Ford 3.5L EcoBoost Broken Exhaust Manifold Stud | Everything You Need to Know

  Рет қаралды 50,246

Flying Wrenches

Flying Wrenches

Күн бұрын

Пікірлер: 219
@pitholer
@pitholer 2 жыл бұрын
This guy and Ford Tech makuloco are the only Ford guys I listen to! Thanks for the content
@infinity3jif
@infinity3jif 2 жыл бұрын
Ford Boss Me?
@jgk10000
@jgk10000 2 жыл бұрын
Same
@gojudude
@gojudude 2 жыл бұрын
makuloco makes some comments that are not really correct but he's young. All in all I watch most of his vids too.
@pitholer
@pitholer 2 жыл бұрын
@@infinity3jif Ford boss me tends to add a lot of his own commentary and bias. Many of his videos are rants about how his job is hard. Everybody's job is hard
@randomgooglename
@randomgooglename 2 жыл бұрын
You forgot diesel tech ron and powerstroke tech talk with arod
@mm-wq4lc
@mm-wq4lc Жыл бұрын
When will you be uploading the parts list? Really needed please!
@systemsevil1
@systemsevil1 Жыл бұрын
owned a 2013 3.5 ecoboost (loved the truck overall) and due to this issue I will never again buy a truck or vehicle with a turbo, unless its for performance etc. Every thing you pointed out is exactly what happened to my truck, leaking coolant lines, bolts breaking in the back etc. I also had another issue I was able to fix myself, which was a blend air door actuator deep in the dash that broke. BTW, when I had this done about 6 months ago (in Cali) it cost me 4,000. I sold the truck right after, even though I "made money" on the sale, its still cost me 4k of my own money first. This should have been a legit recall, and fixed at the dealer/manufacturers expense.
@drumminggoose444
@drumminggoose444 Жыл бұрын
Tbf it mostly depends on the engine. My 2.0 ecoboost has been excellent for me
@94jettameowpsst
@94jettameowpsst Жыл бұрын
This is normal wear and tear imo. I have a 5.7 jeep that can’t keep manifold studs to save its life. Every turbo car I’ve ever owned breaks studs - it’s just from heat cycling and cheap material.
@youtubecarspottersguide1
@youtubecarspottersguide1 11 ай бұрын
@@94jettameowpsst my ram 5.7 same if I drive it every day never hear it as I use it now just drive it on weekends
@FleetTech97
@FleetTech97 9 ай бұрын
It’s pretty normal my cohost f150 has been great. I would buy the same year again. It needs all the repairs he mentioned but my truck also has 150k miles and I haven’t spent a dime on the truck. Only oil changes
@ThatVato-sd7cw
@ThatVato-sd7cw 4 ай бұрын
Im going through alll these issues as we speak. At the moment im havn the coolant turbo line replaced. And next is the exhaust manifolds. Total ill b a tad bit over 3k just on that. Smh love my truck. Love everything about it. Keeping it because it just my weekend vehicle. But damn what a pricey repair
@RobertJarvis-k1f
@RobertJarvis-k1f Жыл бұрын
Can we get the parts list that you recommend please?
@Fun4GA
@Fun4GA Ай бұрын
For $4k, I would have had a shop do this, but the shop I went to wanted: >$900 for Water Pump Replacement; $500 for Cooling System Service; $5k for the manifold. That $6,500, so I’ll just do it and upgrade to the BD Diesel manifolds (with 11 studs and spacers for expansions) and save over five grand - lest my time and effort. I appreciate your video!
@Tiarpita
@Tiarpita Жыл бұрын
Extra,extra read all about it! ….I have a 2005 Ford e150 with 4.6 liter that has that exact same problem. (2 furthest back exhaust studs on passenger side broken causing a leak). Enter KAP (Kral Auto Parts LLC)…..they manufacture brackets that bolt onto empty, threaded holes on the head and then clamp down on the manifold to re-create a seal. I ordered one and it worked! Only took 45 minutes to install and only cost $73.00 including tax and shipping. Did not have to lift the motor or remove any parts. Genius invention!!
@scottwillis5434
@scottwillis5434 Жыл бұрын
F-150 is not listed on their website. Have a part number?
