holes in the doors because I dont want it going all over the glass and the window winder mechanism.
@KurtofTrades3 ай бұрын
It’s really good stuff. For the doors I sprayed in from the bottom drain holes using the straw that comes with the cans.
@JC-tb8gv Жыл бұрын
If it’s sprayed on the clear coat accidentally, does it wipe off easily?
@KurtofTrades Жыл бұрын
Very easily.
@jimj268311 ай бұрын
Is there a way to stop the fluid film from creeping onto the paint? I don't want to ruin the clean look of my new car.
@KurtofTrades11 ай бұрын
Don’t spray it close to the painted surfaces. If you don’t spray it directly on the paint then the creep wipes off pretty easily.
@trevorzhang9988 Жыл бұрын
What about Woolwax®Spray? Any better?
@KurtofTrades Жыл бұрын
Haven’t used it but I have heard good things about it, I think it’s nearly identical
@martinmorris6271 Жыл бұрын
It is same type of product much thicker harder to wash off both great products.
@Crowbar3818 ай бұрын
Unless it’s being constantly being fed to and applied to the brake rotors as you drive, it won’t affect them or your braking.
@whatitisnt. Жыл бұрын
At 7:44 do you mean don't wash the undercarriage after fluid film permanently or just few months/weeks/days while it dries?
@KurtofTrades Жыл бұрын
Definitely not the first month but there’s really no reason to wash it at all in the winter.
@whatitisnt. Жыл бұрын
@@KurtofTradesany recommendations on applying it? Do you just use a 3 ton jack and a few jack stands?
@ToreDL874 ай бұрын
@@whatitisnt. use a jack and a jackstand. Get some of those hoses and nozzles for this kinda stuff and put it through framerails & rockers, there should be holes covered by rubber plugs, pry those out with a screw driver. Once applied, put the plugs back on.
@andyl99203 ай бұрын
I sprayed fluid film inside my doors (bottom, behind the rubber) and rockers and now my car smells like mildew, is this normal? It reeks, especially when my vehicle sits in the hot sun for an hour or longer.🤮 i feel like i will need to clean the fluid out and just spray some rustoleum....what would you suggest i do? The smell is so bad to the point where i could barely sit in my vehicle for that long.
@KurtofTrades3 ай бұрын
It will go away in a couple days.
@jeffreyheuser9503 Жыл бұрын
If these products are "sticky", dirt affixes to the undercarriage. Does the dirt eventually "wash off" exposing what we are covering? Thank You!
@KurtofTrades Жыл бұрын
The dirt doesn’t really affect how the product works it just attaches to it. The product still makes a barrier wether or not it has dirt on it.
@vincentnichols402 Жыл бұрын
Dirt holds the oil on better.
@semoemo1 Жыл бұрын
Gotta get a sponsorship!
@user-st5rc9nz4j10 ай бұрын
Why spray it on the outside paint??
@KurtofTrades10 ай бұрын
Just showing how the products apply. It’s harder to see on the underside of the vehicle
@Hunterhunter-ir9nz10 ай бұрын
Do you need to pressure wash the undercarriage before using this product?
@KurtofTrades10 ай бұрын
It’s not required but I would. Make sure it’s really dry after before sprayinf
@Hunterhunter-ir9nz10 ай бұрын
@@KurtofTradesThank you
@QuantumMuch Жыл бұрын
So do you apply it every year? I am on my second year of using it, i degreased the undercarriage, let it dried Andthan I reapplied again, should I be doing that every year?
@KurtofTrades Жыл бұрын
Yes every year it needs to be reapplied. I don’t usually degrease the underside I just spray more on over the top. Either is fine though
@QuantumMuch Жыл бұрын
@@KurtofTrades fair enough, thanks for the quick response:)) I’m honestly impressed with this stuff
@John_Ridley Жыл бұрын
Fluid Film specifies re-application every year. Not degreasing, just a touch-up where it's gone or where there may be rust starting. Surface Shield is a bit more durable and specifies a 2 year touch-up interval.
@alfreddoumtaz2154 ай бұрын
Very interesting and very variated chanel.
@whatitisnt. Жыл бұрын
Phenomenal essential review
@countschadАй бұрын
Will your car get rust if you live in the rust belt?
@Matthew-ym2bb8 ай бұрын
Is this only to be used under the car?
@KurtofTrades8 ай бұрын
That’s what it’s made for yes, it won’t hurt the paint though.
@BRZBigInJapan Жыл бұрын
Very informative, thanks.
@haystephen Жыл бұрын
Is it too late to apply it in late November early December?
@KurtofTrades Жыл бұрын
No it’s not, usually it’s better to apply before the salt starts flying though.
@ScanianDude Жыл бұрын
I wonder how fluid film compares to cold pressed linseed oil, seems very similar at a first glance allthough linsseed oil smells like a wood workshop
@ToreDL874 ай бұрын
Pretty much the same thing. Old timers used to put on old motoroil then do a drive out on dry dusty country roads. Practically, anything you apply is better than nothing, a new car in the rustbelt (N.Y and the like) is gonna be toast after a few years because the rust will have gotten a solid hold. You can brake/delay/slow down the rusting process with fluidfilm/oil products, because it denies the rust the oxygen it needs to thrive, but eventually the rust is gonna win out.
@chucklucas87473 ай бұрын
Its doing its job
@exploreiceland3 ай бұрын
I'm raised on a sheep farm. If some of the Fluid Film gets inside the car, it will smell just like the part of the sheep shed where we kept the smelly rams. 🐑
@deecee7820 Жыл бұрын
Would fluid film or surface shield cause rust over time since mud or dirt sticks to it over time? I sprayed my subbie with them and the underbody is caked with dirt .
@John_Ridley Жыл бұрын
I wouldn't think so, mud and dirt don't cause rust. Water and salt do. You will get dirt stuck to it but that shouldn't actually cause any problems.
@de3429 Жыл бұрын
@@John_Ridley Dirt and debris might trap salty water though
@redgeminipa3 ай бұрын
@@de3429 No. It will help repel/displace salty water. Part of how this works is water won't stick to it. Mud consists of water and dirt.
@_UnknownDeath_8 ай бұрын
Car detailers are Screaming right now from the Scrub Brush on the paint.
@KurtofTrades8 ай бұрын
😂 you are correct! I usually don’t do that haha
@richwilson70175 сағат бұрын
I love fluid film. I would put it in my cereal if it tasted good. !!!
@KurtofTrades2 сағат бұрын
🤣
@maytagfixer2 ай бұрын
Rocker panel...not fender.
@ajgulisano7353Ай бұрын
I'm pretty sold because that's a Subaru.
@bobdailey9735 Жыл бұрын
If it's gonna creep out to the outside surfaces it's not a product I would want to use. Car will look like crap and needs to be scrubed by hand. No thanks.
@KurtofTrades Жыл бұрын
I figure the car looks like crap all winter anyways from the snow and salt so not that big of a deal 🤷♂️
@Realdogday727 Жыл бұрын
Rust out your car
@ToreDL874 ай бұрын
Goodbye to your car and the 40k mortgage you have on it then, hope it looks good for the little while you'll have it.