Flysky NB4+ and NB4 Pro + Receiver choices.

Welcome back to Wtf Rc Cars
Flysky NB4+ and NB4 Pro + Receivers
FGR4 V2
s.click.aliexp...
soarskyrc.com/...
FGTR10
s.click.aliexp...
soarskyrc.com/...
fgr4b
s.click.aliexp...
soarskyrc.com/...
fgr8b
s.click.aliexp...
soarskyrc.com/...
FGr12B
s.click.aliexp...
soarskyrc.com/...
Ftr12b
s.click.aliexp...
soarskyrc.com/...
Fgr4D
s.click.aliexp...
soarskyrc.com/...
Fbr8
s.click.aliexp...
soarskyrc.com/...
CNHL batteries discount code craig5%off
chinahobbyline...
Contact me at [e-mail]
Kits available from
rdmodels.co.uk/
399 Sheffield Road,
Chesterfield
Derbyshire S41 8LS
01246 942777

[@TDHobbies]

I want to send a sincere thank you! I feel that you made this video especially for me as I have just purchased the NB4 PRO + and found out it does not bind to just anything and I have asked you a few questions on other videos. Thank you for replying to those BTW, you are one the KZbin persons that actually cares about content and your viewers, not just the numbers. Many of us do not have much money and these radios are up there in price so we want to make the most out of them, your instructions help us do just that. I wanted to tell you I have been a modeler for many years and have tons of spares (mostly airplane and helicopter stuff) so I 3d printed a little test bench that holds 8 servos and a space for the receiver. While following your videos I was able to simulate a setup with a TRX4 2 speed trans, both diff locks (yes I found out there are labels already in there for that) lights, and winch control. my test rig also has a combo of digital and analog servos. I just want you to know you helped this guy over here in USA a great deal and I really appreciate what you are doing on here.

[@WTFRCCars]

Happy to help and thanks 👍

[@thatoneguy2756]

Thank you for the info Craig! Very informative. I watched the entire video and I have a few questions still. 1. Do you know what the hz is for hobbywing quicrun esc lineup? 2. If your digital servo doesn't specify hz rating is it ok just to leave the transmitter on the default 400hz setting or should i go down to 333hz. 3. Can you do a video on how to change the screen protector. Mine came with a bubble and i dont want to scratch my screen trying to change it.

[@WTFRCCars]

So almost all digital servos can run 333hz to 400gz no issues at all so leaving at 400hz is fine, the quick run series should all be fine it 400hz digital I have run this one many without issues, as for the screen protector it's just like a mobile phone just peal it off and drop the new one on if you start from on side then you should be able to get it on without bubbles :)

[@JSprayaEntertainment]

thanks , if i upgrade , i think im going with the new dumbo , and the receivers that have the gyro

[@WTFRCCars]

Be interesting to see how you get on with it, in the past Dumbo RC radios have suffered interference, run aways and not great latency so be interesting to see if things have improved :)

[@fossfamilyrc8066]

I have the new dumbo ddf 350 for my bashers and I haven't had any problems with runaways and latency the only problem I think they have is when there to close to the receiver just like the new radio master they both interfere when there to close u can make the car stop working it's weird but never had a problem with any of that...

[@WTFRCCars]

Nice to know :)

[@vinnyz34]

My nb4 firmware is still 2.0.85 and I can’t bind to my inr4 or gmr receivers. also cannot connect to laptop tried different cables and ports tried restarting with the nb4 still on and no luck. The firmware update and assistant does not show any connections. Do you have any solutions?

[@WTFRCCars]

If it's not being detected by the pc it's normally one of a few things, USB cable is just a charge cable not a data cable, the base battery is not fitted correctly on the radio so the data pins are not connected, the pc has very old usb drivers that don't fully support usb standard or have missing drivers from the pc, sometimes just connecting a usb hub and connecting the transmitter to that can help too

[@AntsRC]

Bit long but good information

[@WTFRCCars]

Yep lots of info and i could have made the vid longer lol

[@Infraction236]

whats thats on the dual antenna, on the cable?

[@WTFRCCars]

The bvd monitor cable ?

[@Infraction236]

@@WTFRCCars no the antenna have some black ends. Or they better than normal antenna

[@WTFRCCars]

There the flight receivers and yeh the do work better they have proper antennas not just wire

[@Infraction236]

@@WTFRCCars oh nice , I have the dual antenne ftr8b but not with those black antenna