@scottwillis5434
@scottwillis5434 Жыл бұрын
Any chance of a parts list?
@goldenratio5117
@goldenratio5117 Жыл бұрын
First thing i did with my 1st gen 3.5L was swap exhaust manifolds to CRperformance full bore pollished manifolds. That with chip/ tune and exhaust really woke the truck up.
@trevorwilliams3811
@trevorwilliams3811 3 ай бұрын
The Ford dealership here in central Utah tried to blame this exact problem on anything and everything but this! Once I heard that sound I knew that is what was going on with my truck! Glad I got this diagnosed, just had it fixed by a mechanic buddy and only paid $2,100 for this fix. You guys rock! This sound is hard to explain lol. Keep up the good work!
@BOYDGILLEY
@BOYDGILLEY 2 жыл бұрын
Not seen anyone work on these trucks with the cabs raised up Makes so much sense!
@anthonybutterbaugh4252
@anthonybutterbaugh4252 2 жыл бұрын
I’ve got a cab off of a 16 right now. Decided to go that route after watching your videos, so far it’s been gravy with everything out in the open.
@FlyingWrenches13
@FlyingWrenches13 2 жыл бұрын
So much easier
@shiniquajones2812
@shiniquajones2812 Жыл бұрын
What is the part number on the manifold? I’ve heard that ford is trying to sell the old ones to people even though they ask for the new style ones.
@acase11
@acase11 Жыл бұрын
@@shiniquajones2812I’ve been wondering this same exact thing….
@TD16V
@TD16V 9 ай бұрын
For the RH manifold at least, the older PN was BL3Z-9431-B and the revised one is BL3Z-9431-D . . . Same PN apart from suffix D for the later version.
@TD16V
@TD16V 9 ай бұрын
@@acase11 BL3Z-9431-D
@michaelgood1791
@michaelgood1791 2 жыл бұрын
Grand slam home run again sir. Thank you for the content, much respect for you keeping the content clean so thag ithg can be used by teachers in a classroom setting.
@FlyingWrenches13
@FlyingWrenches13 2 жыл бұрын
Thank you!
@maverick_philos
@maverick_philos Жыл бұрын
Thanks!
@hannahpeeters5454
@hannahpeeters5454 Жыл бұрын
I’m having this issue with my truck and you helped me to fully understand it, thank you! Getting it repaired asap so I can keep my beloved 2013 on the road.
@plumbcartel6779
@plumbcartel6779 Жыл бұрын
Same on my "new to me" 2013, how many miles you got on yours?
@Dwmckay
@Dwmckay Жыл бұрын
My 2013 ecoboost has 307k miles, I bought it in December 2013 as a demo with 4k miles, it is a supercrew, 4x4 with 3.55 rear axle, I had a issue with the timing chain, I had local dealer fix timing issue, @ 92k miles, my only issue with mine that has been a revolving issue is the volume of spark plugs that will loose there gap, I have just picked up a bad manifold leak, I am preparing myself to fix everything truck needs now. I have a 22 6.7 reg cab f350 srw 4x4 I drive as my daily for work and everything, I really appreciate your videos, I find serious value in them, there are too many ppl on KZbin that think they know something, but what you have illustrated is that your experience and education on said vehicles I believe you have a level of excellence and experience that is beyond reproach. I’m in Huntsville AL and I would like you to do the repairs on my 2013 f150.
@lakeeriebrawler1764
@lakeeriebrawler1764 2 жыл бұрын
Is it possible to do this repair without lifting the body off the frame? Or are you pretty much screwed without a 4 post lift?
@louisianarebeltv4878
@louisianarebeltv4878 2 жыл бұрын
6:28 its optional
@angelgomez2013
@angelgomez2013 10 ай бұрын
I caught that intro sneaky guy! Thank you for the lessons. I couldn’t have done my work without your knowledge.
@markbulva4188
@markbulva4188 2 жыл бұрын
Got both those issues on my 14 150. And the leaking turbo coolant fittings and degas bottle. Have mishimoto all aluminum radiator and degas tank, BD diesel manifolds and garret stage 1 power ax turbos, vacuum pump and all new coolant hoses and lines ready to go. Deciding on which turbo back exhaust system to finish it all off. Leaning to the spd hi flow y pipe and hx series cat back w stage 2 resonator. Wondering flying wrench given my plans would you still lift the cab? Love the channel all the way from Canada.
@3dPrince4u
@3dPrince4u Жыл бұрын
WHERES THIS PARTS LIST WHAT IS THE REVISED MANIFOLD PN????
@CeltonHayden
@CeltonHayden 7 ай бұрын
replaced mine this week with BD Diesel manifolds. All turbo lines and connectors too. 4 days of hell but worth the peace of mind I have now.
@edanderson924
@edanderson924 7 ай бұрын
Is there a bolt hole already in the block pre drilled for the BD?
@CeltonHayden
@CeltonHayden 7 ай бұрын
@@edanderson924 yes. all 11 stud holes are already in the block. the oem uses only 8. there updated oem uses 9 I think. hope I am answering your question.
@kevo23_23
@kevo23_23 2 ай бұрын
I was thinking about getting my manifolds with them to , do you recommend?
@CeltonHayden
@CeltonHayden 2 ай бұрын
@@kevo23_23 yes 100%. IF you DIY it, ice you get past the take off part of the job, the BD's went on easy. FYI - learn from my mistake: watch which end of the new bolts you tighten into the block. I put one in upside down and could have damaged the block.
@billrimmer5596
@billrimmer5596 2 жыл бұрын
One day I wanna pull a cab. When I do, I’ll b checking your vids.
@flightmedic7169
@flightmedic7169 Ай бұрын
Happen to have the list of all the parts needed for this ? I need to do both sides but have heard you need some gaskets and other things? I have a 2015 3.5. Thanks
@erikrunas226
@erikrunas226 2 жыл бұрын
Thanks for listing other components you would change while the cab is off. Good video.
@paulmoreno3980
@paulmoreno3980 2 жыл бұрын
Thanks a lot brother. Hopefully more videos u put out on 2015 ford f150 eco boost will help me diy. I just changed out my #3 ignition coil and all spark plugs. I saved hundreds of $. I’m a first time truck owner n bought this 2015 ford f150 lariat eco boost
@TheLawlessGang
@TheLawlessGang Жыл бұрын
how many miles u got on ur 15
@SolarBurrito
@SolarBurrito Жыл бұрын
Happening to me on my 15' at 86k miles. Have a broken stud on each side. ONly squeek noise on passenger side. Dealer says I need both. Quoted $4700 for repair.@@TheLawlessGang
@hialeahhigh
@hialeahhigh 2 жыл бұрын
Men i used motorcraft oil filters on my fords. Decided to cut one fl500s open and found the paper media where it meats and its glued together "others use a metal plate that holds the paper media besides the glue" and i found it apart from it other, it came undone. That was scary 😨... and at a 4500 mile interval. Dont know what to think of motorcraft oil filters any more
@kenj.8897
@kenj.8897 2 жыл бұрын
Yeah motorcraft filters are now junk. The 820s have such wide pleating that they tear
@teddymullins3706
@teddymullins3706 2 жыл бұрын
The phaser problem that ford had with the 3.5 l What year did they update the phasers to get rid of that Phaser problem start up rattle
@GiveMeDivys
@GiveMeDivys 2 ай бұрын
This is the noise I am hearing from my 2016 F-150. In my most recent visit to the dealership, which did not diagnose this noise to this issue did mention my water pump may need to be replace. Can you point me to the list of parts you suggested to also replace? I would love to do this and the preventative maintenance all in one shot.
@floridadawg9857
@floridadawg9857 2 жыл бұрын
Enjoying your channel..... Keep'em coming. BTW I Love the 3.5 had a 14 and now a 22 model.
@thehonestmotorcyclist7672
@thehonestmotorcyclist7672 Жыл бұрын
Great video thank you! Could you post a link to where I can buy the updated exhaust manifold?
@christjesusfollower4156
@christjesusfollower4156 2 жыл бұрын
Yup... I have a 2015 transit with the same problem with 128500 miles on it... I bought the bd diesel upgraded manifolds... also replacing turbos, all coolant pipes a0nd oil supply fittings to the turbos and coolant tubes and fittings...timing chains.. tensioners.. water pump.. phasers.. oil pump.. fuel rails and injectors... coils and spark plugs... im pretty much at about 3500 in parts and saving labor doing it all myself. It's going to be fun. I cand remove the cab.. im removing the entire front end of the van to gain access to both sides of the engine and front. Will be a load of fun.
@CrowdKillerSN95
@CrowdKillerSN95 4 ай бұрын
I’m assuming this applies to Taurus SHO’s ?
@tannerdog9130
@tannerdog9130 Ай бұрын
Can you program the F150 to not put so much pressure? and use the turbos less?
@ninja11zx
@ninja11zx 6 ай бұрын
Is the hole in the fead for the updated manifold?
@johnminyard164
@johnminyard164 Жыл бұрын
What a great video.... this is the exact issue i am having with my 2011 F150 ecoboost. Turbo's, down pipe and y pipe have all been replaced and still making this noise. Thank you!!
@hialeahhigh
@hialeahhigh 2 жыл бұрын
Still planning on doing a video about the waste gate rattle on the gen2 3.5 ecoboosts?
@dR00Ck
@dR00Ck Жыл бұрын
Just had both of mine replaced. Driver side was about 1/8 and the passenger was about 1/4 in off straight. Current central California price was $5,200!! Could probably have done it myself, but not enough time to do it. Would you recommend a break in period for these, or driving easy on it for a certain amount of miles? A re-check of the bolts at some point?
@patrickkiggins4150
@patrickkiggins4150 Жыл бұрын
I have a 2015 3.5 Ecoboost with 104,000, I believe left side is leaking coolant at the turbocharger, otherwise I have not had any problems with this truck. I like the idea of getting the cab off the frame and replacing both turbochargers, coolant lines, manifords, bolts and whatever else you have suggested in this video all at the same time. So if I bring this truck into the dealership where you work how long does it take once the work gets started?
@joshuaenyart5570
@joshuaenyart5570 6 ай бұрын
If you are doing this job, any kind of servicing on the turbos while you have them off?
@mtl1978
@mtl1978 Жыл бұрын
Well that made it easy to show my buddy why his truck makes noise. thanks!
@jessevanderleest6787
@jessevanderleest6787 Жыл бұрын
Dude! I love you! This is a well done video and very informative. I figured it was a manifold leak. That noise is driving me crazy.
@davidclark2034
@davidclark2034 Жыл бұрын
My 13 f150 is making a strange intermittent noise from the driver side but it's not whistling. it's a deck of cards shuffling kind of sound that comes and goes with acceleration. I left you another comment on another video letting you know I've replace the rid bearings in my motor. now I'm thinking of pulling the turbos when it warms up a little. I purchased bd manifolds, low mileage turbos, stainless lines with fittings and im thinking of upgrading the turbo cartridges or getting new balanced assemblies from c&r while I'm doing this. I won't be pulling the cab because I found a fairly simple way to replace the rear fittings without doing it. After eliminating most of the oil leaks I think my passenger valve cover is leaking after installing a new vacuum pump yesterday .
@joshshobe7896
@joshshobe7896 Ай бұрын
Can you post the parts list we all keep asking for please?!
@adventure.anywhere
@adventure.anywhere 3 ай бұрын
My 15 F150 has broken studs on the rear on both manifolds... was quoted $3900 at the Ford dealer in Mi to replace the manifolds and studs. I asked the guy at the desk about the updated manifold with the extra stud and he had no idea what I was talking about...
@walkingeagle6237
@walkingeagle6237 Жыл бұрын
"everything you need to know" yup I'd say you hit the mark on that statement, good video
@MrJord1994
@MrJord1994 7 ай бұрын
Is this an issue on the transverse mounted engines as well?
@flightmedic7169
@flightmedic7169 10 күн бұрын
Ever get that part list ?
@davidchennellsjr.6799
@davidchennellsjr.6799 Жыл бұрын
How much horsepower can the new manifolds take? Should I go with full race manifold or BD diese or crp. I'm thinking about upgrading turbos too garret at and the and time
@Smomobiler
@Smomobiler 8 ай бұрын
My Expedition is nearing 150,000 miles. No exhaust issues (yet) but I'm seeing a very small drip of oil once in a while. Not sure if it's the turbos or oil pan. My question is should I be proactive and do a full overhaul with timing chain, water pump, turbos and exhaust manifolds or wait till one fails?
@nigeljones6747
@nigeljones6747 Жыл бұрын
Where can I find the parts list? Thank you.
@danielmarjanovic9957
@danielmarjanovic9957 Жыл бұрын
I have an f150 ecoboost. Replaces manifold and turbos. Replsced all line except the drivers coolant line that runs to the back of engine…. How do I replace the fitting in back and attach the line on back???
@jonkilpatrick8055
@jonkilpatrick8055 8 ай бұрын
I thought you had to be in Alabama ! Me to ! N E of Bham . I could drop my truck off on the way to Gulf Shores. 2015 3.5 ecoboost it needs everything you listed. Oil changes and recall on the master cyl all that's been done I am aware of.
@toddfiedler7513
@toddfiedler7513 11 ай бұрын
If you could only replace this combo or the engine valve covers, which one would take priority? Which has the greatest impact for performance and engine health?
@TravisBateman-v3v
@TravisBateman-v3v Жыл бұрын
Good Video. Helped me figure out what my truck is doing. Looks like I have some work ahead of me.
@DavidJohnson-ph8dl
@DavidJohnson-ph8dl 11 ай бұрын
Where are the links to buy everything you mentioned to get?
@gerardkavanagh144
@gerardkavanagh144 2 жыл бұрын
Well presented Sir; information with occassioanl sense of humour. Thank You.
@DoddMichael
@DoddMichael Жыл бұрын
Great video …liked and subscribed😉 just a question of clarification did you state that the new manifold with the extra stud bolt up onto the existing G1 head?
@catfish500mark9
@catfish500mark9 2 жыл бұрын
Just curious as to how long it takes to remove the cab.That might be a vid worth making as well.Just a thought.
@TheScottfourty4
@TheScottfourty4 Жыл бұрын
I remember that in a previous video, he said he has the process down to roughly 45 minutes.
@jamesschutte708
@jamesschutte708 Жыл бұрын
Flying Wrenches what’s the updated manifold part numbers for l&r sides? I just looked 30 seconds ago and I indeed have a broken rear stud on the driver side.
@MrLocomechanic
@MrLocomechanic Жыл бұрын
I agree with everything youre replacing except i would use, whih i did use and are currently using, that is db diesel manifolds which give you 11 mounting holes and bigger ports.
@BOYDGILLEY
@BOYDGILLEY 2 жыл бұрын
I am always looking for great content LIKE Ford tech Makuloco I get the most precise info ANYWHERE!!! and you are not an idiot because you two show how to do a proper service...
@jessestites2098
@jessestites2098 Жыл бұрын
What’s the similarity with the sho/mks awd eco boost? Can I do the upgraded manifolds?
@jarad0714
@jarad0714 2 жыл бұрын
I thank u so much for all the videos u make. It definitely helps me when I’m looking for a new vehicle and what to look for.
@BradWhobrey-zp5gs
@BradWhobrey-zp5gs 10 ай бұрын
What's your opinion on changing the cam phasers and chain wail you have the cab off this repair on a 2015
@edgargonzalez2934
@edgargonzalez2934 Жыл бұрын
Mine makes a noise when I’m going faster but it don’t do it if I’m parked , does it when I’m driving around and only when I’m at a certain speed and accelerating certain amount , and if I hit it harder it goes away and does it again if I press it again sometimes
@SolarBurrito
@SolarBurrito Жыл бұрын
Happening to me on my 15' at 86k miles. Have a broken stud on each side. Only turbo squeak noise on passenger side. Dealer says I need both. Quoted $4700 for repair.
@mikeshelton5629
@mikeshelton5629 Жыл бұрын
Hi, love the channel. If you were buying an F150, would you hunt a particular used year or new? Which engine do ypu think is the most reliable?
@kendavis1198
@kendavis1198 2 жыл бұрын
HEY MAYSON..... There you are. Great Video once again. Man Pulling that Cab Off, Piece a Cake for you now day's. As an F-150 Owner, 2022 New Truck, It's Scary, Just seems like a LOT Can go wrong there. Like, New Noise's, Bolt's Left Loose, Wires Pinched??? Man. I don't know about that. Looks like a GREAT way to Expose stuff that would otherwise Not be very accessible at all. And All those Part's to replace, I would also replace that stuff! It's Buried and too difficult to go back a 2nd time. Do it Once, Do it Right!!!
@MoisesMartinez-dw6yb
@MoisesMartinez-dw6yb Жыл бұрын
I have a 2.7 EcoBoost and it sounds like a kazoo when I accelerate the stops. Turbo has been replaced but still sounds the same.
@JohnValenti-e8s
@JohnValenti-e8s Жыл бұрын
Would you happen to have the parts list?
@jesusberlanga4346
@jesusberlanga4346 2 жыл бұрын
Everything i needed to know quickly with no bs.....great video man
@jefferynelson7195
@jefferynelson7195 2 жыл бұрын
From watching your videos, is it correct that the 2021 and up 3.5L Eco Boost are the ones to get? In your other video, you mentioned the phasers were redesigned in the 2021and newer, correct? You make great videos, man...keep up the good work!
@jason91205
@jason91205 2 жыл бұрын
Mayson, I have p0420 and p0430. Replaced with magnaflow weld in converters and the codes are back/still there. On this ecoboost (mine is 2015) what do you usually see cause that code? My friend worked for a ford dealership going to hook to scanner to make sure 02’s are doing what they should but he said he’s never seen those codes be a 02 sensor. He said it may not like those cats. Any help would be appreciated. Thanks in advance.
@jeremyclemente99
@jeremyclemente99 2 жыл бұрын
I know you can lift the cab or even do it through the fenders have you done it both ways? I like lifting the cab but sometimes I do it from the fenders too!
@CocoPrado-ok2wy
@CocoPrado-ok2wy 6 ай бұрын
If you can help, where can I order the new exaust manifold?
@rangercwgbear6352
@rangercwgbear6352 Жыл бұрын
I’m being told that I’ve had this air pump $700 and now the cable covers $1100 there saying that the rear main seal could be leaking what’s the likely hold of this at 150000 miles and the truck runs great could you show a rear main replacement this is on a 2015 f150 3.5
@roamin-ws2vt
@roamin-ws2vt 10 ай бұрын
Hey there, great video! I've got the dreaded coolant leak out of the driver side turbo on my 2016 Expy (122k miles). Manifolds look okay but thinking of doing those at the same time. I'm seem aftermarket manifolds out there with up to 11 studs, instead of the 9 in the revised Ford OEM manifold. (See the guys at BD Diesel). Any thoughts on that option? Thanks again!
@robertc3190
@robertc3190 2 жыл бұрын
Mayson would due a video on the 2010 f150 5.4 3v pcv. How the pcv system works . Does it have a check valve? like a typical pcv system… tanks
@colliswilliams8992
@colliswilliams8992 2 жыл бұрын
Does anyone know the part numbers for the cooling tubes and connectors? There are three different sized connectors and three part numbers
@karmalifeheretodothework8872
@karmalifeheretodothework8872 Жыл бұрын
Videos on mks twin turbo.. Because aren't they different then f150 3.5
@jerryhickey904
@jerryhickey904 9 ай бұрын
What is the part number for the newer updated manifold?
@TD16V
@TD16V 9 ай бұрын
For the RH one it’s BL3Z-9431-D. Older part was BL3Z-9431-B So revised from suffix B to D
@richceglinski7543
@richceglinski7543 Жыл бұрын
You said you would leave us a parts list . Been 6 months ? That's what I picked your video. Good video though I may go back and write down what you said pretty fast.
@jpowell9343
@jpowell9343 10 ай бұрын
I drove f150s for 27years now. Refuse to by a eb. All that junk is trouble, ford always had manifold /bolt problems because of all the junk hanging off . There were 4 converters, and now it's 4 converters plus 2 turbos. My 5.0 has a broken manifold but easy to work on compared to this stuff. When warranty goes get rid of this stuff. All trouble waiting to happen.
@BrendarthGaming
@BrendarthGaming Жыл бұрын
I've heard that the turbos used are different in transversely mounted applications, do you know if that's true? If yes, do they also have both oil and coolant lines or just oil lines?
@richthornber8483
@richthornber8483 2 жыл бұрын
I currently have 2013 Ford F150 with 215,00 Exhaust manifold problem I'm looking to get a quote to get fixed. Can you list the other parts I should have replaced at the same time? Too bad I don't live near Alabama I would bring it to you. Thank you for you videos! Rich in the Pacific Northwest
@tomwakolbinger5116
@tomwakolbinger5116 Жыл бұрын
Your notes still say that parts list is coming. I need the Ford part number for that new exhaust manifold because I had mine replaced at the dealer last year and the studs are broken again. At the time the dealer rep said there was no upgrade part.
@scottwillis5434
@scottwillis5434 Жыл бұрын
Maybe the BD Diesel replacement?
@confiinfo3274
@confiinfo3274 Жыл бұрын
Where exactly in Alabama are you located? I have a 2011 F150 with the 3.5 ecoboost that needs some work done.
@tornado7738
@tornado7738 Жыл бұрын
Hey man love the videos. How far from Bham are you?
@martysheets6882
@martysheets6882 8 ай бұрын
Mayson you are quite the salesman.
@Qu13tM0n3y
@Qu13tM0n3y 2 жыл бұрын
You do any work with the 5.0l f150s?
@aaronelmore2147
@aaronelmore2147 2 жыл бұрын
Hey @Flying Wrenches! I've got a cab off in my bay and parts on back order,, whats a good aftermarket brand of valve covers for 14 and 17 f150s that you would recommend? Thanks.
@mavking5759
@mavking5759 2 жыл бұрын
Off topic but watch a lot of your videos, have you heard or diagnosed a weird chirp/bark from a 6r80 4-3 downshift and sometimes a 3-4 up shift?
@85Bow
@85Bow 4 ай бұрын
Hey brother where are you located in Alabama?
@eddiebroome82
@eddiebroome82 Ай бұрын
What shop do you work at?
@adamhorton3763
@adamhorton3763 Жыл бұрын
Would this cause a p0299 code?
@wanabgt
@wanabgt 2 жыл бұрын
how bad is it to get the broken studs out
@joanrodriguez5848
@joanrodriguez5848 2 жыл бұрын
Is the 2.7l ecoboost better than the 3.5l?
@kevo23_23
@kevo23_23 2 ай бұрын
Located in Houston tx , does anyone know a good mechanic to do this job?
@tourerv1jz
@tourerv1jz 2 жыл бұрын
do you use the genuine ford studs or is there a better aftermarket stud you recommend
@ppgav8r
@ppgav8r 5 ай бұрын
Great video, informative 🎉
@perrymiller9905
@perrymiller9905 Жыл бұрын
I dont see the parts you were going to add?
Ford 3.5 L Ecoboost exhaust manifold replacement
34:32
Tunnell Custom Garage
Рет қаралды 42 М.
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
We Attempted The Impossible 😱
00:54
Topper Guild
Рет қаралды 56 МЛН
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
Best Way to Remove Broken Exhaust Manifold Studs?
14:37
FordTechMakuloco
Рет қаралды 388 М.
Ford 2nd Gen 3.5L EcoBoost Common Failures Every Owner Needs to Know About!
21:44
Ford 3.5 Ecoboost cold start rattle noise
3:45
Class Key Productions
Рет қаралды 29 М.
The Most Common Oil Leak on Ford’s 3.5L EcoBoost | Vacuum Pump
6:54
Flying Wrenches
Рет қаралды 117 М.
Old Mechanic Trick To Removing Rusty Exhaust Manifold Bolts!
17:12
Stephen Cox
Рет қаралды 1 МЛН
Broken LS Exhaust Bolt Removal - Best Trick Ever!
13:56
Classic Nation
Рет қаралды 2,1 МЛН
Ford F150 leaking coolant at turbo? Everything You Need To Know
9:09
Flying Wrenches
Рет қаралды 77 М.
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН